ISO - ICS Category: 43 - Road Vehicles Engineering

ICS Category: ISO Standards for - ICS Electronic Equipment (43.040.10)


Add to Cart Document Number Document Title
$138.00 ISO 10483-1:2004 Road vehicles - Intelligent power switches - Part 1: High-side intelligent power switch
$138.00 ISO 10483-2:1996 Road vehicles - Intelligent power switches - Part 2: Low-side intelligent power switch
$185.00 ISO 10605:2008 Road vehicles - Test methods for electrical disturbances from electrostatic discharge
$19.00 ISO 10605:2008/Amd1:2014 - Amendment 1
$103.00 ISO 10924-1:2016 Road vehicles - Circuit breakers - Part 1: Definitions and general test requirements
$123.00 ISO 10924-1:2009 Road vehicles - Circuit breakers - Part 1: Definitions and general test requirements
$138.00 ISO 10924-2:2014 Road vehicles - Circuit breakers - Part 2: Users guide
$68.00 ISO 10924-3:2015 Road vehicles - Circuit breakers - Part 3: Miniature circuit breakers with tabs (Blade type), Form CB11
$103.00 ISO 10924-4:2015 Road vehicles - Circuit breakers - Part 4: Medium circuit breakers with tabs (Blade type), Form CB15
$123.00 ISO 10924-4:2009 Road vehicles - Circuit breakers - Part 4: Medium circuit breakers with tabs (Blade type), Form CB15
$68.00 ISO 10924-5:2016 Road vehicles - Circuit breakers - Part 5: Circuit breakers with bolt with rated voltage of 450 V
$68.00 ISO 11446-1:2012 Road vehicles - Connectors for the electrical connection of towing and towed vehicles - Part 1: 13-pole connectors for vehicles with 12 V nominal supply voltage not intended to cross water fords
$45.00 ISO 11446-2:2012 Road vehicles - Connectors for the electrical connection of towing and towed vehicles - Part 2: 13-pole connectors for vehicles with 12 V nominal supply voltage intended to cross water fords
$68.00 ISO 1185:2003 Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 7-pole connector type 24 N (normal) for vehicles with 24 V nominal supply voltage
$68.00 ISO 12098:2004 Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 15-pole connector for vehicles with 24 V nominal supply voltage
$103.00 ISO 13400-1:2011 Road vehicles - Diagnostic communication over Internet Protocol (DoIP) - Part 1: General information and use case definition
$209.00 ISO 13400-2:2012 Road vehicles - Diagnostic communication over Internet Protocol (DoIP) - Part 2: Transport protocol and network layer services
$103.00 ISO 13400-3:2016 Road vehicles - Diagnostic communication over Internet Protocol (DoIP) - Part 3: Wired vehicle interface based on IEEE 802.3
$123.00 ISO 13400-3:2011 Road vehicles - Diagnostic communication over Internet Protocol (DoIP) - Part 3: Wired vehicle interface based on IEEE 802.3
$68.00 ISO 13400-4:2016 Road vehicles - Diagnostic communication over Internet Protocol (DoIP) - Part 4: Ethernet-based high-speed data link connector
$103.00 ISO 14572:2011 Road vehicles - Round, sheathed, 60 V and 600 V screened and unscreened single- or multi-core cables - Test methods and requirements for basic- and high-performance cables
$68.00 ISO 15170-1:2001 Road vehicles - Four-pole electrical connectors with pins and twist lock - Part 1: Dimensions and classes of application
$103.00 ISO 15170-2:2001 Road vehicles - Four-pole electrical connectors with pins and twist lock - Part 2: Tests and requirements
$68.00 ISO 16750-1:2006 Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 1: General
$138.00 ISO 16750-2:2012 Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 2: Electrical loads
$185.00 ISO 16750-3:2012 Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 3: Mechanical loads
$138.00 ISO 16750-4:2010 Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads
$68.00 ISO 16750-5:2010 Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 5: Chemical loads
$68.00 ISO 16844-1:2013 Road vehicles - Tachograph systems - Part 1: Electrical connectors
$45.00 ISO 16844-2:2011 Road vehicles - Tachograph systems - Part 2: Electrical interface with recording unit
$162.00 ISO 16844-3:2004 Road vehicles - Tachograph systems - Part 3: Motion sensor interface
$138.00 ISO 16844-4:2015 Road vehicles - Tachograph systems - Part 4: CAN interface
$123.00 ISO 16844-4:2004 Road vehicles - Tachograph systems - Part 4: CAN interface
$45.00 ISO 16844-5:2004 Road vehicles - Tachograph systems - Part 5: Secured CAN interface
$103.00 ISO 16844-6:2015 Road vehicles - Tachograph systems - Part 6: Diagnostics
$114.00 ISO 16844-6:2004 Road vehicles - Tachograph systems - Part 6: Diagnostics
$209.00 ISO 16844-7:2015 Road vehicles - Tachograph systems - Part 7: Parameters
$173.00 ISO 16844-7:2004 Road vehicles - Tachograph systems - Part 7: Parameters
