ISO 6460-3:2007/Amd1:2015 - $19.00   BUY NOW

- Amendment 1

ISO 6460-3:2007/Amd1:2015 Publication Description:

--- Abstract Source: ISO 6460-3:2007/Amd1:2015 ---

ISO 6460-1:2007 specifies the general test requirements for measurement for the gaseous exhaust emissions from motorcycles, and for determining the fuel consumption of motorcycles as defined in ISO 3833. It is applicable to motorcycles equipped with a spark ignition engine (4-stroke engine, 2-stroke engine or rotary piston engine) or a compression ignition engine.

International Classification for Standards (ICS)

ICS Classification Field ICS Field Sub-Group and Number
ICS-13-Environment ICS Transport Exhaust Emissions (13.040.50)
ICS-43-Road ICS Motorcycles/Mopeds (43.140)

ICS Related Standards

Cart Document Number Document Title
$103.00 ISO 10054:1998 Internal combustion compression-ignition engines - Measurement apparatus for smoke from engines operating under steady-state conditions - Filter-type smokemeter
$209.00 ISO 11614:1999 Reciprocating internal combustion compression-ignition engines -- Apparatus for measurement of the opacity and for determination of the light absorption coefficient of exhaust gas
$68.00 ISO 15031-1:2010 Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 1: General information and use case definition
$68.00 ISO 15031-2:2010 Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 2: Guidance on terms, definitions, abbreviations and acronyms
$45.00 ISO 15031-3:2016 Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 3: Diagnostic connector and related electrical circuits: Specification and use
$149.00 ISO 15031-3:2004 Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 3: Diagnostic connector and related electrical circuits, specification and use
$162.00 ISO 15031-4:2014 Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 4: External test equipment
$232.00 ISO 15031-5:2015 Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 5: Emissions-related diagnostic services
$265.00 ISO 15031-5:2011 Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 5: Emissions-related diagnostic services
$103.00 ISO 15031-6:2015 Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 6: Diagnostic trouble code definitions
$123.00 ISO 15031-6:2010 Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 6: Diagnostic trouble code definitions
$45.00 ISO 15031-7:2013 Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 7: Data link security
$209.00 ISO 16183:2002 Heavy duty engines - Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions
$68.00 ISO 16232-1:2007 Road vehicles - Cleanliness of components of fluid circuits - Part 1: Vocabulary
$138.00 ISO 16232-10:2007 Road vehicles - Cleanliness of components of fluid circuits - Part 10: Expression of results
$103.00 ISO 16232-2:2007 Road vehicles - Cleanliness of components of fluid circuits - Part 2: Method of extraction of contaminants by agitation
$103.00 ISO 16232-3:2007 Road vehicles - Cleanliness of components of fluid circuits - Part 3: Method of extraction of contaminants by pressure rinsing
$103.00 ISO 16232-4:2007 Road vehicles - Cleanliness of components of fluid circuits - Part 4: Method of extraction of contaminants by ultrasonic techniques
$103.00 ISO 16232-5:2007 Road vehicles - Cleanliness of components of fluid circuits - Part 5: Method of extraction of contaminants on functional test bench
$68.00 ISO 16232-6:2007 Road vehicles - Cleanliness of components of fluid circuits - Part 6: Particle mass determination by gravimetric analysis
$138.00 ISO 16232-7:2007 Road vehicles - Cleanliness of components of fluid circuits - Part 7: Particle sizing and counting by microscopic analysis
$68.00 ISO 16232-8:2007 Road vehicles - Cleanliness of components of fluid circuits - Part 8: Particle nature determination by microscopic analysis
$103.00 ISO 16232-9:2007 Road vehicles - Cleanliness of components of fluid circuits - Part 9: Particle sizing and counting by automatic light extinction particle counter
$68.00 ISO 17479:2013 Motorcycles - Measurement methods for gaseous exhaust emissions during inspection or maintenance
$232.00 ISO 18854:2015 Small craft - Reciprocating internal combustion engines exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions
$68.00 ISO 19449:2015 Mopeds - Measurement methods for gaseous exhaust emissions during inspection or maintenance
