ISO 8992:2005 - $45.00   BUY NOW

Fasteners - General requirements for bolts, screws, studs and nuts

ISO 8992:2005 Publication Description:

ISO 8992:2005 specifies the general requirements for standardized bolts, screws, studs and nuts, but is also recommended for these non-standardized fasteners.

International Classification for Standards (ICS)

ICS Classification Field ICS Field Sub-Group and Number
ICS-21-Mechanical ICS Bolts Screws Studs (21.060.10)
ICS-21-Mechanical ICS Nuts (21.060.20)

ICS Related Standards

Cart Document Number Document Title
$45.00 ISO 10509:2012 Hexagon flange head tapping screws
$45.00 ISO 10510:2011 Tapping screw and washer assemblies with plain washers
$68.00 ISO 10642:2004 Hexagon socket countersunk head screws
$19.00 ISO 10642/Amd1:2012 Hexagon socket countersunk head screws - Amendment 1
$68.00 ISO 10664:2014 Hexalobular internal driving feature for bolts and screws
$77.00 ISO 10664:2005 Hexalobular internal driving feature for bolts and screws
$68.00 ISO 10666:1999 Drilling screws with tapping screw thread -- Mechanical and functional properties
$45.00 ISO 1207:2011 Slotted cheese head screws - Product grade A
$68.00 ISO 12474:2010 Hexagon socket head cap screws with metric fine pitch thread
$162.00 ISO 13918:2008 Welding - Studs and ceramic ferrules for arc stud welding
$68.00 ISO 14579:2011 Hexalobular socket head cap screws
$45.00 ISO 14580:2011 Hexalobular socket cheese head screws
$68.00 ISO 14581:2013 Fasteners - Hexalobular socket countersunk flat head screws
$45.00 ISO 14582:2013 Fasteners - Hexalobular socket countersunk head screws, high head
$45.00 ISO 14583:2011 Hexalobular socket pan head screws
$45.00 ISO 14584:2011 Hexalobular socket raised countersunk head screws
$45.00 ISO 14585:2011 Hexalobular socket pan head tapping screws
$45.00 ISO 14586:2011 Hexalobular socket countersunk head tapping screws
$45.00 ISO 14587:2011 Hexalobular socket raised countersunk (oval) head tapping screws
$45.00 ISO 1479:2011 Hexagon head tapping screws
$45.00 ISO 1481:2011 Slotted pan head tapping screws
$45.00 ISO 1482:2011 Slotted countersunk (flat) head tapping screws
$45.00 ISO 1483:2011 Slotted raised countersunk (oval) head tapping screws
$45.00 ISO 15065:2005 Countersinks for countersunk head screws with head configuration in accordance with ISO 7721
$68.00 ISO 15071:2011 Hexagon bolts with flange - Small series - Product grade A
$68.00 ISO 15072:2012 Hexagon bolts with flange with metric fine pitch thread - Small series - Product grade A
$45.00 ISO 15480:1999 Hexagon washer head drilling screws with tapping screw thread
$45.00 ISO 15481:1999 Cross recessed pan head drilling screws with tapping screw thread
$45.00 ISO 15482:1999 Cross recessed countersunk head drilling screws with tapping screw thread
$45.00 ISO 15483:1999 Cross recessed raised countersunk head drilling screws with tapping screw thread
$45.00 ISO 1580:2011 Slotted pan head screws - Product grade A
$45.00 ISO 2009:2011 Slotted countersunk flat head screws - Product grade A
$45.00 ISO 2010:2011 Slotted raised countersunk head screws - Product grade A
$209.00 ISO 225:2010 Fasteners - Bolts, screws, studs and nuts - Symbols and descriptions of dimensions
$45.00 ISO 2342:2003 Slotted headless screws with shank
$45.00 ISO 23429:2004 Gauging of hexagon sockets
$45.00 ISO 2702:2011 Heat-treated steel tapping screws - Mechanical properties
$162.00 ISO 3506-1:2009 Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs
$103.00 ISO 3506-3:2009 Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress
$103.00 ISO 3506-4:2009 Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws
$103.00 ISO 4014:2011 Hexagon head bolts - Product grades A and B
$45.00 ISO 4015:1979 Hexagon head bolts - Product grade B - Reduced shank (shank diameter approximately equal to pitch diameter)
