JIS C 9910:2011 - $194.00   BUY NOW

Environmentally conscious design for electrical and electronic products

JIS C 9910:2011 Publication Description:

--- Abstract Source: JIS C 9910:2011 ---

Specifies a test method. Describes the principle, the reagents, the apparatus, the test procedure, the expression of results, and the contents of the test report.

International Classification for Standards (ICS)

ICS Classification Field ICS Field Sub-Group and Number
ICS-13-Environment ICS Environmental Protection (13.020)
ICS-43-Road ICS Electronic Equipment (43.040.10)

ICS Related Standards

Cart Document Number Document Title
$138.00 ISO 10483-1:2004 Road vehicles - Intelligent power switches - Part 1: High-side intelligent power switch
$138.00 ISO 10483-2:1996 Road vehicles - Intelligent power switches - Part 2: Low-side intelligent power switch
$185.00 ISO 10605:2008 Road vehicles - Test methods for electrical disturbances from electrostatic discharge
$19.00 ISO 10605:2008/Amd1:2014 - Amendment 1
$103.00 ISO 10924-1:2016 Road vehicles - Circuit breakers - Part 1: Definitions and general test requirements
$123.00 ISO 10924-1:2009 Road vehicles - Circuit breakers - Part 1: Definitions and general test requirements
$138.00 ISO 10924-2:2014 Road vehicles - Circuit breakers - Part 2: Users guide
$68.00 ISO 10924-3:2015 Road vehicles - Circuit breakers - Part 3: Miniature circuit breakers with tabs (Blade type), Form CB11
$103.00 ISO 10924-4:2015 Road vehicles - Circuit breakers - Part 4: Medium circuit breakers with tabs (Blade type), Form CB15
$123.00 ISO 10924-4:2009 Road vehicles - Circuit breakers - Part 4: Medium circuit breakers with tabs (Blade type), Form CB15
$68.00 ISO 10924-5:2016 Road vehicles - Circuit breakers - Part 5: Circuit breakers with bolt with rated voltage of 450 V
$68.00 ISO 11446-1:2012 Road vehicles - Connectors for the electrical connection of towing and towed vehicles - Part 1: 13-pole connectors for vehicles with 12 V nominal supply voltage not intended to cross water fords
$45.00 ISO 11446-2:2012 Road vehicles - Connectors for the electrical connection of towing and towed vehicles - Part 2: 13-pole connectors for vehicles with 12 V nominal supply voltage intended to cross water fords
$138.00 ISO 11451-1:2015 Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 1: General principles and terminology
$123.00 ISO 11451-1:2005 Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 1: General principles and terminology
$22.00 ISO 11451-1/Amd1:2008 Road vehicles - Electrical disturbances by narrowband radiated electromagnetic energy - Vehicle test methods - Part 1: General and definitions - Amendment 1
$138.00 ISO 11451-2:2015 Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 2: Off-vehicle radiation sources
$123.00 ISO 11451-2:2005 Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 2: Off-vehicle radiation sources
$209.00 ISO 11451-3:2015 Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 3: On-board transmitter simulation
$149.00 ISO 11451-3:2007 Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 3: On-board transmitter simulation
$68.00 ISO 11451-4:2013 Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 4: Bulk current injection (BCI)
$162.00 ISO 11452-1:2015 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 1: General principles and terminology
$149.00 ISO 11452-1:2005 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 1: General principles and terminology
$68.00 ISO 11452-10:2009 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 10: Immunity to conducted disturbances in the extended audio frequency range
$138.00 ISO 11452-11:2010 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 11: Reverberation chamber
$22.00 ISO 11452-1/Amd1:2008 Road vehicles - Electrical disturbances by narrowband radiated electromagnetic energy - Component test methods - Part 1: General and definitions - Amendment 1
$103.00 ISO 11452-2:2004 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 2: Absorber-lined shielded enclosure
$138.00 ISO 11452-3:2016 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 3: Transverse electromagnetic (TEM) cell
$123.00 ISO 11452-3:2001 Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 3: Transverse electromagnetic mode (TEM) cell
$162.00 ISO 11452-4:2011 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 4: Harness excitation methods
$103.00 ISO 11452-5:2002 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 5: Stripline
$68.00 ISO 11452-7:2003 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 7: Direct radio frequency (RF) power injection
$19.00 ISO 11452-7:2003/Amd1:2013 - Amendment 1
$103.00 ISO 11452-8:2015 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 8: Immunity to magnetic fields
