ISO - ICS Category: 71 - Chemical Technology

ICS Category: ISO Standards for - ICS Aluminium Production Materials (71.100.10)


Add to Cart Document Number Document Title
$45.00 ISO 10142:1996 Carbonaceous materials for use in the production of aluminium -- Calcined coke -- Determination of grain stability using a laboratory vibration mill
$45.00 ISO 10143:2014 Carbonaceous materials for the production of aluminium - Calcined coke for electrodes - Determination of the electrical resistivity of granules
$58.00 ISO 10143:1995 Carbonaceous materials for the production of aluminium -- Calcined coke for electrodes -- Determination of the electrical resistivity of granules
$45.00 ISO 10236:1995 Carbonaceous materials for the production of aluminium -- Green coke and calcined coke for electrodes -- Determination of bulk density (tapped)
$45.00 ISO 10237:1997 Carbonaceous materials for use in the production of aluminium -- Calcined coke -- Determination of residual-hydrogen content
$45.00 ISO 10238:1999 Carbonaceous materials used in the production of aluminium -- Pitch for electrodes -- Determination of sulfur content by an instrumental method
$45.00 ISO 11412:1998 Carbonaceous materials for the production of aluminium -- Calcined coke -- Determination of water content
$45.00 ISO 11706:2012 Carbonaceous materials for the production of aluminium - Prebaked anodes - Determination of the fracture energy
$45.00 ISO 11713:2000 Carbonaceous materials used in the production of aluminium -- Cathode blocks and baked anodes -- Determination of electrical resistivity at ambient temperature
$45.00 ISO 12315:2010 Aluminium oxide primarily used for production of aluminium - Method for calculating the Al2O3 content of smelter-grade alumina
$51.00 ISO 1232:1976 Aluminium oxide primarily used for the production of aluminium -- Determination of silica content -- Reduced molybdosilicate spectrophotometric method
$68.00 ISO 12926:2012 Aluminium fluoride for industrial use - Determination of trace elements - Wavelength dispersive X-ray fluorescence spectrometric method using pressed powder tablets
$68.00 ISO 12977:1999 Carbonaceous materials for use in the production of aluminium -- Pitch for electrodes -- Determination of volatile matter content
$68.00 ISO 12979:1999 Carbonaceous materials for use in the production of aluminium -- Pitch for electrodes -- Determination of C/H ratio in the quinoline-insoluble fraction
$68.00 ISO 12980:2000 Carbonaceous materials used in the production of aluminium - Green coke and calcined coke for electrodes - Analysis using an X-ray fluorescence method
$68.00 ISO 12981-1:2000 Carbonaceous materials used in the production of aluminium -- Calcined coke -- Determination of the reactivity to carbon dioxide -- Part 1: Loss in mass method
$68.00 ISO 12982-1:2000 Carbonaceous materials used in the production of aluminium -- Calcined coke -- Determination of the reactivity to air -- Part 1: Ignition temperature method
$45.00 ISO 12984:2000 Carbonaceous materials used in the production of aluminium -- Calcined coke -- Determination of particle size distribution
$45.00 ISO 12985-1:2000 Carbonaceous materials used in the production of aluminium -- Baked anodes and cathode blocks -- Part 1: Determination of apparent density using a dimensions method
$45.00 ISO 12985-2:2000 Carbonaceous materials used in the production of aluminium -- Baked anodes and cathode blocks -- Part 2: Determination of apparent density and of open porosity using a hydrostatic method
$45.00 ISO 12986-1:2014 Carbonaceous materials used in the production of aluminium - Prebaked anodes and cathode blocks - Part 1: Determination of bending/shear strength by the three-point method
$58.00 ISO 12986-1:2000 Carbonaceous materials used in the production of aluminium -- Prebaked anodes and cathode blocks -- Part 1: Determination of bending/shear strength by a three-point method
$68.00 ISO 12986-2:2014 Carbonaceous materials used in the production of aluminium - Prebaked anodes and cathode blocks - Part 2: Determination of flexural strength by the four-point method
$77.00 ISO 12986-2:2009 Carbonaceous materials used in the production of aluminium - Prebaked anodes and cathode blocks - Part 2: Determination of flexural strength by the four-point method
$45.00 ISO 12987:2004 Carbonaceous materials for the production of aluminium - Anodes, cathodes blocks, sidewall blocks and baked ramming pastes - Determination of the thermal conductivity using a comparative method
