JIS B 2401-3:2012 - $68.00   BUY NOW

O-rings -- Part 3: Quality acceptance criteria

JIS B 2401-3:2012 Publication Description:

--- Abstract Source: JIS B 2401-3:2012 ---

Refers to carbon steel and low alloy high tensile steel covered electrodes in the sizes 3,15 to 6,3 mm. For the practical use of ISO 2401, the precision of measurement specified is sufficient because of the inherent variation in characteristics of individual electrodes.

International Classification for Standards (ICS)

ICS Classification Field ICS Field Sub-Group and Number
ICS-23-Fluid ICS Filters Seals/Fluid Contamination (23.100.60)
ICS-83-Rubber ICS Seals (83.140.50)

ICS Related Standards

Cart Document Number Document Title
$68.00 ISO/TR 10949:2002 Hydraulic fluid power - Component cleanliness - Guidelines for achieving and controlling cleanliness of components from manufacture to installation
$45.00 ISO 11170:2013 Hydraulic fluid power - Sequence of tests for verifying performance characteristics of filter elements
$209.00 ISO 11171:2016 Hydraulic fluid power - Calibration of automatic particle counters for liquids
$200.00 ISO 11171:2010 Hydraulic fluid power - Calibration of automatic particle counters for liquids
$162.00 ISO 11500:2008 Hydraulic fluid power - Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle
$162.00 ISO 11943:1999 Hydraulic fluid power -- On-line automatic particle-counting systems for liquids -- Methods of calibration and validation
$68.00 ISO 12500-1:2007 Filters for compressed air - Test methods - Part 1: Oil aerosols
$68.00 ISO 12500-2:2007 Filters for compressed air - Test methods - Part 2: Oil vapours
$103.00 ISO 12500-3:2009 Filters for compressed air - Test methods - Part 3: Particulates
$68.00 ISO 12829:2016 Hydraulic spin-on filters with finite lives - Method for verifying the rated fatigue life and the rated static burst pressure of the pressure-containing envelope
$162.00 ISO/TR 15640:2011 Hydraulic fluid power contamination control - General principles and guidelines for selection and application of hydraulic filters
$103.00 ISO/TR 16144:2002 Hydraulic fluid power - Calibration of liquid automatic particle counters - Procedures used to certify the standard reference material SRM 2806
$103.00 ISO/TR 16386:2014 Impact of changes in ISO fluid power particle counting - Contamination control and filter test standards
$99.00 ISO/TR 16386:1999 Impact of changes in ISO fluid power particle counting -- Contamination control and filter test standards
$68.00 ISO 16431:2012 Hydraulic fluid power - System clean-up procedures and verification of cleanliness of assembled systems
$103.00 ISO 16589-1:2011 Rotary shaft lip-type seals incorporating thermoplastic sealing elements - Part 1: Nominal dimensions and tolerances
$162.00 ISO 16589-2:2011 Rotary shaft lip-type seals incorporating thermoplastic sealing elements - Part 2: Vocabulary
$68.00 ISO 16589-3:2011 Rotary shaft lip-type seals incorporating thermoplastic sealing elements - Part 3: Storage, handling and installation
$103.00 ISO 16589-4:2011 Rotary shaft lip-type seals incorporating thermoplastic sealing elements - Part 4: Performance test procedures
$103.00 ISO 16589-5:2011 Rotary shaft lip-type seals incorporating thermoplastic sealing elements - Part 5: Identification of visual imperfections
$68.00 ISO 16860:2005 Hydraulic fluid power - Filters - Test method for differential pressure devices
$185.00 ISO 16889:2008 Hydraulic fluid power - Filters - Multi-pass method for evaluating filtration performance of a filter element
$103.00 ISO 16908:2014 Hydraulic filter element test methods - Thermal conditioning and cold start-up simulation
$185.00 ISO 18413:2015 Hydraulic fluid power - Cleanliness of components - Inspection document and principles related to contaminant extraction and analysis, and data reporting
