ISO - ICS Category: 83 - Rubber and Plastic Industries

ICS Category: ISO Standards for - ICS Plastics-General (83.080.01)


Add to Cart Document Number Document Title
$138.00 ISO 10093:1998 Plastics - Fire tests - Standard ignition sources
$138.00 ISO 10210:2012 Plastics - Methods for the preparation of samples for biodegradation testing of plastic materials
$103.00 ISO 1043-1:2011 Plastics - Symbols and abbreviated terms - Part 1: Basic polymers and their special characteristics
$19.00 ISO 1043-1:2011/Amd1:2016 - Amendment 1: New symbol ST for syndiotactic
$45.00 ISO 1043-4:1998 Plastics - Symbols and abbreviated terms - Part 4: Flame retardants
$162.00 ISO 10640:2011 Plastics - Methodology for assessing polymer photoageing by FTIR and UV/visible spectroscopy
$103.00 ISO 10927:2011 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
$162.00 ISO 11357-1:2016 Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles
$173.00 ISO 11357-1:2009 Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles
$45.00 ISO 11357-2:2013 Plastics - Differential scanning calorimetry (DSC) - Part 2: Determination of glass transition temperature and glass transition step height
$45.00 ISO 11357-3:2011 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization
$68.00 ISO 11357-4:2014 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity
$88.00 ISO 11357-4:2005 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity
$68.00 ISO 11357-5:2013 Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
$68.00 ISO 11357-6:2008 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
$68.00 ISO 11357-7:2015 Plastics - Differential scanning calorimetry (DSC) - Part 7: Determination of crystallization kinetics
$88.00 ISO 11357-7:2002 Plastics - Differential scanning calorimetry (DSC) - Part 7: Determination of crystallization kinetics
$88.00 ISO 11358:1997 Plastics - Thermogravimetry (TG) of polymers - General principles
$68.00 ISO 11358-1:2014 Plastics - Thermogravimetry (TG) of polymers - Part 1: General principles
$45.00 ISO 11358-2:2014 Plastics - Thermogravimetry (TG) of polymers - Part 2: Determination of activation energy
$66.00 ISO 11358-2:2005 Plastics - Thermogravimetry (TG) of polymers - Part 2: Determination of activation energy
$103.00 ISO 11358-3:2013 Plastics - Thermogravimetry (TG) of polymers - Part 3: Determination of the activation energy using the Ozawa-Friedman plot and analysis of the reaction kinetics
$45.00 ISO 11359-1:2014 Plastics - Thermomechanical analysis (TMA) - Part 1: General principles
$68.00 ISO 11359-2:1999 Plastics -- Thermomechanical analysis (TMA) -- Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature
$45.00 ISO 11359-3:2002 Plastics - Thermomechanical analysis (TMA) - Part 3: Determination of penetration temperature
$68.00 ISO 11403-1:2014 Plastics - Acquisition and presentation of comparable multipoint data - Part 1: Mechanical properties
$108.00 ISO 11403-1:2001 Plastics - Acquisition and presentation of comparable multipoint data - Part 1: Mechanical properties
$68.00 ISO 11403-2:2012 Plastics - Acquisition and presentation of comparable multipoint data - Part 2: Thermal and processing properties
$103.00 ISO 11403-3:2014 Plastics - Acquisition and presentation of comparable multipoint data - Part 3: Environmental influences on properties
$108.00 ISO 11403-3:1999 Plastics -- Acquisition and presentation of comparable multipoint data -- Part 3: Environmental influences on properties
$185.00 ISO 11443:2014 Plastics - Determination of the fluidity of plastics using capillary and slit-die rheometers
$45.00 ISO 11469:2016 Plastics - Generic identification and marking of plastics products
$51.00 ISO 11469:2000 Plastics -- Generic identification and marking of plastics products
$45.00 ISO 1147:1995 Plastics/rubber - Polymer dispersions and synthetic rubber latices - Freeze-thaw cycle stability test
$68.00 ISO 1183-1:2012 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method
$68.00 ISO 1183-2:2004 Plastics - Methods for determining the density of non-cellular plastics - Part 2: Density gradient column method
$68.00 ISO 1183-3:1999 Plastics -- Methods for determining the density of non-cellular plastics -- Part 3: Gas pyknometer method
$45.00 ISO 11907-1:1998 Plastics - Smoke generation - Determination of the corrosivity of fire effluents - Part 1: Guidance
$68.00 ISO 11907-2:1995 Plastics - Smoke generation - Determination of the corrosivity of fire effluents - Part 2: Static method
