ISO 9614-3:2002 - $162.00   BUY NOW

Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 3: Precision method for measurement by scanning

ISO 9614-3:2002 Publication Description:

ISO 9614-3:2002 specifies a method for measuring the component of sound intensity normal to a measurement surface which is chosen so as to enclose the sound source(s) of which the sound power level is to be determined.

Surface integration of the intensity component normal to the measurement surface is approximated by subdividing the measurement surface into contiguous partial surfaces, and scanning the intensity probe over each partial surface along a continuous path which covers the extent of the partial surface. The measurement instrument determines the averaged normal intensity component and averaged squared sound pressure over the duration of each scan. The scanning operation can be performed either manually or by means of a mechanical system.

The octave band or band-limited weighted sound power level is calculated from the measured one-third-octave- band values. The method is applicable to any source for which a physically stationary measurement surface can be defined, and on which the sound generated by the source under test and by other significant extraneous sources are stationary in time. The source is defined by the choice of measurement surface. The method is applicable in specific test environments fulfilling all relevant requirements of ISO 9614-3.

ISO 9614-3 specifies certain ancillary procedures, described in annex C, to be followed in conjunction with the sound power determination. The results are used to indicate the quality of the determination, and hence the grade of accuracy. If the quality of the determination does not meet the requirements of ISO 9614-3, the test procedure shall be modified in the manner indicated.

ISO 9614-3 is not applicable to any frequency band in which the sound power of the source is found to be negative on measurement.

It is applicable to sources situated in any environment which is neither so variable over time as to reduce the accuracy of the measurement of sound intensity to an unacceptable degree, nor subjects the intensity measurement probe to gas flows of unacceptable speed or unsteadiness.

In some cases it will be found that the test conditions are too adverse to allow the requirements of ISO 9614-3 to be met. For example, extraneous noise levels can exceed the dynamic capability of the measuring instrument or can vary to an excessive degree during the test. In such cases the method given in ISO 9614-3 is not suitable for the determination of the sound power level of the source.

International Classification for Standards (ICS)

ICS Classification Field ICS Field Sub-Group and Number
ICS-17-Metrology ICS Measurement-Acoustics-General (17.140.01)