$173.00 ISO 18413:2002 Hydraulic fluid power -- Cleanliness of parts and components -- Inspection document and principles related to contaminant collection, analysis and data reporting
$138.00 ISO 21018-1:2008 Hydraulic fluid power - Monitoring the level of particulate contamination of the fluid - Part 1: General principles
$103.00 ISO 21018-3:2008 Hydraulic fluid power - Monitoring the level of particulate contamination of the fluid - Part 3: Use of the filter blockage technique
$68.00 ISO 21018-4:2016 Hydraulic fluid power - Monitoring the level of particulate contamination in the fluid - Part 4: Use of the light extinction technique
$68.00 ISO 23181:2007 Hydraulic fluid power - Filter elements - Determination of resistance to flow fatigue using high viscosity fluid
$68.00 ISO 27407:2010 Hydraulic fluid power - Marking of performance characteristics on hydraulic filters
$68.00 ISO 2941:2009 Hydraulic fluid power - Filter elements - Verification of collapse/burst pressure rating
$68.00 ISO 2942:2004 Hydraulic fluid power - Filter elements - Verification of fabrication integrity and determination of the first bubble point
$45.00 ISO 2943:1998 Hydraulic fluid power -- Filter elements -- Verification of material compatibility with fluids
$185.00 ISO 3601-1:2012 Fluid power systems - O-rings - Part 1: Inside diameters, cross-sections, tolerances and designation codes
$209.00 ISO 3601-2:2016 Fluid power systems - O-rings - Part 2: Housing dimensions for general applications
$200.00 ISO 3601-2:2008 Fluid power systems - O-rings - Part 2: Housing dimensions for general applications
$68.00 ISO 3601-3:2005 Fluid power systems - O-rings - Part 3: Quality acceptance criteria
$68.00 ISO 3601-4:2008 Fluid power systems - O-rings - Part 4: Anti-extrusion rings (back-up rings)
$103.00 ISO 3601-5:2015 Fluid power systems - O-rings - Part 5: Specification of elastomeric materials for industrial applications
$51.00 ISO 3601-5:2002 Fluid power systems - O-rings - Part 5: Suitability of elastomeric materials for industrial applications
$45.00 ISO 3723:2015 Hydraulic fluid power - Filter elements - Method for end load test
$51.00 ISO 3723:1976 Hydraulic fluid power - Filter elements - Method for end load test
$68.00 ISO 3724:2007 Hydraulic fluid power - Filter elements - Determination of resistance to flow fatigue using particulate contaminant
$88.00 ISO 3938:1986 Hydraulic fluid power -- Contamination analysis -- Method for reporting analysis data
$68.00 ISO 3968:2001 Hydraulic fluid power - Filters - Evaluation of differential pressure versus flow characteristics
$45.00 ISO 4021:1992 Hydraulic fluid power -- Particulate contamination analysis -- Extraction of fluid samples from lines of an operating system
$45.00 ISO 4405:1991 Hydraulic fluid power -- Fluid contamination -- Determination of particulate contamination by the gravimetric method
$68.00 ISO 4406:1999 Hydraulic fluid power -- Fluids -- Method for coding the level of contamination by solid particles
$103.00 ISO 4407:2002 Hydraulic fluid power - Fluid contamination - Determination of particulate contamination by the counting method using an optical microscope
$68.00 ISO 5782-1:1997 Pneumatic fluid power -- Compressed-air filters -- Part 1: Main characteristics to be included in suppliers literature and product marking requirements'
$45.00 ISO 5782-2:1997 Pneumatic fluid power - Compressed-air filters - Part 2: Test methods to determine the main characteristics to be included in suppliers literature'
$103.00 ISO 6194-1:2007 Rotary shaft lip-type seals incorporating elastomeric sealing elements - Part 1: Nominal dimensions and tolerances
$185.00 ISO 6194-2:2009 Rotary shaft lip-type seals incorporating elastomeric sealing elements - Part 2: Vocabulary
$68.00 ISO 6194-3:2009 Rotary shaft lip-type seals incorporating elastomeric sealing elements - Part 3: Storage, handling and installation
