ISO 9645:1990 - $45.00   BUY NOW

Acoustics - Measurement of noise emitted by two-wheeled mopeds in motion - Engineering method

ISO 9645:1990 Publication Description:

This International Standard specifies an engineering method for measuring the noise emitted by two-wheeled mopeds in motion [as defined in ISO 38331)].

The method is designed to meet the requirement of simplicity as far as it is consistent with reproducibility of results and realism in the operating conditions of the moped.

The specifications are intended to reproduce the noise level in urban traffic flow of irregular character, with full use of the engine power available.

It should be noted that spot checking on the road of mopeds in use can rarely be made in an ideal acoustical environment. If measurements have to be carried out on the road in an acoustical environment which does not fulfil the requirements stated in this International Standard, it should be recognized that the results obtained may deviate appreciably from the results obtained using the specified conditions. A method better fitted to the spot checking on road of mopeds in use will be specified in a future International Standard.

1) ISO 3833 : 1977, Road vehicles – Types – Terms and definitions.

International Classification for Standards (ICS)

ICS Classification Field ICS Field Sub-Group and Number
ICS-17-Metrology ICS Noise Emitted-Means-Transport (17.140.30)
ICS-43-Road ICS Motorcycles/Mopeds (43.140)

ICS Related Standards

Cart Document Number Document Title
$185.00 ISO 10844:2014 Acoustics - Specification of test tracks for measuring noise emitted by road vehicles and their tyres
$162.00 ISO 11819-1:1997 Acoustics - Measurement of the influence of road surfaces on traffic noise - Part 1: Statistical Pass-By method
$138.00 ISO 13325:2003 Tyres - Coast-by methods for measurement of tyre-to-road sound emission
$138.00 ISO 13472-1:2002 Acoustics - Measurement of sound absorption properties of road surfaces in situ - Part 1: Extended surface method
$138.00 ISO 13472-2:2010 Acoustics - Measurement of sound absorption properties of road surfaces in situ - Part 2: Spot method for reflective surfaces
$138.00 ISO 13473-1:1997 Characterization of pavement texture by use of surface profiles - Part 1: Determination of Mean Profile Depth
$103.00 ISO 13473-2:2002 Characterization of pavement texture by use of surface profiles - Part 2: Terminology and basic requirements related to pavement texture profile analysis
$68.00 ISO 13473-3:2002 Characterization of pavement texture by use of surface profiles - Part 3: Specification and classification of profilometers
$162.00 ISO/TS 13473-4:2008 Characterization of pavement texture by use of surface profiles - Part 4: Spectral analysis of surface profiles
$162.00 ISO 13473-5:2009 Characterization of pavement texture by use of surface profiles - Part 5: Determination of megatexture
$103.00 ISO 14509-1:2008 Small craft - Airborne sound emitted by powered recreational craft - Part 1: Pass-by measurement procedures
$88.00 ISO 14509-2:2006 Small craft - Airborne sound emitted by powered recreational craft - Part 2: Sound assessment using reference craft
$68.00 ISO 14509-3:2009 Small craft - Airborne sound emitted by powered recreational craft - Part 3: Sound assessment using calculation and measurement procedures
$185.00 ISO 16254:2016 Acoustics - Measurement of sound emitted by road vehicles of category M and N at standstill and low speed operation - Engineering method
$138.00 ISO 17208-1:2016 Underwater acoustics - Quantities and procedures for description and measurement of underwater sound from ships - Part 1: Requirements for precision measurements in deep water used for comparison purposes
$103.00 ISO 20283-2:2008 Mechanical vibration - Measurement of vibration on ships - Part 2: Measurement of structural vibration
$138.00 ISO 20283-3:2006 Mechanical vibration - Measurement of vibration on ships - Part 3: Pre-installation vibration measurement of shipboard equipment