$138.00 ISO 11907-3:1998 Plastics - Smoke generation - Determination of the corrosivity of fire effluents - Part 3: Dynamic decomposition method using a travelling furnace
$138.00 ISO 11907-4:1998 Plastics - Smoke generation - Determination of the corrosivity of fire effluents - Part 4: Dynamic decomposition method using a conical radiant heater
$45.00 ISO 12058-1:1997 Plastics - Determination of viscosity using a falling-ball viscometer - Part 1: Inclined-tube method
$68.00 ISO 12992:1995 Plastics - Vertical flame spread determination for film and sheet
$68.00 ISO 13468-1:1996 Plastics - Determination of the total luminous transmittance of transparent materials - Part 1: Single-beam instrument
$45.00 ISO 13468-2:1999 Plastics -- Determination of the total luminous transmittance of transparent materials -- Part 2: Double-beam instrument
$103.00 ISO 13586:2000 Plastics - Determination of fracture toughness (GIC and KIC) - Linear elastic fracture mechanics (LEFM) approach
$19.00 ISO 13586/Amd1:2003 Plastics - Determination of fracture toughness (GIC and KIC) - Linear elastic fracture mechanics (LEFM) approach - Amendment 1: Guidelines for the testing of injection-moulded plastics containing discontinuous reinforcing fibres
$138.00 ISO 13927:2015 Plastics - Simple heat release test using a conical radiant heater and a thermopile detector
$123.00 ISO 13927:2001 Plastics -- Simple heat release test using a conical radiant heater and a thermopile detector
$103.00 ISO 13975:2012 Plastics - Determination of the ultimate anaerobic biodegradation of plastic materials in controlled slurry digestion systems - Method by measurement of biogas production
$45.00 ISO 14782:1999 Plastics - Determination of haze for transparent materials
$138.00 ISO 14851:1999 Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium -- Method by measuring the oxygen demand in a closed respirometer
$103.00 ISO 14852:1999 Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium -- Method by analysis of evolved carbon dioxide
$162.00 ISO 14853:2016 Plastics - Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system - Method by measurement of biogas production
$173.00 ISO 14853:2005 Plastics - Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system - Method by measurement of biogas production
$138.00 ISO 14855-1:2012 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide - Part 1: General method
$103.00 ISO 14855-2:2007 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide - Part 2: Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test
$68.00 ISO 15033:2007 Plastics - Determination of caprolactam and its cyclic and linear oligomers by HPLC
$68.00 ISO 15314:2004 Plastics - Methods for marine exposure
$138.00 ISO 15512:2016 Plastics - Determination of water content
$149.00 ISO 15512:2014 Plastics - Determination of water content
$114.00 ISO 15512:2008 Plastics - Determination of water content
$138.00 ISO 15850:2014 Plastics - Determination of tension-tension fatigue crack propagation - Linear elastic fracture mechanics (LEFM) approach
$68.00 ISO 15985:2014 Plastics - Determination of the ultimate anaerobic biodegradation under high-solids anaerobic-digestion conditions - Method by analysis of released biogas
$68.00 ISO 16012:2015 Plastics - Determination of linear dimensions of test specimens
$88.00 ISO 16012:2004 Plastics - Determination of linear dimensions of test specimens
$103.00 ISO 16014-1:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 1: General principles
$68.00 ISO 16014-2:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 2: Universal calibration method
$103.00 ISO 16014-3:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 3: Low-temperature method
$103.00 ISO 16014-4:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 4: High-temperature method
$138.00 ISO 16014-5:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 5: Method using light-scattering detection
$68.00 ISO 16152:2005 Plastics - Determination of xylene-soluble matter in polypropylene
$103.00 ISO 1628-1:2009 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles
$19.00 ISO 1628-1/Amd1:2012 Guidelines for the standardization of methods for the determination of viscosity number and limiting viscosity number of polymers in dilute solution - Part 1: General conditions - Amendment 1
$68.00 ISO 16620-1:2015 Plastics - Biobased content - Part 1: General principles
$138.00 ISO 16620-2:2015 Plastics - Biobased content - Part 2: Determination of biobased carbon content
