JIS B 0659-1:2002 - $78.00   BUY NOW

Geometrical Product Specifications (GPS) -- Surface texture: Profile method; Measurement standards -- Part 1: Material measures

JIS B 0659-1:2002 Publication Description:

--- Abstract Source: JIS B 0659-1:2002 ---

ISO 659:2009 specifies a reference method for the determination of the hexane extract (or light petroleum extract), called the “oil content”, of oilseeds used as industrial raw materials. The procedure for sunflower seed is different from those for other seeds as it includes an additional moisture content determination after the seed has been ground to prepare the test sample.

The method has been tested on rapeseed, soya beans and sunflower seed. This does not, however, preclude its applicability to other commercial seeds.

If required, the pure seeds and the impurities can be analysed separately. In the case of groundnuts, the pure seeds, the total fines, the non-oleaginous impurities and the oleaginous impurities can be analysed separately.

International Classification for Standards (ICS)

ICS Classification Field ICS Field Sub-Group and Number
ICS-17-Metrology ICS Properties-Surfaces (17.040.20)
ICS-17-Metrology ICS Measuring Instruments (17.040.30)

ICS Related Standards

Cart Document Number Document Title
$103.00 ISO 12085:1996 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Motif parameters
$103.00 ISO 12180-1:2011 Geometrical product specifications (GPS) - Cylindricity - Part 1: Vocabulary and parameters of cylindrical form
$68.00 ISO 12180-2:2011 Geometrical product specifications (GPS) - Cylindricity - Part 2: Specification operators
$103.00 ISO 12181-1:2011 Geometrical product specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness
$68.00 ISO 12181-2:2011 Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators
$68.00 ISO 12780-1:2011 Geometrical product specifications (GPS) - Straightness - Part 1: Vocabulary and parameters of straightness
$68.00 ISO 12780-2:2011 Geometrical product specifications (GPS) - Straightness - Part 2: Specification operators
$68.00 ISO 12781-1:2011 Geometrical product specifications (GPS) - Flatness - Part 1: Vocabulary and parameters of flatness
$103.00 ISO 12781-2:2011 Geometrical product specifications (GPS) - Flatness - Part 2: Specification operators
$185.00 ISO 1302:2002 Geometrical Product Specifications (GPS) - Indication of surface texture in technical product documentation
$45.00 ISO 13565-1:1996 Geometrical Product Specifications (GPS) - Surface texture: Profile method; Surfaces having stratified functional properties - Part 1: Filtering and general measurement conditions
$45.00 ISO 13565-2:1996 Geometrical Product Specifications (GPS) - Surface texture: Profile method; Surfaces having stratified functional properties - Part 2: Height characterization using the linear material ratio curve
$138.00 ISO 13565-3:1998 Geometrical Product Specifications (GPS) - Surface texture: Profile method; Surfaces having stratified functional properties - Part 3: Height characterization using the material probability curve
$138.00 ISO 16610-1:2015 Geometrical product specifications (GPS) - Filtration - Part 1: Overview and basic concepts
$149.00 ISO/TS 16610-1:2006 Geometrical product specifications (GPS) - Filtration - Part 1: Overview and basic concepts
$103.00 ISO 16610-20:2015 Geometrical product specifications (GPS) - Filtration - Part 20: Linear profile filters: Basic concepts
$123.00 ISO/TS 16610-20:2006 Geometrical product specifications (GPS) - Filtration - Part 20: Linear profile filters: Basic concepts
$138.00 ISO 16610-21:2011 Geometrical product specifications (GPS) - Filtration - Part 21: Linear profile filters: Gaussian filters
$103.00 ISO 16610-22:2015 Geometrical product specifications (GPS) - Filtration - Part 22: Linear profile filters: Spline filters
$123.00 ISO/TS 16610-22:2006 Geometrical product specifications (GPS) - Filtration - Part 22: Linear profile filters: Spline filters
$138.00 ISO 16610-28:2016 Geometrical product specifications (GPS) - Filtration - Part 28: Profile filters: End effects
