JIS K 6770:2004 - $59.00   BUY NOW

Crosslinked polyethylene (PE-X) pipe fittings

JIS K 6770:2004 Publication Description:

--- Abstract Source: JIS K 6770:2004 ---

The method for the determination of the free-flow bulk density consists in pouring a sample from a specified funnel into a specified receptacle of known volume, and weighing the contents of the receptacle. The determination of the compacted bulk density consists in determining of the volume of a given mass of the product after a fixed number of taps (usually 100) in a jogging volumeter.

International Classification for Standards (ICS)

ICS Classification Field ICS Field Sub-Group and Number
ICS-23-Fluid ICS Plastics Fittings (23.040.45)
ICS-83-Rubber ICS Plastics Pipes/Fittings (83.140.30)

ICS Related Standards

Cart Document Number Document Title
$45.00 ISO 10147:2011 Pipes and fittings made of crosslinked polyethylene (PE-X) - Estimation of the degree of crosslinking by determination of the gel content
$185.00 ISO/TR 10358:1993 Plastics pipes and fittings -- Combined chemical-resistance classification table
$68.00 ISO 10508:2006 Plastics piping systems for hot and cold water installations - Guidance for classification and design
$185.00 ISO 10928:2016 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Methods for regression analysis and their use
$240.00 ISO 10928:2009 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Methods for regression analysis and their use
$22.00 ISO 10928:2009/Amd1:2013 - Amendment 1
$68.00 ISO 10952:2014 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Determination of the resistance to chemical attack for the inside of a section in a deflected condition
$103.00 ISO 11296-1:2009 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 1: General
$138.00 ISO 11296-3:2009 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 3: Lining with close-fit pipes
$162.00 ISO 11296-4:2009 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes
$103.00 ISO 11296-7:2011 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 7: Lining with spirally-wound pipes
$103.00 ISO 11297-1:2013 Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 1: General
$103.00 ISO 11297-3:2013 Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 3: Lining with close-fit pipes
$103.00 ISO 11298-1:2010 Plastics piping systems for renovation of underground water supply networks - Part 1: General
$103.00 ISO 11298-3:2010 Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close-fit pipes
$103.00 ISO 11299-1:2011 Plastics piping systems for renovation of underground gas supply networks - Part 1: General
$103.00 ISO 11299-3:2011 Plastics piping systems for renovation of underground gas supply networks - Part 3: Lining with close-fit pipes
$68.00 ISO 1167-1:2006 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 1: General method
$45.00 ISO 1167-2:2006 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 2: Preparation of pipe test pieces
$68.00 ISO 1167-3:2007 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 3: Preparation of components
$45.00 ISO 1167-4:2007 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 4: Preparation of assemblies
$68.00 ISO 12162:2009 Thermoplastics materials for pipes and fittings for pressure applications - Classification, designation and design coefficient
$138.00 ISO 12176-1:2012 Plastics pipes and fittings - Equipment for fusion jointing polyethylene systems - Part 1: Butt fusion
$138.00 ISO 12176-2:2008 Plastics pipes and fittings - Equipment for fusion jointing polyethylene systems - Part 2: Electrofusion
$68.00 ISO 12176-3:2011 Plastics pipes and fittings - Equipment for fusion jointing polyethylene systems - Part 3: Operators badge
$138.00 ISO 12176-4:2003 Plastics pipes and fittings - Equipment for fusion jointing polyethylene systems - Part 4: Traceability coding
$68.00 ISO 13260:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading
$45.00 ISO 13262:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam
$45.00 ISO 13263:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for impact strength
