ISO - ICS Category: 25 - Manufacturing Engineering

ICS Category: ISO Standards for - ICS Tool Workpiece Holding Devices (25.060.20)


Add to Cart Document Number Document Title
$45.00 ISO 10649-1:2013 Cutter arbors with parallel key and tenon drive - Part 1: General dimensions
$45.00 ISO 10649-2:2013 Cutter arbors with parallel key and tenon drive - Part 2: Dimensions and designation of tool holders with taper interface with flange contact surface
$45.00 ISO 10649-3:2013 Cutter arbors with parallel key and tenon drive - Part 3: Dimensions and designation of tool holders with 7/24 taper for automatic tool changer
$45.00 ISO 10649-4:2013 Cutter arbors with parallel key and tenon drive - Part 4: Dimensions and designation of tool holders with 7/24 taper without automatic tool changer
$45.00 ISO 10649-5:2012 Cutter arbors with parallel key and tenon drive - Part 5: Dimensions and designation of tool holders with polygonal taper interface with flange contact surface
$45.00 ISO 10649-6:2012 Cutter arbors with parallel key and tenon drive - Part 6: Dimensions and designation of tool holders with modular taper interface with ball track system
$45.00 ISO 1080:1975 Machine tools - Morse taper shanks - Cotter slots with taper keys
$68.00 ISO 10889-1:2004 Tool holders with cylindrical shank - Part 1: Cylindrical shank, location bore - Technical delivery conditions
$45.00 ISO 10889-2:2016 Tool holders with cylindrical shank - Part 2: Type A, shanks for tool holders of special designs
$51.00 ISO 10889-2:2004 Tool holders with cylindrical shank - Part 2: Type A, shanks for tool holders of special designs
$68.00 ISO 10889-3:2016 Tool holders with cylindrical shank - Part 3: Type B with rectangular radial seat
$88.00 ISO 10889-3:2004 Tool holders with cylindrical shank - Part 3: Type B with rectangular radial seat
$68.00 ISO 10889-4:2016 Tool holders with cylindrical shank - Part 4: Type C with rectangular axial seat
$88.00 ISO 10889-4:2004 Tool holders with cylindrical shank - Part 4: Type C with rectangular axial seat
$45.00 ISO 10889-5:2016 Tool holders with cylindrical shank - Part 5: Type D with more than one rectangular seat
$51.00 ISO 10889-5:1997 Tool holders with cylindrical shank - Part 5: Type D with more than one rectangular seat
$68.00 ISO 10889-6:2016 Tool holders with cylindrical shank - Part 6: Type E with cylindrical seat
$88.00 ISO 10889-6:2004 Tool holders with cylindrical shank - Part 6: Type E with cylindrical seat
$45.00 ISO 10889-7:2016 Tool holders with cylindrical shank - Part 7: Type F with taper seat
$51.00 ISO 10889-7:2004 Tool holders with cylindrical shank - Part 7: Type F with taper seat
$45.00 ISO 10889-8:1997 Tool holders with cylindrical shank - Part 8: Type Z, accessories
$68.00 ISO 10897:2016 Collets for tool holders with taper ratio 1:10 - Collets, holders, nuts
$88.00 ISO 10897:1996 Collets for tool holders with taper ratio 1:10 - Collets, hoders,nuts
$68.00 ISO 12164-1:2001 Hollow taper interface with flange contact surface - Part 1: Shanks - Dimensions
$45.00 ISO 12164-2:2001 Hollow taper interface with flange contact surface - Part 2: Receivers - Dimensions
$68.00 ISO 12164-3:2014 Hollow taper interface with flange contact surface - Part 3: Dimensions of shanks for stationary tools
$88.00 ISO 12164-3:2008 Hollow taper interface with flange contact surface - Part 3: Dimensions of shanks for stationary tools
$45.00 ISO 12164-4:2014 Hollow taper interface with flange contact surface - Part 4: Dimensions of receivers for stationary tools
$66.00 ISO 12164-4:2008 Hollow taper interface with flange contact surface - Part 4: Dimensions of receivers for stationary tools
$68.00 ISO 15488:2003 Collets with 8 degree setting angle for tool shanks - Collets, nuts and fitting dimensions
$68.00 ISO 238:2016 Reduction sleeves and extension sockets for tools with Morse taper shanks
$51.00 ISO 238:1974 Reduction sleeves and extension sockets for tools with Morse taper shanks
$68.00 ISO 26622-1:2008 Modular taper interface with ball track system - Part 1: Dimensions and designation of shanks
$45.00 ISO 26622-2:2008 Modular taper interface with ball track system - Part 2: Dimensions and designation of receivers
$68.00 ISO 26623-1:2014 Polygonal taper interface with flange contact surface - Part 1: Dimensions and designation of shanks
$88.00 ISO 26623-1:2008 Polygonal taper interface with flange contact surface - Part 1: Dimensions and designation of shanks
