ISO 6855-3:2012 - $103.00   BUY NOW

Mopeds - Measurement method for gaseous exhaust emissions and fuel consumption - Part 3: Fuel consumption measurement at a constant speed

ISO 6855-3:2012 Publication Description:

ISO 6855-3 specifies the methods of measurement for fuel consumption at a constant speed on the road and on the chassis dynamometer. It is applicable to mopeds as defined in ISO 3833 equipped with a spark ignition engine (four-stroke engine, two-stroke engine or rotary piston engine).

International Classification for Standards (ICS)

ICS Classification Field ICS Field Sub-Group and Number
ICS-13-Environment ICS Transport Exhaust Emissions (13.040.50)
ICS-43-Road ICS Motorcycles/Mopeds (43.140)

ICS Related Standards

Cart Document Number Document Title
$103.00 ISO 10054:1998 Internal combustion compression-ignition engines - Measurement apparatus for smoke from engines operating under steady-state conditions - Filter-type smokemeter
$209.00 ISO 11614:1999 Reciprocating internal combustion compression-ignition engines -- Apparatus for measurement of the opacity and for determination of the light absorption coefficient of exhaust gas
$68.00 ISO 15031-1:2010 Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 1: General information and use case definition
$68.00 ISO 15031-2:2010 Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 2: Guidance on terms, definitions, abbreviations and acronyms
$45.00 ISO 15031-3:2016 Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 3: Diagnostic connector and related electrical circuits: Specification and use
$149.00 ISO 15031-3:2004 Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 3: Diagnostic connector and related electrical circuits, specification and use
$162.00 ISO 15031-4:2014 Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 4: External test equipment
$232.00 ISO 15031-5:2015 Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 5: Emissions-related diagnostic services
$265.00 ISO 15031-5:2011 Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 5: Emissions-related diagnostic services
$103.00 ISO 15031-6:2015 Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 6: Diagnostic trouble code definitions
$123.00 ISO 15031-6:2010 Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 6: Diagnostic trouble code definitions
$45.00 ISO 15031-7:2013 Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 7: Data link security
$209.00 ISO 16183:2002 Heavy duty engines - Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions
$68.00 ISO 16232-1:2007 Road vehicles - Cleanliness of components of fluid circuits - Part 1: Vocabulary
$138.00 ISO 16232-10:2007 Road vehicles - Cleanliness of components of fluid circuits - Part 10: Expression of results
$103.00 ISO 16232-2:2007 Road vehicles - Cleanliness of components of fluid circuits - Part 2: Method of extraction of contaminants by agitation
$103.00 ISO 16232-3:2007 Road vehicles - Cleanliness of components of fluid circuits - Part 3: Method of extraction of contaminants by pressure rinsing
$103.00 ISO 16232-4:2007 Road vehicles - Cleanliness of components of fluid circuits - Part 4: Method of extraction of contaminants by ultrasonic techniques
$103.00 ISO 16232-5:2007 Road vehicles - Cleanliness of components of fluid circuits - Part 5: Method of extraction of contaminants on functional test bench
$68.00 ISO 16232-6:2007 Road vehicles - Cleanliness of components of fluid circuits - Part 6: Particle mass determination by gravimetric analysis
$138.00 ISO 16232-7:2007 Road vehicles - Cleanliness of components of fluid circuits - Part 7: Particle sizing and counting by microscopic analysis
$68.00 ISO 16232-8:2007 Road vehicles - Cleanliness of components of fluid circuits - Part 8: Particle nature determination by microscopic analysis
$103.00 ISO 16232-9:2007 Road vehicles - Cleanliness of components of fluid circuits - Part 9: Particle sizing and counting by automatic light extinction particle counter
$68.00 ISO 17479:2013 Motorcycles - Measurement methods for gaseous exhaust emissions during inspection or maintenance
$232.00 ISO 18854:2015 Small craft - Reciprocating internal combustion engines exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions
$68.00 ISO 19449:2015 Mopeds - Measurement methods for gaseous exhaust emissions during inspection or maintenance