$123.00 ISO/TS 16610-28:2010 Geometrical product specifications (GPS) - Filtration - Part 28: Profile filters: End effects
$103.00 ISO 16610-29:2015 Geometrical product specifications (GPS) - Filtration - Part 29: Linear profile filters: Spline wavelets
$123.00 ISO/TS 16610-29:2006 Geometrical product specifications (GPS) - Filtration - Part 29: Linear profile filters: Spline wavelets
$103.00 ISO 16610-30:2015 Geometrical product specifications (GPS) - Filtration - Part 30: Robust profile filters: Basic concepts
$123.00 ISO/TS 16610-30:2009 Geometrical product specifications (GPS) - Filtration - Part 30: Robust profile filters: Basic concepts
$68.00 ISO 16610-31:2016 Geometrical product specifications (GPS) - Filtration - Part 31: Robust profile filters: Gaussian regression filters
$88.00 ISO/TS 16610-31:2010 Geometrical product specifications (GPS) - Filtration - Part 31: Robust profile filters: Gaussian regression filters
$68.00 ISO/TS 16610-32:2009 Geometrical product specifications (GPS) - Filtration - Part 32: Robust profile filters: Spline filters
$103.00 ISO 16610-40:2015 Geometrical product specifications (GPS) - Filtration - Part 40: Morphological profile filters: Basic concepts
$123.00 ISO/TS 16610-40:2006 Geometrical product specifications (GPS) - Filtration - Part 40: Morphological profile filters: Basic concepts
$103.00 ISO 16610-41:2015 Geometrical product specifications (GPS) - Filtration - Part 41: Morphological profile filters: Disk and horizontal line-segment filters
$123.00 ISO/TS 16610-41:2006 Geometrical product specifications (GPS) - Filtration - Part 41: Morphological profile filters: Disk and horizontal line-segment filters
$103.00 ISO 16610-49:2015 Geometrical product specifications (GPS) - Filtration - Part 49: Morphological profile filters: Scale space techniques
$123.00 ISO/TS 16610-49:2006 Geometrical product specifications (GPS) - Filtration - Part 49: Morphological profile filters: Scale space techniques
$103.00 ISO 16610-60:2015 Geometrical product specification (GPS) - Filtration - Part 60: Linear areal filters - Basic concepts
$103.00 ISO 16610-61:2015 Geometrical product specification (GPS) - Filtration - Part 61: Linear areal filters - Gaussian filters
$138.00 ISO 16610-71:2014 Geometrical product specifications (GPS) - Filtration - Part 71: Robust areal filters: Gaussian regression filters
$138.00 ISO 16610-85:2013 Geometrical product specifications (GPS) - Filtration - Part 85: Morphological areal filters: Segmentation
$138.00 ISO 25178-1:2016 Geometrical product specifications (GPS) - Surface texture: Areal - Part 1: Indication of surface texture
$185.00 ISO 25178-2:2012 Geometrical product specifications (GPS) - Surface texture: Areal - Part 2: Terms, definitions and surface texture parameters
$103.00 ISO 25178-3:2012 Geometrical product specifications (GPS) - Surface texture: Areal - Part 3: Specification operators
$68.00 ISO 25178-6:2010 Geometrical product specifications (GPS) - Surface texture: Areal - Part 6: Classification of methods for measuring surface texture
$103.00 ISO 25178-601:2010 Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments
$162.00 ISO 25178-602:2010 Geometrical product specifications (GPS) - Surface texture: Areal - Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments
$162.00 ISO 25178-603:2013 Geometrical product specifications (GPS) - Surface texture: Areal - Part 603: Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments
$185.00 ISO 25178-604:2013 Geometrical product specifications (GPS) - Surface texture: Areal - Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments
$162.00 ISO 25178-605:2014 Geometrical product specifications (GPS) - Surface texture: Areal - Part 605: Nominal characteristics of non-contact (point autofocus probe) instruments
$162.00 ISO 25178-606:2015 Geometrical product specification (GPS) - Surface texture: Areal - Part 606: Nominal characteristics of non-contact (focus variation) instruments
