ISO - ICS Category: 83 - Rubber and Plastic Industries

ICS Category: ISO Standards for - ICS Rubber (83.060)


Add to Cart Document Number Document Title
$68.00 ISO 10398:1998 Rubber - Identification of accelerators in cured and uncured compounds
$138.00 ISO 11345:2006 Rubber - Assessment of carbon black and carbon black/silica dispersion - Rapid comparative methods
$68.00 ISO 11346:2014 Rubber, vulcanized or thermoplastic - Estimation of life-time and maximum temperature of use
$88.00 ISO 11346:2004 Rubber, vulcanized or thermoplastic - Estimation of life-time and maximum temperature of use
$68.00 ISO/TR 12134:2010 Rubber - Estimation of uncertainty for test methods - Non-functional parameters
$68.00 ISO 12493:2011 Rubber, vulcanized - Determination of stress in tension upon heating
$68.00 ISO 12965:2000 Butadiene rubber -- Determination of microstructure by infra-red spectrometry
$103.00 ISO 13145:2012 Rubber - Determination of viscosity and stress relaxation using a rotorless sealed shear rheometer
$103.00 ISO 132:2011 Rubber, vulcanized or thermoplastic - Determination of flex cracking and crack growth (De Mattia)
$162.00 ISO 13226:2011 Rubber - Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers
$45.00 ISO 13507:2012 Rubber compounds, raw rubbers and compounding materials - Short terms for properties reported in certificates of analysis
$103.00 ISO 1407:2011 Rubber - Determination of solvent extract
$68.00 ISO 1408:1995 Rubber - Determination of carbon black content - Pyrolytic and chemical degradation methods
$103.00 ISO 14309:2011 Rubber, vulcanized or thermoplastic - Determination of volume and/or surface resistivity
$103.00 ISO 1431-1:2012 Rubber, vulcanized or thermoplastic - Resistance to ozone cracking - Part 1: Static and dynamic strain testing
$138.00 ISO 1431-3:2000 Rubber, vulcanized or thermoplastic -- Resistance to ozone cracking -- Part 3: Reference and alternative methods for determining the ozone concentration in laboratory test chambers
$68.00 ISO 1432:2013 Rubber, vulcanized or thermoplastic - Determination of low-temperature stiffening (Gehman test)
$45.00 ISO 1434:2016 Natural rubber in bales - Amount of bale coating - Determination
$51.00 ISO 1434:1995 Natural rubber in bales - Amount of bale coating - Determination
$68.00 ISO 14558:2016 Rubber - Determination of residual unsaturation of hydrogenated nitrile butadiene rubber (HNBR) by infrared spectroscopy
$88.00 ISO 14558:2000 Rubber -- Determination of residual unsaturation of hydrogenated nitrile rubber (HNBR) by infrared spectroscopy
$138.00 ISO 15113:2005 Rubber - Determination of frictional properties
$45.00 ISO 15671:2000 Rubber and rubber additives -- Determination of total sulfur content using an automatic analyser
$45.00 ISO 15672:2000 Rubber and rubber additives -- Determination of total nitrogen content using an automatic analyser
$103.00 ISO 16565:2013 Rubber - Determination of 5-ethylidenenorbornene (ENB) or dicyclopentadiene (DCPD) in ethylene-propylene-diene (EPDM) terpolymers
$103.00 ISO 1658:2015 Natural rubber (NR) - Evaluation procedure
$123.00 ISO 1658:2009 Natural rubber (NR) - Evaluation procedure
$103.00 ISO 17257:2013 Rubber - Identification of polymers - Pyrolytic gas-chromatographic method using mass-spectrometric detection
$45.00 ISO 17564:2008 Raw hydrogenated nitrile rubber (HNBR) - Determination of residual unsaturation by iodine value
$103.00 ISO/TS 17796:2013 Rubber - Trapping and identification of volatile components of rubber fumes with active sampling on a poly(2,6-diphenylphenylene oxide) type sorbent, using thermodesorption and gas chromatographic method with mass spectrometric detection
$138.00 ISO 1817:2015 Rubber, vulcanized or thermoplastic - Determination of the effect of liquids
$123.00 ISO 1817:2011 Rubber, vulcanized or thermoplastic - Determination of the effect of liquids
$68.00 ISO 1827:2016 Rubber, vulcanized or thermoplastic - Determination of shear modulus and adhesion to rigid plates - Quadruple-shear methods
