ISO/PAS 19891-1:2016 - $45.00   BUY NOW

Ships and marine technology - Specifications for gas detectors intended for use on board ships - Part 1: Portable gas detectors for atmosphere testing of enclosed spaces

ISO/PAS 19891-1:2016 Publication Description:

ISO/PAS 19891:2016 provides specifications in performance, gases to be measured, sensitivities, indications, alarm levels, protection against shock, temperature and water ingress, and testing requirements of portable gas detectors used for atmosphere testing of enclosed spaces on board ships prior to entry into those spaces.

ISO/PAS 19891:2016 specifies suitable portable gas detectors for compliance with SOLAS regulation XI-1/7 "Atmosphere testing instrument for enclosed spaces", and can be used for deciding whether portable gas detectors available on the market are suitable for compliance with these SOLAS requirements.

NOTE 1 SOLAS regulation XI-1/7 requires appropriate portable atmosphere testing instrument or instruments to be carried on board ships by 1 July 2016. The SOLAS regulation states that, as a minimum, the appropriate portable atmosphere testing instrument or instruments be capable of measuring concentrations of oxygen, flammable gases or vapours, hydrogen sulphide and carbon monoxide prior to entry into enclosed spaces.

For the purpose of measurement of concentrations of flammable gases or vapours, this part of ISO/PAS 19891 specifies the flammable gas as either "methane" or "propane and butane", and requires clear marking of types of flammable gases which can be measured by the portable gas detectors. For an optimal use of ISO/PAS 19891, it should be noted that flammable vapours/gases which are not marked, cannot be measured, or detected by the portable gas detector.

NOTE 2 Iso-butane can be used as calibration gas of portable gas detectors measuring propane and butane.

ISO/PAS 19891:2016 does not give any indication of the toxicity of the flammable gases.

International Classification for Standards (ICS)

ICS Classification Field ICS Field Sub-Group and Number
ICS-13-Environment ICS Fire Protection (13.220.20)
ICS-47-Shipbuilding ICS ShipBuilding-General Standards (47.020.01)