ICS Related Standards

Cart Document Number Document Title
$138.00 ISO 10534-1:1996 Acoustics - Determination of sound absorption coefficient and impedance in impedance tubes - Part 1: Method using standing wave ratio
$162.00 ISO 10534-2:1998 Acoustics - Determination of sound absorption coefficient and impedance in impedance tubes - Part 2: Transfer-function method
$138.00 ISO 10846-1:2008 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 1: Principles and guidelines
$162.00 ISO 10846-2:2008 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion
$185.00 ISO 10846-3:2002 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 3: Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion
$162.00 ISO 10846-4:2003 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 4: Dynamic stiffness of elements other than resilient supports for translatory motion
$138.00 ISO 10846-5:2008 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion
$103.00 ISO 10847:1997 Acoustics - In-situ determination of insertion loss of outdoor noise barriers of all types
$103.00 ISO 11205:2003 Acoustics - Noise emitted by machinery and equipment - Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity
$103.00 ISO 11546-1:1995 Acoustics - Determination of sound insulation performances of enclosures - Part 1: Measurements under laboratory conditions (for declaration purposes)
$103.00 ISO 11546-2:1995 Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes)
$68.00 ISO 11821:1997 Acoustics - Measurement of the in situ sound attenuation of a removable screen
$138.00 ISO 11904-1:2002 Acoustics -- Determination of sound immission from sound sources placed close to the ear -- Part 1: Technique using a microphone in a real ear (MIRE technique) (available in English only)
$103.00 ISO 11904-2:2004 Acoustics - Determination of sound immission from sound sources placed close to the ear - Part 2: Technique using a manikin
$68.00 ISO 11957:1996 Acoustics - Determination of sound insulation performance of cabins - Laboratory and in situ measurements
$45.00 ISO 12913-1:2014 Acoustics - Soundscape - Part 1: Definition and conceptual framework
$138.00 ISO 12999-1:2014 Acoustics - Determination and application of measurement uncertainties in building acoustics - Part 1: Sound insulation
$185.00 ISO 13474:2009 Acoustics - Framework for calculating a distribution of sound exposure levels for impulsive sound events for the purposes of environmental noise assessment
$185.00 ISO 14163:1998 Acoustics - Guidelines for noise control by silencers
$185.00 ISO 15667:2000 Acoustics -- Guidelines for noise control by enclosures and cabins
$45.00 ISO 16:1975 Acoustics - Standard tuning frequency (Standard musical pitch)
$45.00 ISO 1683:2015 Acoustics - Preferred reference values for acoustical and vibratory levels
$51.00 ISO 1683:2008 Acoustics - Preferred reference values for acoustical and vibratory levels
$68.00 ISO 16832:2006 Acoustics - Loudness scaling by means of categories
$138.00 ISO 17534-1:2015 Acoustics - Software for the calculation of sound outdoors - Part 1: Quality requirements and quality assurance
$138.00 ISO/TR 17534-2:2014 Acoustics - Software for the calculation of sound outdoors - Part 2: General recommendations for test cases and quality assurance interface
$209.00 ISO/TR 17534-3:2015 Acoustics - Software for the calculation of sound outdoors - Part 3: Recommendations for quality assured implementation of ISO 9613-2 in software according to ISO 17534-1
$185.00 ISO 1996-2:2007 Acoustics - Description, measurement and assessment of environmental noise - Part 2: Determination of environmental noise levels
$68.00 ISO/TR 25417:2007 Acoustics - Definitions of basic quantities and terms
$138.00 ISO 26101:2012 Acoustics - Test methods for the qualification of free-field environments
$45.00 ISO 266:1997 Acoustics - Preferred frequencies
$138.00 ISO 3740:2000 Acoustics -- Determination of sound power levels of noise sources -- Guidelines for the use of basic standards
$209.00 ISO 3741:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for reverberation test rooms
$185.00 ISO 3743-1:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for small movable sources in reverberant fields - Part 1: Comparison method for a hard-walled test room
$138.00 ISO 3743-2:1994 Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 2: Methods for special reverberation test rooms
$209.00 ISO 3744:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane
$209.00 ISO 3745:2012 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for anechoic rooms and hemi-anechoic rooms
$185.00 ISO 3746:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane
$185.00 ISO 3747:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering/survey methods for use in situ in a reverberant environment
$103.00 ISO 532:1975 Acoustics - Method for calculating loudness level
$138.00 ISO 6926:2016 Acoustics - Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels
$88.00 ISO 6926:1999 Acoustics -- Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels
$45.00 ISO 7196:1995 Acoustics - Frequency-weighting characteristic for infrasound measurements
$138.00 ISO 9613-1:1993 Acoustics - Attenuation of sound during propagation outdoors - Part 1: Calculation of the absorption of sound by the atmosphere
$103.00 ISO 9613-2:1996 Acoustics - Attenuation of sound during propagation outdoors - Part 2: General method of calculation
$138.00 ISO 9614-1:1993 Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 1: Measurement at discrete points
$138.00 ISO 9614-2:1996 Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 2: Measurement by scanning
$162.00 ISO/PAS 20065:2016 Acoustics - Objective method for assessing the audibility of tones in noise - Engineering method
$45.00 ISO 18405:2017 Underwater acoustics - Terminology
$209.00 ISO 1996-2:2017 Acoustics - Description, measurement and assessment of environmental noise - Part 2: Determination of sound pressure levels
$138.00 ISO 26101:2017 Acoustics - Test methods for the qualification of free-field environments
$19.00 ISO 3745:2012/Amd1:2017 - Amendment 1
$209.00 ISO 532-1:2017 Acoustics - Methods for calculating loudness - Part 1: Zwicker method
$162.00 ISO 532-2:2017 Acoustics - Methods for calculating loudness - Part 2: Moore-Glasberg method