$68.00 ISO 4016:2011 Hexagon head bolts - Product grade C
$68.00 ISO 4017:2014 Fasteners - Hexagon head screws - Product grades A and B
$88.00 ISO 4017:2011 Hexagon head screws - Product grades A and B
$68.00 ISO 4018:2011 Hexagon head screws - Product grade C
$45.00 ISO 4026:2003 Hexagon socket set screws with flat point
$45.00 ISO 4027:2003 Hexagon socket set screws with cone point
$45.00 ISO 4028:2003 Hexagon socket set screws with dog point
$45.00 ISO 4029:2003 Hexagon socket set screws with cup point
$68.00 ISO 4162:2012 Hexagon bolts with flange - Small series - Product grade A with driving feature of product grade B
$68.00 ISO 4757:1983 Cross recesses for screws
$209.00 ISO 4759-1:2000 Tolerances for fasteners -- Part 1: Bolts, screws, studs and nuts -- Product grades A, B and C
$68.00 ISO 4762:2004 Hexagon socket head cap screws
$45.00 ISO 4766:2011 Slotted set screws with flat point
$68.00 ISO 6157-1:1988 Fasteners - Surface discontinuities - Part 1: Bolts, screws and studs for general requirements
$103.00 ISO 6157-3:1988 Fasteners - Surface discontinuities - Part 3: Bolts, screws and studs for special requirements
$45.00 ISO 7045:2011 Pan head screws with type H or type Z cross recess - Product grade A
$45.00 ISO 7046-1:2011 Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 1: Steel screws of property class 4.8
$45.00 ISO 7046-2:2011 Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws
$45.00 ISO 7047:2011 Raised countersunk head screws (common head style) with type H or type Z cross recess - Product grade A
$45.00 ISO 7048:2011 Cross-recessed cheese head screws
$45.00 ISO 7049:2011 Cross-recessed pan head tapping screws
$45.00 ISO 7050:2011 Cross-recessed countersunk (flat) head tapping screws
$45.00 ISO 7051:2011 Cross-recessed raised countersunk (oval) head tapping screws
$45.00 ISO 7053:2011 Hexagon washer head tapping screws
$45.00 ISO 7378:1983 Fasteners - Bolts, screws and studs - Split pin holes and wire holes
$45.00 ISO 7379:1983 Hexagon socket head shoulder screws
$68.00 ISO 7380-1:2011 Button head screws - Part 1: Hexagon socket button head screws
$68.00 ISO 7380-2:2011 Button head screws - Part 2: Hexagon socket button head screws with collar
$45.00 ISO 7434:1983 Slotted set screws with cone point
$45.00 ISO 7435:1983 Slotted set screws with long dog point
$45.00 ISO 7436:1983 Slotted set screws with cup point
$45.00 ISO 7721:1983 Countersunk head screws - Head configuration and gauging
$45.00 ISO 7721-2:1990 Countersunk flat head screws - Part 2: Penetration depth of cross recesses
$68.00 ISO 8676:2011 Hexagon head screws with metric fine pitch thread - Product grades A and B
$45.00 ISO 8678:1988 Cup head square neck bolts with small head and short neck - Product grade B
$68.00 ISO 8765:2011 Hexagon head bolts with metric fine pitch thread - Product grades A and B
$51.00 ISO 8839:1986 Mechanical properties of fasteners - Bolts, screws, studs and nuts made of non-ferrous metals
$45.00 ISO 885:2000 General purpose bolts and screws - Metric series - Radii under the head
$45.00 ISO 888:2012 Fasteners - Bolts, screws and studs - Nominal lengths and thread lengths
$209.00 ISO 898-1:2013 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread
$103.00 ISO 898-5:2012 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread
$45.00 ISO 898-7:1992 Mechanical properties of fasteners - Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm
$51.00 JIS B 1007:2003 Tapping screws thread
$39.00 JIS B 1015:2008 Hexalobular internal driving feature for bolts and screws
$203.00 JIS B 1021:2003 Tolerances for fasteners -- Part 1: Bolts, screws, studs and nuts -- Product grades A, B and C
$68.00 JIS B 1041:1993 Fasteners -- Surface discontinuities -- Part 1: Bolts, screws and studs for general requirements