$45.00 ISO 13264:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for mechanical strength or flexibility of fabricated fittings
$103.00 ISO 13265:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Joints for buried non-pressure applications - Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure
$45.00 ISO 13266:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of resistance against surface and traffic loading
$68.00 ISO 13267:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics inspection chamber and manhole bases - Test methods for buckling resistance
$68.00 ISO 13268:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of ring stiffness
$138.00 ISO 13272:2011 Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP), polypropylene with mineral modifiers (PP-MD) and polyethylene (PE) - Specifications for manholes and inspection chambers in traffic areas and underground installations
$45.00 ISO 13761:1996 Plastics pipes and fittings -- Pressure reduction factors for polyethylene pipeline systems for use at temperatures above 20 degrees C
$45.00 ISO 13924:2000 Plastics pipes and fittings - Bending-tensile cycle test for PE/metal transition fittings, PE tapping tees and PE branch saddles
$209.00 ISO 13950:2007 Plastics pipes and fittings - Automatic recognition systems for electrofusion joints
$45.00 ISO 13957:1997 Plastics pipes and fittings -- Polyethylene (PE) tapping tees -- Test method for impact resistance
$45.00 ISO 13966:1998 Thermoplastics pipes and fittings -- Nominal ring stiffnesses
$103.00 ISO 13967:2009 Thermoplastics fittings - Determination of ring stiffness
$68.00 ISO 1452-1:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: General
$138.00 ISO 1452-2:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Pipes
$185.00 ISO 1452-3:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 3: Fittings
$68.00 ISO 1452-4:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 4: Valves
$103.00 ISO 1452-5:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 5: Fitness for purpose of the system
$138.00 ISO 14531-1:2002 Plastics pipes and fittings - Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels - Metric series Specifications - Part 1: Pipes
$162.00 ISO 14531-2:2004 Plastics pipes and fittings - Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels - Metric series - Specifications - Part 2: Fittings for heat-fusion jointing
$138.00 ISO 14531-3:2010 Plastics pipes and fittings - Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels - Metric series - Specifications - Part 3: Fittings for mechanical jointing (including PE-X/metal transitions)
$103.00 ISO 14531-4:2006 Plastics pipes and fittings - Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels - Metric series - Specifications - Part 4: System design and installation guidelines
$45.00 ISO 15306:2003 Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the resistance to cyclic internal pressure
$19.00 ISO 15306/Amd1:2012 Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the resistance to cyclic internal pressure - Amendment 1
$103.00 ISO 15874-3:2013 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings
$68.00 ISO 15875-3:2003 Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings
$103.00 ISO 15876-3:2017 Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings
$88.00 ISO 15876-3:2003 Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 3: Fittings
$138.00 ISO 15877-3:2009 Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings
$19.00 ISO 15877-3/Amd1:2010 Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings - Amendment 1
$103.00 ISO 16241:2005 Notch tensile test to measure the resistance to slow crack growth of polyethylene materials for pipe and fitting products (PENT)
$138.00 ISO 16422:2014 Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure - Specifications
$68.00 ISO 16871:2003 Plastics piping and ducting systems - Plastics pipes and fittings - Method for exposure to direct (natural) weathering
$45.00 ISO/TR 16913:1999 Plastics pipes and fittings -- Definitions of types of test
$138.00 ISO 17467-1:2012 Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems jointed by solvent cement - Part 1: General