$45.00 ISO 3929:2003 Road vehicles -- Measurement methods for exhaust gas emissions during inspection or maintenance
$209.00 ISO 6460-1:2007 Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - Part 1: General test requirements
$19.00 ISO 6460-1:2007/Amd1:2015 - Amendment 1
$209.00 ISO 6460-2:2014 Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - Part 2: Test cycles and specific test conditions
$139.00 ISO 6460-2:2007 Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - Part 2: Test cycles and specific test conditions
$103.00 ISO 6460-3:2007 Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - Part 3: Fuel consumption measurement at a constant speed
$209.00 ISO 6855-1:2012 Mopeds - Measurement method for gaseous exhaust emissions and fuel consumption - Part 1: General test requirements
$103.00 ISO 6855-2:2012 Mopeds - Measurement method for gaseous exhaust emissions and fuel consumption - Part 2: Test cycles and specific test conditions
$103.00 ISO 6855-3:2012 Mopeds - Measurement method for gaseous exhaust emissions and fuel consumption - Part 3: Fuel consumption measurement at a constant speed
$68.00 ISO 789-4:1986 Agricultural tractors -- Test procedures -- Part 4: Measurement of exhaust smoke
$232.00 ISO 8178-1:2006 Reciprocating internal combustion engines - Exhaust emission measurement - Part 1: Test-bed measurement of gaseous and particulate exhaust emissions
$185.00 ISO 8178-10:2002 Reciprocating internal combustion engines - Exhaust emission measurement - Part 10: Test cycles and test procedures for field measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
$240.00 ISO 8178-11:2006 Reciprocating internal combustion engines - Exhaust emission measurement - Part 11: Test-bed measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions
$138.00 ISO 8178-2:2008 Reciprocating internal combustion engines - Exhaust emission measurement - Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions
$45.00 ISO 8178-3:1994 Reciprocating internal combustion engines - Exhaust emission measurement - Part 3: Definitions and methods of measurement of exhaust gas smoke under steady-state conditions
$138.00 ISO 8178-4:2007 Reciprocating internal combustion engines - Exhaust emission measurement - Part 4: Steady-state test cycles for different engine applications
$185.00 ISO 8178-5:2015 Reciprocating internal combustion engines - Exhaust emission measurement - Part 5: Test fuels
$200.00 ISO 8178-5:2008 Reciprocating internal combustion engines - Exhaust emission measurement - Part 5: Test fuels
$103.00 ISO 8178-6:2000 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 6: Report of measuring results and test
$45.00 ISO 8178-7:2015 Reciprocating internal combustion engines - Exhaust emission measurement - Part 7: Engine family determination
$51.00 ISO 8178-7:1996 Reciprocating internal combustion engines - Exhaust emission measurement - Part 7: Engine family determination
$45.00 ISO 8178-8:2015 Reciprocating internal combustion engines - Exhaust emission measurement - Part 8: Engine group determination
$51.00 ISO 8178-8:1996 Reciprocating internal combustion engines - Exhaust emission measurement - Part 8: Engine group determination
$209.00 ISO 8178-9:2012 Reciprocating internal combustion engines - Exhaust emission measurement - Part 9: Test cycles and test procedures for test bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
$123.00 ISO/TR 9310:1987 Road vehicles - Smoke measurement of compression-ignition (diesel) engines - Survey of short in-service tests
$200.00 ISO/PAS 3930:2009 Instruments for measuring vehicle exhaust emissions - Metrological and technical requirements; Metrological control and performance tests
$107.00 JIS B 8008-9:2004 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 9: Test cycles and test procedures for test-bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
$107.00 JIS D 1044:2001 Powered two-wheeled vehicles -- Measurement method of exhaust (tail pipe) gases from spark ignition engines
$232.00 ISO 8178-1:2017 Reciprocating internal combustion engines - Exhaust emission measurement - Part 1: Test-bed measurement systems of gaseous and particulate emissions
$232.00 ISO 8178-4:2017 Reciprocating internal combustion engines - Exhaust emission measurement - Part 4: Steady-state and transient test cycles for different engine applications