$107.00 JIS B 1043:1993 Fasteners -- Surface discontinuities -- Part 3: Bolts, screws and studs for special requirements
$290.00 JIS B 1051:2014 Mechanical properties of fasteners made of carbon steel and alloy steel -- Bolts, screws and studs with specified property classes -- Coarse thread and fine pitch thread
$60.00 JIS B 1051:2000 Mechanical properties of fasteners made of carbon steel and alloy steel -- Part 1: Bolts, screws and studs
$28.00 JIS B 1053:1999 Mechanical properties of fasteners made of carbon steel and alloy steel -- Part 5: Set screws and similar threaded fasteners not under tensile stresses
$155.00 JIS B 1054-1:2013 Mechanical properties of corrosion-resistant stainless steel fasteners -- Part 1: Bolts, screws and studs
$107.00 JIS B 1054-3:2013 Mechanical properties of corrosion-resistant stainless steel fasteners -- Part 3: Set screws and similar fasteners not under tensile stress
$49.00 JIS B 1057:2001 Mechanical properties of non-ferrous metal fasteners
$49.00 JIS B 1058:1995 Mechanical properties of fasteners Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm
$68.00 JIS B 1059:2001 Drilling screws with tapping screw thread -- Mechanical and functional properties
$39.00 JIS B 1060:2003 Mechanical and performance requirements of case hardened and tempered metric thread rolling screws
$49.00 JIS B 1099:2012 Fasteners -- General requirements for bolts, screws, studs and nuts
$107.00 JIS B 1124:2015 Drilling screws with tapping screw thread
$59.00 JIS B 1124:2003 Drilling screws with tapping screw thread
$58.00 JIS B 1125:2015 Self drilling tapping screws
$51.00 JIS B 1125:2003 Self drilling tapping screws
$58.00 JIS B 1126:2015 Hexagon washer head tapping screws
$34.00 JIS B 1126:2009 Hexagon washer head tapping screws
$49.00 JIS B 1127:2015 Hexagon flange head tapping screws
$34.00 JIS B 1127:2009 Hexagon flange head tapping screws
$49.00 JIS B 1128:2004 Hexalobular socket head tapping screws
$29.00 JIS B 1129:2004 Tapping screw washer assemblies with plain washers
$39.00 JIS B 1166:2009 T-Slot bolts
$39.00 JIS B 1168:1994 Eyebolts
$29.00 JIS B 1171:2005 Cup head square neck bolts
$39.00 JIS B 1174:2006 Hexagon socket button head screws
$87.00 JIS B 1176:2014 Hexagon socket head cap screws
$145.00 JIS B 1180:2014 Hexagon head bolts and hexagon head screws
$58.00 JIS B 1182:2009 Square head bolts
$87.00 JIS B 1189:2014 Hexagon bolts with flange
$60.00 JIS B 1189:2005 Hexagon flange bolts
$107.00 JIS B 1192:2013 Ball screws
$49.00 JIS B 1194:2006 Hexagon socket countersunk head screws
$10.00 JIS B 1217:2009/AMENDMENT 1:2012 Bolting for use with pipe flanges (Amendment 1)
$49.00 JIS B 7141:2012 Microscopes -- Screw threads for objectives and related nosepieces
$107.00 JIS E 1107:2008 Steel bolts and nuts for fish-plates and fastenings
$45.00 ISO 10484:1997 Widening test on nuts
$45.00 ISO 10511:2012 Prevailing torque type hexagon thin nuts (with non-metallic insert)
$45.00 ISO 10512:2012 Prevailing torque type hexagon regular nuts (with non-metallic insert) with metric fine pitch thread - Property classes 6, 8 and 10
$45.00 ISO 10513:2012 Prevailing torque type all-metal hexagon high nuts with metric fine pitch thread - Property classes 8, 10 and 12
$45.00 ISO 10663:2012 Hexagon nuts with flange, style 2 - Fine pitch thread
$45.00 ISO 12125:2012 Prevailing torque type hexagon nuts with flange (with non-metallic insert) with metric fine pitch thread, style 2 - Product grades A and B
$45.00 ISO 12126:2012 Prevailing torque type all-metal hexagon nuts with flange with metric fine pitch thread, style 2 - Product grades A and B
$103.00 ISO/TR 16224:2012 Technical aspects of nut design
$45.00 ISO 21670:2014 Fasteners - Hexagon weld nuts with flange
