ISO/TR 9310:1987 - $123.00   BUY NOW

Road vehicles - Smoke measurement of compression-ignition (diesel) engines - Survey of short in-service tests

ISO/TR 9310:1987 Publication Description:

This Technical Report describes the different simplified short tests for the determination of the exhaust smoke emission of diesel engines of vehicles in service. Gives terms and definitions. Annex A describes the test methods. Annex B gives the working conditions of the engine during the measurement. The annexes C to K describe further details.

International Classification for Standards (ICS)

ICS Classification Field ICS Field Sub-Group and Number
ICS-43-Road ICS Pressure Charging (43.060.20)
ICS-13-Environment ICS Transport Exhaust Emissions (13.040.50)

ICS Related Standards

Cart Document Number Document Title
$103.00 ISO 11841-1:2000 Road vehicles and internal combustion engines - Filter vocabulary - Part 1: Definitions of filters and filter components
$103.00 ISO 11841-2:2000 Road vehicles and internal combustion engines - Filter vocabulary - Part 2: Definitions of characteristics of filters and their components
$103.00 ISO 12103-1:2016 Road vehicles - Test contaminants for filter evaluation - Part 1: Arizona test dust
$88.00 ISO 12103-1:1997 Road vehicles - Test dust for filter evaluation - Part 1: Arizona test dust
$68.00 ISO 12103-2:1997 Road vehicles - Test dust for filter evaluation - Part 2: Aluminium oxide test dust
$68.00 ISO 13556:1998 Road vehicles - Localization of exhaust system leaks and equipment specifications
$209.00 ISO 16183:2002 Heavy duty engines - Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions
$68.00 ISO 16247:2004 Road vehicles - Detection of exhaust system leaks - Helium test method and detection device specification
$138.00 ISO 17536-1:2015 Road vehicles - Aerosol separator performance test for internal combustion engines - Part 1: General
$68.00 ISO/TS 17536-3:2014 Road vehicles - Aerosol separator performance test for internal combustion engines - Part 3: Method to perform engine gravimetric test
$209.00 ISO/TS 19713-1:2010 Road vehicles - Inlet air cleaning equipment for internal combustion engines and compressors - Part 1: Fractional efficiency testing with fine particles (0,3 m to 5 m optical diameter)
$185.00 ISO/TS 19713-2:2010 Road vehicles - Inlet air cleaning equipment for internal combustion engines and compressors - Part 2: Fractional efficiency testing with coarse particles (5 m to 40 m optical diameter)
$45.00 ISO 3929:2003 Road vehicles -- Measurement methods for exhaust gas emissions during inspection or maintenance
$185.00 ISO 5011:2014 Inlet air cleaning equipment for internal combustion engines and compressors - Performance testing
$22.00 ISO 7652/AMD1:1992 Amendment 1 to ISO 7652:1983
$51.00 ISO 7750-1:1992 Commercial vehicles - Dimensions of air filter elements - Part 1: Types A and B
$51.00 ISO 7750-2:1984 Road vehicles - Air filter elements for commercial vehicles - Dimensions - Part 2 : Types C and D
$138.00 ISO/TS 17536-2:2017 Road vehicles - Aerosol separator performance test for internal combustion engines - Part 2: Laboratory test method
$103.00 ISO 10054:1998 Internal combustion compression-ignition engines - Measurement apparatus for smoke from engines operating under steady-state conditions - Filter-type smokemeter
$209.00 ISO 11614:1999 Reciprocating internal combustion compression-ignition engines -- Apparatus for measurement of the opacity and for determination of the light absorption coefficient of exhaust gas
$68.00 ISO 15031-1:2010 Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 1: General information and use case definition
$68.00 ISO 15031-2:2010 Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 2: Guidance on terms, definitions, abbreviations and acronyms
$45.00 ISO 15031-3:2016 Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 3: Diagnostic connector and related electrical circuits: Specification and use
$149.00 ISO 15031-3:2004 Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 3: Diagnostic connector and related electrical circuits, specification and use
$162.00 ISO 15031-4:2014 Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 4: External test equipment
$232.00 ISO 15031-5:2015 Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 5: Emissions-related diagnostic services
$265.00 ISO 15031-5:2011 Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 5: Emissions-related diagnostic services
$103.00 ISO 15031-6:2015 Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 6: Diagnostic trouble code definitions
$123.00 ISO 15031-6:2010 Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 6: Diagnostic trouble code definitions
$45.00 ISO 15031-7:2013 Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 7: Data link security
$209.00 ISO 16183:2002 Heavy duty engines - Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions
$68.00 ISO 16232-1:2007 Road vehicles - Cleanliness of components of fluid circuits - Part 1: Vocabulary
$138.00 ISO 16232-10:2007 Road vehicles - Cleanliness of components of fluid circuits - Part 10: Expression of results
$103.00 ISO 16232-2:2007 Road vehicles - Cleanliness of components of fluid circuits - Part 2: Method of extraction of contaminants by agitation
$103.00 ISO 16232-3:2007 Road vehicles - Cleanliness of components of fluid circuits - Part 3: Method of extraction of contaminants by pressure rinsing
