ISO 6944-1:2008/Amd1:2015 - $19.00   BUY NOW

- Amendment 1

ISO 6944-1:2008/Amd1:2015 Publication Description:

--- Abstract Source: ISO 6944-1:2008/Amd1:2015 ---

ISO 6944-1:2008 specifies a method for determining the fire resistance of vertical and horizontal ventilation ducts under standardized fire conditions. The test examines the behaviour of ducts exposed to fire from the outside (duct A) and fire inside the duct (duct B). It is intended that ISO 6944-1:2008 be used in conjunction with ISO 834-1.

ISO 6944-1:2008 is not applicable to ducts whose fire resistance depends on the fire resistance performance of a ceiling, ducts containing fire dampers at points where they pass through fire separations, doors of inspection openings, unless included in the duct to be tested, two- or three-sided ducts, or the fixing of suspension devices to floors or walls.

General guidance and background information are provided.

International Classification for Standards (ICS)

ICS Classification Field ICS Field Sub-Group and Number
ICS-13-Environment ICS Fire Resistance-Building Materials (13.220.50)
ICS-91-Construction ICS Ventilation/Air-Conditioning (91.140.30)

ICS Related Standards

Cart Document Number Document Title
$103.00 ISO 10294-1:1996 Fire resistance tests - Fire dampers for air distribution systems - Part 1: Test method
$19.00 ISO 10294-1:1996/Amd1:2014 - Amendment 1
$45.00 ISO 10294-2:1999 Fire resistance tests -- Fire dampers for air distribution systems -- Part 2: Classification, criteria and field of application of test results
$68.00 ISO 10294-3:1999 Fire resistance tests -- Fire dampers for air distribution systems -- Part 3: Guidance on the test method
$68.00 ISO 10294-4:2001 Fire resistance tests -- Fire dampers for air distribution systems -- Part 4: Test of thermal release mechanism
$19.00 ISO 10294-4:2001/Amd1:2014 - Amendment 1: Specific performance requirement for thermal release mechanism based upon performance of thermal release mechanism used in ISO 10294-1 test specimen
$138.00 ISO 10294-5:2005 Fire resistance tests - Fire dampers for air distribution systems - Part 5: Intumescent fire dampers
$103.00 ISO 10295-1:2007 Fire tests for building elements and components - Fire testing of service installations - Part 1: Penetration seals
$138.00 ISO 10295-2:2009 Fire tests for building elements and components - Fire testing of service installations - Part 2: Linear joint (gap) seals
$103.00 ISO/TR 10295-3:2012 Fire tests for building elements and components - Fire testing of service installations - Part 3: Single component penetration seals - Guidance on the construction and use of test configurations and simulated services to characterise sealing materials
$185.00 ISO/TR 11696-1:1999 Uses of reaction to fire test results -- Part 1: Application of test results to predict fire performance of internal linings and other building products
$162.00 ISO/TR 11696-2:1999 Uses of reaction to fire test results -- Part 2: Fire hazard assessment of construction products
$162.00 ISO 1182:2010 Reaction to fire tests for products - Non-combustibility test
$162.00 ISO/TR 11925-1:1999 Reaction to fire tests -- Ignitability of building products subjected to direct impringement of flame -- Part 1: Guidance on ignitability
$138.00 ISO 11925-2:2010 Reaction to fire tests - Ignitability of products subjected to direct impingement of flame - Part 2: Single-flame source test
$138.00 ISO 11925-3:1997 Reaction to fire tests - Ignitability of building products subjected to direct impingement of flame - Part 3: Multi-source test
$185.00 ISO 12136:2011 Reaction to fire tests - Measurement of material properties using a fire propagation apparatus
$138.00 ISO 12468-1:2013 External exposure of roofs to fire - Part 1: Test method
$45.00 ISO 12468-2:2013 External exposure of roofs to fire - Part 2: Classification of roofs
$68.00 ISO/TR 12468-3:2014 External exposure of roofs to fire - Part 3: Commentary