$123.00 ISO 11452-8:2007 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 8: Immunity to magnetic fields
$185.00 ISO 11452-9:2012 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 9: Portable transmitters
$68.00 ISO 1185:2003 Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 7-pole connector type 24 N (normal) for vehicles with 24 V nominal supply voltage
$68.00 ISO 12098:2004 Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 15-pole connector for vehicles with 24 V nominal supply voltage
$103.00 ISO 13400-1:2011 Road vehicles - Diagnostic communication over Internet Protocol (DoIP) - Part 1: General information and use case definition
$209.00 ISO 13400-2:2012 Road vehicles - Diagnostic communication over Internet Protocol (DoIP) - Part 2: Transport protocol and network layer services
$103.00 ISO 13400-3:2016 Road vehicles - Diagnostic communication over Internet Protocol (DoIP) - Part 3: Wired vehicle interface based on IEEE 802.3
$123.00 ISO 13400-3:2011 Road vehicles - Diagnostic communication over Internet Protocol (DoIP) - Part 3: Wired vehicle interface based on IEEE 802.3
$68.00 ISO 13400-4:2016 Road vehicles - Diagnostic communication over Internet Protocol (DoIP) - Part 4: Ethernet-based high-speed data link connector
$103.00 ISO 14572:2011 Road vehicles - Round, sheathed, 60 V and 600 V screened and unscreened single- or multi-core cables - Test methods and requirements for basic- and high-performance cables
$68.00 ISO 15031-1:2010 Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 1: General information and use case definition
$68.00 ISO 15031-2:2010 Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 2: Guidance on terms, definitions, abbreviations and acronyms
$45.00 ISO 15031-3:2016 Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 3: Diagnostic connector and related electrical circuits: Specification and use
$232.00 ISO 15031-5:2015 Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 5: Emissions-related diagnostic services
$265.00 ISO 15031-5:2011 Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 5: Emissions-related diagnostic services
$103.00 ISO 15031-6:2015 Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 6: Diagnostic trouble code definitions
$123.00 ISO 15031-6:2010 Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 6: Diagnostic trouble code definitions
$45.00 ISO 15031-7:2013 Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 7: Data link security
$68.00 ISO 15170-1:2001 Road vehicles - Four-pole electrical connectors with pins and twist lock - Part 1: Dimensions and classes of application
$103.00 ISO 15170-2:2001 Road vehicles - Four-pole electrical connectors with pins and twist lock - Part 2: Tests and requirements
$232.00 ISO 16505:2015 Road vehicles - Ergonomic and performance aspects of Camera Monitor Systems - Requirements and test procedures
$68.00 ISO 16750-1:2006 Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 1: General
$138.00 ISO 16750-2:2012 Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 2: Electrical loads
$185.00 ISO 16750-3:2012 Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 3: Mechanical loads
$138.00 ISO 16750-4:2010 Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads
$68.00 ISO 16750-5:2010 Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 5: Chemical loads
$68.00 ISO 16844-1:2013 Road vehicles - Tachograph systems - Part 1: Electrical connectors
$45.00 ISO 16844-2:2011 Road vehicles - Tachograph systems - Part 2: Electrical interface with recording unit
$162.00 ISO 16844-3:2004 Road vehicles - Tachograph systems - Part 3: Motion sensor interface
$138.00 ISO 16844-4:2015 Road vehicles - Tachograph systems - Part 4: CAN interface
$123.00 ISO 16844-4:2004 Road vehicles - Tachograph systems - Part 4: CAN interface
$45.00 ISO 16844-5:2004 Road vehicles - Tachograph systems - Part 5: Secured CAN interface
$103.00 ISO 16844-6:2015 Road vehicles - Tachograph systems - Part 6: Diagnostics
$114.00 ISO 16844-6:2004 Road vehicles - Tachograph systems - Part 6: Diagnostics
$209.00 ISO 16844-7:2015 Road vehicles - Tachograph systems - Part 7: Parameters
$173.00 ISO 16844-7:2004 Road vehicles - Tachograph systems - Part 7: Parameters
$68.00 ISO 1724:2003 Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 7-pole connector type 12 N (normal) for vehicles with 12 V nominal supply voltage
$68.00 ISO 19072-1:2014 Road vehicles - Connection interface for pyrotechnic devices, two-way and three-way connections - Part 1: Pocket interface definition
$138.00 ISO 19072-2:2013 Road vehicles - Connection interface for pyrotechnic devices, two-way and three-way connections - Part 2: Test methods and general performance requirements
$88.00 ISO/TS 19072-3:2012 Road vehicles - Connection interface for pyrotechnic devices, two-way and three-way connections - Part 3: Pyrotechnic device and harness connector assembly - type 1