$68.00 ISO 17467-2:2012 Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems jointed by solvent cement - Part 2: Pipes
$45.00 ISO 17467-3:2012 Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems jointed by solvent cement - Part 3: Fittings
$162.00 ISO 17484-1:2014 Plastics piping systems - Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) - Part 1: Specifications for systems
$68.00 ISO 17484-2:2009 Plastics piping systems - Multilayer pipe systems for indoor gas installations - Part 2: Code of pratice
$185.00 ISO 17885:2015 Plastics piping systems - Mechanical fittings for pressure piping systems - Specifications
$19.00 ISO 17885:2015/Amd1:2016 - Amendment 1
$103.00 ISO/TS 17902:2016 Wrapped electrofoaming joints for polyethylene (PE) piping systems with smooth outer wall for gravity drains and sewers
$103.00 ISO 18225:2012 Plastics piping systems - Multilayer piping systems for outdoor gas installations - Specifications for systems
$185.00 ISO/TS 18226:2006 Plastics pipes and fittings - Reinforced thermoplastics pipe systems for the supply of gaseous fuels for pressures up to 4 MPa (40 bar)
$68.00 ISO 18488:2015 Polyethylene (PE) materials for piping systems - Determination of Strain Hardening Modulus in relation to slow crack growth - Test method
$68.00 ISO 18489:2015 Polyethylene (PE) materials for piping systems - Determination of resistance to slow crack growth under cyclic loading - Cracked Round Bar test method
$68.00 ISO 18553:2002 Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds
$19.00 ISO 18553/Amd1:2007 Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds - Amendment 1
$209.00 ISO 18672-1:2009 Plastics piping systems for non-pressure drainage and sewerage - Polyester resin concrete (PRC) - Part 1: Pipes and fittings with flexible joints
$103.00 ISO/TR 19480:2005 Polyethylene pipes and fittings for the supply of gaseous fuels or water - Training and assessment of fusion operators
$68.00 ISO 19893:2011 Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling
$45.00 ISO/TS 19911:2010 Plastics pipes and fittings - Format of a technical file for characterizing PE spigot end fittings
$68.00 ISO 21003-3:2008 Multilayer piping systems for hot and cold water installations inside buildings - Part 3: Fittings
$138.00 ISO 21004:2006 Plastics piping systems - Multilayer pipes and their joints, based on thermoplastics, for water supply
$103.00 ISO 21138-1:2007 Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: Material specifications and performance criteria for pipes, fittings and system
$185.00 ISO 21138-2:2007 Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Pipes and fittings with smooth external surface, Type A
$185.00 ISO 21138-3:2007 Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 3: Pipes and fittings with non-smooth external surface, Type B
$68.00 ISO 21307:2011 Plastics pipes and fittings - Butt fusion jointing procedures for polyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems
$68.00 ISO 21751:2011 Plastics pipes and fittings - Decohesion test of electrofusion assemblies - Strip-bend test
$103.00 ISO 22391-3:2009 Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings
$45.00 ISO 2507-1:1995 Thermoplastics pipes and fittings -- Vicat softening temperature -- Part 1: General test method
$45.00 ISO 2507-2:1995 Thermoplastics pipes and fittings -- Vicat softening temperature -- Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly(vinyl chloride) (PVC-HI) pipes
$45.00 ISO 2507-3:1995 Thermoplastics pipes and fittings -- Vicat softening temperature -- Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings
$138.00 ISO 265-1:1988 Pipes and fittings of plastics materials - Fittings for domestic and industrial waste pipes - Basic dimensions : Metric series - Part 1: Unplasticized poly(vinyl chloride) (PVC-U)
$45.00 ISO/TS 26873:2010 Plastics pipes and fittings - Definition and construction procedures for reference lines
$45.00 ISO 3514:1976 Chlorinated polyvinyl chloride (CPVC) pipes and fittings -- Specification and determination of density