$162.00 ISO 25178-70:2014 Geometrical product specification (GPS) - Surface texture: Areal - Part 70: Material measures
$138.00 ISO 25178-701:2010 Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments
$68.00 ISO 25178-71:2012 Geometrical product specifications (GPS) - Surface texture: Areal - Part 71: Software measurement standards
$0.00 ISO 4287/COR1:1998 Technical Corrigendum 1 to ISO 4287:1997
$138.00 ISO 4287:1997 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters
$19.00 ISO 4287/Amd1:2009 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters - Amendment 1: Peak count number
$68.00 ISO 4288:1996 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Rules and procedures for the assessment of surface texture
$103.00 ISO 4291:1985 Methods for the assessement of departure from roundness - Measurement of variations in radius
$138.00 ISO 8785:1998 Geometrical Product Specification (GPS) - Surface imperfections - Terms, definitions and parameters
$194.00 JIS B 0031:2003 Geometrical Product Specifications (GPS) -- Indication of surface texture in technical product documentation
$136.00 JIS B 0601:2013 Geometrical Product Specifications (GPS) -- Surface texture: Profile method -- Terms, definitions and surface texture parameters
$29.00 JIS B 0610:2001 Geometrical Product Specification (GPS) -- Surface texture: Profile method -- Definitions and designation of rolling circle waviness
$107.00 JIS B 0631:2000 Geometrical Product Specification (GPS) -- Surface texture: Profile method -- Motif parameters
$29.00 JIS B 0632:2001 Geometrical Product Specification (GPS) -- Surface texture: Profile method -- Metrological characteristics of phase correct filters
$68.00 JIS B 0633:2001 Geometrical Product Specification (GPS) -- Surface texture: Profile method -- Rules and procedures for the assessment of surface texture
$107.00 JIS B 0651:2001 Geometrical Product Specification (GPS) -- Surface texture: Profile method -- Nominal characteristics of contact (stylus) instruments
$78.00 JIS B 0670:2002 Geometrical Product Specifications (GPS) -- Surface texture: Profile method -- Calibration of contact (stylus) instruments
$49.00 JIS B 0671-1:2002 Geometrical Product Specifications (GPS) -- Surface texture: Profile method; Surfaces having stratified functional properties -- Part 1: Filtering and general measurement conditions
$49.00 JIS B 0671-2:2002 Geometrical Product Specifications (GPS) -- Surface texture: Profile method; Surfaces having stratified functional properties -- Part 2: Height characterization using the linear material ratio curve
$138.00 ISO 25178-72:2017 Geometrical product specifications (GPS) - Surface texture: Areal - Part 72: XML file format x3p
$68.00 ISO 25178-71:2017 Geometrical product specifications (GPS) - Surface texture: Areal - Part 71: Software measurement standards
$185.00 ISO 10360-1:2000 Geometrical Product Specifications (GPS) -- Acceptance and reverification tests for coordinate measuring machines (CMM) -- Part 1: Vocabulary
$185.00 ISO 10360-10:2016 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 10: Laser trackers for measuring point-to-point distances
$185.00 ISO 10360-12:2016 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 12: Articulated arm coordinate measurement machines (CMM)
$162.00 ISO 10360-2:2009 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2: CMMs used for measuring linear dimensions
$68.00 ISO 10360-3:2000 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 3: CMMs with the axis of a rotary table as the fourth axis
$68.00 ISO 10360-4:2000 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 4: CMMs used in scanning measuring mode
$162.00 ISO 10360-5:2010 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 5: CMMs using single and multiple stylus contacting probing systems
$138.00 ISO 10360-6:2001 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features
$185.00 ISO 10360-7:2011 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7: CMMs equipped with imaging probing systems
$209.00 ISO 10360-8:2013 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 8: CMMs with optical distance sensors