$103.00 ISO 10190:2008 Motorcycle chains - Characteristics and test methods
$68.00 ISO 10355:2004 Mopeds - Positioning of lighting and light-signalling devices
$68.00 ISO 11460:2007 Two-wheeled motorcycles - Positioning of lighting and light-signalling devices
$138.00 ISO 11486:2006 Motorcycles - Methods for setting running resistance on a chassis dynamometer
$19.00 ISO 11486:2006/Amd1:2012 Motorcycles - Methods for setting running resistance on a chassis dynamometer - Amendment 1
$162.00 ISO 11838:1997 Motorcycle and motorcycle-rider kinematics - Vocabulary
$19.00 ISO 11838/Amd1:2011 Motorcycle and motorcycle-rider kinematics - Vocabulary - Amendment 1
$103.00 ISO 12364:2001 Two-wheeled motorcycles - Antilock braking systems (ABS) - Tests and measurement methods
$103.00 ISO 12366:2001 Two-wheeled mopeds - Antilock braking systems (ABS) - Tests and measurement methods
$103.00 ISO/TR 13062:2015 Electric mopeds and motorcycles - Terminology and classification
$138.00 ISO 13063:2012 Electrically propelled mopeds and motorcycles - Safety specifications
$103.00 ISO 13064-1:2012 Battery-electric mopeds and motorcycles - Performance - Part 1: Reference energy consumption and range
$68.00 ISO 13064-2:2012 Battery-electric mopeds and motorcycles - Performance - Part 2: Road operating characteristics
$162.00 ISO 13232-1:2005 Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 1: Definitions, symbols and general considerations
$19.00 ISO 13232-1/Amd1:2012 Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 1: Definitions, symbols and general considerations - Amendment 1: MATD test helmet, ground impact, and injury costs
$209.00 ISO 13232-2:2005 Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 2: Definition of impact conditions in relation to accident data
$232.00 ISO 13232-3:2005 Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 3: Motorcyclist anthropometric impact dummy
$19.00 ISO 13232-3/Amd1:2012 Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 3: Anthropometric impact dummy - Amendment 1: MATD test helmet
$232.00 ISO 13232-4:2005 Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 4: Variables to be measured, instrumentation and measurement procedures
$232.00 ISO 13232-5:2005 Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 5: Injury indices and risk/benefit analysis
$138.00 ISO 13232-5/Amd1:2012 Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 5: Injury indices and risk/benefit analysis - Amendment 1: Ground impact and injury costs
$185.00 ISO 13232-6:2005 Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 6: Full-scale impact-test procedures
$19.00 ISO 13232-6/Amd1:2012 Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 6: Full-scale impact-test procedures - Amendment 1: MATD test helmet
$162.00 ISO 13232-7:2005 Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 7: Standardized procedures for performing computer simulations of motorcycle impact tests
$19.00 ISO 13232-7/Amd1:2012 Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 7: Standardized procedures for performing computer simulations of motorcycle impact tests - Amendment 1: Ground impact
$209.00 ISO 13232-8:2005 Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 8: Documentation and reports
$19.00 ISO 13232-8/Amd1:2012 Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 8: Documentation and reports - Amendment 1: Ground impact and injury costs
$162.00 ISO 14722:1998 Moped and moped-rider kinematics - Vocabulary
$19.00 ISO 14722/Amd1:2011 Moped and moped-rider kinematics - Vocabulary - Amendment 1
$68.00 ISO 17479:2013 Motorcycles - Measurement methods for gaseous exhaust emissions during inspection or maintenance
$162.00 ISO 18246:2015 Electrically propelled mopeds and motorcycles - Safety requirements for conductive connection to an external electric power supply
$103.00 ISO 18580:2015 Motorcycles - Verification of total running resistance force during mode running on a chassis dynamometer
$68.00 ISO 19449:2015 Mopeds - Measurement methods for gaseous exhaust emissions during inspection or maintenance
$68.00 ISO 19689:2016 Motorcycles and mopeds - Communication between vehicle and external equipment for diagnostics - Diagnostic connector and related electrical circuits, specification and use
$138.00 ISO 28981:2009 Mopeds - Methods for setting the running resistance on a chassis dynamometer