ICS Related Standards

Cart Document Number Document Title
$209.00 ISO 12239:2010 Smoke alarms using scattered light, transmitted light or ionization
$138.00 ISO 14186:2013 Air cargo - Fire containment covers - Design, performance and testing requirements
$185.00 ISO 16437:2012 Ships and marine technology - Lifesaving and fire protection - Atmospheric oil mist detectors for ships
$232.00 ISO/TR 17755:2014 Fire safety - Overview of national fire statistics practices
$185.00 ISO 21927-1:2008 Smoke and heat control systems - Part 1: Specification for smoke barriers
$162.00 ISO 21927-10:2011 Smoke and heat control systems - Part 10: Specification for power output devices
$185.00 ISO 21927-2:2006 Smoke and heat control systems - Part 2: Specification for natural smoke and heat exhaust ventilators
$19.00 ISO 21927-2/Amd1:2010 Smoke and heat control systems - Part 2: Specification for natural smoke and heat exhaust ventilators - Amendment 1
$162.00 ISO 21927-3:2006 Smoke and heat control systems - Part 3: Specification for powered smoke and heat exhaust ventilators
$19.00 ISO 21927-3/Amd1:2010 Smoke and heat control systems - Part 3: Specification for powered smoke and heat exhaust ventilators - Amendment 1
$209.00 ISO 21927-9:2012 Smoke and heat control systems - Part 9: Specification for control equipment
$68.00 ISO 5925-1:2007 Fire tests - Smoke-control door and shutter assemblies - Part 1: Ambient- and medium-temperature leakage tests
$19.00 ISO 5925-1:2007/Amd1:2015 - Amendment 1
$68.00 ISO/TR 5925-2:2006 Fire tests - Smoke-control door and shutter assemblies - Part 2: Commentary on test method and the applicability of test conditions and the use of test data in a smoke containment strategy
$209.00 ISO 6182-1:2014 Fire protection - Automatic sprinkler systems - Part 1: Requirements and test methods for sprinklers
$209.00 ISO 6182-10:2014 Fire protection - Automatic sprinkler systems - Part 10: Requirements and test methods for domestic sprinklers
$103.00 ISO 6182-11:2003 Fire protection - Automatic sprinkler systems - Part 11: Requirements and test methods for pipe hangers
$103.00 ISO 6182-12:2014 Fire protection - Automatic sprinkler systems - Part 12: Requirements and test methods for grooved-end components for steel pipe systems
$114.00 ISO 6182-12:2010 Fire protection - Automatic sprinkler systems - Part 12: Requirements and test methods for grooved-end components for steel pipe systems
$209.00 ISO 6182-13:2017 Fire protection - Automatic sprinkler systems - Part 13: Requirements and test methods for extended-coverage sprinklers
$138.00 ISO 6182-2:2012 Fire protection - Automatic sprinkler systems - Part 2: Requirements and test methods for wet alarm valves, retard chambers and water motor alarms
$138.00 ISO 6182-3:2012 Fire protection - Automatic sprinkler systems - Part 3: Requirements and test methods for dry pipe valves
$45.00 ISO 6182-4:1993 Fire protection - Automatic sprinkler systems - Part 4: Requirements and test methods for quick-opening devices
$138.00 ISO 6182-5:2012 Fire protection - Automatic sprinkler systems - Part 5: Requirements and test methods for deluge valves
$103.00 ISO 6182-6:2006 Fire protection - Automatic sprinkler systems - Part 6: Requirements and test methods for check valves
$185.00 ISO 6182-7:2004 Fire protection - Automatic sprinkler systems - Part 7: Requirements and test methods for early suppression fast response (ESFR) sprinklers
$138.00 ISO 6182-8:2006 Fire protection - Automatic sprinkler systems - Part 8: Requirements and test methods for pre-action dry alarm valves
$209.00 ISO 6182-9:2005 Fire protection - Automatic sprinkler system - Part 9: Requirements and test methods for water mist nozzles
$103.00 ISO 7240-1:2014 Fire detection and alarm systems - Part 1: General and definitions
$162.00 ISO 7240-10:2012 Fire detection and alarm systems - Part 10: Point-type flame detectors
$185.00 ISO 7240-11:2011 Fire detection and alarm systems - Part 11: Manual call points
$185.00 ISO 7240-12:2014 Fire detection and alarm systems - Part 12: Line type smoke detectors using a transmitted optical beam
$103.00 ISO 7240-13:2005 Fire detection and alarm systems - Part 13: Compatibility assessment of system components
$185.00 ISO 7240-14:2013 Fire detection and alarm systems - Part 14: Design, installation, commissioning and service of fire detection and fire alarm systems in and around buildings
$209.00 ISO 7240-15:2014 Fire detection and alarm systems - Part 15: Point-type fire detectors using smoke and heat sensors