$88.00 ISO 1827:2011 Rubber, vulcanized or thermoplastic - Determination of shear modulus and adhesion to rigid plates - Quadruple-shear methods
$45.00 ISO 18517:2015 Rubber, vulcanized or thermoplastic - Hardness testing - Introduction and guide
$51.00 ISO 18517:2005 Rubber, vulcanized or thermoplastic - Hardness testing - Introduction and guide
$68.00 ISO 1853:2011 Conducting and dissipative rubbers, vulcanized or thermoplastic - Measurement of resistivity
$45.00 ISO 18766:2014 Rubber, vulcanized or thermoplastic - Low temperature testing - General introduction and guide
$138.00 ISO 188:2011 Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests
$138.00 ISO 18898:2016 Rubber - Calibration and verification of hardness testers
$123.00 ISO 18898:2012 Rubber - Calibration and verification of hardness testers
$103.00 ISO 18899:2013 Rubber - Guide to the calibration of test equipment
$232.00 ISO 19003:2006 Rubber and rubber products - Guidance on the application of statistics to physical testing
$162.00 ISO 19004:2004 Rubber and rubber products - Determination of the sensitivity of test methods
$103.00 ISO 19242:2015 Rubber - Determination of total sulfur content by ion chromatography
$45.00 ISO 2007:2007 Rubber, unvulcanized - Determination of plasticity - Rapid-plastimeter method
$123.00 ISO 21561:2005 Styrene-butadiene rubber (SBR) - Determination of the microstructure of solution-polymerized SBR
$103.00 ISO 21561-1:2015 Styrene-butadiene rubber (SBR) - Determination of the microstructure of solution-polymerized SBR - Part 1: 1H-NMR and IR with cast-film method
$103.00 ISO 21561-2:2016 Styrene-butadiene rubber (SBR) - Determination of the microstructure of solution-polymerized SBR - Part 2: FTIR with ATR method
$22.00 ISO 21561/Amd1:2010 Styrene-butadiene rubber (SBR) - Determination of the microstructure of solution-polymerized SBR - Amendment 1
$68.00 ISO 2230:2002 Rubber products - Guidelines for storage
$103.00 ISO 2285:2013 Rubber, vulcanized or thermoplastic - Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load
$68.00 ISO 2302:2014 Isobutene-isoprene rubber (IIR) - Evaluation procedure
$88.00 ISO 2302:2005 Isobutene-isoprene rubber (IIR) - Evaluation procedures
$103.00 ISO 2303:2011 Isoprene rubber (IR) - Non-oil-extended, solution-polymerized types - Evaluation procedures
$103.00 ISO 2322:2014 Styrene-butadiene rubber (SBR) - Emulsion- and solution-polymerized types - Evaluation procedures
$68.00 ISO 23233:2016 Rubber, vulcanized or thermoplastic - Determination of resistance to abrasion using a driven, vertical abrasive disc
$88.00 ISO 23233:2009 Rubber, vulcanized or thermoplastic - Determination of resistance to abrasion using a driven, vertical abrasive disc
$68.00 ISO 23337:2016 Rubber, vulcanized or thermoplastic - Determination of abrasion resistance using the Improved Lambourn test machine
$88.00 ISO 23337:2007 Rubber, vulcanized or thermoplastic - Determination of abrasion resistance using the Improved Lambourn test machine
$103.00 ISO 23529:2016 Rubber - General procedures for preparing and conditioning test pieces for physical test methods
$123.00 ISO 23529:2010 Rubber - General procedures for preparing and conditioning test pieces for physical test methods
$103.00 ISO 23794:2015 Rubber, vulcanized or thermoplastic - Abrasion testing - Guidance
$123.00 ISO 23794:2010 Rubber, vulcanized or thermoplastic - Abrasion testing - Guidance
$138.00 ISO 2393:2014 Rubber test mixes - Preparation, mixing and vulcanization - Equipment and procedures
$68.00 ISO 24453:2008 Rubber - Acquisition and presentation of comparable single-point data
$68.00 ISO 24454:2008 Rubber - Acquisition and presentation of comparable multi-point data
$45.00 ISO 2454:1995 Rubber products - Determination of zinc content - EDTA titrimetric method
$45.00 ISO 247:2006 Rubber - Determination of ash
$68.00 ISO 2475:2011 Chloroprene rubber (CR) - General-purpose types - Evaluation procedure
$103.00 ISO 2476:2014 Butadiene rubber (BR) - Solution-polymerized types - Evaluation procedures