$45.00 ISO 3929:2003 Road vehicles -- Measurement methods for exhaust gas emissions during inspection or maintenance
$209.00 ISO 6460-1:2007 Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - Part 1: General test requirements
$19.00 ISO 6460-1:2007/Amd1:2015 - Amendment 1
$209.00 ISO 6460-2:2014 Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - Part 2: Test cycles and specific test conditions
$139.00 ISO 6460-2:2007 Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - Part 2: Test cycles and specific test conditions
$103.00 ISO 6460-3:2007 Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - Part 3: Fuel consumption measurement at a constant speed
$19.00 ISO 6460-3:2007/Amd1:2015 - Amendment 1
$209.00 ISO 6855-1:2012 Mopeds - Measurement method for gaseous exhaust emissions and fuel consumption - Part 1: General test requirements
$103.00 ISO 6855-2:2012 Mopeds - Measurement method for gaseous exhaust emissions and fuel consumption - Part 2: Test cycles and specific test conditions
$68.00 ISO 789-4:1986 Agricultural tractors -- Test procedures -- Part 4: Measurement of exhaust smoke
$232.00 ISO 8178-1:2006 Reciprocating internal combustion engines - Exhaust emission measurement - Part 1: Test-bed measurement of gaseous and particulate exhaust emissions
$185.00 ISO 8178-10:2002 Reciprocating internal combustion engines - Exhaust emission measurement - Part 10: Test cycles and test procedures for field measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
$240.00 ISO 8178-11:2006 Reciprocating internal combustion engines - Exhaust emission measurement - Part 11: Test-bed measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions
$138.00 ISO 8178-2:2008 Reciprocating internal combustion engines - Exhaust emission measurement - Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions
$45.00 ISO 8178-3:1994 Reciprocating internal combustion engines - Exhaust emission measurement - Part 3: Definitions and methods of measurement of exhaust gas smoke under steady-state conditions
$138.00 ISO 8178-4:2007 Reciprocating internal combustion engines - Exhaust emission measurement - Part 4: Steady-state test cycles for different engine applications
$185.00 ISO 8178-5:2015 Reciprocating internal combustion engines - Exhaust emission measurement - Part 5: Test fuels
$200.00 ISO 8178-5:2008 Reciprocating internal combustion engines - Exhaust emission measurement - Part 5: Test fuels
$103.00 ISO 8178-6:2000 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 6: Report of measuring results and test
$45.00 ISO 8178-7:2015 Reciprocating internal combustion engines - Exhaust emission measurement - Part 7: Engine family determination
$51.00 ISO 8178-7:1996 Reciprocating internal combustion engines - Exhaust emission measurement - Part 7: Engine family determination
$45.00 ISO 8178-8:2015 Reciprocating internal combustion engines - Exhaust emission measurement - Part 8: Engine group determination
$51.00 ISO 8178-8:1996 Reciprocating internal combustion engines - Exhaust emission measurement - Part 8: Engine group determination
$209.00 ISO 8178-9:2012 Reciprocating internal combustion engines - Exhaust emission measurement - Part 9: Test cycles and test procedures for test bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
$123.00 ISO/TR 9310:1987 Road vehicles - Smoke measurement of compression-ignition (diesel) engines - Survey of short in-service tests
$200.00 ISO/PAS 3930:2009 Instruments for measuring vehicle exhaust emissions - Metrological and technical requirements; Metrological control and performance tests
$107.00 JIS B 8008-9:2004 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 9: Test cycles and test procedures for test-bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
$107.00 JIS D 1044:2001 Powered two-wheeled vehicles -- Measurement method of exhaust (tail pipe) gases from spark ignition engines
$232.00 ISO 8178-1:2017 Reciprocating internal combustion engines - Exhaust emission measurement - Part 1: Test-bed measurement systems of gaseous and particulate emissions
$232.00 ISO 8178-4:2017 Reciprocating internal combustion engines - Exhaust emission measurement - Part 4: Steady-state and transient test cycles for different engine applications