$209.00 ISO/TR 12471:2004 Computational structural fire design - Review of calculation models, fire tests for determining input material data and needs for further development
$68.00 ISO 12472:2003 Fire resistance of timber door assemblies - Method of determining the efficacy of intumescent seals
$138.00 ISO 12949:2011 Standard test method for measuring the heat release rate of low flammability mattresses and mattress sets
$162.00 ISO 13784-1:2014 Reaction to fire test for sandwich panel building systems - Part 1: Small room test
$103.00 ISO 13784-2:2002 Reaction-to-fire tests for sandwich panel building systems - Part 2: Test method for large rooms
$68.00 ISO 13785-1:2002 Reaction-to-fire tests for facades - Part 1: Intermediate-scale test
$103.00 ISO 13785-2:2002 Reaction-to-fire tests for facades - Part 2: Large-scale test
$209.00 ISO 14696:2009 Reaction-to-fire tests - Determination of fire and thermal parameters of materials, products and assemblies using an intermediate-scale calorimeter (ICAL)
$45.00 ISO 14697:2007 Reaction-to-fire tests - Guidance on the choice of substrates for building and transport products
$103.00 ISO 14934-1:2010 Fire tests - Calibration and use of heat flux meters - Part 1: General principles
$185.00 ISO 14934-2:2013 Fire tests - Calibration and use of heat flux meters - Part 2: Primary calibration methods
$103.00 ISO 14934-3:2012 Fire tests - Calibration and use of heat flux meters - Part 3: Secondary calibration method
$138.00 ISO 14934-4:2014 Fire tests - Calibration and use of heat flux meters - Part 4: Guidance on the use of heat flux meters in fire tests
$132.00 ISO/TS 14934-4:2007 Fire tests - Calibration of heat flux meters - Part 4: Guidance on the use of heat flux meters in fire tests
$138.00 ISO 1716:2010 Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value)
$209.00 ISO/TR 17252:2008 Fire tests - Applicability of reaction to fire tests to fire modelling and fire safety engineering
$103.00 ISO/TS 17431:2006 Fire tests- Reduced-scale model box test
$138.00 ISO 17554:2014 Reaction to fire tests - Mass loss measurement
$123.00 ISO 17554:2005 Reaction to fire tests - Mass loss measurement
$162.00 ISO 20632:2008 Reaction-to-fire tests - Small room test for pipe insulation products or systems
$103.00 ISO/TS 22269:2005 Reaction to fire tests - Fire growth - Full-scale test for stairs and stair coverings
$209.00 ISO/TR 22898:2006 Review of outputs for fire containment tests for buildings in the context of fire safety engineering
$185.00 ISO 22899-1:2007 Determination of the resistance to jet fires of passive fire protection materials - Part 1: General requirements
$103.00 ISO/TR 22899-2:2013 Determination of the resistance to jet fires of passive fire protection - Part 2: Guidance on classification and implementation methods
$162.00 ISO 24473:2008 Fire tests - Open calorimetry - Measurement of the rate of production of heat and combustion products for fires of up to 40 MW
$185.00 ISO 3008:2007 Fire-resistance tests - Door and shutter assemblies
$138.00 ISO 3008-2:2014 Fire-resistance tests - Part 2: Lift landing door assemblies
$103.00 ISO 3008-3:2016 Fire resistance tests - Part 3: Door and shutter assemblies horizontally oriented
$138.00 ISO 3009:2003 Fire-resistance tests - Elements of building construction - Glazed elements
$138.00 ISO/TS 3814:2014 Standard tests for measuring reaction-to-fire of products and materials - Their development and application
$185.00 ISO 5657:1997 Reaction to fire tests - Ignitability of building products using a radiant heat source
$162.00 ISO/TS 5658-1:2006 Reaction to fire tests - Spread of flame - Part 1: Guidance on flame spread
$162.00 ISO 5658-2:2006 Reaction to fire tests - Spread of flame - Part 2: Lateral spread on building and transport products in vertical configuration
$19.00 ISO 5658-2/Amd1:2011 Reaction to fire tests - Spread of flame - Part 2: Lateral spread on building products in vertical configuration - Amendment 1
