ISO 9772:2012 - $103.00   BUY NOW

Cellular plastics - Determination of horizontal burning characteristics of small specimens subjected to a small flame

ISO 9772:2012 Publication Description:

ISO 9772:2012 specifies a small-scale laboratory screening procedure for comparing the relative burning characteristics of horizontally oriented, small cellular plastic specimens, having a density less than 250 kg/m3, when exposed to an ignition source.

This method of test is intended for quality assurance and limited product evaluation of cellular plastic materials under controlled laboratory conditions, and is not intended to assess the fire behaviour of e.g. building materials or furnishings under actual fire conditions.

An optional classification system is described in an annex. It is intended for the pre-selection of cellular plastic materials for products, including the determination of the ranges of material parameters that give the same classification.

International Classification for Standards (ICS)

ICS Classification Field ICS Field Sub-Group and Number
ICS-13-Environment ICS Ignitability-Materials (13.220.40)
ICS-83-Rubber ICS Cellular Materials (83.100)

ICS Related Standards

Cart Document Number Document Title
$68.00 ISO 10047:1993 Textiles - Determination of surface burning time of fabrics
$138.00 ISO 10093:1998 Plastics - Fire tests - Standard ignition sources
$45.00 ISO 10528:1995 Textiles - Commercial laundering procedure for textile fabrics prior to flammability testing
$162.00 ISO 10840:2008 Plastics - Guidance for the use of standard fire tests
$45.00 ISO 11907-1:1998 Plastics - Smoke generation - Determination of the corrosivity of fire effluents - Part 1: Guidance
$68.00 ISO 11907-2:1995 Plastics - Smoke generation - Determination of the corrosivity of fire effluents - Part 2: Static method
$138.00 ISO 11907-3:1998 Plastics - Smoke generation - Determination of the corrosivity of fire effluents - Part 3: Dynamic decomposition method using a travelling furnace
$138.00 ISO 11907-4:1998 Plastics - Smoke generation - Determination of the corrosivity of fire effluents - Part 4: Dynamic decomposition method using a conical radiant heater
$185.00 ISO 12136:2011 Reaction to fire tests - Measurement of material properties using a fire propagation apparatus
$68.00 ISO 12138:1996 Textiles - Domestic laundering procedures for textile fabrics prior to flammability testing
$138.00 ISO 12863:2010 Standard test method for assessing the ignition propensity of cigarettes
$19.00 ISO 12863:2010/Amd1:2016 - Amendment 1
$68.00 ISO 12952-1:2010 Textiles - Assessment of the ignitability of bedding items - Part 1: Ignition source: smouldering cigarette
$68.00 ISO 12952-2:2010 Textiles - Assessment of the ignitability of bedding items - Part 2: Ignition source: match-flame equivalent
$68.00 ISO 12992:1995 Plastics - Vertical flame spread determination for film and sheet
$45.00 ISO 13774:1998 Rubber and plastics hoses for fuels for internal-combustion engines - Method of test for flammability
$103.00 ISO 14624-1:2003 Space systems - Safety and compatibility of materials - Part 1: Determination of upward flammability of materials
$138.00 ISO 14624-2:2003 Space systems - Safety and compatibility of materials - Part 2: Determination of flammability of electrical-wire insulation and accessory materials
$68.00 ISO 14624-4:2003 Space systems - Safety and compatibility of materials - Part 4: Determination of upward flammability of materials in pressurized gaseous oxygen or oxygen-enriched environments
$209.00 ISO 14696:2009 Reaction-to-fire tests - Determination of fire and thermal parameters of materials, products and assemblies using an intermediate-scale calorimeter (ICAL)
$103.00 ISO 14934-1:2010 Fire tests - Calibration and use of heat flux meters - Part 1: General principles
$185.00 ISO 14934-2:2013 Fire tests - Calibration and use of heat flux meters - Part 2: Primary calibration methods
$103.00 ISO 14934-3:2012 Fire tests - Calibration and use of heat flux meters - Part 3: Secondary calibration method
$138.00 ISO 14934-4:2014 Fire tests - Calibration and use of heat flux meters - Part 4: Guidance on the use of heat flux meters in fire tests
$132.00 ISO/TS 14934-4:2007 Fire tests - Calibration of heat flux meters - Part 4: Guidance on the use of heat flux meters in fire tests