$45.00 ISO 3603:1977 Fittings for unplasticized polyvinyl chloride (PVC) pressure pipes with elastic sealing ring type joints -- Pressure test for leakproofness
$45.00 ISO 4132:1979 Unplasticized polyvinyl chloride (PVC) and metal adaptor fittings for pipes under pressure -- Laying lengths and size of threads -- Metric series
$103.00 ISO 4427-1:2007 Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - Part 1: General
$19.00 ISO 4427-1:2007/Amd1:2015 - Amendment 1: Melt mass-flow rate (MFR) for PE 80 and PE 100
$162.00 ISO 4427-3:2007 Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - Part 3: Fittings
$68.00 ISO 4427-5:2007 Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - Part 5: Fitness for purpose of the system
$45.00 ISO 4439:1979 Unplasticized polyvinyl chloride (PVC) pipes and fittings -- Determination and specification of density
$45.00 ISO 580:2005 Plastics piping and ducting systems - Injection-moulded thermoplastics fittings - Methods for visually assessing the effects of heating
$45.00 ISO 7245:1984 Pipes and fittings of acrylonitrile/butadiene/styrene (ABS) -- General specification for moulding and extrusion materials
$45.00 ISO 7246:1984 Pipes and fittings of acrylonitrile/styrene/acrylester (ASA) -- General specification for moulding and extrusion materials
$45.00 ISO 727-1:2002 Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure - Part 1: Metric series
$68.00 ISO 727-2:2005 Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure - Part 2: Inch-based series
$68.00 ISO 7432:2002 Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods to prove the design of locked socket-and-spigot joints, including double-socket joints, with elastomeric seals
$45.00 ISO 7510:1997 Plastics piping systems -- Glass-reinforced plastics (GRP) components -- Determination of the amounts of constituents using the gravimetric method
$45.00 ISO 7511:1999 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods to prove the leaktightness of the wall under short-term internal pressure
$45.00 ISO 7686:2005 Plastics pipes and fittings - Determination of opacity
$68.00 ISO 8283-1:1991 Plastics pipes and fittings - Dimensions of sockets and spigots for discharge systems inside buildings - Part 1: Unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C)
$45.00 ISO 8283-2:1992 Plastics pipes and fittings - Dimensions of sockets and spigots for discharge systems inside buildings - Part 2: Polyethylene (PE)
$45.00 ISO 8283-3:1992 Plastics pipes and fittings - Dimensions of sockets and spigots for discharge systems inside buildings - Part 3: Polypropylene (PP)
$68.00 ISO 8283-4:1992 Plastics pipes and fittings - Dimensions of sockets and spigots for discharge systems inside buildings - Part 4: Acrylonitrile/butadiene/styrene (ABS)
$45.00 ISO 8361-1:1991 Thermoplastics pipes and fittings -- Water absorption -- Part 1: General test method
$45.00 ISO 8361-2:1991 Thermoplastics pipes and fittings -- Water absorption -- Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings
$45.00 ISO 8361-3:1991 Thermoplastics pipes and fittings -- Water absorption -- Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) pipes and fittings
$68.00 ISO 8483:2003 Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods to prove the design of bolted flange joints
$19.00 ISO 8483/Amd1:2012 Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods to prove the design of bolted flange joints - Amendment 1
$68.00 ISO 8533:2003 Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods to prove the design of cemented or wrapped joints
$19.00 ISO 8533/Amd1:2012 Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods to prove the design of cemented or wrapped joints - Amendment 1
$138.00 ISO 8772:2006 Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE)
$138.00 ISO 8773:2006 Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP)
$45.00 ISO 9623:1997 PE/metal and PP/metal adaptor fittings for pipes for fluids under pressure -- Design lengths and size of threads -- Metric series
$45.00 ISO 9853:1991 Injection-moulded unplasticized poly(vinyl chloride) (PVC-U) fittings for pressure pipe systems -- Crushing test