$103.00 ISO 10360-9:2013 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 9: CMMs with multiple probing systems
$103.00 ISO 12179:2000 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments
$68.00 ISO 13102:2012 Geometrical product specifications (GPS) - Dimensional measuring equipment: Electronic digital-indicator gauge - Design and metrological characteristics
$138.00 ISO 13225:2012 Geometrical product specifications (GPS) - Dimensional measuring equipment; Height gauges - Design and metrological characteristics
$138.00 ISO 13385-1:2011 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Callipers; Design and metrological characteristics
$103.00 ISO 13385-2:2011 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Calliper depth gauges; Design and metrological characteristics
$185.00 ISO 14978:2006 Geometrical product specifications (GPS) - General concepts and requirements for GPS measuring equipment
$162.00 ISO 1502:1996 ISO general-purpose metric screw threads - Gauges and gauging
$103.00 ISO/TS 15530-1:2013 Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 1: Overview and metrological characteristics
$103.00 ISO 15530-3:2011 Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or measurement standards
$138.00 ISO/TS 15530-4:2008 Geometrical Product Specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 4: Evaluating task-specific measurement uncertainty using simulation
$45.00 ISO 16239:2013 Metric series wires for measuring screw threads
$103.00 ISO 3274:1996 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Nominal characteristics of contact (stylus) instruments
$103.00 ISO 3611:2010 Geometrical product specifications (GPS) - Dimensional measuring equipment: Micrometers for external measurements - Design and metrological characteristics
$103.00 ISO 3650:1998 Geometrical Product Specifications (GPS) - Length standards - Gauge blocks
$103.00 ISO 463:2006 Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges
$103.00 ISO 5436-1:2000 Geometrical Product Specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 1: Material measures
$103.00 ISO 5436-2:2012 Geometrical product specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 2: Software measurement standards
$45.00 ISO 7863:1984 Height setting micrometers and riser blocks
$68.00 ISO 8512-1:1990 Surface plates - Part 1: Cast iron
$68.00 ISO 8512-2:1990 Surface plates - Part 2: Granite
$138.00 ISO 9493:2010 Geometrical product specifications (GPS) - Dimensional measuring equipment: Dial test indicators (lever type) - Design and metrological characteristics
$174.00 JIS B 0251:2008 Limit gauges for metric screw threads
$107.00 JIS B 0651:2001 Geometrical Product Specification (GPS) -- Surface texture: Profile method -- Nominal characteristics of contact (stylus) instruments
$78.00 JIS B 0670:2002 Geometrical Product Specifications (GPS) -- Surface texture: Profile method -- Calibration of contact (stylus) instruments
$49.00 JIS B 0671-1:2002 Geometrical Product Specifications (GPS) -- Surface texture: Profile method; Surfaces having stratified functional properties -- Part 1: Filtering and general measurement conditions
$49.00 JIS B 0671-2:2002 Geometrical Product Specifications (GPS) -- Surface texture: Profile method; Surfaces having stratified functional properties -- Part 2: Height characterization using the linear material ratio curve
$155.00 JIS B 7440-2:2013 Geometrical product specifications (GPS) -- Acceptance and reverification tests for coordinate measuring machines (CMM) -- Part 2: CMMs used for measuring linear dimensions
$68.00 JIS B 7440-3:2003 Geometrical Product Specifications (GPS) -- Acceptance and reverification tests for coordinate measuring machines (CMM) -- Part 3: CMM's with the axis of a rotary table as the fourth axis
$68.00 JIS B 7451:1997 Instruments for the assessment of departure from roundness -- Measurement of variations in radius
$107.00 JIS B 7503:2011 Mechanical dial gauges
$68.00 JIS B 7506:2004 Gauge blocks