$19.00 ISO 28981:2009/Amd1:2015 - Amendment 1
$138.00 ISO 4106:2012 Motorcycles - Engine test code - Net power
$68.00 ISO 4129:2012 Road vehicles - Mopeds - Symbols for controls, indicators and tell-tales
$45.00 ISO 4151:1987 Road vehicles - Mopeds - Type, location and functions of controls
$138.00 ISO 4164:2012 Mopeds - Engine test code - Net power
$68.00 ISO 4249-3:2010 Motorcycle tyres and rims (code-designated series) - Part 3: Rims
$103.00 ISO 5751-1:2010 Motorcycle tyres and rims (metric series) - Part 1: Design guides
$162.00 ISO 5751-2:2010 Motorcycle tyres and rims (metric series) - Part 2: Tyre dimensions and load-carrying capacities
$45.00 ISO 5751-3:2010 Motorcycle tyres and rims (metric series) - Part 3: Range of approved rim contours
$45.00 ISO 6054-2:1990 Motorcycle tyres and rims (Code-designated series) - Diameter codes 4 to 12 - Part 2: Rims
$209.00 ISO 6460-1:2007 Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - Part 1: General test requirements
$19.00 ISO 6460-1:2007/Amd1:2015 - Amendment 1
$209.00 ISO 6460-2:2014 Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - Part 2: Test cycles and specific test conditions
$139.00 ISO 6460-2:2007 Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - Part 2: Test cycles and specific test conditions
$103.00 ISO 6460-3:2007 Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - Part 3: Fuel consumption measurement at a constant speed
$68.00 ISO 6725:1981 Road vehicles - Dimensions of two-wheeled mopeds and motorcycles - Terms and definitions
$45.00 ISO 6726:1988 Mopeds and motorcycles with two wheels - Masses - Vocabulary
$68.00 ISO 6727:2012 Road vehicles - Motorcycles - Symbols for controls, indicators and tell-tales
$209.00 ISO 6855-1:2012 Mopeds - Measurement method for gaseous exhaust emissions and fuel consumption - Part 1: General test requirements
$103.00 ISO 6855-2:2012 Mopeds - Measurement method for gaseous exhaust emissions and fuel consumption - Part 2: Test cycles and specific test conditions
$103.00 ISO 6855-3:2012 Mopeds - Measurement method for gaseous exhaust emissions and fuel consumption - Part 3: Fuel consumption measurement at a constant speed
$103.00 ISO 7116:2011 Mopeds - Measurement method for determining maximum speed
$103.00 ISO 7117:2010 Motorcycles - Measurement method for determining maximum speed
$68.00 ISO 7398:1990 Motorcycles - Direct current flasher units
$45.00 ISO 7399:1990 Motorcycles - Alternating current flasher units
$68.00 ISO 7400:1990 Mopeds - Alternating current flasher units
$68.00 ISO 8052:1990 Mopeds - Direct current flasher units
$68.00 ISO 8644:2006 Motorcycles - Light-alloy wheels - Test method
$45.00 ISO 8645:1988 Mopeds - Light-alloy wheels - Test method
$103.00 ISO 8705:2005 Mopeds - Measurement method for location of centre of gravity
$45.00 ISO 8706:1990 Two-wheeled mopeds - Parking stability of side- and centre-stands
$138.00 ISO 8709:2010 Mopeds - Brakes and brake systems - Tests and measurement methods
$162.00 ISO 8710:2010 Motorcycles - Brakes and brake systems - Tests and measurement methods
$68.00 ISO 9021:1988 Motorcycles - Controls - Types, positions and functions
$103.00 ISO 9043:2008 Mopeds - Measurement method for moments of inertia
$103.00 ISO 9129:2008 Motorcycles - Measurement methods for moments of inertia
$103.00 ISO 9130:2005 Motorcycles - Measurement method for location of centre of gravity
$103.00 ISO 9131:1993 Three-wheeled mopeds and motorcycles - Dimensions - Vocabulary
$68.00 ISO 9132:1990 Three-wheeled mopeds and motorcycles - Masses - Vocabulary
$45.00 ISO 9565:1990 Two-wheeled motorcycles - Parking stability of side- and centre-stands
$45.00 ISO 9645:1990 Acoustics - Measurement of noise emitted by two-wheeled mopeds in motion - Engineering method
$68.00 ISO 9987:1990 Motorcycles - Measurement of variation of dipped beam inclination as a function of load
$162.00 ISO/PAS 19695:2015 Motorcycles - Functional safety
$107.00 JIS D 1044:2001 Powered two-wheeled vehicles -- Measurement method of exhaust (tail pipe) gases from spark ignition engines
$185.00 ISO 18243:2017 Electrically propelled mopeds and motorcycles - Test specifications and safety requirements for lithium-ion battery systems
$103.00 ISO/TS 19466:2017 Electrically propelled mopeds and motorcycles - Test method for evaluating performance of regenerative braking systems