$68.00 ISO/TS 19072-4:2012 Road vehicles - Connection interface for pyrotechnic devices, two-way and three-way connections - Part 4: Pyrotechnic device and harness connector assembly - type 2
$66.00 ISO 19072-1:2007 Road vehicles - Connection interface for pyrotechnic devices, two-way and three-way connections - Part 1: Pocket interface definition
$45.00 ISO 19813:2006 Road vehicles - Ignition systems - Test methods and requirements for high voltage boots on plug-top coils and pencil coils
$138.00 ISO 20653:2013 Road vehicles - Degrees of protection (IP code) - Protection of electrical equipment against foreign objects, water and access
$68.00 ISO 20860-1:2008 Road vehicles - 50 ohms impedance radio frequency connection system interface - Part 1: Dimensions and electrical requirements
$138.00 ISO 20860-2:2009 Road vehicles - 50 ohms impedance radio frequency connection system interface - Part 2: Test procedures
$103.00 ISO/TS 21609:2014 Road vehicles - (EMC) guidelines for installation of aftermarket radio frequency transmitting equipment
$103.00 ISO 21848:2005 Road vehicles - Electrical and electronic equipment for a supply voltage of 42 V - Electrical loads
$68.00 ISO 25981:2008 Road vehicles - Connectors for the electrical connection of towing and towed vehicles - Connectors for electronically monitored charging systems with 12 V or 24 V nominal supply voltage
$138.00 ISO 26262-1:2011 Road vehicles - Functional safety - Part 1: Vocabulary
$232.00 ISO 26262-10:2012 Road vehicles - Functional safety - Part 10: Guideline on ISO 26262
$138.00 ISO 26262-2:2011 Road vehicles - Functional safety - Part 2: Management of functional safety
$138.00 ISO 26262-3:2011 Road vehicles - Functional safety - Part 3: Concept phase
$185.00 ISO 26262-4:2011 Road vehicles - Functional safety - Part 4: Product development at the system level
$209.00 ISO 26262-5:2011 Road vehicles - Functional safety - Part 5: Product development at the hardware level
$185.00 ISO 26262-6:2011 Road vehicles - Functional safety - Part 6: Product development at the software level
$68.00 ISO 26262-7:2011 Road vehicles - Functional safety - Part 7: Production and operation
$185.00 ISO 26262-8:2011 Road vehicles - Functional safety - Part 8: Supporting processes
$103.00 ISO 26262-9:2011 Road vehicles - Functional safety - Part 9: Automotive Safety Integrity Level (ASIL)-oriented and safety-oriented analyses
$138.00 ISO 27145-1:2012 Road vehicles - Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements - Part 1: General information and use case definition
$162.00 ISO 27145-2:2012 Road vehicles - Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements - Part 2: Common data dictionary
$185.00 ISO 27145-3:2012 Road vehicles - Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements - Part 3: Common message dictionary
$103.00 ISO 27145-4:2016 Road vehicles - Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements - Part 4: Connection between vehicle and test equipment
$123.00 ISO 27145-4:2012 Road vehicles - Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements - Part 4: Connection between vehicle and test equipment
$162.00 ISO 27145-6:2015 Road vehicles - Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements - Part 6: External test equipment
$68.00 ISO 3731:2003 Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 7-pole connector type 24 S (supplementary) for vehicles with 24 V nominal supply voltage
$68.00 ISO 3732:2003 Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 7-pole connector type 12 S (supplementary) for vehicles with 12 V nominal supply voltage
$68.00 ISO 4009:2000 Commercial vehicles -- Location of electrical and pneumatic connections between towing vehicles and trailers
$103.00 ISO 4091:2003 Road vehicles - Connectors for the electrical connection of towing and towed vehicles - Definitions, tests and requirements
$68.00 ISO 4141-1:2005 Road vehicles - Multi-core connecting cables - Part 1: Test methods and requirements for basic performance sheathed cables
$45.00 ISO 4141-2:2006 Road vehicles - Multi-core connecting cables - Part 2: Test methods and requirements for high performance sheathed cables
$45.00 ISO 4141-3:2006 Road vehicles - Multi-core connecting cables - Part 3: Construction, dimensions and marking of unscreened sheathed low-voltage cables
$68.00 ISO 4141-4:2009 Road vehicles - Multi-core connecting cables - Part 4: Test methods and requirements for coiled cable assemblies
$45.00 ISO 4165:2001 Road vehicles - Electrical connections - Double-pole connection
$185.00 ISO 6722-1:2011 Road vehicles - 60 V and 600 V single-core cables - Part 1: Dimensions, test methods and requirements for copper conductor cables