$68.00 ISO 12988-1:2000 Carbonaceous materials used in the production of aluminium -- Baked anodes -- Determination of the reactivity to carbon dioxide -- Part 1: Loss in mass method
$68.00 ISO 12988-2:2004 Carbonaceous materials used in the production of aluminium - Baked anodes - Determination of the reactivity to carbon dioxide - Part 2: Thermogravimetric method
$68.00 ISO 12989-1:2000 Carbonaceous materials used in the production of aluminium -- Baked anodes and sidewall blocks -- Determination of the reactivity to air -- Part 1: Loss in mass method
$103.00 ISO 12989-2:2004 Carbonaceous materials used in the production of aluminium - Baked anodes and sidewall blocks - Determination of the reactivity to air - Part 2: Thermogravimetric method
$45.00 ISO 14420:2005 Carbonaceous products for the production of aluminium - Baked anodes and shaped carbon products - Determination of the coefficient of linear thermal expansion
$45.00 ISO 14422:1999 Carbonaceous materials used in the production of aluminium -- Cold-ramming pastes -- Methods of sampling
$51.00 ISO/TS 14423:1999 Carbonaceous materials used in the production of aluminium -- Cold-ramming pastes -- Determination of effective binder content and aggregate content by extraction with quinoline, and determination of aggregate size distribution
$51.00 ISO/TS 14425:1999 Carbonaceous materials used in the production of aluminium -- Cold-ramming pastes -- Determination of volatile-matter content of unbaked pastes
$45.00 ISO 14427:2004 Carbonaceous materials used in the production of aluminium - Cold and tepid ramming pastes - Preparation of unbaked test specimens and determination of apparent density after compaction
$45.00 ISO 14428:2005 Carbonaceous materials for the production of aluminium - Cold and tepid ramming pastes - Expansion/shrinkage during baking
$68.00 ISO 14435:2005 Carbonaceous materials for the production of aluminium - Petroleum coke - Determination of trace metals by inductively coupled plasma atomic emission spectrometry
$45.00 ISO 15379-1:2015 Carbonaceous materials for the production of aluminium - Cathode block materials - Part 1: Determination of the expansion due to sodium penetration with application of pressure
$51.00 ISO 15379-1:2004 Carbonaceous materials for the production of aluminium - Cathode block materials - Part 1: Determination of the expansion due to sodium penetration with application of pressure
$45.00 ISO 15379-2:2015 Carbonaceous materials for the production of aluminium - Cathode block materials - Part 2: Determination of the expansion due to sodium penetration without application of pressure
$51.00 ISO 15379-2:2004 Carbonaceous materials for the production of aluminium - Cathode block materials - Part 2: Determination of the expansion due to sodium penetration without application of pressure
$68.00 ISO 15906:2007 Carbonaceous materials for the production of aluminium - Baked anodes - Determination of the air permeability
$51.00 ISO 1617:1976 Aluminium oxide primarily used for the production of aluminium -- Determination of sodium content -- Flame emission spectrophotometric method
$51.00 ISO 1618:1976 Aluminium oxide primarily used for the production of aluminium -- Determination of vanadium content -- N-Benzoyl-N-phenylhydroxylamine photometric method
$45.00 ISO 17499:2006 Carbonaceous materials used in the production of aluminium - Determination of baking level expressed by equivalent temperature
$68.00 ISO 17500:2006 Aluminium oxide used for the production of primary aluminium - Determination of attrition index
$45.00 ISO 17544:2004 Carbonaceous materials used in the production of aluminium - Cold and tepid ramming pastes - Determination of rammability of unbaked pastes
$68.00 ISO 18142:2014 Carbonaceous materials for the production of primary aluminium - Baked carbon bodies - Determination of the dynamic elasticity modulus by the resonance method
$45.00 ISO 18515:2014 Carbonaceous materials for the production of aluminium - Cathode blocks and baked anodes - Determination of compressive strength
$58.00 ISO 18515:2007 Carbonaceous materials for the production of aluminium - Cathode blocks and baked anodes - Determination of compressive strength
$68.00 ISO 18842:2015 Aluminium oxide primarily used for the production of aluminium - Method for the determination of tapped and untapped density