$138.00 ISO 2320:2015 Fasteners - Prevailing torque steel nuts - Functional properties
$149.00 ISO 2320:2008 Prevailing torque type steel nuts - Mechanical and performance properties
$138.00 ISO 3506-2:2009 Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts
$45.00 ISO 4032:2012 Hexagon regular nuts (style 1) - Product grades A and B
$45.00 ISO 4033:2012 Hexagon high nuts (style 2) - Product grades A and B
$45.00 ISO 4034:2012 Hexagon regular nuts (style 1) - Product grade C
$45.00 ISO 4035:2012 Hexagon thin nuts chamfered (style 0) - Product grades A and B
$51.00 ISO 4036:2012 Hexagon thin nuts unchamfered (style 0) - Product grade B
$68.00 ISO 4161:2012 Hexagon nuts with flange, style 2 - Coarse thread
$209.00 ISO 4759-1:2000 Tolerances for fasteners -- Part 1: Bolts, screws, studs and nuts -- Product grades A, B and C
$68.00 ISO 6157-2:1995 Fasteners - Surface discontinuities - Part 2: Nuts
$45.00 ISO 7040:2012 Prevailing torque type hexagon regular nuts (with non-metallic insert) - Property classes 5, 8 and 10
$45.00 ISO 7041:2012 Prevailing torque type hexagon nuts (with non-metallic insert), style 2 - Property classes 9 and 12
$45.00 ISO 7042:2012 Prevailing torque type all-metal hexagon high nuts - Property classes 5, 8, 10 and 12
$68.00 ISO 7043:2012 Prevailing torque type hexagon nuts with flange (with non-metallic insert), style 2 - Product grades A and B
$68.00 ISO 7044:2012 Prevailing torque type all-metal hexagon nuts with flange, style 2 - Product grades A and B
$45.00 ISO 7719:2012 Prevailing torque type all-metal hexagon regular nuts - Property classes 5, 8 and 10
$45.00 ISO 7720:2012 Prevailing torque type all-metal hexagon nuts, style 2 - Property class 9
$45.00 ISO 8673:2012 Hexagon regular nuts (style 1) with metric fine pitch thread - Product grades A and B
$45.00 ISO 8674:2012 Hexagon high nuts (style 2) with metric fine pitch thread - Product grades A and B
$45.00 ISO 8675:2012 Hexagon thin nuts chamfered (style 0) with metric fine pitch thread - Product grades A and B
$51.00 ISO 8839:1986 Mechanical properties of fasteners - Bolts, screws, studs and nuts made of non-ferrous metals
$138.00 ISO 898-2:2012 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes - Coarse thread and fine pitch thread
$203.00 JIS B 1021:2003 Tolerances for fasteners -- Part 1: Bolts, screws, studs and nuts -- Product grades A, B and C
$68.00 JIS B 1042:1998 Fasteners -- Surface discontinuities -- Part 2: Nuts
$77.00 JIS B 1052-2:2009 Mechanical properties of fasteners -- Part 2: Nuts with specified proof load values -- Coarse thread
$136.00 JIS B 1054-2:2013 Mechanical properties of corrosion-resistant stainless steel fasteners -- Part 2: Nuts
$29.00 JIS B 1085:1995 Cone proof load test on nuts
$49.00 JIS B 1086:1998 Widening test on nuts
$49.00 JIS B 1099:2012 Fasteners -- General requirements for bolts, screws, studs and nuts
$39.00 JIS B 1163:2009 Square nuts
$39.00 JIS B 1167:2011 T-Slot nuts
$58.00 JIS B 1170:2011 Hexagon slotted and castle nuts
$107.00 JIS B 1181:2014 Hexagon nuts and hexagon thin nuts
$39.00 JIS B 1183:2010 Domed cap nuts
$87.00 JIS B 1190:2014 Hexagon nuts with flange
$56.00 JIS B 1190:2005 Hexagon nuts with flange
$58.00 JIS B 1196:2010 Weld nuts
$49.00 JIS B 1199-1:2001 Prevailing torque type nuts -- Part 1: Hexagon nuts with non-metallic insert
$49.00 JIS B 1199-2:2001 Prevailing torque type nuts -- Part 2: All-metal hexagon nuts
$58.00 JIS B 1199-3:2001 Prevailing torque type nuts -- Part 3: Hexagon nuts with flange with non-metallic insert
$58.00 JIS B 1199-4:2001 Prevailing torque type nuts -- Part 4: All-metal hexagon nuts with flange
$10.00 JIS B 1217:2009/AMENDMENT 1:2012 Bolting for use with pipe flanges (Amendment 1)
$107.00 JIS E 1107:2008 Steel bolts and nuts for fish-plates and fastenings