$45.00 ISO 15029-1:1999 Petroleum and related products -- Determination of spray ignition characteristics of fire-resistant fluids -- Part 1: Spray flame persistence -- Hollow-cone nozzle method
$162.00 ISO/TS 15029-2:2012 Petroleum and related products - Determination of spray ignition characteristics of fire-resistant fluids - Part 2: Spray test - Stabilized flame heat release method
$185.00 ISO/TR 15655:2003 Fire resistance - Tests for thermo-physical and mechanical properties of structural materials at elevated temperatures for fire engineering design
$138.00 ISO 15791-1:2014 Plastics - Development and use of intermediate-scale fire tests for plastics products - Part 1: General guidance
$68.00 ISO/TS 16697:2012 Space systems - Safety and compatibility of materials - Method to determine the flammability thresholds of materials
$209.00 ISO/TR 17252:2008 Fire tests - Applicability of reaction to fire tests to fire modelling and fire safety engineering
$103.00 ISO/TS 17431:2006 Fire tests- Reduced-scale model box test
$138.00 ISO 17554:2014 Reaction to fire tests - Mass loss measurement
$123.00 ISO 17554:2005 Reaction to fire tests - Mass loss measurement
$162.00 ISO 21367:2007 Plastics - Reaction to fire - Test method for flame spread and combustion product release from vertically oriented specimens
$162.00 ISO 24473:2008 Fire tests - Open calorimetry - Measurement of the rate of production of heat and combustion products for fires of up to 40 MW
$162.00 ISO 25762:2009 Plastics - Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites
$68.00 ISO 30021:2013 Plastics - Burning behaviour - Intermediate-scale fire-resistance testing of fibre-reinforced polymer composites
$68.00 ISO 340:2013 Conveyor belts - Laboratory scale flammability characteristics - Requirements and test method
$68.00 ISO 3582:2000 Flexible cellular polymeric materials -- Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame
$19.00 ISO 3582/Amd1:2007 Cellular plastic and cellular rubber materials - Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame - Amendment 1
$45.00 ISO 3795:1989 Road vehicles, and tractors and machinery for agriculture and forestry -- Determination of burning behaviour of interior materials
$45.00 ISO 4589-1:1996 Plastics - Determination of burning behaviour by oxygen index - Part 1: Guidance
$138.00 ISO 4589-2:1996 Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test
$19.00 ISO 4589-2/Amd1:2005 Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test - Amendment 1
$103.00 ISO 4589-3:1996 Plastics - Determination of burning behaviour by oxygen index - Part 3: Elevated-temperature test
$103.00 ISO 4880:1997 Burning behaviour of textiles and textile products - Vocabulary
$185.00 ISO 5659-2:2012 Plastics - Smoke generation - Part 2: Determination of optical density by a single-chamber test
$45.00 ISO 6925:1982 Textile floor coverings - Burning behaviour - Tablet test at ambient temperature
$103.00 ISO 6940:2004 Textile fabrics - Burning behaviour - Determination of ease of ignition of vertically oriented specimens
$103.00 ISO 6941:2003 Textile fabrics - Burning behaviour - Measurement of flame spread properties of vertically oriented specimens
$68.00 ISO 7176-16:2012 Wheelchairs - Part 16: Resistance to ignition of postural support devices
$68.00 ISO 7822:1990 Textile glass reinforced plastics - Determination of void content - Loss on ignition, mechanical disintegration and statistical counting methods
$68.00 ISO 8030:2014 Rubber and plastics hoses - Method of test for flammability
$58.00 ISO 8030:1995 Rubber and plastics hoses - Method of test for flammability
$68.00 ISO 8191-1:1987 Furniture - Assessment of the ignitability of upholstered furniture - Part 1 : Ignition source : smouldering cigarette
$68.00 ISO 8191-2:1988 Furniture - Assessment of ignitability of upholstered furniture - Part 2 : Ignition source : match-flame equivalent
$68.00 ISO 871:2006 Plastics - Determination of ignition temperature using a hot-air furnace
$138.00 ISO 9239-1:2010 Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source
$138.00 ISO 9239-2:2002 Reaction to fire tests for floorings - Part 2: Determination of flame spread at a heat flux level of 25 kW/m2
$45.00 ISO/TR 9240:1992 Textiles - Design of apparel for reduced fire hazard