$103.00 ISO 16232-4:2007 Road vehicles - Cleanliness of components of fluid circuits - Part 4: Method of extraction of contaminants by ultrasonic techniques
$103.00 ISO 16232-5:2007 Road vehicles - Cleanliness of components of fluid circuits - Part 5: Method of extraction of contaminants on functional test bench
$68.00 ISO 16232-6:2007 Road vehicles - Cleanliness of components of fluid circuits - Part 6: Particle mass determination by gravimetric analysis
$138.00 ISO 16232-7:2007 Road vehicles - Cleanliness of components of fluid circuits - Part 7: Particle sizing and counting by microscopic analysis
$68.00 ISO 16232-8:2007 Road vehicles - Cleanliness of components of fluid circuits - Part 8: Particle nature determination by microscopic analysis
$103.00 ISO 16232-9:2007 Road vehicles - Cleanliness of components of fluid circuits - Part 9: Particle sizing and counting by automatic light extinction particle counter
$68.00 ISO 17479:2013 Motorcycles - Measurement methods for gaseous exhaust emissions during inspection or maintenance
$232.00 ISO 18854:2015 Small craft - Reciprocating internal combustion engines exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions
$68.00 ISO 19449:2015 Mopeds - Measurement methods for gaseous exhaust emissions during inspection or maintenance
$45.00 ISO 3929:2003 Road vehicles -- Measurement methods for exhaust gas emissions during inspection or maintenance
$209.00 ISO 6460-1:2007 Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - Part 1: General test requirements
$19.00 ISO 6460-1:2007/Amd1:2015 - Amendment 1
$209.00 ISO 6460-2:2014 Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - Part 2: Test cycles and specific test conditions
$139.00 ISO 6460-2:2007 Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - Part 2: Test cycles and specific test conditions
$103.00 ISO 6460-3:2007 Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - Part 3: Fuel consumption measurement at a constant speed
$19.00 ISO 6460-3:2007/Amd1:2015 - Amendment 1
$209.00 ISO 6855-1:2012 Mopeds - Measurement method for gaseous exhaust emissions and fuel consumption - Part 1: General test requirements
$103.00 ISO 6855-2:2012 Mopeds - Measurement method for gaseous exhaust emissions and fuel consumption - Part 2: Test cycles and specific test conditions
$103.00 ISO 6855-3:2012 Mopeds - Measurement method for gaseous exhaust emissions and fuel consumption - Part 3: Fuel consumption measurement at a constant speed
$68.00 ISO 789-4:1986 Agricultural tractors -- Test procedures -- Part 4: Measurement of exhaust smoke
$232.00 ISO 8178-1:2006 Reciprocating internal combustion engines - Exhaust emission measurement - Part 1: Test-bed measurement of gaseous and particulate exhaust emissions
$185.00 ISO 8178-10:2002 Reciprocating internal combustion engines - Exhaust emission measurement - Part 10: Test cycles and test procedures for field measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
$240.00 ISO 8178-11:2006 Reciprocating internal combustion engines - Exhaust emission measurement - Part 11: Test-bed measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions
$138.00 ISO 8178-2:2008 Reciprocating internal combustion engines - Exhaust emission measurement - Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions
$45.00 ISO 8178-3:1994 Reciprocating internal combustion engines - Exhaust emission measurement - Part 3: Definitions and methods of measurement of exhaust gas smoke under steady-state conditions
$138.00 ISO 8178-4:2007 Reciprocating internal combustion engines - Exhaust emission measurement - Part 4: Steady-state test cycles for different engine applications
$185.00 ISO 8178-5:2015 Reciprocating internal combustion engines - Exhaust emission measurement - Part 5: Test fuels
$200.00 ISO 8178-5:2008 Reciprocating internal combustion engines - Exhaust emission measurement - Part 5: Test fuels
$103.00 ISO 8178-6:2000 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 6: Report of measuring results and test
$45.00 ISO 8178-7:2015 Reciprocating internal combustion engines - Exhaust emission measurement - Part 7: Engine family determination
$51.00 ISO 8178-7:1996 Reciprocating internal combustion engines - Exhaust emission measurement - Part 7: Engine family determination
$45.00 ISO 8178-8:2015 Reciprocating internal combustion engines - Exhaust emission measurement - Part 8: Engine group determination
$51.00 ISO 8178-8:1996 Reciprocating internal combustion engines - Exhaust emission measurement - Part 8: Engine group determination
$209.00 ISO 8178-9:2012 Reciprocating internal combustion engines - Exhaust emission measurement - Part 9: Test cycles and test procedures for test bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
$200.00 ISO/PAS 3930:2009 Instruments for measuring vehicle exhaust emissions - Metrological and technical requirements; Metrological control and performance tests
$107.00 JIS B 8008-9:2004 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 9: Test cycles and test procedures for test-bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
$107.00 JIS D 1044:2001 Powered two-wheeled vehicles -- Measurement method of exhaust (tail pipe) gases from spark ignition engines
$232.00 ISO 8178-1:2017 Reciprocating internal combustion engines - Exhaust emission measurement - Part 1: Test-bed measurement systems of gaseous and particulate emissions
$232.00 ISO 8178-4:2017 Reciprocating internal combustion engines - Exhaust emission measurement - Part 4: Steady-state and transient test cycles for different engine applications