$45.00 ISO 18843:2015 Aluminium oxide primarily used for the production of aluminium - Method for the determination of flow time
$68.00 ISO 19950:2015 Aluminium oxide primarily used for the production of aluminium - Determination of alpha alumina content - Method using X-ray diffraction net peak areas
$45.00 ISO 20202:2004 Carbonaceous materials used in the production of aluminium - Cold and tepid ramming pastes - Preparation of baked test pieces and determination of loss on baking
$51.00 ISO 2069:1976 Aluminium oxide primarily used for the production of aluminium -- Determination of calcium content -- Flame atomic absorption method
$51.00 ISO 2070:1997 Aluminium oxide primarily used for the production of aluminium -- Determination of calcium content
$51.00 ISO 2071:1976 Aluminium oxide primarily used for the production of aluminium -- Determination of zinc content -- Flame atomic absorption method
$51.00 ISO 2072:1981 Aluminium oxide primarily used for the production of aluminium -- Determination of zinc content -- PAN photometric method
$45.00 ISO 2073:1976 Aluminium oxide primarily used for the production of aluminium -- Preparation of solution for analysis -- Method by hydrochloric acid attack under pressure
$45.00 ISO 21687:2007 Carbonaceous materials used in the production of aluminium - Determination of density by gas pyknometry (volumetric) using helium as the analysis gas - Solid materials
$162.00 ISO 23201:2015 Aluminium oxide primarily used for production of aluminium - Determination of trace elements - Wavelength dispersive X-ray fluorescence spectrometric method
$68.00 ISO 23202:2006 Aluminium oxide used for the production of aluminium - Determination of particles passing a 20 micrometre aperture sieve
$45.00 ISO 2828:1973 Aluminium oxide primarily used for the production of aluminium -- Determination of fluorine content -- Alizarin complexone and lanthanum chloride spectrophotometric method
$45.00 ISO 2829:1973 Aluminium oxide primarily used for the production of aluminium -- Determination of phosphorus content -- Reduced phosphomolybdate spectrophotometric method
$0.00 ISO 2865/COR1:1991 Technical corrigendum 1
$45.00 ISO 2865:1973 Aluminium oxide primarily used for the production of aluminium -- Determination of boron content -- Curcumin spectrophotometric method
$68.00 ISO 2926:2013 Aluminium oxide used for the production of primary aluminium - Particle size analysis for the range 45 m to 150 m - Method using electroformed sieves
$45.00 ISO 2927:1973 Aluminium oxide primarily used for the production of aluminium -- Sampling
$45.00 ISO 2961:1974 Aluminium oxide primarily used for the production of aluminium -- Determination of an adsorption index
$51.00 ISO 3390:1976 Aluminium oxide primarily used for the production of aluminium -- Determination of manganese content -- Flame atomic absorption method
$45.00 ISO 3429:1976 Sodium fluoride primarily used for the production of aluminium -- Determination of iron content -- 1,10- Phenanthroline photometric method
$45.00 ISO 3430:1976 Sodium fluoride primarily used for the production of aluminium -- Determination of silica content -- Reduced molybdosilicate spectrophotometric method
$45.00 ISO 3431:1976 Sodium fluoride primarily used for the production of aluminium -- Determination of soluble sulphates content -- Turbidimetric method
$45.00 ISO 3566:1976 Sodium fluoride primarily used for the production of aluminium -- Determination of chlorides content -- Turbidimetric method
$68.00 ISO 5931:2000 Carbonaceous materials used in the production of aluminium -- Calcined coke and calcined carbon products -- Determination of total sulfur by the Eschka method
$45.00 ISO 5939:1980 Carbonaceous materials for the production of aluminium -- Pitch for electrodes -- Determination of water content -- Azeotropic distillation (Dean and Stark) method
$45.00 ISO 5940:1981 Carbonaceous materials for the production of aluminium -- Pitch for electrodes -- Determination of softening point by the ring-and-ball method
$68.00 ISO 5940-2:2007 Carbonaceous materials used in the production of aluminium - Pitch for electrodes - Part 2: Determination of the softening point (Mettler softening point method)
$138.00 ISO 6257:2002 Carbonaceous materials used in the production of aluminium -- Pitch for electrodes -- Sampling (available in English only)