$103.00 ISO 10190:2008 Motorcycle chains - Characteristics and test methods
$68.00 ISO 10355:2004 Mopeds - Positioning of lighting and light-signalling devices
$68.00 ISO 11460:2007 Two-wheeled motorcycles - Positioning of lighting and light-signalling devices
$138.00 ISO 11486:2006 Motorcycles - Methods for setting running resistance on a chassis dynamometer
$19.00 ISO 11486:2006/Amd1:2012 Motorcycles - Methods for setting running resistance on a chassis dynamometer - Amendment 1
$162.00 ISO 11838:1997 Motorcycle and motorcycle-rider kinematics - Vocabulary
$19.00 ISO 11838/Amd1:2011 Motorcycle and motorcycle-rider kinematics - Vocabulary - Amendment 1
$103.00 ISO 12364:2001 Two-wheeled motorcycles - Antilock braking systems (ABS) - Tests and measurement methods
$103.00 ISO 12366:2001 Two-wheeled mopeds - Antilock braking systems (ABS) - Tests and measurement methods
$103.00 ISO/TR 13062:2015 Electric mopeds and motorcycles - Terminology and classification
$138.00 ISO 13063:2012 Electrically propelled mopeds and motorcycles - Safety specifications
$103.00 ISO 13064-1:2012 Battery-electric mopeds and motorcycles - Performance - Part 1: Reference energy consumption and range
$68.00 ISO 13064-2:2012 Battery-electric mopeds and motorcycles - Performance - Part 2: Road operating characteristics
$162.00 ISO 13232-1:2005 Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 1: Definitions, symbols and general considerations
$19.00 ISO 13232-1/Amd1:2012 Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 1: Definitions, symbols and general considerations - Amendment 1: MATD test helmet, ground impact, and injury costs
$209.00 ISO 13232-2:2005 Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 2: Definition of impact conditions in relation to accident data
$232.00 ISO 13232-3:2005 Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 3: Motorcyclist anthropometric impact dummy
$19.00 ISO 13232-3/Amd1:2012 Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 3: Anthropometric impact dummy - Amendment 1: MATD test helmet
$232.00 ISO 13232-4:2005 Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 4: Variables to be measured, instrumentation and measurement procedures
$232.00 ISO 13232-5:2005 Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 5: Injury indices and risk/benefit analysis
$138.00 ISO 13232-5/Amd1:2012 Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 5: Injury indices and risk/benefit analysis - Amendment 1: Ground impact and injury costs
$185.00 ISO 13232-6:2005 Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 6: Full-scale impact-test procedures
$19.00 ISO 13232-6/Amd1:2012 Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 6: Full-scale impact-test procedures - Amendment 1: MATD test helmet
$162.00 ISO 13232-7:2005 Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 7: Standardized procedures for performing computer simulations of motorcycle impact tests
$19.00 ISO 13232-7/Amd1:2012 Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 7: Standardized procedures for performing computer simulations of motorcycle impact tests - Amendment 1: Ground impact
$209.00 ISO 13232-8:2005 Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 8: Documentation and reports
$19.00 ISO 13232-8/Amd1:2012 Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 8: Documentation and reports - Amendment 1: Ground impact and injury costs
$162.00 ISO 14722:1998 Moped and moped-rider kinematics - Vocabulary
$19.00 ISO 14722/Amd1:2011 Moped and moped-rider kinematics - Vocabulary - Amendment 1
$68.00 ISO 17479:2013 Motorcycles - Measurement methods for gaseous exhaust emissions during inspection or maintenance
$162.00 ISO 18246:2015 Electrically propelled mopeds and motorcycles - Safety requirements for conductive connection to an external electric power supply
$103.00 ISO 18580:2015 Motorcycles - Verification of total running resistance force during mode running on a chassis dynamometer
$68.00 ISO 19449:2015 Mopeds - Measurement methods for gaseous exhaust emissions during inspection or maintenance
$68.00 ISO 19689:2016 Motorcycles and mopeds - Communication between vehicle and external equipment for diagnostics - Diagnostic connector and related electrical circuits, specification and use
