ISO - ICS Category: 91 - Construction Materials and Building

ICS Category: ISO Standards for - ICS Water Supply Systems (91.140.60)


Add to Cart Document Number Document Title
$51.00 ISO 13844:2000 Plastics piping systems - Elastomeric-sealing-ring-type socket joints of unplasticized poly(vinyl chloride) (PVC-U) for use with PVC-U pipes - Test method for leaktightness under negative pressure
$209.00 ISO 22158:2011 Input/output protocols and electronic interfaces for water meters - Requirements
$185.00 ISO 4064-1:2014 Water meters for cold potable water and hot water - Part 1: Metrological and technical requirements
$189.00 ISO 4064-1:2005 Measurement of water flow in fully charged closed conduits - Meters for cold potable water and hot water - Part 1: Specifications
$232.00 ISO 4064-2:2014 Water meters for cold potable water and hot water - Part 2: Test methods
$88.00 ISO 4064-2:2005 Measurement of water flow in fully charged closed conduits - Meters for cold potable water and hot water - Part 2: Installation requirements
$209.00 ISO 4064-3:2014 Water meters for cold potable water and hot water - Part 3: Test report format
$240.00 ISO 4064-3:2005 Measurement of water flow in fully charged closed conduits - Meters for cold potable water and hot water - Part 3: Test methods and equipment
$138.00 ISO 4064-4:2014 Water meters for cold potable water and hot water - Part 4: Non-metrological requirements not covered in ISO 4064-1
$68.00 ISO 4064-5:2014 Water meters for cold potable water and hot water - Part 5: Installation requirements
$29.00 JIS S 3200-1:1997 Equipment to water supply service -- Test methods of hydrostatic pressure
$10.00 JIS S 3200-1:1997/AMENDMENT 1:2012 Equipment for water supply service -- Test methods of hydrostatic pressure (Amendment 1)
$10.00 JIS S 3200-5:1997/AMENDMENT 1:2012 Equipment for water supply service -- Test methods of destruction by vacuum pressure (Amendment 1)
$209.00 ISO 10639:2004 Plastics piping systems for pressure and non-pressure water supply - Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
$19.00 ISO 10639/Amd1:2011 Plastics piping systems for pressure and non-pressure water supply - Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin - Amendment 1
$45.00 ISO 11177:2016 Vitreous and porcelain enamels - Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply - Quality requirements and testing
$45.00 ISO 13056:2011 Plastics piping systems - Pressure systems for hot and cold water - Test method for leaktightness under vacuum
$45.00 ISO 13844:2015 Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with plastic pressure pipes - Test method for leaktightness under negative pressure, angular deflection and deformation
$51.00 ISO 13845:2000 Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for leaktightness under internal pressure and with angular deflection
$123.00 ISO 14236:2000 Plastics pipes and fittings - Mechanical-joint compression fittings for use with polyethylene pressure pipes in water supply systems
$68.00 ISO 15874-1:2013 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1: General
$103.00 ISO 15874-2:2013 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes
$103.00 ISO 15874-3:2013 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings
$68.00 ISO 15874-5:2013 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 5: Fitness for purpose of the system
$68.00 ISO/TS 15874-7:2003 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 7: Guidance for the assessment of conformity
$68.00 ISO 15875-1:2003 Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 1: General
$19.00 ISO 15875-1/Amd1:2007 Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 1: General - Amendment 1
$68.00 ISO 15875-2:2003 Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 2: Pipes
$19.00 ISO 15875-2/Amd1:2007 Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 2: Pipes - Amendment 1
$68.00 ISO 15875-3:2003 Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings
$68.00 ISO 15875-5:2003 Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 5: Fitness for purpose of the system
$68.00 ISO/TS 15875-7:2003 Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 7: Guidance for the assessment of conformity
$68.00 ISO 15876-1:2017 Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 1: General