$103.00 ISO 6194-4:2009 Rotary shaft lip-type seals incorporating elastomeric sealing elements - Part 4: Performance test procedures
$68.00 ISO 6194-5:2008 Rotary-shaft lip-type seals incorporating elastomeric sealing elements - Part 5: Identification of visual imperfections
$138.00 ISO 7986:1997 Hydraulic fluid power - Sealing devices - Standard test methods to assess the performance of seals used in oil hydraulic reciprocating applications
$107.00 JIS B 2401-1:2012 O-rings -- Part 1: O-rings
$68.00 JIS B 2402-1:2013 Rotary shaft lip-type seals incorporating elastomeric sealing elements -- Part 1: Nominal dimensions and tolerances
$87.00 JIS B 2402-4:2013 Rotary shaft lip-type seals incorporating elastomeric sealing elements -- Part 4: Performance test procedures
$68.00 JIS B 2402-5:2013 Rotary shaft lip-type seals incorporating elastomeric sealing elements -- Part 5: Identification of visual imperfections
$103.00 ISO 3968:2017 Hydraulic fluid power - Filters - Evaluation of differential pressure versus flow
$45.00 ISO 4406:2017 Hydraulic fluid power - Fluids - Method for coding the level of contamination by solid particles
$103.00 ISO 12669:2017 Hydraulic fluid power - Method for determining the required cleanliness level (RCL) of a system
$103.00 ISO 18237:2017 Hydraulic fluid power - Method for evaluating water separation performance of dehydrators
$68.00 ISO 5782-1:2017 Pneumatic fluid power - Compressed air filters - Part 1: Main characteristics to be included in suppliers literature and product-marking requirements
$68.00 ISO 16010:2005 Elastomeric seals - Material requirements for seals used in pipes and fittings carrying gaseous fuels and hydrocarbon fluids
$103.00 ISO 16589-1:2011 Rotary shaft lip-type seals incorporating thermoplastic sealing elements - Part 1: Nominal dimensions and tolerances
$68.00 ISO 16589-3:2011 Rotary shaft lip-type seals incorporating thermoplastic sealing elements - Part 3: Storage, handling and installation
$103.00 ISO 16589-4:2011 Rotary shaft lip-type seals incorporating thermoplastic sealing elements - Part 4: Performance test procedures
$103.00 ISO 16589-5:2011 Rotary shaft lip-type seals incorporating thermoplastic sealing elements - Part 5: Identification of visual imperfections
$45.00 ISO 1749:1973 Aircraft - Elastomeric sealing rings - Packaging and identification
$68.00 ISO 23711:2003 Elastomeric seals - Requirements for materials for pipe joint seals used in water and drainage applications - Thermoplastic elastomers
$68.00 ISO 27996:2009 Aerospace fluid systems - Elastomer seals - Storage and shelf life
$185.00 ISO 3601-1:2012 Fluid power systems - O-rings - Part 1: Inside diameters, cross-sections, tolerances and designation codes
$209.00 ISO 3601-2:2016 Fluid power systems - O-rings - Part 2: Housing dimensions for general applications
$200.00 ISO 3601-2:2008 Fluid power systems - O-rings - Part 2: Housing dimensions for general applications
$68.00 ISO 3601-3:2005 Fluid power systems - O-rings - Part 3: Quality acceptance criteria
$68.00 ISO 3601-4:2008 Fluid power systems - O-rings - Part 4: Anti-extrusion rings (back-up rings)
$103.00 ISO 3601-5:2015 Fluid power systems - O-rings - Part 5: Specification of elastomeric materials for industrial applications
$51.00 ISO 3601-5:2002 Fluid power systems - O-rings - Part 5: Suitability of elastomeric materials for industrial applications
$138.00 ISO 3934:2002 Rubber, vulcanized and thermoplastic - Preformed gaskets used in buildings - Classification, specifications and test methods
$45.00 ISO 3939:1977 Fluid power systems and components - Multiple lip packing sets - Methods for measuring stack heights
$68.00 ISO 4633:2015 Rubber seals - Joint rings for water supply, drainage and sewerage pipelines - Specification for materials