$68.00 ISO 1724:2003 Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 7-pole connector type 12 N (normal) for vehicles with 12 V nominal supply voltage
$68.00 ISO 19072-1:2014 Road vehicles - Connection interface for pyrotechnic devices, two-way and three-way connections - Part 1: Pocket interface definition
$138.00 ISO 19072-2:2013 Road vehicles - Connection interface for pyrotechnic devices, two-way and three-way connections - Part 2: Test methods and general performance requirements
$88.00 ISO/TS 19072-3:2012 Road vehicles - Connection interface for pyrotechnic devices, two-way and three-way connections - Part 3: Pyrotechnic device and harness connector assembly - type 1
$68.00 ISO/TS 19072-4:2012 Road vehicles - Connection interface for pyrotechnic devices, two-way and three-way connections - Part 4: Pyrotechnic device and harness connector assembly - type 2
$66.00 ISO 19072-1:2007 Road vehicles - Connection interface for pyrotechnic devices, two-way and three-way connections - Part 1: Pocket interface definition
$45.00 ISO 19813:2006 Road vehicles - Ignition systems - Test methods and requirements for high voltage boots on plug-top coils and pencil coils
$138.00 ISO 20653:2013 Road vehicles - Degrees of protection (IP code) - Protection of electrical equipment against foreign objects, water and access
$68.00 ISO 20860-1:2008 Road vehicles - 50 ohms impedance radio frequency connection system interface - Part 1: Dimensions and electrical requirements
$138.00 ISO 20860-2:2009 Road vehicles - 50 ohms impedance radio frequency connection system interface - Part 2: Test procedures
$103.00 ISO 21848:2005 Road vehicles - Electrical and electronic equipment for a supply voltage of 42 V - Electrical loads
$68.00 ISO 25981:2008 Road vehicles - Connectors for the electrical connection of towing and towed vehicles - Connectors for electronically monitored charging systems with 12 V or 24 V nominal supply voltage
$232.00 ISO 26262-10:2012 Road vehicles - Functional safety - Part 10: Guideline on ISO 26262
$138.00 ISO 26262-2:2011 Road vehicles - Functional safety - Part 2: Management of functional safety
$138.00 ISO 26262-3:2011 Road vehicles - Functional safety - Part 3: Concept phase
$185.00 ISO 26262-4:2011 Road vehicles - Functional safety - Part 4: Product development at the system level
$209.00 ISO 26262-5:2011 Road vehicles - Functional safety - Part 5: Product development at the hardware level
$185.00 ISO 26262-6:2011 Road vehicles - Functional safety - Part 6: Product development at the software level
$68.00 ISO 26262-7:2011 Road vehicles - Functional safety - Part 7: Production and operation
$185.00 ISO 26262-8:2011 Road vehicles - Functional safety - Part 8: Supporting processes
$103.00 ISO 26262-9:2011 Road vehicles - Functional safety - Part 9: Automotive Safety Integrity Level (ASIL)-oriented and safety-oriented analyses
$138.00 ISO 27145-1:2012 Road vehicles - Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements - Part 1: General information and use case definition
$162.00 ISO 27145-2:2012 Road vehicles - Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements - Part 2: Common data dictionary
$185.00 ISO 27145-3:2012 Road vehicles - Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements - Part 3: Common message dictionary
$103.00 ISO 27145-4:2016 Road vehicles - Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements - Part 4: Connection between vehicle and test equipment
$123.00 ISO 27145-4:2012 Road vehicles - Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements - Part 4: Connection between vehicle and test equipment
$162.00 ISO 27145-6:2015 Road vehicles - Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements - Part 6: External test equipment
$68.00 ISO 3731:2003 Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 7-pole connector type 24 S (supplementary) for vehicles with 24 V nominal supply voltage
$68.00 ISO 3732:2003 Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 7-pole connector type 12 S (supplementary) for vehicles with 12 V nominal supply voltage
$68.00 ISO 4009:2000 Commercial vehicles -- Location of electrical and pneumatic connections between towing vehicles and trailers
$103.00 ISO 4091:2003 Road vehicles - Connectors for the electrical connection of towing and towed vehicles - Definitions, tests and requirements
$68.00 ISO 4141-1:2005 Road vehicles - Multi-core connecting cables - Part 1: Test methods and requirements for basic performance sheathed cables
$45.00 ISO 4141-2:2006 Road vehicles - Multi-core connecting cables - Part 2: Test methods and requirements for high performance sheathed cables
$45.00 ISO 4141-3:2006 Road vehicles - Multi-core connecting cables - Part 3: Construction, dimensions and marking of unscreened sheathed low-voltage cables