$224.00 ISO 7240-15:2004 Fire detection and alarm systems - Part 15: Multisensor fire detectors
$185.00 ISO 7240-16:2007 Fire detection and alarm systems - Part 16: Sound system control and indicating equipment
$162.00 ISO 7240-17:2009 Fire detection and fire alarm systems - Part 17: Short-circuit isolators
$103.00 ISO 7240-18:2009 Fire detection and alarm systems - Part 18: Input/output devices
$162.00 ISO 7240-19:2007 Fire detection and alarm systems - Part 19: Design, installation, commissioning and service of sound systems for emergency purposes
$185.00 ISO 7240-2:2003 Fire detection and alarm systems -- Part 2: Control and indicating equipment
$209.00 ISO 7240-20:2010 Fire detection and alarm systems - Part 20: Aspirating smoke detectors
$138.00 ISO 7240-21:2005 Fire detection and alarm systems - Part 21: Routing equipment
$185.00 ISO 7240-22:2007 Fire detection and alarm systems - Part 22: Smoke-detection equipment for ducts
$185.00 ISO 7240-23:2013 Fire detection and alarm systems - Part 23: Visual alarm devices
$185.00 ISO 7240-24:2016 Fire detection and fire alarm systems - Part 24: Fire alarm loudspeakers
$200.00 ISO 7240-24:2010 Fire detection and fire alarm systems - Part 24: Sound-system loudspeakers
$22.00 ISO 7240-24:2010/Amd1:2013 - Amendment 1
$185.00 ISO 7240-25:2010 Fire detection and fire alarm systems - Part 25: Components using radio transmission paths
$209.00 ISO 7240-27:2009 Fire detection and alarm systems - Part 27: Point-type fire detectors using a scattered-light, transmitted-light or ionization smoke sensor, an electrochemical-cell carbon-monoxide sensor and a heat sensor
$162.00 ISO 7240-28:2014 Fire detection and alarm systems - Part 28: Fire protection control equipment
$156.00 ISO 7240-28:2008 Fire detection and alarm systems - Part 28: Fire protection control equipment
$185.00 ISO 7240-3:2010 Fire detection and alarm systems - Part 3: Audible alarm devices
$103.00 ISO 7240-4:2003 Fire detection and alarm systems -- Part 4: Power supply equipment
$162.00 ISO 7240-5:2012 Fire detection and alarm systems - Part 5: Point-type heat detectors
$185.00 ISO 7240-6:2011 Fire detection and alarm systems - Part 6: Carbon monoxide fire detectors using electro-chemical cells
$209.00 ISO 7240-7:2011 Fire detection and alarm systems - Part 7: Point-type smoke detectors using scattered light, transmitted light or ionization
$209.00 ISO 7240-8:2014 Fire detection and alarm systems - Part 8: Point-type fire detectors using a carbon monoxide sensor in combination with a heat sensor
$199.00 ISO 7240-8:2007 Fire detection and alarm systems - Part 8: Carbon monoxide fire detectors using an electro-chemical cell in combination with a heat sensor
$209.00 ISO/TS 7240-9:2012 Fire detection and alarm systems - Part 9: Test fires for fire detectors
$45.00 ISO 19891-1:2017 Ships and marine technology - Specifications for gas detectors intended for use on board ships - Part 1: Portable gas detectors for atmosphere testing of enclosed spaces
$68.00 ISO 21927-7:2017 Smoke and heat control systems - Part 7: Smoke ducts sections
$103.00 ISO 21927-8:2017 Smoke and heat control systems - Part 8: Smoke control dampers
$232.00 ISO/TS 7240-29:2017 Fire detection and alarm systems - Part 29: Video fire detectors
$103.00 ISO 7240-18:2017 Fire detection and alarm systems - Part 18: Input/output devices
$185.00 ISO 7240-22:2017 Fire detection and alarm systems - Part 22: Smoke-detection equipment for ducts
$45.00 ISO 10055:1996 Mechanical vibration - Vibration testing requirements for shipboard equipment and machinery components
$68.00 ISO 128-25:1999 Technical drawings -- General principles of presentation -- Part 25: Lines on shipbuilding drawings
$45.00 ISO/TR 14564:1995 Shipbuilding and marine structures - Marking of escape routes
$232.00 ISO 15016:2015 Ships and marine technology - Guidelines for the assessment of speed and power performance by analysis of speed trial data
$200.00 ISO 15016:2002 Ships and marine technology - Guidelines for the assessment of speed and power performance by analysis of speed trial data
$232.00 ISO 15583:2005 Ships and marine technology - Maritime standards list
$185.00 ISO 16437:2012 Ships and marine technology - Lifesaving and fire protection - Atmospheric oil mist detectors for ships
$162.00 ISO 16548:2012 Ships and marine technology - Ship design - General guidance on emergency towing procedures
$68.00 ISO 16706:2016 Ships and marine technology - Marine evacuation systems - Load calculations and testing
$138.00 ISO 16707:2016 Ships and marine technology - Marine evacuation systems - Determination of capacity
