ISO 6162-2:2012 - $138.00   BUY NOW

Hydraulic fluid power - Flange connections with split or one-piece flange clamps and metric or inch screws - Part 2: Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76

ISO 6162-2:2012 Publication Description:

ISO 6162-2:2012 gives general and dimensional specifications for flanged heads, split flange clamps (FCS and FCSM), one-piece flange clamps (FC and FCM), ports and mounting surfaces applicable to four-screw, split and one-piece flange clamp type tube connectors and hose fittings for use at a pressure of 42 MPa (420 bar ). It also specifies the dimensions of the seals to be used, as well as the grooves that house the seals.

ISO 6162-2:2012 also recognizes the need to accommodate metric screw fasteners (type 1) (for DN 13 to DN 76), as well as to provide a means to use existing inch screw fasteners (type 2) (for DN 13 to DN 51).

These connections are intended for application in hydraulic systems on industrial and commercial products where it is desired to avoid the use of threaded connectors.

Surges of pressure higher than the nominal ratings will reduce the ability of the flange connections to retain the hydraulic fluid. This needs to be taken into account in the design of the hydraulic system.

International Classification for Standards (ICS)

ICS Classification Field ICS Field Sub-Group and Number
ICS-23-Fluid ICS Piping/Couplings (23.100.40)