$68.00 ISO 4141-4:2009 Road vehicles - Multi-core connecting cables - Part 4: Test methods and requirements for coiled cable assemblies
$45.00 ISO 4165:2001 Road vehicles - Electrical connections - Double-pole connection
$185.00 ISO 6722-1:2011 Road vehicles - 60 V and 600 V single-core cables - Part 1: Dimensions, test methods and requirements for copper conductor cables
$103.00 ISO 6722-2:2013 Road vehicles - 60 V and 600 V single-core cables - Part 2: Dimensions, test methods and requirements for aluminium conductor cables
$68.00 ISO 7588-1:1998 Road vehicles - Electrical/electronic switching devices - Part 1: Relays and flashers
$45.00 ISO 7588-2:1998 Road vehicles - Electrical/electronic switching devices - Part 2: Electronic devices
$45.00 ISO 7588-3:1998 Road vehicles - Electrical/electronic switching devices - Part 3: Microrelays
$185.00 ISO 7637-2:2011 Road vehicles - Electrical disturbances from conduction and coupling - Part 2: Electrical transient conduction along supply lines only
$138.00 ISO 7637-3:2016 Road vehicles - Electrical disturbances from conduction and coupling - Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines
$149.00 ISO 7637-3:2007 Road vehicles - Electrical disturbances from conduction and coupling - Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines
$185.00 ISO/TR 7637-5:2016 Road vehicles - Electrical disturbances from conduction and coupling - Part 5: Enhanced definitions and verification methods for harmonization of pulse generators according to ISO 7637
$68.00 ISO 7638-1:2003 Road vehicles - Connectors for the electrical connection of towing and towed vehicles - Part 1: Connectors for braking systems and running gear of vehicles with 24 V nominal supply voltage
$68.00 ISO 7638-2:2003 Road vehicles - Connectors for the electrical connection of towing and towed vehicles - Part 2: Connectors for braking systems and running gear of vehicles with 12 V nominal supply voltage
$45.00 ISO 8092-1:1996 Road vehicles - Connections for on-board electrical wiring harnesses - Part 1: Tabs for single-pole connections - Dimensions and specific requirements
$162.00 ISO 8092-2:2005 Road vehicles - Connections for on-board electrical wiring harnesses - Part 2: Definitions, test methods and general performance requirements
$45.00 ISO 8092-3:1996 Road vehicles - Connections for on-board electrical wiring harnesses - Part 3: Tabs for multi-pole connections - Dimensions and specific requirements
$45.00 ISO 8092-4:1997 Road vehicles - Connections for on-board electrical wiring harnesses - Part 4: Pins for single- and multi-pole connections - Dimensions and specific requirements
$68.00 ISO 8820-1:2014 Road vehicles - Fuse-links - Part 1: Definitions and general test requirements
$88.00 ISO 8820-1:2008 Road vehicles - Fuse-links - Part 1: Definitions and general test requirements
$68.00 ISO 8820-10:2015 Road vehicles - Fuse-links - Part 10: Fuse-links with tabs Type L (high current miniature)
$103.00 ISO 8820-2:2014 Road vehicles - Fuse-links - Part 2: User guidelines
$103.00 ISO 8820-3:2015 Road vehicles - Fuse-links - Part 3: Fuse-links with tabs (blade type) Type C (medium), Type E (high current) and Type F (miniature)
$123.00 ISO 8820-3:2010 Road vehicles - Fuse-links - Part 3: Fuse-links with tabs (blade type) Type C (medium), Type E (high current) and Type F (miniature)
$103.00 ISO 8820-4:2016 Road vehicles - Fuse-links - Part 4: Fuse-links with female contacts (type A) and bolt-in contacts (type B) and their test fixtures
$123.00 ISO 8820-4:2010 Road vehicles - Fuse-links - Part 4: Fuse-links with female contacts (type A) and bolt-in contacts (type B) and their test fixtures
$103.00 ISO 8820-5:2015 Road vehicles - Fuse-links - Part 5: Fuse-links with axial terminals (Strip fuse-links) Types SF 30 and SF 51 and test fixtures
$123.00 ISO 8820-5:2007 Road vehicles - Fuse-links - Part 5: Fuse-links with axial terminals (Strip fuse-links) Types SF 30 and SF 51 and test fixtures
$68.00 ISO 8820-6:2007 Road vehicles - Fuse-links - Part 6: Single-bolt fuse-links
$123.00 ISO 8820-7:2007 Road vehicles - Fuse-links - Part 7: Fuse-links with tabs (Type G) with rated voltage of 450 V
$68.00 ISO 8820-8:2012 Road vehicles - Fuse-links - Part 8: Fuse-links with bolt-in contacts (Type H and J) with rated voltage of 450 V
$68.00 ISO 8820-9:2014 Road vehicles - Fuse-links - Part 9: Fuse-links with shortened tabs (Type K)
$232.00 ISO/PAS 19451-1:2016 Application of ISO 26262:2011-2012 to semiconductors - Part 1: Application of concepts
$68.00 ISO/PAS 19451-2:2016 Application of ISO 26262:2011-2012 to semiconductors - Part 2: Application of hardware qualification
$29.00 JIS D 5813:1994 Door switches for automobiles