$68.00 ISO 27588:2012 Rubber, vulcanized or thermoplastic - Determination of dead-load hardness using the very low rubber hardness (VLRH) scale
$68.00 ISO 27727:2008 Rubber, vulcanized - Measurement of fatigue crack growth rate
$45.00 ISO 2781:2008 Rubber, vulcanized or thermoplastic - Determination of density
$19.00 ISO 2781/Amd1:2010 Rubber, vulcanized - Determination of density - Amendment 1: Precision data
$103.00 ISO 2782-1:2016 Rubber, vulcanized or thermoplastic - Determination of permeability to gases - Part 1: Differential-pressure methods
$123.00 ISO 2782-1:2012 Rubber, vulcanized or thermoplastic - Determination of permeability to gases - Part 1: Differential-pressure methods
$68.00 ISO 2782-2:2012 Rubber, vulcanized or thermoplastic - Determination of permeability to gases - Part 2: Equal-pressure method
$68.00 ISO 2878:2011 Rubber, vulcanized or thermoplastic - Antistatic and conductive products - Determination of electrical resistance
$103.00 ISO 289-1:2015 Rubber, unvulcanized - Determinations using a shearing-disc viscometer - Part 1: Determination of Mooney viscosity
$123.00 ISO 289-1:2014 Rubber, unvulcanized - Determinations using a shearing-disc viscometer - Part 1: Determination of Mooney viscosity
$68.00 ISO 289-2:2016 Rubber, unvulcanized - Determinations using a shearing-disc viscometer - Part 2: Determination of pre-vulcanization characteristics
$51.00 ISO 289-2:1994 Rubber, unvulcanized - Determinations using a shearing-disc viscometer - Part 2: Determination of pre-vulcanization characteristics
$45.00 ISO 289-3:2015 Rubber, unvulcanized - Determinations using a shearing-disc viscometer - Part 3: Determination of the Delta Mooney value for non-pigmented, oil-extended emulsion-polymerized SBR
$51.00 ISO 289-3:1999 Rubber, unvulcanized -- Determinations using a shearing-disc viscometer -- Part 3: Determination of the Delta Mooney value for non-pigmented, oil-extended emulsion-polymerized SBR
$68.00 ISO 289-4:2003 Rubber, unvulcanized - Determinations using a shearing-disc viscometer - Part 4: Determination of the Mooney stress-relaxation rate
$68.00 ISO 2921:2011 Rubber, vulcanized - Determination of low-temperature retraction (TR test)
$68.00 ISO 2951:2012 Rubber, vulcanized or thermoplastic - Determination of insulation resistance
$103.00 ISO 3384-1:2011 Rubber, vulcanized or thermoplastic - Determination of stress relaxation in compression - Part 1: Testing at constant temperature
$19.00 ISO 3384-1:2011/Amd1:2013 - Amendment 1: Revised calibration schedule
$68.00 ISO 3384-2:2012 Rubber, vulcanized or thermoplastic - Determination of stress relaxation in compression - Part 2: Testing with temperature cycling
$68.00 ISO 3387:2012 Rubber - Determination of crystallization effects by hardness measurements
$103.00 ISO 34-1:2015 Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 1: Trouser, angle and crescent test pieces
$123.00 ISO 34-1:2010 Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 1: Trouser, angle and crescent test pieces
$68.00 ISO 3417:2008 Rubber - Measurement of vulcanization characteristics with the oscillating disc curemeter
$68.00 ISO 34-2:2015 Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 2: Small (Delft) test pieces
$123.00 ISO 34-2:2011 Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 2: Small (Delft) test pieces
$162.00 ISO 37:2011 Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties
$68.00 ISO 3865:2005 Rubber, vulcanized or thermoplastic - Methods of test for staining in contact with organic material
$103.00 ISO 4097:2014 Rubber, ethylene-propylene-diene (EPDM) - Evaluation procedure
$99.00 ISO 4097:2007 Rubber, ethylene-propylene-diene (EPDM) - Evaluation procedure
$45.00 ISO 4645:1984 Rubber and rubber products - Guide to the identification of antidegradants - Thin layer chromatographic methods
$103.00 ISO 4647:2010 Rubber, vulcanized - Determination of static adhesion to textile cord - H-pull test
$138.00 ISO 4649:2010 Rubber, vulcanized or thermoplastic - Determination of abrasion resistance using a rotating cylindrical drum device