$19.00 ISO 20283-3:2006/Amd1:2016 - Amendment 1
$138.00 ISO 20283-4:2012 Mechanical vibration - Measurement of vibration on ships - Part 4: Measurement and evaluation of vibration of the ship propulsion machinery
$19.00 ISO 20283-4:2012/Amd1:2014 - Amendment 1
$185.00 ISO 20906:2009 Acoustics - Unattended monitoring of aircraft sound in the vicinity of airports
$19.00 ISO 20906:2009/Amd1:2013 - Amendment 1
$68.00 ISO 2671:1982 Environmental tests for aircraft equipment - Part 3.4 : Acoustic vibration
$68.00 ISO 2922:2000 Acoustics -- Measurement of airborne sound emitted by vessels on inland waterways and harbours
$19.00 ISO 2922:2000/Amd1:2013 - Amendment 1
$0.00 ISO 2923/COR1:1997 Technical corrigendum 1 to ISO 2923:1996
$68.00 ISO 2923:1996 Acoustics - Measurement of noise on board vessels
$209.00 ISO 3095:2013 Acoustics - Railway applications - Measurement of noise emitted by railbound vehicles
$103.00 ISO 3381:2005 Railway applications - Acoustics - Measurement of noise inside railbound vehicles
$209.00 ISO 362-1:2015 Measurement of noise emitted by accelerating road vehicles - Engineering method - Part 1: M and N categories
$211.00 ISO 362-1:2007 Measurement of noise emitted by accelerating road vehicles - Engineering method - Part 1: M and N categories
$211.00 ISO 362-1:2007 Measurement of noise emitted by accelerating road vehicles - Engineering method - Part 1: M and N categories
$162.00 ISO 362-2:2009 Measurement of noise emitted by accelerating road vehicles - Engineering method - Part 2: L category
$209.00 ISO 362-3:2016 Measurement of noise emitted by accelerating road vehicles - Engineering method - Part 3: Indoor testing M and N categories
$45.00 ISO 5128:1980 Acoustics - Measurement of noise inside motor vehicles
$68.00 ISO 5129:2001 Acoustics - Measurement of sound pressure levels in the interior of aircraft during flight
$19.00 ISO 5129:2001/Amd1:2013 - Amendment 1
$103.00 ISO 5130:2007 Acoustics - Measurements of sound pressure level emitted by stationary road vehicles
$19.00 ISO 5130/Amd1:2012 Acoustics - Measurement of noise emitted by stationary road vehicles - Survey method - Amendment 1
$68.00 ISO/PAS 11819-4:2013 Acoustics - Method for measuring the influence of road surfaces on traffic noise - Part 4: SPB method using backing board
$149.00 ISO/PAS 17208-1:2012 Acoustics - Quantities and procedures for description and measurement of underwater sound from ships - Part 1: General requirements for measurements in deep water
$209.00 ISO 11819-2:2017 Acoustics - Measurement of the influence of road surfaces on traffic noise - Part 2: The close-proximity method
$103.00 ISO/TS 11819-3:2017 Acoustics - Measurement of the influence of road surfaces on traffic noise - Part 3: Reference tyres
$103.00 ISO/TS 13471-1:2017 Acoustics - Temperature influence on tyre/road noise measurement - Part 1: Correction for temperature when testing with the CPX method
$45.00 ISO 18405:2017 Underwater acoustics - Terminology
$162.00 ISO 18406:2017 Underwater acoustics - Measurement of radiated underwater sound from percussive pile driving
$103.00 ISO 10190:2008 Motorcycle chains - Characteristics and test methods
$68.00 ISO 10355:2004 Mopeds - Positioning of lighting and light-signalling devices
$68.00 ISO 11460:2007 Two-wheeled motorcycles - Positioning of lighting and light-signalling devices
$138.00 ISO 11486:2006 Motorcycles - Methods for setting running resistance on a chassis dynamometer
$19.00 ISO 11486:2006/Amd1:2012 Motorcycles - Methods for setting running resistance on a chassis dynamometer - Amendment 1
$162.00 ISO 11838:1997 Motorcycle and motorcycle-rider kinematics - Vocabulary
$19.00 ISO 11838/Amd1:2011 Motorcycle and motorcycle-rider kinematics - Vocabulary - Amendment 1
$103.00 ISO 12364:2001 Two-wheeled motorcycles - Antilock braking systems (ABS) - Tests and measurement methods