ICS Related Standards

Cart Document Number Document Title
$45.00 ISO 10763:1994 Hydraulic fluid power - Plain-end, seamless and welded precision steel tubes - Dimensions and nominal working pressures
$68.00 ISO 11237:2010 Rubber hoses and hose assemblies - Compact wire-braid-reinforced hydraulic types for oil-based or water-based fluids - Specification
$45.00 ISO/TR 11340:1994 Rubber and rubber products - Hydraulic hose assemblies - External leakage classification for hydraulic systems
$103.00 ISO/TS 11672:2016 Connectors for fluid power and general use - Designation and nomenclature
$45.00 ISO 1179-1:2013 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports
$68.00 ISO 1179-2:2013 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E)
$103.00 ISO 1179-3:2007 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H)
$68.00 ISO 1179-4:2007 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 4: Stud ends for general use only with metal-to-metal sealing (type B)
$45.00 ISO 11926-1:1995 Connections for general use and fluid power - Ports and stud ends with ISO 725 threads and O-ring sealing - Part 1: Ports with O-ring seal in truncated housing
$68.00 ISO 11926-2:1995 Connections for general use and fluid power - Ports and stud ends with ISO 725 threads and O-ring sealing - Part 2: Heavy-duty (S series) stud ends
$68.00 ISO 11926-3:1995 Connections for general use and fluid power - Ports and stud ends with ISO 725 threads and O-ring sealing - Part 3: Light-duty (L series) stud ends
$103.00 ISO 12151-1:2010 Connections for hydraulic fluid power and general use - Hose fittings - Part 1: Hose fittings with ISO 8434-3 O-ring face seal ends
$19.00 ISO 12151-1:2010/Amd1:2017 - Amendment 1
$103.00 ISO 12151-2:2003 Connections for hydraulic fluid power and general use - Hose fittings - Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24 degree cone connector ends with O-rings
$68.00 ISO 12151-3:2010 Connections for hydraulic fluid power and general use - Hose fittings - Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends
$68.00 ISO 12151-4:2007 Connections for hydraulic fluid power and general use - Hose fittings - Part 4: Hose fittings with ISO 6149 metric stud ends
$68.00 ISO 12151-5:2007 Connections for hydraulic fluid power and general use - Hose fittings - Part 5: Hose fittings with ISO 8434-2 37 degree flared ends
$68.00 ISO 12151-6:2009 Connections for hydraulic fluid power and general use - Hose fittings - Part 6: Hose fittings with ISO 8434-6 60 degree cone ends
$68.00 ISO 1436:2009 Rubber hoses and hose assemblies - Wire-braid-reinforced hydraulic types for oil-based or water-based fluids - Specification
$45.00 ISO 14540:2013 Hydraulic fluid power - Dimensions and requirements for screw-to-connect quick-action couplings for use at a pressure of 72 MPa (720 bar)
$45.00 ISO 14541:2013 Hydraulic fluid power - Dimensions and requirements for screw-to-connect quick-action couplings for general purpose
$138.00 ISO 14743:2004 Pneumatic fluid power - Push-in connectors for thermoplastic tubes
$45.00 ISO 15171-1:1999 Connections for fluid power and general use -- Hydraulic couplings for diagnostic purposes -- Part 1: Coupling not for connection under pressure
$68.00 ISO 15171-2:2016 Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Part 2: Coupling with M16 x 2 end for connection under pressure
$51.00 ISO 15171-2:2000 Connections for fluid power and general use -- Hydraulic couplings for diagnostic purposes -- Part 2: Coupling with M16 x 2 end for connection under pressure
$45.00 ISO 16028:1999 Hydraulic fluid power -- Flush-face type, quick-action couplings for use at pressures of 20 MPa (200 bar) to 31,5 MPa (315 bar) -- Specifications
$19.00 ISO 16028/Amd1:2006 Hydraulic fluid power - Flush-face type, quick-action couplings for use at pressures of 20 MPa (200 bar) to 31,5 MPa (315 bar) - Specifications - Amendment 1
$103.00 ISO 16030:2001 Pneumatic fluid power - Connections - Ports and stud ends
$19.00 ISO 16030/Amd1:2005 Pneumatic fluid power - Connections - Ports and stud ends - Amendment 1
$138.00 ISO 19879:2010 Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections
$103.00 ISO 23297:2008 Thermoplastics hoses and hose assemblies - Wire or synthetic yarn reinforced single-pressure types for hydraulic applications - Specification
$68.00 ISO 23309:2007 Hydraulic fluid power systems - Assembled systems - Methods of cleaning lines by flushing
$103.00 ISO 3862:2009 Rubber hoses and hose assemblies - Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids - Specification
$103.00 ISO 3949:2009 Plastics hoses and hose assemblies - Textile-reinforced types for hydraulic applications - Specification
$68.00 ISO 4079:2015 Rubber hoses and hose assemblies - Textile-reinforced hydraulic types for oil-based or water-based fluids - Specification
$123.00 ISO 4079:2009 Rubber hoses and hose assemblies - Textile-reinforced hydraulic types for oil-based or water-based fluids - Specification
$123.00 ISO 4079:2009 Rubber hoses and hose assemblies - Textile-reinforced hydraulic types for oil-based or water-based fluids - Specification
$45.00 ISO 4397:2011 Fluid power connectors and associated components - Nominal outside diameters of tubes and nominal hose sizes
$45.00 ISO 4399:1995 Fluid power systems and components - Connectors and associated components - Nominal pressures
$45.00 ISO 6149-1:2006 Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 1: Ports with truncated housing for O-ring seal
$68.00 ISO 6149-2:2006 Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends
$68.00 ISO 6149-3:2006 Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends
$68.00 ISO 6149-4:2006 Connections for fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs
$103.00 ISO 6150:1988 Pneumatic fluid power - Cylindrical quick-action couplings for maximum working pressures of 10 bar, 16 bar and 25 bar (1 MPa, 1,6 Mpa, and 2,5 MPa) - Plug connecting dimensions, specifications, application guidelines and testing
$138.00 ISO 6162-1:2012 Hydraulic fluid power - Flange connections with split or one-piece flange clamps and metric or inch screws - Part 1: Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127
$68.00 ISO 6164:1994 Hydraulic fluid power - Four-screw, one-piece square-flange connections for use at pressures of 25 MPa and 40 MPa (250 bar and 400 bar)
$68.00 ISO 6605:2002 Hydraulic fluid power - Hoses and hose assemblies - Test methods
$68.00 ISO 7241:2014 Hydraulic fluid power - Dimensions and requirements of quick-action couplings
$66.00 ISO 7241-1:1987 Hydraulic fluid power - Quick-action couplings - Part 1 : Dimensions and requirements
$138.00 ISO 7241-2:2000 Hydraulic fluid power - Quick-action couplings - Part 2: Test methods
$185.00 ISO 8434-1:2007 Metallic tube connections for fluid power and general use - Part 1: 24 degree cone connectors
$185.00 ISO 8434-2:2007 Metallic tube connections for fluid power and general use - Part 2: 37 degree flared connectors
$209.00 ISO 8434-3:2005 Metallic tube connections for fluid power and general use - Part 3: O-ring face seal connectors
$185.00 ISO 8434-6:2009 Metallic tube connections for fluid power and general use - Part 6: 60 degree cone connectors with or without O-ring
$45.00 ISO 9974-1:1996 Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports
$68.00 ISO 9974-2:1996 Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 2: Stud ends with elastomeric sealing (type E)
$68.00 ISO 9974-3:1996 Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 3: Stud ends with metal-to-metal sealing (type B)
$68.00 ISO 9974-4:2016 Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs
$88.00 ISO 9974-4:2006 Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs
$103.00 ISO 4079:2017 Rubber hoses and hose assemblies - Textile-reinforced hydraulic types for oil-based or water-based fluids - Specification
$103.00 ISO 1436:2017 Rubber hoses and hose assemblies - Wire-braid-reinforced hydraulic types for oil-based or water-based fluids - Specification
$103.00 ISO 3862:2017 Rubber hoses and hose assemblies - Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids - Specification
$68.00 ISO 6149-4:2017 Connections for fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs
$68.00 ISO 6605:2017 Hydraulic fluid power - Test methods for hoses and hose assemblies
$68.00 ISO 11237:2017 Rubber hoses and hose assemblies - Compact wire-braid-reinforced hydraulic types for oil-based or water-based fluids - Specification