$68.00 ISO 16620-3:2015 Plastics - Biobased content - Part 3: Determination of biobased synthetic polymer content
$103.00 ISO 16620-4:2016 Plastics - Biobased content - Part 4: Determination of biobased mass content
$68.00 ISO 16620-5:2017 Plastics - Biobased content - Part 5: Declaration of biobased carbon content, biobased synthetic polymer content and biobased mass content
$45.00 ISO 1675:1985 Plastics - Liquid resins - Determination of density by the pyknometer method
$68.00 ISO 16869:2008 Plastics - Assessment of the effectiveness of fungistatic compounds in plastics formulations
$68.00 ISO 16929:2013 Plastics - Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test
$68.00 ISO 17088:2012 Specifications for compostable plastics
$45.00 ISO 171:1980 Plastics - Determination of bulk factor of moulding materials
$68.00 ISO 17221:2014 Plastics - Determination of image clarity (degree of sharpness of reflected or transmitted image)
$68.00 ISO 17223:2014 Plastics - Determination of yellowness index and change in yellowness index
$138.00 ISO 17281:2002 Plastics - Determination of fracture toughness (GIC and KIC) at moderately high loading rates (1 m/s)
$209.00 ISO 17282:2004 Plastics - Guide to the acquisition and presentation of design data
$68.00 ISO 17422:2002 Plastics -- Environmental aspects -- General guidelines for their inclusion in standards (available in English only)
$138.00 ISO 175:2010 Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals
$103.00 ISO 17541:2014 Plastics - Quantitative evaluation of scratch-induced damage and scratch visibility
$138.00 ISO 17556:2012 Plastics - Determination of the ultimate aerobic biodegradability of plastic materials in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved
$45.00 ISO 176:2005 Plastics - Determination of loss of plasticizers - Activated carbon method
$45.00 ISO 177:2016 Plastics - Determination of migration of plasticizers
$51.00 ISO 177:1988 Plastics - Determination of migration of plasticizers
$103.00 ISO 17744:2004 Plastics - Determination of specific volume as a function of temperature and pressure (pvT diagram) - Piston apparatus method
$138.00 ISO 178:2010 Plastics - Determination of flexural properties
$103.00 ISO/TR 17801:2014 Plastics - Standard table for reference global solar spectral irradiance at sea level - Horizontal, relative air mass 1
$19.00 ISO 178:2010/Amd1:2013 - Amendment 1
$138.00 ISO 179-1:2010 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test
$103.00 ISO 179-2:1997 Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test
$19.00 ISO 179-2/Amd1:2011 Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test - Amendment 1: Precision data
$68.00 ISO 180:2000 Plastics -- Determination of Izod impact strength
$19.00 ISO 180/Amd1:2006 Plastics - Determination of Izod impact strength of rigid materials - Amendment 1
$19.00 ISO 180:2000/Amd2:2013 - Amendment 2: Precision data
$68.00 ISO/TR 18486:2016 Plastics - Parameters comparing the spectral irradiance of a laboratory light source for weathering applications to a reference solar spectral irradiance
$68.00 ISO 18830:2016 Plastics - Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sandy sediment interface - Method by measuring the oxygen demand in closed respirometer
$68.00 ISO/TS 19022:2016 Plastics - Method of controlled acceleration of laboratory weathering by increased irradiance
$103.00 ISO/TR 19032:2006 Plastics - Use of polyethylene reference specimens (PERS) for monitoring laboratory and outdoor weathering conditions
$103.00 ISO 19252:2008 Plastics - Determination of scratch properties
$68.00 ISO 19679:2016 Plastics - Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface - Method by analysis of evolved carbon dioxide
$68.00 ISO 20200:2015 Plastics - Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test
$88.00 ISO 20200:2004 Plastics - Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test
$45.00 ISO 2039-1:2001 Plastics - Determination of hardness - Part 1: Ball indentation method
$45.00 ISO 2039-2:1987 Plastics - Determination of hardness - Part 2 : Rockwell hardness
$103.00 ISO 20753:2008 Plastics - Test specimens
$103.00 ISO 20965:2005 Plastics - Determination of the transient extensional viscosity of polymer melts
$45.00 ISO 2115:1996 Plastics - Polymer dispersions - Determination of white point temperature and minimum film-forming temperature
$68.00 ISO 21509:2006 Plastics and ebonite - Verification of Shore durometers