$103.00 ISO 12366:2001 Two-wheeled mopeds - Antilock braking systems (ABS) - Tests and measurement methods
$103.00 ISO/TR 13062:2015 Electric mopeds and motorcycles - Terminology and classification
$138.00 ISO 13063:2012 Electrically propelled mopeds and motorcycles - Safety specifications
$103.00 ISO 13064-1:2012 Battery-electric mopeds and motorcycles - Performance - Part 1: Reference energy consumption and range
$68.00 ISO 13064-2:2012 Battery-electric mopeds and motorcycles - Performance - Part 2: Road operating characteristics
$162.00 ISO 13232-1:2005 Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 1: Definitions, symbols and general considerations
$19.00 ISO 13232-1/Amd1:2012 Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 1: Definitions, symbols and general considerations - Amendment 1: MATD test helmet, ground impact, and injury costs
$209.00 ISO 13232-2:2005 Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 2: Definition of impact conditions in relation to accident data
$232.00 ISO 13232-3:2005 Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 3: Motorcyclist anthropometric impact dummy
$19.00 ISO 13232-3/Amd1:2012 Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 3: Anthropometric impact dummy - Amendment 1: MATD test helmet
$232.00 ISO 13232-4:2005 Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 4: Variables to be measured, instrumentation and measurement procedures
$232.00 ISO 13232-5:2005 Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 5: Injury indices and risk/benefit analysis
$138.00 ISO 13232-5/Amd1:2012 Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 5: Injury indices and risk/benefit analysis - Amendment 1: Ground impact and injury costs
$185.00 ISO 13232-6:2005 Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 6: Full-scale impact-test procedures
$19.00 ISO 13232-6/Amd1:2012 Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 6: Full-scale impact-test procedures - Amendment 1: MATD test helmet
$162.00 ISO 13232-7:2005 Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 7: Standardized procedures for performing computer simulations of motorcycle impact tests
$19.00 ISO 13232-7/Amd1:2012 Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 7: Standardized procedures for performing computer simulations of motorcycle impact tests - Amendment 1: Ground impact
$209.00 ISO 13232-8:2005 Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 8: Documentation and reports
$19.00 ISO 13232-8/Amd1:2012 Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 8: Documentation and reports - Amendment 1: Ground impact and injury costs
$162.00 ISO 14722:1998 Moped and moped-rider kinematics - Vocabulary
$19.00 ISO 14722/Amd1:2011 Moped and moped-rider kinematics - Vocabulary - Amendment 1
$68.00 ISO 17479:2013 Motorcycles - Measurement methods for gaseous exhaust emissions during inspection or maintenance
$162.00 ISO 18246:2015 Electrically propelled mopeds and motorcycles - Safety requirements for conductive connection to an external electric power supply
$103.00 ISO 18580:2015 Motorcycles - Verification of total running resistance force during mode running on a chassis dynamometer
$68.00 ISO 19449:2015 Mopeds - Measurement methods for gaseous exhaust emissions during inspection or maintenance
$68.00 ISO 19689:2016 Motorcycles and mopeds - Communication between vehicle and external equipment for diagnostics - Diagnostic connector and related electrical circuits, specification and use
$138.00 ISO 28981:2009 Mopeds - Methods for setting the running resistance on a chassis dynamometer
$19.00 ISO 28981:2009/Amd1:2015 - Amendment 1
$138.00 ISO 4106:2012 Motorcycles - Engine test code - Net power
$68.00 ISO 4129:2012 Road vehicles - Mopeds - Symbols for controls, indicators and tell-tales
$45.00 ISO 4151:1987 Road vehicles - Mopeds - Type, location and functions of controls
$138.00 ISO 4164:2012 Mopeds - Engine test code - Net power
