ISO 7326:2006 - $88.00   BUY NOW

Rubber and plastics hoses - Assessment of ozone resistance under static conditions

ISO 7326:2006 Publication Description:

ISO 7326:2006 specifies five methods for determining the ozone resistance of the outer covers of hoses:

  • method 1, for bore sizes up to and including 25 mm, carried out on the hose itself;
  • method 2, for bore sizes greater than 25 mm, carried out on a test piece from the hose wall;
  • method 3, for bore sizes greater than 25 mm, carried out on a test piece from the cover;
  • method 4, for all bore sizes, carried out on the hose itself;
  • method 5, for all bore sizes, carried out on hoses that are expandable, for example textile-reinforced hoses.

International Classification for Standards (ICS)

ICS Classification Field ICS Field Sub-Group and Number
ICS-23-Fluid ICS Hoses/Hose Assemblies (23.040.70)

ICS Related Standards

Cart Document Number Document Title
$185.00 ISO 10380:2012 Pipework - Corrugated metal hoses and hose assemblies
$68.00 ISO 10619-1:2011 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 1: Bending tests at ambient temperature
$68.00 ISO 10619-2:2011 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures
$45.00 ISO 10619-3:2011 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures
$138.00 ISO 10806:2003 Pipework - Fittings for corrugated metal hoses
$45.00 ISO 10960:1994 Rubber and plastics hoses - Assessment of ozone resistance under dynamic conditions
$103.00 ISO 12151-1:2010 Connections for hydraulic fluid power and general use - Hose fittings - Part 1: Hose fittings with ISO 8434-3 O-ring face seal ends
$19.00 ISO 12151-1:2010/Amd1:2017 - Amendment 1
$103.00 ISO 12151-2:2003 Connections for hydraulic fluid power and general use - Hose fittings - Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24 degree cone connector ends with O-rings
$68.00 ISO 12151-3:2010 Connections for hydraulic fluid power and general use - Hose fittings - Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends
$68.00 ISO 12151-4:2007 Connections for hydraulic fluid power and general use - Hose fittings - Part 4: Hose fittings with ISO 6149 metric stud ends
$68.00 ISO 12151-5:2007 Connections for hydraulic fluid power and general use - Hose fittings - Part 5: Hose fittings with ISO 8434-2 37 degree flared ends
$68.00 ISO 12151-6:2009 Connections for hydraulic fluid power and general use - Hose fittings - Part 6: Hose fittings with ISO 8434-6 60 degree cone ends
$45.00 ISO 1307:2006 Rubber and plastics hoses - Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses
$68.00 ISO 1402:2009 Rubber and plastics hoses and hose assemblies - Hydrostatic testing
$45.00 ISO 1403:2005 Rubber hoses, textile-reinforced, for general-purpose water applications - Specification
$123.00 ISO 15348:2002 Pipework - Metal bellows expansion joints - General
$103.00 ISO 15465:2004 Pipework - Stripwound metal hoses and hose assemblies
$138.00 ISO 17165-1:2007 Hydraulic fluid power - Hose assemblies - Part 1: Dimensions and requirements
$103.00 ISO/TS 17165-2:2013 Hydraulic fluid power - Hose assemblies - Part 2: Practices for hydraulic hose assemblies
$209.00 ISO/TR 17784:2003 Rubber and plastics hoses and hose assemblies - Guide for use by purchasers, assemblers, installers and operating personnel
$103.00 ISO 18752:2014 Rubber hoses and hose assemblies - Wire- or textile-reinforced single-pressure types for hydraulic applications - Specification
$68.00 ISO 2398:2016 Rubber hoses, textile-reinforced, for compressed air - Specification
$51.00 ISO 2398:2006 Rubber hoses, textile-reinforced, for compressed air - Specification
$45.00 ISO 28702:2008 Rubber and plastics hoses and tubing - Textile-reinforced types - Sub-ambient temperature crush test
$138.00 ISO 30013:2011 Rubber and plastics hoses - Methods of exposure to laboratory light sources - Determination of changes in colour, appearance and other physical properties
$103.00 ISO 3994:2014 Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification
$108.00 ISO 3994:2007 Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification
$68.00 ISO 4023:2009 Rubber hoses and hose assemblies for steam - Test methods