$103.00 ISO 22007-1:2009 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles
$138.00 ISO 22007-2:2015 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 2: Transient plane heat source (hot disc) method
$123.00 ISO 22007-2:2008 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 2: Transient plane heat source (hot disc) method
$103.00 ISO 22007-3:2008 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 3: Temperature wave analysis method
$68.00 ISO 22007-4:2008 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Laser flash method
$162.00 ISO/TR 22007-5:2011 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 5: Results of interlaboratory testing of poly(methyl methacrylate) samples
$68.00 ISO 22007-6:2014 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 6: Comparative method for low thermal conductivities using a temperature-modulation technique
$45.00 ISO 22088-1:2006 Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 1: General guidance
$68.00 ISO 22088-2:2006 Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 2: Constant tensile load method
$68.00 ISO 22088-3:2006 Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 3: Bent strip method
$103.00 ISO 22088-4:2006 Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 4: Ball or pin impression method
$68.00 ISO 22088-5:2006 Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 5: Constant tensile deformation method
$68.00 ISO 22088-6:2006 Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 6: Slow strain rate method
$103.00 ISO 22196:2011 Measurement of antibacterial activity on plastics and other non-porous surfaces
$103.00 ISO 25337:2010 Plastics - Production quality control - Statistical method for using single measurements
$68.00 ISO 2555:1989 Plastics - Resins in the liquid state or as emulsions or dispersions - Determination of apparent viscosity by the Brookfield Test method
$103.00 ISO 2578:1993 Plastics - Determination of time-temperature limits after prolonged exposure to heat
$68.00 ISO 2818:1994 Plastics - Preparation of test specimens by machining
$68.00 ISO 291:2008 Plastics - Standard atmospheres for conditioning and testing
$138.00 ISO 29221:2014 Plastics - Determination of mode I plane-strain crack-arrest toughness
$103.00 ISO 29664:2010 Plastics - Artificial weathering including acidic deposition
$68.00 ISO 3146:2000 Plastics -- Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods
$68.00 ISO 3167:2014 Plastics - Multipurpose test specimens
$88.00 ISO 3167:2002 Plastics - Multipurpose test specimens
$68.00 ISO 3219:1993 Plastics - Polymers/resins in the liquid state or as emulsions or dispersions - Determination of viscosity using a rotational viscometer with defined shear rate
$68.00 ISO 3251:2008 Paints, varnishes and plastics - Determination of non-volatile-matter content
$45.00 ISO 3451-1:2008 Plastics - Determination of ash - Part 1: General methods
$45.00 ISO 3915:1981 Plastics - Measurement of resistivity of conductive plastics
$45.00 ISO 4576:1996 Plastics - Polymer dispersions - Determination of sieve residue (gross particle and coagulum content)
$45.00 ISO 458-1:1985 Plastics - Determination of stiffness in torsion of flexible materials - Part 1 : General method
$103.00 ISO 4582:2007 Plastics - Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or laboratory light sources
$45.00 ISO 4589-1:1996 Plastics - Determination of burning behaviour by oxygen index - Part 1: Guidance
$138.00 ISO 4589-2:1996 Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test
$103.00 ISO 4589-3:1996 Plastics - Determination of burning behaviour by oxygen index - Part 3: Elevated-temperature test
$68.00 ISO 4611:2010 Plastics - Determination of the effects of exposure to damp heat, water spray and salt mist
$68.00 ISO 489:1999 Plastics -- Determination of refractive index
$138.00 ISO 4892-1:2016 Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance
$123.00 ISO 4892-1:1999 Plastics -- Methods of exposure to laboratory light sources -- Part 1: General guidance
$103.00 ISO 4892-2:2013 Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps
$103.00 ISO 4892-3:2016 Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps
$123.00 ISO 4892-3:2013 Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps
$68.00 ISO 4892-4:2013 Plastics - Methods of exposure to laboratory light sources - Part 4: Open-flame carbon-arc lamps
$138.00 ISO 527-1:2012 Plastics - Determination of tensile properties - Part 1: General principles