$185.00 ISO 5658-4:2001 Reaction to fire tests -- Spread of flame -- Part 4: Intermediate-scale test of vertical spread of flame with vertically oriented specimen
$209.00 ISO 5660-1:2015 Reaction-to-fire tests - Heat release, smoke production and mass loss rate - Part 1: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement)
$200.00 ISO 5660-1:2002 Reaction-to-fire tests - Heat release, smoke production and mass loss rate - Part 1: Heat release rate (cone calorimeter method)
$123.00 ISO 5660-2:2002 Reaction-to-fire tests - Heat release, smoke production and mass loss rate - Part 2: Smoke production rate (dynamic measurement)
$185.00 ISO/TS 5660-3:2012 Reaction-to-fire tests - Heat release, smoke production and mass loss rate - Part 3: Guidance on measurement
$162.00 ISO/TS 5660-4:2016 Reaction-to-fire tests - Heat release, smoke production and mass loss rate - Part 4: Measurement of low levels of heat release
$68.00 ISO 5925-1:2007 Fire tests - Smoke-control door and shutter assemblies - Part 1: Ambient- and medium-temperature leakage tests
$19.00 ISO 5925-1:2007/Amd1:2015 - Amendment 1
$68.00 ISO/TR 5925-2:2006 Fire tests - Smoke-control door and shutter assemblies - Part 2: Commentary on test method and the applicability of test conditions and the use of test data in a smoke containment strategy
$162.00 ISO 6944-1:2008 Fire containment - Elements of building construction - Part 1: Ventilation ducts
$103.00 ISO 6944-2:2009 Fire containment - Elements of building construction - Part 2: Kitchen extract ducts
$138.00 ISO 834-1:1999 Fire-resistance tests -- Elements of building construction -- Part 1: General requirements
$209.00 ISO 834-10:2014 Fire resistance tests - Elements of building construction - Part 10: Specific requirements to determine the contribution of applied fire protection materials to structural steel elements
$209.00 ISO 834-11:2014 Fire resistance tests - Elements of building construction - Part 11: Specific requirements for the assessment of fire protection to structural steel elements
$68.00 ISO 834-12:2012 Fire resistance tests - Elements of building construction - Part 12: Specific requirements for separating elements evaluated on less than full scale furnaces
$19.00 ISO 834-1/Amd1:2012 Fire-resistance tests - Elements of building construction - Part 1: General requirements - Amendment 1
$103.00 ISO/TR 834-2:2009 Fire-resistance tests - Elements of building construction - Part 2: Guidance on measuring uniformity of furnace exposure on test samples
$138.00 ISO/TR 834-3:2012 Fire-resistance tests - Elements of building construction - Part 3: Commentary on test method and guide to the application of the outputs from the fire-resistance test
$68.00 ISO 834-4:2000 Fire-resistance tests -- Elements of building construction -- Part 4: Specific requirements for loadbearing vertical separating elements
$68.00 ISO 834-5:2000 Fire-resistance tests -- Elements of building construction -- Part 5: Specific requirements for loadbearing horizontal separating elements
$68.00 ISO 834-6:2000 Fire-resistance tests -- Elements of building construction -- Part 6: Specific requirements for beams
$68.00 ISO 834-7:2000 Fire-resistance tests -- Elements of building construction -- Part 7: Specific requirements for columns
$68.00 ISO 834-8:2002 Fire-resistance tests - Elements of building construction - Part 8: Specific requirements for non-loadbearing vertical separating elements
$68.00 ISO 834-9:2003 Fire-resistance tests - Elements of building construction - Part 9: Specific requirements for non-loadbearing ceiling elements
$173.00 ISO 9705:1993 Fire tests - Full-scale room test for surface products
$185.00 ISO 9705-1:2016 Reaction to fire tests - Room corner test for wall and ceiling lining products - Part 1: Test method for a small room configuration
$185.00 ISO/TR 9705-2:2001 Reaction-to-fire tests -- Full-scale room tests for surface products -- Part 2: Technical background and guidance
$138.00 ISO 3008-2:2017 Fire-resistance tests - Part 2: Lift landing door assemblies