$68.00 ISO 9773:1998 Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source
$19.00 ISO 9773/Amd1:2003 Plastics - Determination of burning behaviour of flexible vertical specimens in contact with a small-flame ignition source - Amendment 1: Specimens
$39.00 JIS A 1321:1994 Testing method for incombustibility of internal finish material and procedure of buildings
$29.00 JIS C 0066:2001 Flammability of solid non-metallic materials when exposed to flame sources -- List of test methods
$32.00 JIS C 60695-2-10:2004 Fire hazard testing -- Glow-wire apparatus and common test procedure
$26.00 JIS C 60695-2-11:2004 Fire hazard testing -- Glow-wire flammability test method for end-products
$58.00 JIS C 60695-2-13:2013 Fire hazard testing -- Part 2-13: Glowing/hot-wire based test methods -- Glow-wire ignition temperature (GWIT) test method for materials
$103.00 ISO 12992:2017 Plastics - Vertical flame spread determination for film and sheet
$103.00 ISO/TS 15791-2:2017 Plastics - Development and use of intermediate-scale fire tests for plastics products - Part 2: Use of intermediate-scale tests for semi-finished and finished products
$45.00 ISO 4589-1:2017 Plastics - Determination of burning behaviour by oxygen index - Part 1: General requirements
$162.00 ISO 4589-2:2017 Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test
$138.00 ISO 4589-3:2017 Plastics - Determination of burning behaviour by oxygen index - Part 3: Elevated-temperature test
$185.00 ISO 5659-2:2017 Plastics - Smoke generation - Part 2: Determination of optical density by a single-chamber test
$45.00 ISO 10066:1991 Flexible cellular polymeric materials - Determination of creep in compression
$45.00 ISO 11752:2000 Flexible cellular polymeric materials -- Moulded and extruded sponge or expanded cellular rubber products -- Compressibility test on finished parts
$19.00 ISO 11752/Amd1:2006 Flexible cellular polymeric materials - Moulded and extruded sponge or expanded cellular rubber products - Compressibility test on finished parts - Amendment 1
$45.00 ISO 1209-1:2007 Rigid cellular plastics - Determination of flexural properties - Part 1: Basic bending test
$45.00 ISO 1209-2:2007 Rigid cellular plastics - Determination of flexural properties - Part 2: Determination of flexural strength and apparent flexural modulus of elasticity
$45.00 ISO 13362:2000 Flexible cellular polymeric materials -- Determination of compression set under humid conditions
$103.00 ISO 1663:2007 Rigid cellular plastics - Determination of water vapour transmission properties
$68.00 ISO 1798:2008 Flexible cellular polymeric materials - Determination of tensile strength and elongation at break
$45.00 ISO 1856:2000 Flexible cellular polymeric materials -- Determination of compression set
$19.00 ISO 1856/Amd1:2007 Polymeric materials, cellular flexible - Determination of compression set - Amendment 1
$45.00 ISO 1922:2012 Rigid cellular plastics - Determination of shear strength
$45.00 ISO 1923:1981 Cellular plastics and rubbers - Determination of linear dimensions
$68.00 ISO 1926:2009 Rigid cellular plastics - Determination of tensile properties
$103.00 ISO 20392:2007 Thermal-insulating materials - Determination of compressive creep
$45.00 ISO 20393:2007 Thermal-insulating materials - Determination of long-term water absorption by diffusion
$45.00 ISO 20394:2007 Thermal-insulating materials - Determination of freeze-thaw resistance
$103.00 ISO 2439:2008 Flexible cellular polymeric materials - Determination of hardness (indentation technique)
$45.00 ISO 2440:1997 Flexible and rigid cellular polymeric materials - Accelerated ageing tests
$19.00 ISO 2440/Amd1:2010 Polymeric materials, cellular flexible - Accelerated ageing tests - Amendment 1
$19.00 ISO 2440:1997/Amd2:2014 - Amendment 2
$45.00 ISO 24999:2008 Flexible cellular polymeric materials - Determination of fatigue by a constant-strain procedure
$45.00 ISO 2796:1986 Cellular plastics, rigid - Test for dimensional stability
$68.00 ISO 2896:2001 Rigid cellular plastics -- Determination of water absorption
$103.00 ISO 3385:2014 Flexible cellular polymeric materials - Determination of fatigue by constant-load pounding
$58.00 ISO 3385:1989 Flexible cellular polymeric materials - Determination of fatigue by constant-load pounding