$68.00 ISO 527-2:2012 Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics
$103.00 ISO 604:2002 Plastics - Determination of compressive properties
$103.00 ISO 62:2008 Plastics - Determination of water absorption
$103.00 ISO 6427:2013 Plastics - Determination of matter extractable by organic solvents (conventional methods)
$68.00 ISO 6601:2002 Plastics - Friction and wear by sliding - Identification of test parameters
$138.00 ISO 6603-1:2000 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 1: Non-instrumented impact testing
$138.00 ISO 6603-2:2000 Plastics -- Determination of puncture impact behaviour of rigid plastics -- Part 2: Instrumented impact testing
$138.00 ISO 6721-1:2011 Plastics - Determination of dynamic mechanical properties - Part 1: General principles
$138.00 ISO 6721-10:2015 Plastics - Determination of dynamic mechanical properties - Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer
$123.00 ISO 6721-10:1999 Plastics -- Determination of dynamic mechanical properties -- Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer
$68.00 ISO 6721-11:2012 Plastics - Determination of dynamic mechanical properties - Part 11: Glass transition temperature
$68.00 ISO 6721-12:2009 Plastics - Determination of dynamic mechanical properties - Part 12: Compressive vibration - Non-resonance method
$103.00 ISO 6721-2:2008 Plastics - Determination of dynamic mechanical properties - Part 2: Torsion-pendulum method
$68.00 ISO 6721-3:1994 Plastics - Determination of dynamic mechanical properties - Part 3: Flexural vibration - Resonance-curve method
$68.00 ISO 6721-4:2008 Plastics - Determination of dynamic mechanical properties - Part 4: Tensile vibration - Non-resonance method
$68.00 ISO 6721-5:1996 Plastics - Determination of dynamic mechanical properties - Part 5: Flexural vibration - Non-resonance method
$19.00 ISO 6721-5/Amd1:2007 Plastics - Determination of dynamic mechanical properties - Part 5: Flexural vibration - Non-resonance method - Amendment 1
$68.00 ISO 6721-6:1996 Plastics - Determination of dynamic mechanical properties - Part 6: Shear vibration - Non-resonance method
$19.00 ISO 6721-6/Amd1:2007 Plastics - Determination of dynamic mechanical properties - Part 6: Shear vibration - Non-resonance method - Amendment 1
$68.00 ISO 6721-7:1996 Plastics - Determination of dynamic mechanical properties - Part 7: Torsional vibration - Non-resonance method
$19.00 ISO 6721-7/Amd1:2007 Plastics - Determination of dynamic mechanical properties - Part 7: Torsional vibration - Non-resonance method - Amendment 1
$103.00 ISO 6721-8:1997 Plastics - Determination of dynamic mechanical properties - Part 8: Longitudinal and shear vibration - Wave-propagation method
$68.00 ISO 6721-9:1997 Plastics - Determination of dynamic mechanical properties - Part 9: Tensile vibration - Sonic-pulse propagation method
$19.00 ISO 6721-9/Amd1:2007 Plastics - Determination of dynamic mechanical properties - Part 9: Tensile vibration - Sonic-pulse propagation method - Amendment 1: Precision
$68.00 ISO 75-1:2013 Plastics - Determination of temperature of deflection under load - Part 1: General test method
$103.00 ISO 8256:2004 Plastics - Determination of tensile-impact strength
$45.00 ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)
$103.00 ISO 877-1:2009 Plastics - Methods of exposure to solar radiation - Part 1: General guidance
$45.00 ISO 877-2:2009 Plastics - Methods of exposure to solar radiation - Part 2: Direct weathering and exposure behind window glass
$68.00 ISO 877-3:2009 Plastics - Methods of exposure to solar radiation - Part 3: Intensified weathering using concentrated solar radiation
$103.00 ISO 899-1:2003 Plastics - Determination of creep behaviour - Part 1: Tensile creep
$19.00 ISO 899-1:2003/Amd1:2015 - Amendment 1
$103.00 ISO 899-2:2003 Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading
$19.00 ISO 899-2:2003/Amd1:2015 - Amendment 1
$68.00 ISO 9352:2012 Plastics - Determination of resistance to wear by abrasive wheels
$103.00 ISO 9370:2009 Plastics - Instrumental determination of radiant exposure in weathering tests - General guidance and basic test method
$68.00 ISO 974:2000 Plastics - Determination of the brittleness temperature by impact
$68.00 ISO 9773:1998 Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source
$49.00 JIS K 6828-1:2003 Plastics -- Polymer dispersions -- Determination of non-volatile matter (residue) at specified temperatures