$68.00 ISO 4249-3:2010 Motorcycle tyres and rims (code-designated series) - Part 3: Rims
$103.00 ISO 5751-1:2010 Motorcycle tyres and rims (metric series) - Part 1: Design guides
$162.00 ISO 5751-2:2010 Motorcycle tyres and rims (metric series) - Part 2: Tyre dimensions and load-carrying capacities
$45.00 ISO 5751-3:2010 Motorcycle tyres and rims (metric series) - Part 3: Range of approved rim contours
$45.00 ISO 6054-2:1990 Motorcycle tyres and rims (Code-designated series) - Diameter codes 4 to 12 - Part 2: Rims
$209.00 ISO 6460-1:2007 Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - Part 1: General test requirements
$19.00 ISO 6460-1:2007/Amd1:2015 - Amendment 1
$209.00 ISO 6460-2:2014 Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - Part 2: Test cycles and specific test conditions
$139.00 ISO 6460-2:2007 Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - Part 2: Test cycles and specific test conditions
$103.00 ISO 6460-3:2007 Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - Part 3: Fuel consumption measurement at a constant speed
$19.00 ISO 6460-3:2007/Amd1:2015 - Amendment 1
$68.00 ISO 6725:1981 Road vehicles - Dimensions of two-wheeled mopeds and motorcycles - Terms and definitions
$45.00 ISO 6726:1988 Mopeds and motorcycles with two wheels - Masses - Vocabulary
$68.00 ISO 6727:2012 Road vehicles - Motorcycles - Symbols for controls, indicators and tell-tales
$209.00 ISO 6855-1:2012 Mopeds - Measurement method for gaseous exhaust emissions and fuel consumption - Part 1: General test requirements
$103.00 ISO 6855-2:2012 Mopeds - Measurement method for gaseous exhaust emissions and fuel consumption - Part 2: Test cycles and specific test conditions
$103.00 ISO 6855-3:2012 Mopeds - Measurement method for gaseous exhaust emissions and fuel consumption - Part 3: Fuel consumption measurement at a constant speed
$103.00 ISO 7116:2011 Mopeds - Measurement method for determining maximum speed
$103.00 ISO 7117:2010 Motorcycles - Measurement method for determining maximum speed
$68.00 ISO 7398:1990 Motorcycles - Direct current flasher units
$45.00 ISO 7399:1990 Motorcycles - Alternating current flasher units
$68.00 ISO 7400:1990 Mopeds - Alternating current flasher units
$68.00 ISO 8052:1990 Mopeds - Direct current flasher units
$68.00 ISO 8644:2006 Motorcycles - Light-alloy wheels - Test method
$45.00 ISO 8645:1988 Mopeds - Light-alloy wheels - Test method
$103.00 ISO 8705:2005 Mopeds - Measurement method for location of centre of gravity
$45.00 ISO 8706:1990 Two-wheeled mopeds - Parking stability of side- and centre-stands
$138.00 ISO 8709:2010 Mopeds - Brakes and brake systems - Tests and measurement methods
$162.00 ISO 8710:2010 Motorcycles - Brakes and brake systems - Tests and measurement methods
$68.00 ISO 9021:1988 Motorcycles - Controls - Types, positions and functions
$103.00 ISO 9043:2008 Mopeds - Measurement method for moments of inertia
$103.00 ISO 9129:2008 Motorcycles - Measurement methods for moments of inertia
$103.00 ISO 9130:2005 Motorcycles - Measurement method for location of centre of gravity
$103.00 ISO 9131:1993 Three-wheeled mopeds and motorcycles - Dimensions - Vocabulary
$68.00 ISO 9132:1990 Three-wheeled mopeds and motorcycles - Masses - Vocabulary
$45.00 ISO 9565:1990 Two-wheeled motorcycles - Parking stability of side- and centre-stands
$68.00 ISO 9987:1990 Motorcycles - Measurement of variation of dipped beam inclination as a function of load
$162.00 ISO/PAS 19695:2015 Motorcycles - Functional safety
$107.00 JIS D 1044:2001 Powered two-wheeled vehicles -- Measurement method of exhaust (tail pipe) gases from spark ignition engines
$185.00 ISO 18243:2017 Electrically propelled mopeds and motorcycles - Test specifications and safety requirements for lithium-ion battery systems
$103.00 ISO/TS 19466:2017 Electrically propelled mopeds and motorcycles - Test method for evaluating performance of regenerative braking systems