$232.00 ISO 4650:2012 Rubber - Identification - Infrared spectrometric methods
$68.00 ISO 4658:1999 Acrylonitrile-butadiene rubber (NBR) -- Evaluation procedure
$19.00 ISO 4658/Amd1:2004 Rubber, acrylonitrile-butadiene (NBR) - Test recipe and evaluation of vulcanization characteristics - Amendment 1
$68.00 ISO 4659:2014 Styrene-butadiene rubber (carbon black or carbon black and oil masterbatches) - Evaluation procedure
$77.00 ISO 4659:2003 Styrene-butadiene rubber (carbon black or carbon black and oil masterbatches) - Evaluation procedure
$45.00 ISO 4661-2:1987 Rubber, vulcanized - Preparation of samples and test pieces - Part 2 : Chemical tests
$162.00 ISO 4662:2009 Rubber, vulcanized or thermoplastic - Determination of rebound resilience
$138.00 ISO 4664-1:2011 Rubber, vulcanized or thermoplastic - Determination of dynamic properties - Part 1: General guidance
$68.00 ISO 4664-2:2006 Rubber, vulcanized or thermoplastic - Determination of dynamic properties - Part 2: Torsion pendulum methods at low frequencies
$68.00 ISO 4665:2016 Rubber, vulcanized or thermoplastic - Resistance to weathering
$88.00 ISO 4665:2006 Rubber, vulcanized or thermoplastic - Resistance to weathering
$68.00 ISO 4666-1:2010 Rubber, vulcanized - Determination of temperature rise and resistance to fatigue in flexometer testing - Part 1: Basic principles
$68.00 ISO 4666-2:2008 Rubber, vulcanized - Determination of temperature rise and resistance to fatigue in flexometer testing - Part 2: Rotary flexometer
$103.00 ISO 4666-3:2016 Rubber, vulcanized - Determination of temperature rise and resistance to fatigue in flexometer testing - Part 3: Compression flexometer (constant-strain type)
$123.00 ISO 4666-3:2010 Rubber, vulcanized - Determination of temperature rise and resistance to fatigue in flexometer testing - Part 3: Compression flexometer (constant-strain type)
$138.00 ISO 4666-4:2007 Rubber, vulcanized - Determination of temperature rise and resistance to fatigue in flexometer testing - Part 4: Constant-stress flexometer
$138.00 ISO 48:2010 Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD)
$51.00 ISO 5478:2006 Rubber - Determination of styrene content - Nitration method
$68.00 ISO 5600:2011 Rubber - Determination of adhesion to rigid materials using conical shaped parts
$103.00 ISO 5603:2011 Rubber, vulcanized - Determination of adhesion to wire cord
$45.00 ISO 6101-1:1991 Rubber - Determination of metal content by atomic absorption spectrometry - Part 1: Determination of zinc content
$68.00 ISO 6101-2:1997 Rubber - Determination of metal content by atomic absorption spectrometry - Part 2: Determination of lead content
$68.00 ISO 6101-3:2014 Rubber - Determination of metal content by atomic absorption spectrometry - Part 3: Determination of copper content
$88.00 ISO 6101-3:1997 Rubber - Determination of metal content by atomic absorption spectrometry - Part 3: Determination of copper content
$68.00 ISO 6101-4:2014 Rubber - Determination of metal content by atomic absorption spectrometry - Part 4: Determination of manganese content
$88.00 ISO 6101-4:1997 Rubber - Determination of metal content by atomic absorption spectrometry - Part 4: Determination of manganese content
$45.00 ISO 6101-5:2006 Rubber - Determination of metal content by atomic absorption spectrometry - Part 5: Determination of iron content
$68.00 ISO 6101-6:2011 Rubber - Determination of metal content by atomic absorption spectrometry - Part 6: Determination of magnesium content
$45.00 ISO 6133:2015 Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
$51.00 ISO 6133:1998 Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
$138.00 ISO 6502:2016 Rubber - Guide to the use of curemeters
$149.00 ISO 6502:1999 Rubber -- Guide to the use of curemeters
$68.00 ISO 6505:2015 Rubber, vulcanized or thermoplastic - Determination of tendency to adhere to and corrode metals
$123.00 ISO 6505:2005 Rubber, vulcanized or thermoplastic - Determination of tendency to adhere to and corrode metals