$29.00 JIS K 6828-2:2003 Plastics -- Polymer dispersions -- Determination of white point temperature and minimum film-forming temperature
$39.00 JIS K 6828-3:2003 Plastics -- Polymer dispersions -- Determination of sieve residue (gross particle and coagulum content)
$10.00 JIS K 7122:1987/AMENDMENT 1:2012 Testing methods for heat of transitions of plastics (Amendment 1)
$103.00 ISO 19929:2017 Plastics - Determination of average molecular mass and mixture ratio of poly(ethylene glycol) and its derivatives by MALDI-TOF-MS
$103.00 ISO 22007-4:2017 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Laser flash method
$103.00 ISO 4582:2017 Plastics - Determination of changes in colour and variations in properties after exposure to glass-filtered solar radiation, natural weathering or laboratory radiation sources
$138.00 ISO 9370:2017 Plastics - Instrumental determination of radiant exposure in weathering tests - General guidance and basic test method
$103.00 ISO 899-1:2017 Plastics - Determination of creep behaviour - Part 1: Tensile creep
$138.00 ISO 22007-1:2017 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles
$45.00 ISO 1043-2:2011 Plastics - Symbols and abbreviated terms - Part 2: Fillers and reinforcing materials
$68.00 ISO 1043-3:2016 Plastics - Symbols and abbreviated terms - Part 3: Plasticizers
$51.00 ISO 1043-3:1996 Plastics - Symbols and abbreviated terms - Part 3: Plasticizers
$19.00 ISO 1043-4:1998/Amd1:2016 - Amendment 1: Code numbers
$162.00 ISO 10840:2008 Plastics - Guidance for the use of standard fire tests
$68.00 ISO 13741-1:1998 Plastics/rubber - Polymer dispersions and rubber latices (natural and synthetic) - Determination of residual monomers and other organic components by capillary-column gas chromatography - Part 1: Direct liquid injection method
$68.00 ISO 13741-2:1998 Plastics/rubber - Polymer dispersions and rubber latices (natural and synthetic) - Determination of residual monomers and other organic components by capillary-column gas chromatography - Part 2: Headspace method
$68.00 ISO 1409:2006 Plastics/rubber - Polymer dispersions and rubber latices (natural and synthetic) - Determination of surface tension by the ring method
$103.00 ISO 15270:2008 Plastics - Guidelines for the recovery and recycling of plastics waste
$138.00 ISO 15791-1:2014 Plastics - Development and use of intermediate-scale fire tests for plastics products - Part 1: General guidance
$162.00 ISO 21367:2007 Plastics - Reaction to fire - Test method for flame spread and combustion product release from vertically oriented specimens
$162.00 ISO 25762:2009 Plastics - Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites
$68.00 ISO 30021:2013 Plastics - Burning behaviour - Intermediate-scale fire-resistance testing of fibre-reinforced polymer composites
$19.00 ISO 4589-2/Amd1:2005 Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test - Amendment 1
$45.00 ISO 472:2013 Plastics - Vocabulary
$185.00 ISO 5659-2:2012 Plastics - Smoke generation - Part 2: Determination of optical density by a single-chamber test
$45.00 ISO 6133:2015 Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
$51.00 ISO 6133:1998 Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
$138.00 ISO 846:1997 Plastics - Evaluation of the action of microorganisms
$45.00 ISO 8660:2002 Plastics - Determination of permanganate absorption number of caprolactam - Spectrometric method
$68.00 ISO 871:2006 Plastics - Determination of ignition temperature using a hot-air furnace
$19.00 ISO 9773/Amd1:2003 Plastics - Determination of burning behaviour of flexible vertical specimens in contact with a small-flame ignition source - Amendment 1: Specimens
$103.00 ISO 12992:2017 Plastics - Vertical flame spread determination for film and sheet
$103.00 ISO/TS 15791-2:2017 Plastics - Development and use of intermediate-scale fire tests for plastics products - Part 2: Use of intermediate-scale tests for semi-finished and finished products
$45.00 ISO 4589-1:2017 Plastics - Determination of burning behaviour by oxygen index - Part 1: General requirements
$162.00 ISO 4589-2:2017 Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test
$138.00 ISO 4589-3:2017 Plastics - Determination of burning behaviour by oxygen index - Part 3: Elevated-temperature test
$185.00 ISO 5659-2:2017 Plastics - Smoke generation - Part 2: Determination of optical density by a single-chamber test
$185.00 ISO/TR 10093:2017 Plastics - Fire tests - Standard ignition sources