$68.00 ISO 17338:2009 Ships and marine technology - Drawings for fire protection - Indications of fire rating by divisions for ships and high-speed craft
$162.00 ISO 17631:2002 Ships and marine technology - Shipboard plans for fire protection, life-saving appliances and means of escape
$19.00 ISO 17631/Amd1:2010 - Amendment 1: Requirements specific to high speed crafts
$103.00 ISO 17907:2014 Ships and marine technology - Single point mooring arrangements for conventional tankers
$68.00 ISO 18215:2015 Ships and marine technology - Vessel machinery operations in polar waters - Guidelines
$138.00 ISO 19018:2004 Ships and marine technology - Terms, abbreviations, graphical symbols and concepts on navigation
$185.00 ISO 19019:2005 Sea-going vessels and marine technology - Instructions for planning, carrying out and reporting sea trials
$103.00 ISO 1964:1987 Shipbuilding -- Indication of details on the general arrangement plans of ships
$103.00 ISO 20283-2:2008 Mechanical vibration - Measurement of vibration on ships - Part 2: Measurement of structural vibration
$138.00 ISO 20283-3:2006 Mechanical vibration - Measurement of vibration on ships - Part 3: Pre-installation vibration measurement of shipboard equipment
$19.00 ISO 20283-3:2006/Amd1:2016 - Amendment 1
$138.00 ISO 20283-4:2012 Mechanical vibration - Measurement of vibration on ships - Part 4: Measurement and evaluation of vibration of the ship propulsion machinery
$19.00 ISO 20283-4:2012/Amd1:2014 - Amendment 1
$68.00 ISO 24408:2005 Ships and marine technology - Position-indicating lights for life-saving appliances - Testing, inspection and marking of production units
$138.00 ISO 24409-1:2010 Ships and marine technology - Design, location and use of shipboard safety signs, safety-related signs, safety notices and safety markings - Part 1: Design principles
$232.00 ISO 24409-2:2014 Ships and marine technology - Design, location and use of shipboard safety signs, safety-related signs, safety notices and safety markings - Part 2: Catalogue
$138.00 ISO 24409-3:2014 Ships and marine technology - Design, location and use of shipboard safety signs, safety-related signs, safety notices and safety markings - Part 3: Code of practice
$45.00 ISO 27991:2008 Ships and marine technology - Marine evacuation systems - Means of communication
$0.00 ISO 2923/COR1:1997 Technical corrigendum 1 to ISO 2923:1996
$68.00 ISO 2923:1996 Acoustics - Measurement of noise on board vessels
$185.00 ISO 29404:2015 Ships and marine technology - Offshore wind energy - Supply chain information flow
$103.00 ISO 30000:2009 Ships and marine technology - Ship recycling management systems - Specifications for management systems for safe and environmentally sound ship recycling facilities
$45.00 ISO 30002:2012 Ships and marine technology - Ship recycling management systems - Guidelines for selection of ship recyclers (and pro forma contract)
$185.00 ISO 30003:2009 Ships and marine technology - Ship recycling management systems - Requirements for bodies providing audit and certification of ship recycling management
$185.00 ISO 30004:2012 Ships and marine technology - Ship recycling management systems - Guidelines for the implementation of ISO 30000
$138.00 ISO 30005:2012 Ships and marine technology - Ship recycling management systems - Information control for hazardous materials in the manufacturing chain of shipbuilding and ship operations
$68.00 ISO 30006:2010 Ship recycling management systems - Diagrams to show the location of hazardous materials onboard ships
$103.00 ISO 30007:2010 Ships and marine technology - Measures to prevent asbestos emission and exposure during ship recycling
$45.00 ISO 5572:1987 Shipbuilding and marine structures -- Numbering of equipment and structural elements in ships
$68.00 ISO 7462:1985 Shipbuilding -- Principal ship dimensions -- Terminology and definitions for computer applications
$51.00 ISO 8193:1984 Shipbuilding -- Shell plating information
$88.00 ISO/PAS 18215:2012 Ships and marine technology - Vessel machinery operations in polar waters - Guidelines
$45.00 ISO 19891-1:2017 Ships and marine technology - Specifications for gas detectors intended for use on board ships - Part 1: Portable gas detectors for atmosphere testing of enclosed spaces
$138.00 ISO 20155:2017 Ships and marine technology - Test method of flow induced in-pipe noise source characteristics for a ship-used pump
$68.00 ISO 20154:2017 Ships and marine technology - Guidelines on vibration isolation design methods for shipboard auxiliary machinery