$45.00 ISO 6375:1980 Carbonaceous materials for the production of aluminium -- Coke for electrodes -- Sampling
$45.00 ISO 6376:1980 Carbonaceous materials for the production of aluminium -- Pitch for electrodes -- Determination of content of toluene-insoluble material
$45.00 ISO 6791:1981 Carbonaceous materials for the production of aluminium -- Pitch for electrodes -- Determination of contents of quinoline-insoluble material
$45.00 ISO 6997:1985 Carbonaceous materials for the production of aluminium -- Calcined coke -- Determination of apparent oil content -- Heating method
$0.00 ISO 6998/COR1:1999 Technical Corrigendum 1 to ISO 6998:1997
$45.00 ISO 6998:1997 Carbonaceous materials for the production of aluminium -- Pitch for electrodes -- Determination of coking value
$45.00 ISO 6999:1983 Carbonaceous materials for the production of aluminium -- Pitch for electrodes -- Determination of density -- Pycnometric method
$45.00 ISO 8003:1985 Carbonaceous materials used in the production of aluminium -- Pitch for electrodes -- Measurement of dynamic viscosity
$45.00 ISO 8004:1985 Carbonaceous materials for the production of aluminium -- Calcined coke and calcined carbon products -- Determination of the density in xylene -- Pyknometric method
$45.00 ISO 8005:2005 Carbonaceous materials used in the production of aluminium - Green and calcined coke - Determination of ash content
$45.00 ISO 8006:1985 Carbonaceous materials used in the production of aluminium -- Pitch for electrodes -- Determination of ash
$45.00 ISO 8007-1:1999 Carbonaceous materials used in the production of aluminium -- Sampling plans and sampling from individual units -- Part 1: Cathode blocks
$68.00 ISO 8007-2:1999 Carbonaceous materials used in the production of aluminium -- Sampling plans and sampling from individual units -- Part 2: Prebaked anodes
$45.00 ISO 8007-3:2003 Carbonaceous materials used in the production of aluminium - Sampling plans and sampling from individual units - Part 3: Sidewall blocks
$68.00 ISO 8008:2005 Aluminium oxide primarily used for the production of aluminium - Determination of specific surface area by nitrogen adsorption
$45.00 ISO 802:1976 Aluminium oxide primarily used for the production of aluminium -- Preparation and storage of test samples
$45.00 ISO 804:1976 Aluminium oxide primarily used for the production of aluminium -- Preparation of solution for analysis -- Method by alkaline fusion
$51.00 ISO 805:1976 Aluminium oxide primarily used for the production of aluminium -- Determination of iron content -- 1,10- Phenanthroline photometric method
$68.00 ISO 806:2004 Aluminium oxide primarily used for the production of aluminium - Determination of loss of mass at 300 degrees C and 1 000 degrees C
$45.00 ISO 8220:1986 Aluminium oxide primarily used for the production of aluminium -- Determination of the fine particle size distribution (less than 60 mu/m) -- Method using electroformed sieves
$68.00 ISO 8658:1997 Carbonaceous materials for use in the production of aluminium -- Green and calcined coke -- Determination of trace elements by flame atomic absorption spectrometry
$45.00 ISO 8723:1986 Carbonaceous materials for the production of aluminium -- Calcined coke -- Determination of oil content -- Method by solvent extraction
$51.00 ISO 900:1977 Aluminium oxide primarily used for the production of aluminium -- Determination of titanium content -- Diantipyrylmethane photometric method
$45.00 ISO 901:1976 Aluminium oxide primarily used for the production of aluminium -- Determination of absolute density -- Pyknometer method
$45.00 ISO 902:1976 Aluminium oxide primarily used for the production of aluminium -- Measurement of the angle of repose
$51.00 ISO 903:1976 Aluminium oxide primarily used for the production of aluminium -- Determination of untamped density
$45.00 ISO 9055:1988 Carbonaceous materials for the production of aluminium -- Pitch for electrodes -- Determination of sulfur content by the bomb method
$68.00 ISO 9088:1997 Carbonaceous materials used for the production of aluminium -- Cathode blocks and prebaked anodes -- Determination of the density in xylene by a pyknometric method
$45.00 ISO 9406:1995 Carbonaceous materials for the production of aluminium -- Green coke -- Determination of volatile matter content by gravimetric analysis
$68.00 ISO 20292:2009 Materials for the production of primary aluminium - Dense refractory bricks - Determination of cryolite resistance