$185.00 ISO 10121-1:2014 Test method for assessing the performance of gas-phase air cleaning media and devices for general ventilation - Part 1: Gas-phase air cleaning media
$185.00 ISO 10121-2:2013 Test methods for assessing the performance of gas-phase air cleaning media and devices for general ventilation - Part 2: Gas-phase air cleaning devices (GPACD)
$103.00 ISO 10294-1:1996 Fire resistance tests - Fire dampers for air distribution systems - Part 1: Test method
$19.00 ISO 10294-1:1996/Amd1:2014 - Amendment 1
$45.00 ISO 10294-2:1999 Fire resistance tests -- Fire dampers for air distribution systems -- Part 2: Classification, criteria and field of application of test results
$68.00 ISO 10294-3:1999 Fire resistance tests -- Fire dampers for air distribution systems -- Part 3: Guidance on the test method
$68.00 ISO 10294-4:2001 Fire resistance tests -- Fire dampers for air distribution systems -- Part 4: Test of thermal release mechanism
$19.00 ISO 10294-4:2001/Amd1:2014 - Amendment 1: Specific performance requirement for thermal release mechanism based upon performance of thermal release mechanism used in ISO 10294-1 test specimen
$138.00 ISO 10294-5:2005 Fire resistance tests - Fire dampers for air distribution systems - Part 5: Intumescent fire dampers
$68.00 ISO 15858:2016 UV-C Devices - Safety information - Permissible human exposure
$68.00 ISO 15957:2015 Test dusts for evaluating air cleaning equipment
$185.00 ISO 16170:2016 In situ test methods for high efficiency filter systems in industrial facilities
$162.00 ISO 16890-1:2016 Air filters for general ventilation - Part 1: Technical specifications, requirements and classification system based upon particulate matter efficiency (ePM)
$209.00 ISO 16890-2:2016 Air filters for general ventilation - Part 2: Measurement of fractional efficiency and air flow resistance
$138.00 ISO 16890-3:2016 Air filters for general ventilation - Part 3: Determination of the gravimetric efficiency and the air flow resistance versus the mass of test dust captured
$68.00 ISO 16890-4:2016 Air filters for general ventilation - Part 4: Conditioning method to determine the minimum fractional test efficiency
$185.00 ISO 16891:2016 Test methods for evaluating degradation of characteristics of cleanable filter media
$185.00 ISO 29462:2013 Field testing of general ventilation filtration devices and systems for in situ removal efficiency by particle size and resistance to airflow
$103.00 ISO 29463-1:2011 High-efficiency filters and filter media for removing particles in air - Part 1: Classification, performance testing and marking
$138.00 ISO 29463-2:2011 High-efficiency filters and filter media for removing particles in air - Part 2: Aerosol production, measuring equipment and particle-counting statistics
$138.00 ISO 29463-3:2011 High-efficiency filters and filter media for removing particles in air - Part 3: Testing flat sheet filter media
$185.00 ISO 29463-4:2011 High-efficiency filters and filter media for removing particles in air - Part 4: Test method for determining leakage of filter elements-Scan method
$138.00 ISO 29463-5:2011 High-efficiency filters and filter media for removing particles in air - Part 5: Test method for filter elements
$138.00 ISO 29464:2011 Cleaning equipment for air and other gases - Terminology
$51.00 ISO 6242-2:1992 Building construction -- Expression of users requirements -- Part 2: Air purity requirements'
$51.00 ISO 6584:1981 Cleaning equipment for air and other gases -- Classification of dust separators
$162.00 ISO 6944-1:2008 Fire containment - Elements of building construction - Part 1: Ventilation ducts
$103.00 ISO 6944-2:2009 Fire containment - Elements of building construction - Part 2: Kitchen extract ducts
$107.00 JIS A 4009:1997 Components of air duct
$162.00 ISO 29464:2017 Cleaning of air and other gases - Terminology
$103.00 ISO 29463-1:2017 High efficiency filters and filter media for removing particles from air - Part 1: Classification, performance, testing and marking