$88.00 ISO 15876-1:2003 Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 1: General
$22.00 ISO 15876-1/Amd1:2007 Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 1: General - Amendment 1
$103.00 ISO 15876-2:2017 Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 2: Pipes
$88.00 ISO 15876-2:2003 Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 2: Pipes
$22.00 ISO 15876-2/Amd1:2007 Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 2: Pipes - Amendment 1
$103.00 ISO 15876-3:2017 Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings
$88.00 ISO 15876-3:2003 Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 3: Fittings
$68.00 ISO 15876-5:2017 Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 5: Fitness for purpose of the system
$88.00 ISO 15876-5:2003 Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 5: Fitness for purpose of the system
$68.00 ISO/TS 15876-7:2003 Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 7: Guidance for the assessment of conformity
$68.00 ISO 15877-1:2009 Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: General
$19.00 ISO 15877-1/Amd1:2010 Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: General - Amendment 1
$103.00 ISO 15877-2:2009 Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Pipes
$19.00 ISO 15877-2/Amd1:2010 Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Pipes - Amendment 1
$138.00 ISO 15877-3:2009 Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings
$19.00 ISO 15877-3/Amd1:2010 Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings - Amendment 1
$68.00 ISO 15877-5:2009 Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 5: Fitness for purpose of the system
$19.00 ISO 15877-5/Amd1:2010 Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 5: Fitness for purpose of the system - Amendment 1
$185.00 ISO 16631:2016 Ductile iron pipes, fittings, accessories and their joints compatible with plastic (PVC or PE) piping systems, for water applications and for plastic pipeline connections, repair and replacement
$68.00 ISO 21003-1:2008 Multilayer piping systems for hot and cold water installations inside buildings - Part 1: General
$103.00 ISO 21003-2:2008 Multilayer piping systems for hot and cold water installations inside buildings - Part 2: Pipes
$19.00 ISO 21003-2/Amd1:2011 Multilayer piping systems for hot and cold water installations inside buildings - Part 2: Pipes - Amendment 1
$68.00 ISO 21003-3:2008 Multilayer piping systems for hot and cold water installations inside buildings - Part 3: Fittings
$68.00 ISO 21003-5:2008 Multilayer piping systems for hot and cold water installations inside buildings - Part 5: Fitness for purpose of the system
$103.00 ISO/TS 21003-7:2008 Multilayer piping systems for hot and cold water installations inside buildings - Part 7: Guidance for the assessment of conformity
$19.00 ISO/TS 21003-7/Amd1:2010 Multilayer piping systems for hot and cold water installations inside buildings - Part 7: Guidance for the assessment of conformity - Anendment 1
$68.00 ISO 22391-1:2009 Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 1: General
$103.00 ISO 22391-2:2009 Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 2: Pipes
$103.00 ISO 22391-3:2009 Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings
$68.00 ISO 22391-5:2009 Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 5: Fitness for purpose of the system
$103.00 ISO/TS 22391-7:2011 Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 7: Guidance for the assessment of conformity
$68.00 ISO 23711:2003 Elastomeric seals - Requirements for materials for pipe joint seals used in water and drainage applications - Thermoplastic elastomers
$209.00 ISO 25780:2011 Plastics piping systems for pressure and non-pressure water supply, irrigation, drainage or sewerage - Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin - Pipes with flexible joints intended to be installed using jacking techniques
$45.00 ISO/TR 27165:2012 Thermoplastics piping systems - Guidance for definitions of wall constructions for pipes
$45.00 ISO 3114:1977 Unplasticized polyvinyl chloride (PVC) pipes for potable water supply - Extractability of lead and tin - Test method
$138.00 ISO 3822-1:1999 Acoustics -- Laboratory tests on noise emission from appliances and equipment used in water supply installations -- Part 1: Method of measurement