$97.00 JIS K 6770:2016 Crosslinked polyethylene (PE-X) pipe fittings
$9.00 JIS K 6770:2004/AMENDMENT 3:2010 Crosslinked polyethylene (PE-X) pipe fittings (Amendment 3)
$10.00 JIS K 6777:2007/AMENDMENT 2:2010 Chlorinated poly (vinyl chloride) (PVC-C) pipe fittings for hot and cold water supply (Amendment 2)
$68.00 JIS K 6779:2004 Polybutene (PB) pipe fittings
$10.00 JIS K 6779:2004/AMENDMENT 2:2010 Polybutene (PB) pipe fittings (Amendment 2)
$97.00 JIS K 6788:2016 Crosslinked polyethylene (PE-X) pipe fittings for water supply
$59.00 JIS K 6788:2004 Crosslinked polyethylene (PE-X) pipe fittings for water supply
$9.00 JIS K 6788:2004/AMENDMENT 2:2010 Crosslinked polyethylene (PE-X) pipe fittings for water supply (Amendment 2)
$10.00 JIS K 6793:2004/AMENDMENT 2:2010 Polybutene (PB) pipe fittings for water supply (Amendment 2)
$138.00 ISO 12176-1:2017 Plastics pipes and fittings - Equipment for fusion jointing polyethylene systems - Part 1: Butt fusion
$19.00 ISO 13260:2010/Amd1:2017 - Amendment 1
$45.00 ISO 13761:2017 Plastics pipes and fittings - Pressure reduction factors for polyethylene pipeline systems for use at temperatures above 20 degrees C
$138.00 ISO 16611:2017 Plastics piping systems for drainage and sewerage without pressure - Non-circular pipes and joints made of glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resins (UP) - Dimensions, requirements and tests
$45.00 ISO 7510:2017 Plastics piping systems - Glass-reinforced plastics (GRP) components - Determination of the amounts of constituents
$103.00 ISO 21307:2017 Plastics pipes and fittings - Butt fusion jointing procedures for polyethylene (PE) piping systems
$88.00 ISO 10838-1:2000 Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels -- Part 1: Metal fittings for pipes of nominal outside diameter less than or equal to 63 mm
$123.00 ISO 10838-3:2001 Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels -- Part 3: Thermoplastics fittings for pipes of nominal outside diameter less than or equal to 63 mm
$173.00 ISO 10933:1997 Polyethylene (PE) valves for gas distribution systems
$68.00 ISO 11424:2017 Rubber hoses and tubing for air and vacuum systems for internal-combustion engines - Specification
$45.00 ISO 11424:1996 Rubber hoses and tubing for air and vacuum systems for internal-combustion engines - Specification
$103.00 ISO 13775-1:2015 Thermoplastic tubing and hoses for automotive use - Part 1: Non-fuel applications
$88.00 ISO 13775-1:2000 Thermoplastic tubing and hoses for automotive use - Part 1: Non-fuel applications
$138.00 ISO 13775-2:2016 Thermoplastic tubing and hoses for automotive use - Part 2: Petroleum-based-fuel applications
$123.00 ISO 13775-2:2000 Thermoplastic tubing and hoses for automotive use - Part 2: Petroleum-based-fuel applications
$51.00 ISO 13844:2000 Plastics piping systems - Elastomeric-sealing-ring-type socket joints of unplasticized poly(vinyl chloride) (PVC-U) for use with PVC-U pipes - Test method for leaktightness under negative pressure
$51.00 ISO 13845:2000 Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for leaktightness under internal pressure and with angular deflection
$123.00 ISO 14236:2000 Plastics pipes and fittings - Mechanical-joint compression fittings for use with polyethylene pressure pipes in water supply systems
$138.00 ISO 14692-1:2002 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 1: Vocabulary, symbols, applications and materials
$232.00 ISO 14692-2:2002 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 2: Qualification and manufacture
$209.00 ISO 14692-3:2002 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 3: System design
$209.00 ISO 14692-4:2002 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 4: Fabrication, installation and operation
$162.00 ISO 15840:2004 Ships and marine technology - Standard specification for thermosetting resin fibreglass pipe and fittings to be used for marine applications
$138.00 ISO 16486-1:2012 Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 1: General
$19.00 ISO 16486-1:2012/Amd1:2014 - Amendment 1