$68.00 ISO 4080:2009 Rubber and plastics hoses and hose assemblies - Determination of permeability to gas
$68.00 ISO 4641:2016 Rubber hoses and hose assemblies for water suction and discharge - Specification
$88.00 ISO 4641:2010 Rubber hoses and hose assemblies for water suction and discharge - Specification
$68.00 ISO 4671:2007 Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies
$19.00 ISO 4671/Amd1:2011 Rubber and plastics hose and hose assemblies - Methods of measurement of dimensions - Amendment 1: Clarification of position at which outside diameter is measured
$103.00 ISO 5774:2016 Plastics hoses - Textile-reinforced types for compressed-air applications - Specification
$123.00 ISO 5774:2006 Plastics hoses - Textile-reinforced types for compressed-air applications - Specification
$68.00 ISO 6134:2017 Rubber hoses and hose assemblies for saturated steam - Specification
$123.00 ISO 6134:2005 Rubber hoses and hose assemblies for saturated steam - Specification
$68.00 ISO 6224:2011 Thermoplastics hoses, textile-reinforced, for general-purpose water applications - Specification
$45.00 ISO 6801:1983 Rubber or plastics hoses - Determination of volumetric expansion
$19.00 ISO 6801/Amd1:2011 Rubber or plastics hoses - Determination of volumetric expansion - Amendment 1: Deletion of alcohol as pressurizing fluid
$45.00 ISO 6802:2005 Rubber and plastics hoses and hose assemblies with wire reinforcements - Hydraulic impulse test with flexing
$45.00 ISO 6803:2008 Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing
$45.00 ISO 7233:2016 Rubber and plastics hoses and hose assemblies - Determination of resistance to vacuum
$51.00 ISO 7233:2006 Rubber and plastics hoses and hose assemblies - Determination of resistance to vacuum
$68.00 ISO 7326:2016 Rubber and plastics hoses - Assessment of ozone resistance under static conditions
$103.00 ISO 7369:2004 Pipework - Metal hoses and hose assemblies - Vocabulary
$45.00 ISO 7662:1988 Rubber and plastics hoses - Determination of abrasion of lining
$45.00 ISO 7751:2016 Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to maximum working pressure
$51.00 ISO 7751:1991 Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to design working pressure
$22.00 ISO 7751/Amd1:2011 Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to design working pressure - Amendment 1: Replacement of design working pressure by maximum working pressure throughout text
$103.00 ISO 8029:2014 Plastics hose - General-purpose collapsible water hose, textile-reinforced - Specification
$99.00 ISO 8029:2007 Plastics hose - General-purpose collapsible water hose, textile-reinforced - Specification
$68.00 ISO 8030:2014 Rubber and plastics hoses - Method of test for flammability
$58.00 ISO 8030:1995 Rubber and plastics hoses - Method of test for flammability
$103.00 ISO 8031:2009 Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity
$45.00 ISO 8032:1997 Rubber and plastics hose assemblies - Flexing combined with hydraulic impulse test (half-omega test)
$103.00 ISO 8033:2016 Rubber and plastics hoses - Determination of adhesion between components
$88.00 ISO 8033:2006 Rubber and plastics hoses - Determination of adhesion between components
$68.00 ISO 8308:2015 Rubber and plastics hoses and tubing - Determination of transmission of liquids through hose and tubing walls
$88.00 ISO 8308:2006 Rubber and plastics hoses and tubing - Determination of transmission of liquids through hose and tubing walls
$45.00 ISO 8330:2014 Rubber and plastics hoses and hose assemblies - Vocabulary
$103.00 ISO 8331:2016 Rubber and plastics hoses and hose assemblies - Guidelines for selection, storage, use and maintenance
$123.00 ISO 8331:2014 Rubber and plastics hoses and hose assemblies - Guidelines for selection, storage, use and maintenance
$49.00 JIS K 6330-7:2011 Rubber and plastics hoses -- Part 7: Assessment of ozone resistance under static conditions
$68.00 ISO 6803:2017 Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing
$103.00 ISO 19385:2017 Rubber and plastics hoses and hose assemblies, wire- or textile-reinforced, for water jetting or water blasting applications - Specification