$19.00 ISO 3822-1/Amd1:2008 Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 1: Method of measurement - Amendment 1: Measurement uncertainty
$45.00 ISO 3822-2:1995 Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 2: Mounting and operating conditions for draw-off taps and mixing valves
$68.00 ISO 3822-3:1997 Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 3: Mounting and operating conditions for in-line valves and appliances
$19.00 ISO 3822-3/Amd1:2009 Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 3: Mounting and operating conditions for in-line valves and appliances - Amendment 1
$138.00 ISO 3822-4:1997 Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 4: Mounting and operating conditions for special appliances
$185.00 ISO/TR 4191:2014 Plastics piping systems for water supply - Unplasticized poly(vinyl chloride)(PVC-U) and oriented PVC-U (PVC-O) - Guidance for installation
$103.00 ISO 4427-2:2007 Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - Part 2: Pipes
$19.00 ISO 4427-2:2007/Amd1:2014 - Amendment 1
$162.00 ISO 4427-3:2007 Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - Part 3: Fittings
$68.00 ISO 4633:2015 Rubber seals - Joint rings for water supply, drainage and sewerage pipelines - Specification for materials
$88.00 ISO 4633:2002 Rubber seals - Joint rings for water supply, drainage and sewerage pipelines - Specification for materials
$103.00 ISO 559:1991 Steel tubes for water and sewage
$103.00 ISO 8795:2001 Plastics piping systems for the transport of water intended for human consumption -- Migration assessment -- Determination of migration values of plastics pipes and fittings and their joints
$10.00 JIS K 6787:2004/AMENDMENT 2:2013 Crosslinked polyethylene (PE-X) pipes for water supply (Amendment 2)
$15.00 JIS S 3200-7:2004/AMENDMENT 2:2010 Equipment for water supply service -- Test methods of effect to water quality (Amendment 2)
$209.00 ISO 10639:2017 Plastics piping systems for pressure and non-pressure water supply - Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
$68.00 ISO 3822-3:2018 Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 3: Mounting and operating conditions for in-line valves and appliances
$68.00 ISO 10508:2006 Plastics piping systems for hot and cold water installations - Guidance for classification and design
$45.00 ISO 13845:2015 Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with thermoplastic pressure pipes - Test method for leaktightness under internal pressure and with angular deflection
$51.00 ISO 13845:2000 Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for leaktightness under internal pressure and with angular deflection
$68.00 ISO 1452-1:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: General
$138.00 ISO 1452-2:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Pipes
$185.00 ISO 1452-3:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 3: Fittings
$68.00 ISO 1452-4:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 4: Valves
$103.00 ISO 1452-5:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 5: Fitness for purpose of the system
$103.00 ISO/TS 15877-7:2009 Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 7: Guidance for the assessment of conformity
$138.00 ISO 16422:2014 Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure - Specifications
$209.00 ISO 2531:2009 Ductile iron pipes, fittings, accessories and their joints for water applications
$103.00 ISO 4427-1:2007 Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - Part 1: General
$19.00 ISO 4427-1:2007/Amd1:2015 - Amendment 1: Melt mass-flow rate (MFR) for PE 80 and PE 100
$68.00 ISO 4427-5:2007 Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - Part 5: Fitness for purpose of the system
$9.00 JIS K 6770:2004/AMENDMENT 3:2010 Crosslinked polyethylene (PE-X) pipe fittings (Amendment 3)
$10.00 JIS K 6777:2007/AMENDMENT 2:2010 Chlorinated poly (vinyl chloride) (PVC-C) pipe fittings for hot and cold water supply (Amendment 2)
$10.00 JIS K 6779:2004/AMENDMENT 2:2010 Polybutene (PB) pipe fittings (Amendment 2)
$9.00 JIS K 6788:2004/AMENDMENT 2:2010 Crosslinked polyethylene (PE-X) pipe fittings for water supply (Amendment 2)
$10.00 JIS K 6793:2004/AMENDMENT 2:2010 Polybutene (PB) pipe fittings for water supply (Amendment 2)