$68.00 ISO 6528-1:1992 Rubber - Determination of total sulfur content - Part 1: Oxygen combustion flask method
$88.00 ISO 6528-3:1988 Rubber - Determination of total sulfur content - Part 3 : Furnace combustion method
$68.00 ISO 6914:2013 Rubber, vulcanized or thermoplastic - Determination of ageing characteristics by measurement of stress relaxation in tension
$103.00 ISO 6943:2011 Rubber, vulcanized - Determination of tension fatigue
$68.00 ISO 7269:1995 Rubber - Determination of free sulfur
$209.00 ISO 7270-1:2003 Rubber - Analysis by pyrolytic gas-chromatographic methods - Part 1: Identification of polymers (single polymers and polymer blends)
$19.00 ISO 7270-1/Amd1:2010 Amendment 1 to ISO 7270-1
$68.00 ISO 7270-2:2012 Rubber - Analysis by pyrolytic gas-chromatographic methods - Part 2: Determination of styrene/butadiene/isoprene ratio
$68.00 ISO 7619-1:2010 Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1: Durometer method (Shore hardness)
$45.00 ISO 7619-2:2010 Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 2: IRHD pocket meter method
$162.00 ISO/TR 7620:2005 Rubber materials - Chemical resistance
$68.00 ISO 7663:2014 Halogenated isobutene-isoprene rubber (BIIR and CIIR) - Evaluation procedures
$88.00 ISO 7663:2005 Halogenated isobutene-isoprene rubber (BIIR and CIIR) - Evaluation procedures
$68.00 ISO 7725:1991 Rubber and rubber products - Determination of bromine and chlorine content - Oxygen flask combustion technique
$138.00 ISO 7743:2011 Rubber, vulcanized or thermoplastic - Determination of compression stress-strain properties
$68.00 ISO 7780:1998 Rubbers and rubber latices - Determination of manganese content - Sodium periodate photometric methods
$103.00 ISO 8013:2012 Rubber, vulcanized - Determination of creep in compression or shear
$45.00 ISO 8053:1995 Rubber and latex - Determination of copper content - Photometric method
$103.00 ISO 812:2011 Rubber, vulcanized or thermoplastic - Determination of low-temperature brittleness
$68.00 ISO 813:2016 Rubber, vulcanized or thermoplastic - Determination of adhesion to a rigid substrate - 90 degree peel method
$88.00 ISO 813:2010 Rubber, vulcanized or thermoplastic - Determination of adhesion to a rigid substrate - 90 degree peel method
$68.00 ISO 814:2011 Rubber, vulcanized or thermoplastic - Determination of adhesion to metal - Two-plate method
$103.00 ISO 815-1:2014 Rubber, vulcanized or thermoplastic - Determination of compression set - Part 1: At ambient or elevated temperatures
$88.00 ISO 815-1:2008 Rubber, vulcanized or thermoplastic - Determination of compression set - Part 1: At ambient or elevated temperatures
$103.00 ISO 815-2:2014 Rubber, vulcanized or thermoplastic - Determination of compression set - Part 2: At low temperatures
$77.00 ISO 815-2:2008 Rubber, vulcanized or thermoplastic - Determination of compression set - Part 2: At low temperatures
$45.00 ISO 9028:2006 Rubber - Dissolution by acid digestion
$209.00 ISO/TR 9272:2005 Rubber and rubber products - Determination of precision for test method standards
$68.00 ISO 9924-1:2016 Rubber and rubber products - Determination of the composition of vulcanizates and uncured compounds by thermogravimetry - Part 1: Butadiene, ethylene-propylene copolymer and terpolymer, isobutene-isoprene, isoprene and styrene-butadiene rubbers
$88.00 ISO 9924-1:2000 Rubber and rubber products -- Determination of the composition of vulcanizates and uncured compounds by thermogravimetry -- Part 1: Butadiene, ethylene-propylene copolymer and terpolymer, isobutene-isoprene, isoprene and styrene-butadiene rubbers
$68.00 ISO 9924-2:2016 Rubber and rubber products - Determination of the composition of vulcanizates and uncured compounds by thermogravimetry - Part 2: Acrylonitrile-butadiene and halobutyl rubbers
$88.00 ISO 9924-2:2000 Rubber and rubber products -- Determination of the composition of vulcanizates and uncured compounds by thermogravimetry -- Part 2: Acrylonitrile-butadiene and halobutyl rubbers