$103.00 ISO 6722-2:2013 Road vehicles - 60 V and 600 V single-core cables - Part 2: Dimensions, test methods and requirements for aluminium conductor cables
$68.00 ISO 7588-1:1998 Road vehicles - Electrical/electronic switching devices - Part 1: Relays and flashers
$45.00 ISO 7588-2:1998 Road vehicles - Electrical/electronic switching devices - Part 2: Electronic devices
$45.00 ISO 7588-3:1998 Road vehicles - Electrical/electronic switching devices - Part 3: Microrelays
$68.00 ISO 7637-1:2015 Road vehicles - Electrical disturbances from conduction and coupling - Part 1: Definitions and general considerations
$51.00 ISO 7637-1:2002 Road vehicles - Electrical disturbances from conduction and coupling - Part 1: Definitions and general considerations
$22.00 ISO 7637-1/Amd1:2008 Road vehicles - Electrical disturbance by conduction and coupling - Part 1: Passenger cars and light commercial vehicles with nominal 12 V supply voltage - Electrical transient conduction along supply lines only - Amendment 1
$185.00 ISO 7637-2:2011 Road vehicles - Electrical disturbances from conduction and coupling - Part 2: Electrical transient conduction along supply lines only
$138.00 ISO 7637-3:2016 Road vehicles - Electrical disturbances from conduction and coupling - Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines
$149.00 ISO 7637-3:2007 Road vehicles - Electrical disturbances from conduction and coupling - Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines
$185.00 ISO/TR 7637-5:2016 Road vehicles - Electrical disturbances from conduction and coupling - Part 5: Enhanced definitions and verification methods for harmonization of pulse generators according to ISO 7637
$68.00 ISO 7638-1:2003 Road vehicles - Connectors for the electrical connection of towing and towed vehicles - Part 1: Connectors for braking systems and running gear of vehicles with 24 V nominal supply voltage
$68.00 ISO 7638-2:2003 Road vehicles - Connectors for the electrical connection of towing and towed vehicles - Part 2: Connectors for braking systems and running gear of vehicles with 12 V nominal supply voltage
$45.00 ISO 8092-1:1996 Road vehicles - Connections for on-board electrical wiring harnesses - Part 1: Tabs for single-pole connections - Dimensions and specific requirements
$162.00 ISO 8092-2:2005 Road vehicles - Connections for on-board electrical wiring harnesses - Part 2: Definitions, test methods and general performance requirements
$45.00 ISO 8092-3:1996 Road vehicles - Connections for on-board electrical wiring harnesses - Part 3: Tabs for multi-pole connections - Dimensions and specific requirements
$45.00 ISO 8092-4:1997 Road vehicles - Connections for on-board electrical wiring harnesses - Part 4: Pins for single- and multi-pole connections - Dimensions and specific requirements
$68.00 ISO 8820-1:2014 Road vehicles - Fuse-links - Part 1: Definitions and general test requirements
$88.00 ISO 8820-1:2008 Road vehicles - Fuse-links - Part 1: Definitions and general test requirements
$68.00 ISO 8820-10:2015 Road vehicles - Fuse-links - Part 10: Fuse-links with tabs Type L (high current miniature)
$103.00 ISO 8820-2:2014 Road vehicles - Fuse-links - Part 2: User guidelines
$103.00 ISO 8820-3:2015 Road vehicles - Fuse-links - Part 3: Fuse-links with tabs (blade type) Type C (medium), Type E (high current) and Type F (miniature)
$123.00 ISO 8820-3:2010 Road vehicles - Fuse-links - Part 3: Fuse-links with tabs (blade type) Type C (medium), Type E (high current) and Type F (miniature)
$103.00 ISO 8820-4:2016 Road vehicles - Fuse-links - Part 4: Fuse-links with female contacts (type A) and bolt-in contacts (type B) and their test fixtures
$123.00 ISO 8820-4:2010 Road vehicles - Fuse-links - Part 4: Fuse-links with female contacts (type A) and bolt-in contacts (type B) and their test fixtures
$103.00 ISO 8820-5:2015 Road vehicles - Fuse-links - Part 5: Fuse-links with axial terminals (Strip fuse-links) Types SF 30 and SF 51 and test fixtures
$123.00 ISO 8820-5:2007 Road vehicles - Fuse-links - Part 5: Fuse-links with axial terminals (Strip fuse-links) Types SF 30 and SF 51 and test fixtures
$68.00 ISO 8820-6:2007 Road vehicles - Fuse-links - Part 6: Single-bolt fuse-links
$123.00 ISO 8820-7:2007 Road vehicles - Fuse-links - Part 7: Fuse-links with tabs (Type G) with rated voltage of 450 V
$68.00 ISO 8820-8:2012 Road vehicles - Fuse-links - Part 8: Fuse-links with bolt-in contacts (Type H and J) with rated voltage of 450 V
$68.00 ISO 8820-9:2014 Road vehicles - Fuse-links - Part 9: Fuse-links with shortened tabs (Type K)
$232.00 ISO/PAS 19451-1:2016 Application of ISO 26262:2011-2012 to semiconductors - Part 1: Application of concepts
$68.00 ISO/PAS 19451-2:2016 Application of ISO 26262:2011-2012 to semiconductors - Part 2: Application of hardware qualification
$29.00 JIS D 5813:1994 Door switches for automobiles