$138.00 ISO 11451-1:2015 Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 1: General principles and terminology
$123.00 ISO 11451-1:2005 Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 1: General principles and terminology
$22.00 ISO 11451-1/Amd1:2008 Road vehicles - Electrical disturbances by narrowband radiated electromagnetic energy - Vehicle test methods - Part 1: General and definitions - Amendment 1
$138.00 ISO 11451-2:2015 Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 2: Off-vehicle radiation sources
$123.00 ISO 11451-2:2005 Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 2: Off-vehicle radiation sources
$209.00 ISO 11451-3:2015 Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 3: On-board transmitter simulation
$149.00 ISO 11451-3:2007 Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 3: On-board transmitter simulation
$68.00 ISO 11451-4:2013 Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 4: Bulk current injection (BCI)
$162.00 ISO 11452-1:2015 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 1: General principles and terminology
$149.00 ISO 11452-1:2005 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 1: General principles and terminology
$68.00 ISO 11452-10:2009 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 10: Immunity to conducted disturbances in the extended audio frequency range
$138.00 ISO 11452-11:2010 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 11: Reverberation chamber
$22.00 ISO 11452-1/Amd1:2008 Road vehicles - Electrical disturbances by narrowband radiated electromagnetic energy - Component test methods - Part 1: General and definitions - Amendment 1
$103.00 ISO 11452-2:2004 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 2: Absorber-lined shielded enclosure
$138.00 ISO 11452-3:2016 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 3: Transverse electromagnetic (TEM) cell
$123.00 ISO 11452-3:2001 Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 3: Transverse electromagnetic mode (TEM) cell
$162.00 ISO 11452-4:2011 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 4: Harness excitation methods
$103.00 ISO 11452-5:2002 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 5: Stripline
$68.00 ISO 11452-7:2003 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 7: Direct radio frequency (RF) power injection
$19.00 ISO 11452-7:2003/Amd1:2013 - Amendment 1
$103.00 ISO 11452-8:2015 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 8: Immunity to magnetic fields
$123.00 ISO 11452-8:2007 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 8: Immunity to magnetic fields
$185.00 ISO 11452-9:2012 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 9: Portable transmitters
$68.00 ISO 15031-1:2010 Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 1: General information and use case definition
$45.00 ISO 15031-3:2016 Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 3: Diagnostic connector and related electrical circuits: Specification and use
$232.00 ISO 15031-5:2015 Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 5: Emissions-related diagnostic services
$265.00 ISO 15031-5:2011 Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 5: Emissions-related diagnostic services
$103.00 ISO 15031-6:2015 Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 6: Diagnostic trouble code definitions
$123.00 ISO 15031-6:2010 Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 6: Diagnostic trouble code definitions
$45.00 ISO 15031-7:2013 Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 7: Data link security
$232.00 ISO 16505:2015 Road vehicles - Ergonomic and performance aspects of Camera Monitor Systems - Requirements and test procedures
$103.00 ISO/TS 21609:2014 Road vehicles - (EMC) guidelines for installation of aftermarket radio frequency transmitting equipment
$138.00 ISO 26262-1:2011 Road vehicles - Functional safety - Part 1: Vocabulary
$68.00 ISO 7637-1:2015 Road vehicles - Electrical disturbances from conduction and coupling - Part 1: Definitions and general considerations
$51.00 ISO 7637-1:2002 Road vehicles - Electrical disturbances from conduction and coupling - Part 1: Definitions and general considerations
$22.00 ISO 7637-1/Amd1:2008 Road vehicles - Electrical disturbance by conduction and coupling - Part 1: Passenger cars and light commercial vehicles with nominal 12 V supply voltage - Electrical transient conduction along supply lines only - Amendment 1
$194.00 JIS C 9910:2011 Environmentally conscious design for electrical and electronic products
$68.00 ISO 15031-2:2010 Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 2: Guidance on terms, definitions, abbreviations and acronyms