$22.00 ISO 9924-2/Amd1:2012 Rubber and rubber products - Determination of the composition of vulcanizates and uncured compounds by thermogravimetry - Part 2: Acrylonitrile-butadiene and halobutyl rubbers - Amendment 1
$103.00 ISO 9924-3:2009 Rubber and rubber products - Determination of the composition of vulcanizates and uncured compounds by thermogravimetry - Part 3: Hydrocarbon rubbers, halogenated rubbers and polysiloxane rubbers after extraction
$97.00 JIS K 6251:2010 Rubber, vulcanized or thermoplastics -- Determination of tensile stress-strain properties
$39.00 JIS K 6253-4:2012 Rubber, vulcanized or thermoplastic -- Determination of hardness -- Part 4: IRHD pocket meter method
$78.00 JIS K 6254:2010 Rubber, vulcanized or thermoplastic -- Determination of stress-strain properties
$107.00 JIS K 6257:2010 Rubber, vulcanized or thermoplastic -- Determination of heat ageing properties
$68.00 ISO 12493:2017 Rubber, vulcanized - Determination of stress in tension upon heating
$103.00 ISO 132:2017 Rubber, vulcanized or thermoplastic - Determination of flex cracking and crack growth (De Mattia)
$138.00 ISO 1431-3:2017 Rubber, vulcanized or thermoplastic - Resistance to ozone cracking - Part 3: Reference and alternative methods for determining the ozone concentration in laboratory test chambers
$138.00 ISO 19983:2017 Rubber - Determination of precision of test methods
$103.00 ISO 19984-1:2017 Rubber and rubber products - Determination of biobased content - Part 1: General principles and calculation methods using the formulation of the rubber compound
$138.00 ISO 19984-2:2017 Rubber and rubber products - Determination of biobased content - Part 2: Biobased carbon content
$138.00 ISO 19984-3:2017 Rubber and rubber products - Determination of biobased content - Part 3: Biobased mass content
$19.00 ISO 23233:2016/Amd1:2017 - Amendment 1
$68.00 ISO 2878:2017 Rubber, vulcanized or thermoplastic - Antistatic and conductive products - Determination of electrical resistance
$162.00 ISO 4662:2017 Rubber, vulcanized or thermoplastic - Determination of rebound resilience
$68.00 ISO 5600:2017 Rubber - Determination of adhesion to rigid materials using conical shaped parts
$103.00 ISO 5603:2017 Rubber, vulcanized - Determination of adhesion to wire cord
$103.00 ISO 6943:2017 Rubber, vulcanized - Determination of tension fatigue
$103.00 ISO 812:2017 Rubber, vulcanized or thermoplastic - Determination of low-temperature brittleness
$68.00 ISO 814:2017 Rubber, vulcanized or thermoplastic - Determination of adhesion to metal - Two-plate method
$138.00 ISO 4649:2017 Rubber, vulcanized or thermoplastic - Determination of abrasion resistance using a rotating cylindrical drum device
$103.00 ISO/TS 289-4:2017 Rubber, unvulcanized - Determinations using a shearing-disc viscometer - Part 4: Determination of the Mooney stress-relaxation rate
$138.00 ISO 7743:2017 Rubber, vulcanized or thermoplastic - Determination of compression stress-strain properties
$162.00 ISO 37:2017 Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties
$45.00 ISO 1382:2012 Rubber - Vocabulary
$68.00 ISO 19051:2015 Rubber, raw natural, and rubber latex, natural - Determination of nitrogen content by Micro Dumas combustion method
$45.00 ISO 22768:2006 Rubber, raw - Determination of the glass transition temperature by differential scanning calorimetry (DSC)
$68.00 ISO 36:2011 Rubber, vulcanized or thermoplastic - Determination of adhesion to textile fabrics
$45.00 ISO 7323:2006 Rubber, raw and unvulcanized compounded - Determination of plasticity number and recovery number - Parallel-plate method
$68.00 ISO 9026:2007 Raw rubber or unvulcanized compounds - Determination of green strength
$68.00 ISO 22768:2017 Rubber, raw - Determination of the glass transition temperature by differential scanning calorimetry (DSC)
$68.00 ISO 36:2017 Rubber, vulcanized or thermoplastic - Determination of adhesion to textile fabrics
$138.00 ISO/TS 21396:2017 Rubber - Determination of mass concentration of tire and road wear particles (TRWP) in soil and sediments - Pyrolysis-GC/MS method
$45.00 ISO 1629:2013 Rubber and latices - Nomenclature