$138.00 ISO 28981:2009 Mopeds - Methods for setting the running resistance on a chassis dynamometer
$19.00 ISO 28981:2009/Amd1:2015 - Amendment 1
$138.00 ISO 4106:2012 Motorcycles - Engine test code - Net power
$68.00 ISO 4129:2012 Road vehicles - Mopeds - Symbols for controls, indicators and tell-tales
$45.00 ISO 4151:1987 Road vehicles - Mopeds - Type, location and functions of controls
$138.00 ISO 4164:2012 Mopeds - Engine test code - Net power
$68.00 ISO 4249-3:2010 Motorcycle tyres and rims (code-designated series) - Part 3: Rims
$103.00 ISO 5751-1:2010 Motorcycle tyres and rims (metric series) - Part 1: Design guides
$162.00 ISO 5751-2:2010 Motorcycle tyres and rims (metric series) - Part 2: Tyre dimensions and load-carrying capacities
$45.00 ISO 5751-3:2010 Motorcycle tyres and rims (metric series) - Part 3: Range of approved rim contours
$45.00 ISO 6054-2:1990 Motorcycle tyres and rims (Code-designated series) - Diameter codes 4 to 12 - Part 2: Rims
$209.00 ISO 6460-1:2007 Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - Part 1: General test requirements
$19.00 ISO 6460-1:2007/Amd1:2015 - Amendment 1
$209.00 ISO 6460-2:2014 Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - Part 2: Test cycles and specific test conditions
$139.00 ISO 6460-2:2007 Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - Part 2: Test cycles and specific test conditions
$103.00 ISO 6460-3:2007 Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - Part 3: Fuel consumption measurement at a constant speed
$19.00 ISO 6460-3:2007/Amd1:2015 - Amendment 1
$68.00 ISO 6725:1981 Road vehicles - Dimensions of two-wheeled mopeds and motorcycles - Terms and definitions
$45.00 ISO 6726:1988 Mopeds and motorcycles with two wheels - Masses - Vocabulary
$68.00 ISO 6727:2012 Road vehicles - Motorcycles - Symbols for controls, indicators and tell-tales
$209.00 ISO 6855-1:2012 Mopeds - Measurement method for gaseous exhaust emissions and fuel consumption - Part 1: General test requirements
$103.00 ISO 6855-2:2012 Mopeds - Measurement method for gaseous exhaust emissions and fuel consumption - Part 2: Test cycles and specific test conditions
$103.00 ISO 7116:2011 Mopeds - Measurement method for determining maximum speed
$103.00 ISO 7117:2010 Motorcycles - Measurement method for determining maximum speed
$68.00 ISO 7398:1990 Motorcycles - Direct current flasher units
$45.00 ISO 7399:1990 Motorcycles - Alternating current flasher units
$68.00 ISO 7400:1990 Mopeds - Alternating current flasher units
$68.00 ISO 8052:1990 Mopeds - Direct current flasher units
$68.00 ISO 8644:2006 Motorcycles - Light-alloy wheels - Test method
$45.00 ISO 8645:1988 Mopeds - Light-alloy wheels - Test method
$103.00 ISO 8705:2005 Mopeds - Measurement method for location of centre of gravity
$45.00 ISO 8706:1990 Two-wheeled mopeds - Parking stability of side- and centre-stands
$138.00 ISO 8709:2010 Mopeds - Brakes and brake systems - Tests and measurement methods
$162.00 ISO 8710:2010 Motorcycles - Brakes and brake systems - Tests and measurement methods
$68.00 ISO 9021:1988 Motorcycles - Controls - Types, positions and functions
$103.00 ISO 9043:2008 Mopeds - Measurement method for moments of inertia
$103.00 ISO 9129:2008 Motorcycles - Measurement methods for moments of inertia
$103.00 ISO 9130:2005 Motorcycles - Measurement method for location of centre of gravity
$103.00 ISO 9131:1993 Three-wheeled mopeds and motorcycles - Dimensions - Vocabulary
$68.00 ISO 9132:1990 Three-wheeled mopeds and motorcycles - Masses - Vocabulary
$45.00 ISO 9565:1990 Two-wheeled motorcycles - Parking stability of side- and centre-stands
$45.00 ISO 9645:1990 Acoustics - Measurement of noise emitted by two-wheeled mopeds in motion - Engineering method
$68.00 ISO 9987:1990 Motorcycles - Measurement of variation of dipped beam inclination as a function of load
$162.00 ISO/PAS 19695:2015 Motorcycles - Functional safety
$107.00 JIS D 1044:2001 Powered two-wheeled vehicles -- Measurement method of exhaust (tail pipe) gases from spark ignition engines
$185.00 ISO 18243:2017 Electrically propelled mopeds and motorcycles - Test specifications and safety requirements for lithium-ion battery systems
$103.00 ISO/TS 19466:2017 Electrically propelled mopeds and motorcycles - Test method for evaluating performance of regenerative braking systems