$45.00 ISO 26623-2:2014 Polygonal taper interface with flange contact surface - Part 2: Dimensions and designation of receivers
$58.00 ISO 26623-2:2008 Polygonal taper interface with flange contact surface - Part 2: Dimensions and designation of receivers
$45.00 ISO 296:1991 Machine tools - Self-holding tapers for tool shanks
$45.00 ISO 297:1988 7/24 tapers for tool shanks for manual changing
$45.00 ISO 299:1987 Machine tool tables - T-slots and corresponding bolts
$68.00 ISO 3089:2005 Machine tools - Test conditions for self-centring, manually operated chucks with one-piece jaws
$68.00 ISO 3442-1:2005 Machine tools - Dimensions and geometric tests for self-centring chucks with two-piece jaws - Part 1: Manually operated chucks with tongue and groove type jaws
$68.00 ISO 3442-2:2005 Machine tools - Dimensions and geometric tests for self-centring chucks with two-piece jaws - Part 2: Power-operated chucks with tongue and groove type jaws
$103.00 ISO 3442-3:2007 Machine tools - Dimensions and geometric tests for self-centring chucks with two-piece jaws - Part 3: Power-operated chucks with serrated jaws
$45.00 ISO 3936:1993 Reduction sleeves with tenon drive with external and internal 7/24 taper - Dimensions
$45.00 ISO 3937-1:2008 Cutter arbors with tenon drive - Part 1: Dimensions of Morse taper
$68.00 ISO 3937-2:2008 Cutter arbors with tenon drive - Part 2: Dimensions of 7/24 taper
$45.00 ISO 3937-3:2008 Cutter arbors with tenon drive - Part 3: Dimensions of hollow taper interface with flange contact surface
$45.00 ISO 4202:2016 Reduction sleeves with external 7/24 taper for tools with Morse taper shanks
$51.00 ISO 4202:1978 Reduction sleeves with external 7/24 taper for tools with Morse taper shanks
$45.00 ISO 4207:2016 Counterbores with Morse taper shanks and detachable pilots
$51.00 ISO 4207:1977 Counterbores with Morse taper shanks and detachable pilots
$68.00 ISO 4248:1978 Jig bushes - Definitions and nomenclature
$45.00 ISO 5413:1993 Machine tools - Positive drive of Morse tapers
$45.00 ISO 5414-1:2002 Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools - Part 1: Dimensions of the driving system of tool shanks
$68.00 ISO 5414-2:2002 Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools - Part 2: Connecting dimensions of chucks and designation
$45.00 ISO 5415:2007 Reduction sleeves with 7/24 external and Morse internal taper and incorporated screw
$68.00 ISO 5734:1986 Acceptance conditions of mechanical dividing heads for machine tools - Testing of accuracy
$45.00 ISO 702-1:2009 Machine tools - Connecting dimensions of spindle noses and work holding chucks - Part 1: Conical connection
$68.00 ISO 702-2:2007 Machine tools - Connecting dimensions of spindle noses and work holding chucks - Part 2: Camlock type
$68.00 ISO 702-3:2007 Machine tools - Connecting dimensions of spindle noses and work holding chucks - Part 3: Bayonet type
$45.00 ISO 702-4:2004 Machine tools - Connecting dimensions of spindle noses and work holding chucks - Part 4: Cylindrical connection
$68.00 ISO 7388-1:2007 Tool shanks with 7/24 taper for automatic tool changers - Part 1: Dimensions and designation of shanks of forms A, AD, AF, U, UD and UF
$68.00 ISO 7388-2:2007 Tool shanks with 7/24 taper for automatic tool changers - Part 2: Dimensions and designation of shanks of forms J, JD and JF
$68.00 ISO 7388-3:2016 Tool shanks with 7/24 taper for automatic tool changers - Part 3: Retention knobs of forms AD, AF, UD, UF, JD and JF
$88.00 ISO 7388-3:2013 Tool shanks with 7/24 taper for automatic tool changers - Part 3: Retention knobs for shanks of forms AC, AD, AF, UC, UD, UF, JD and JF
$45.00 ISO 839-1:2006 Milling machine arbors with 7/24 tapers - Part 1: Dimensions and designation
$45.00 ISO 839-2:1977 Milling machine arbors with 7/24 tapers - Part 2: Accessories
$68.00 ISO 9270-1:2010 7/24 taper spindle noses for automatic tool changers - Part 1: Dimensions and designation of spindle noses of forms S and SF
$68.00 ISO 9270-2:2010 7/24 taper spindle noses for automatic tool changers - Part 2: Dimensions and designation of spindle noses of forms J and JF
$49.00 JIS B 0952:1999 Machine tool tables -- T-slots and corresponding bolts
$68.00 ISO 26622-1:2017 Modular taper interface with ball track system - Part 1: Dimensions and designation of shanks
$209.00 ISO 19719:2010 Machine tools - Work holding chucks - Vocabulary