$45.00 ISO 3386-1:1986 Polymeric materials, cellular flexible - Determination of stress-strain characteristics in compression - Part 1 : Low-density materials
$19.00 ISO 3386-1/Amd1:2010 Flexible cellular materials - Determination of compression stress/strain characteristic and compression stress value - Part 1: Low density materials - Amendment 1
$45.00 ISO 3386-2:1997 Flexible cellular polymeric materials - Determination of stress-strain characteristics in compression - Part 2: High-density materials
$19.00 ISO 3386-2/Amd1:2010 Polymeric materials, cellular flexible - Determination of stress-strain characteristic in compression - Part 2: High density materials - Amendment 1
$68.00 ISO 3582:2000 Flexible cellular polymeric materials -- Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame
$19.00 ISO 3582/Amd1:2007 Cellular plastic and cellular rubber materials - Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame - Amendment 1
$138.00 ISO 4590:2016 Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells
$123.00 ISO 4590:2002 Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells
$68.00 ISO 4638:1984 Polymeric materials, cellular flexible - Determination of air flow permeability
$68.00 ISO 4651:1988 Cellular rubbers and plastics - Determination of dynamic cushioning performance
$19.00 ISO 4651/Amd1:2006 Cellular rubbers and plastics - Determination of dynamic cushioning performance - Amendment 1
$68.00 ISO 4897:1985 Cellular plastics - Determination of the coefficient of linear thermal expansion of rigid materials at sub-ambient temperatures
$103.00 ISO 4898:2010 Rigid cellular plastics - Thermal insulation products for buildings - Specifications
$103.00 ISO 5999:2013 Flexible cellular polymeric materials - Polyurethane foam for load-bearing applications excluding carpet underlay - Specification
$45.00 ISO 6187:2001 Rigid cellular plastics - Determination of friability
$45.00 ISO 6453:1985 Polymeric materials, cellular flexible - Polyvinylchloride foam sheeting - Specification
$45.00 ISO 6915:1991 Flexible cellular polymeric materials - Polyurethane foam for laminate use - Specification
$103.00 ISO 6916-1:1995 Flexible cellular polymeric materials - Sponge and expanded cellular rubber products - Specification - Part 1: Sheeting
$19.00 ISO 6916-1/Amd1:2007 Flexible cellular polymeric materials - Sponge and expanded cellular rubber products - Specification - Part 1: Sheeting - Amendment 1
$138.00 ISO 6916-2:2001 Flexible cellular polymeric materials - Sponge and expanded cellular rubber products - Specification - Part 2: Mouldings and extrusions
$68.00 ISO 7214:2012 Cellular plastics - Polyethylene - Methods of test
$68.00 ISO 7231:2010 Polymeric materials, cellular, flexible - Determination of air flow value at constant pressure-drop
$45.00 ISO 7616:1986 Cellular plastics, rigid - Determination of compressive creep under specified load and temperature conditions
$45.00 ISO 7850:1986 Cellular plastics, rigid - Determination of compressive creep
$68.00 ISO 8067:2008 Flexible cellular polymeric materials - Determination of tear strength
$45.00 ISO 8307:2007 Flexible cellular polymeric materials - Determination of resilience by ball rebound
$68.00 ISO 844:2014 Rigid cellular plastics - Determination of compression properties
$77.00 ISO 844:2007 Rigid cellular plastics - Determination of compression properties
$45.00 ISO 845:2006 Cellular plastics and rubbers - Determination of apparent density
$68.00 ISO 8873-1:2006 Rigid cellular plastics - Spray-applied polyurethane foam for thermal insulation - Part 1: Material specifications
$185.00 ISO 8873-2:2007 Rigid cellular plastics - Spray-applied polyurethane foam for thermal insulation - Part 2: Application
$103.00 ISO 8873-3:2007 Rigid cellular plastics - Spray-applied polyurethane foam for thermal insulation - Part 3: Test methods
$45.00 ISO 9054:1990 Cellular plastics, rigid - Test methods for self-skinned, high-density materials
$68.00 ISO 9774:2004 Thermal insulation for building applications - Guidelines for selecting properties
$107.00 JIS K 6401:2011 Flexible cellular polymeric materials -- Polyurethane foam for load-bearing applications excluding carpet underlay -- Specification
$39.00 JIS Z 0240:2002 Structural cushioning materials for packaging -- Determination of cushioning performance