$68.00 ISO 16486-2:2012 Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 2: Pipes
$19.00 ISO 16486-2:2012/Amd1:2014 - Amendment 1
$103.00 ISO 16486-3:2012 Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 3: Fittings
$19.00 ISO 16486-3:2012/Amd1:2014 - Amendment 1
$103.00 ISO 16486-4:2016 Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 4: Valves
$138.00 ISO 16486-5:2012 Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 5: Fitness for purpose of the system
$138.00 ISO 16486-6:2012 Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 6: Code of practice for design, handling and installation
$103.00 ISO 4437-1:2014 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General
$103.00 ISO 4437-2:2014 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 2: Pipes
$162.00 ISO 4437-3:2014 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 3: Fittings
$103.00 ISO 4437-4:2015 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 4: Valves
$68.00 ISO 4437-5:2014 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 5: Fitness for purpose of the system
$103.00 ISO 6993-1:2006 Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels - Part 1: Pipes for a maximum operating pressure of 1 bar (100 kPa)
$103.00 ISO 6993-2:2006 Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels - Part 2: Fittings for a maximum operating pressure of 200 mbar (20 kPa)
$138.00 ISO 6993-3:2006 Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels - Part 3: Fittings and saddles for a maximum operating pressure of 1 bar (100 kPa)
$103.00 ISO 6993-4:2006 Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels - Part 4: Code of practice for design, handling and installation
$138.00 ISO 7628:2010 Road vehicles - Thermoplastics tubing for air braking systems
$45.00 ISO 8233:1988 Thermoplastics valves - Torque - Test method
$45.00 ISO 8659:1989 Thermoplastics valves - Fatigue strength - Test method
$68.00 ISO 9393-1:2004 Thermoplastics valves for industrial applications - Pressure test methods and requirements - Part 1: General
$45.00 ISO 9393-2:2005 Thermoplastics valves for industrial applications - Pressure test methods and requirements - Part 2: Test conditions and basic requirements
$45.00 ISO 9808:1990 Solar water heaters - Elastomeric materials for absorbers, connecting pipes and fittings - Method of assessment
$107.00 JIS K 6741:2016 Unplasticized poly(vinyl chloride) (PVC-U) pipes
$107.00 JIS K 6741:2007 Unplasticized poly (vinyl chloride) (PVC-U) pipes
$107.00 JIS K 6762:2012 Double wall polyethylene pipes for water supply
$97.00 JIS K 6770:2016 Crosslinked polyethylene (PE-X) pipe fittings
$9.00 JIS K 6770:2004/AMENDMENT 3:2010 Crosslinked polyethylene (PE-X) pipe fittings (Amendment 3)
$78.00 JIS K 6776:2016 Chlorinated poly(vinyl chloride) (PVC-C) pipes for hot and cold water supply
$87.00 JIS K 6776:2007 Chlorinated poly (vinyl chloride) (PVC-C) pipes for hot and cold water supply
$10.00 JIS K 6777:2007/AMENDMENT 2:2010 Chlorinated poly (vinyl chloride) (PVC-C) pipe fittings for hot and cold water supply (Amendment 2)
$68.00 JIS K 6779:2004 Polybutene (PB) pipe fittings
$10.00 JIS K 6779:2004/AMENDMENT 2:2010 Polybutene (PB) pipe fittings (Amendment 2)
$68.00 JIS K 6787:2004 Crosslinked polyethylene (PE-X) pipes for water supply
$97.00 JIS K 6788:2016 Crosslinked polyethylene (PE-X) pipe fittings for water supply
$59.00 JIS K 6788:2004 Crosslinked polyethylene (PE-X) pipe fittings for water supply
$9.00 JIS K 6788:2004/AMENDMENT 2:2010 Crosslinked polyethylene (PE-X) pipe fittings for water supply (Amendment 2)
$10.00 JIS K 6793:2004/AMENDMENT 2:2010 Polybutene (PB) pipe fittings for water supply (Amendment 2)
$209.00 ISO 14692-1:2017 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 1: Vocabulary, symbols, applications and materials
$209.00 ISO 14692-2:2017 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 2: Qualification and manufacture
$185.00 ISO 14692-3:2017 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 3: System design
$209.00 ISO 14692-4:2017 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 4: Fabrication, installation and operation