$88.00 ISO 4633:2002 Rubber seals - Joint rings for water supply, drainage and sewerage pipelines - Specification for materials
$68.00 ISO 4635:2011 Rubber, vulcanized - Preformed joint seals for use between concrete paving sections of highways - Specification
$68.00 ISO 4927:2005 Road vehicles - Elastomeric boots for cylinders for drum type hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 120 degrees C max.)
$103.00 ISO 4928:2006 Road vehicles - Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (Service temperature 120 degrees C max.)
$68.00 ISO 4930:2006 Road vehicles - Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 150 degrees C max.)
$68.00 ISO 5892:2013 Rubber building gaskets - Materials for preformed solid vulcanized structural gaskets - Specification
$68.00 ISO 6117:2005 Road vehicles - Elastomeric boots for drum-type, hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (service temperature 100 degrees C max.)
$103.00 ISO 6118:2006 Road vehicles - Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (service temperature 70 degrees C max.)
$68.00 ISO 6119:2006 Road vehicles - Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 120 degrees C max.)
$103.00 ISO 6194-1:2007 Rotary shaft lip-type seals incorporating elastomeric sealing elements - Part 1: Nominal dimensions and tolerances
$68.00 ISO 6194-3:2009 Rotary shaft lip-type seals incorporating elastomeric sealing elements - Part 3: Storage, handling and installation
$103.00 ISO 6194-4:2009 Rotary shaft lip-type seals incorporating elastomeric sealing elements - Part 4: Performance test procedures
$68.00 ISO 6194-5:2008 Rotary-shaft lip-type seals incorporating elastomeric sealing elements - Part 5: Identification of visual imperfections
$45.00 ISO 6447:1983 Rubber seals - Joint rings used for gas supply pipes and fittings - Specification for material
$45.00 ISO 6448:1985 Rubber seals - Joint rings used for petroleum product supply pipes and fittings - Specification for material
$45.00 ISO 7630:1985 Road vehicles - Elastomeric O-rings for hydraulic drum brake wheel cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.)
$68.00 ISO 7631:1985 Road vehicles - Elastomeric cups and seals for cylinders for hydraulic braking systems using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.)
$45.00 ISO 7632:1985 Road vehicles - Elastomeric seals for hydraulic disc brake cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.)
$45.00 ISO 7633:1985 Road vehicles - Elastomeric boots for drum type hydraulic brake wheel cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.)
$138.00 ISO 7986:1997 Hydraulic fluid power - Sealing devices - Standard test methods to assess the performance of seals used in oil hydraulic reciprocating applications
$68.00 ISO 9553:1997 Solar energy - Methods of testing preformed rubber seals and sealing compounds used in collectors
$68.00 ISO 9631:2003 Rubber seals - Joint rings for pipelines for hot-water supply up to 110 degrees C - Specification for the material
$107.00 JIS A 5756:2013 Performed gaskets used in buildings -- Classification, specifications and test methods
$107.00 JIS B 2401-1:2012 O-rings -- Part 1: O-rings
$68.00 JIS B 2402-1:2013 Rotary shaft lip-type seals incorporating elastomeric sealing elements -- Part 1: Nominal dimensions and tolerances
$87.00 JIS B 2402-4:2013 Rotary shaft lip-type seals incorporating elastomeric sealing elements -- Part 4: Performance test procedures
$68.00 JIS B 2402-5:2013 Rotary shaft lip-type seals incorporating elastomeric sealing elements -- Part 5: Identification of visual imperfections
$68.00 JIS B 2403:2009 V packings
$107.00 JIS D 2605:2005 Automotive parts -- Rubber cups for hydraulic braking cylinders using a non-petroleum base hydraulic brake fluid
$107.00 JIS D 2608:2012 Automotive parts -- Rubber boots for hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid