ISO 5359:2014/Amd1:2017 - $19.00   BUY NOW

- Amendment 1

ISO 5359:2014/Amd1:2017 Publication Description:

--- Abstract Source: ISO 5359:2014/Amd1:2017 ---

ISO 5359:2014 specifies requirements for low-pressure hose assemblies intended for use with the following medical gases: oxygen, nitrous oxide, medical air, helium, carbon dioxide, xenon, specified mixtures of the gases listed above, oxygen-enriched air, air for driving surgical tools, nitrogen for driving surgical tools, and for use with vacuum. It applies to hose assemblies operating at pressures up to 1 400 kPa and for vacuum systems at pressures not greater than 60 kPa absolute. It does not specify the dimensions and allocation of the gas-specific inlet and outlet connectors for the hose assemblies.It does not specify requirements for coaxial hoses used for the supply and removal of air for driving surgical tools.Nor does it specify the intended uses of hose assemblies.

International Classification for Standards (ICS)

ICS Classification Field ICS Field Sub-Group and Number
ICS-11-Health ICS Anaesthetic-Respiratory (11.040.10)
ICS-83-Rubber ICS Hoses (83.140.40)

ICS Related Standards

Cart Document Number Document Title
$162.00 ISO 10079-1:2015 Medical suction equipment - Part 1: Electrically powered suction equipment
$173.00 ISO 10079-1:1999 Medical suction equipment -- Part 1: Electrically powered suction equipment -- Safety requirements
$138.00 ISO 10079-2:2014 Medical suction equipment - Part 2: Manually powered suction equipment
$162.00 ISO 10079-3:2014 Medical suction equipment - Part 3: Suction equipment powered from a vacuum or positive pressure gas source
$200.00 ISO 10083:2006 Oxygen concentrator supply systems for use with medical gas pipeline systems
$162.00 ISO 10524-1:2006 Pressure regulators for use with medical gases - Part 1: Pressure regulators and pressure regulators with flow-metering devices
$162.00 ISO 10524-2:2005 Pressure regulators for use with medical gases - Part 2: Manifold and line pressure regulators
$162.00 ISO 10524-3:2005 Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves
$19.00 ISO 10524-3:2005/Amd1:2013 - Amendment 1: Filtration and information to be supplied by the manufacturer
$162.00 ISO 10524-4:2008 Pressure regulators for use with medical gases - Part 4: Low-pressure regulators
$173.00 ISO 10651-2:2004 Lung ventilators for medical use - Particular requirements for basic safety and essential performance - Part 2: Home care ventilators for ventilator-dependent patients
$162.00 ISO 10651-3:1997 Lung ventilators for medical use -- Part 3: Particular requirements for emergency and transport ventilators
$138.00 ISO 10651-4:2002 Lung ventilators - Part 4: Particular requirements for operator-powered resuscitators
$185.00 ISO 10651-5:2006 Lung ventilators for medical use - Particular requirements for basic safety and essential performance - Part 5: Gas-powered emergency resuscitators
$162.00 ISO 10651-6:2004 Lung ventilators for medical use - Particular requirements for basic safety and essential performance - Part 6: Home-care ventilatory support devices
$45.00 ISO 11040-1:2015 Prefilled syringes - Part 1: Glass cylinders for dental local anaesthetic cartridges
$51.00 ISO 11040-1:1992 Prefilled syringes -- Part 1: Glass cylinders for dental local anaesthetic cartridges
$45.00 ISO 11040-2:2011 Prefilled syringes - Part 2: Plunger stoppers for dental local anaesthetic cartridges
$45.00 ISO 11040-3:2012 Prefilled syringes - Part 3: Seals for dental local anaesthetic cartridges
$68.00 ISO 11117:2008 Gas cylinders - Valve protection caps and valve guards - Design, construction and tests
$68.00 ISO 11195:1995 Gas mixers for medical use -- Stand-alone gas mixers
$138.00 ISO 11197:2016 Medical supply units
$200.00 ISO 11197:2004 Medical supply units
$68.00 ISO 11499:2014 Dentistry - Single-use cartridges for local anaesthetics
$162.00 ISO 11712:2009 Anaesthetic and respiratory equipment - Supralaryngeal airways and connectors
$68.00 ISO 11990-1:2011 Lasers and laser-related equipment - Determination of laser resistance of tracheal tubes - Part 1: Tracheal tube shaft
$68.00 ISO 11990-2:2010 Lasers and laser-related equipment - Determination of laser resistance of tracheal tubes - Part 2: Tracheal tube cuffs
$68.00 ISO 14408:2016 Tracheal tubes designed for laser surgery - Requirements for marking and accompanying information
$51.00 ISO 14408:2005 Tracheal tubes designed for laser surgery - Requirements for marking and accompanying information
$185.00 ISO 15001:2010 Anaesthetic and respiratory equipment - Compatibility with oxygen
$138.00 ISO 15002:2008 Flow-metering devices for connection to terminal units of medical gas pipeline systems
$185.00 ISO 16571:2014 Systems for evacuation of plume generated by medical devices
$68.00 ISO 16628:2008 Tracheobronchial tubes - Sizing and marking
$162.00 ISO 17510:2015 Medical devices - Sleep apnoea breathing therapy - Masks and application accessories
$173.00 ISO 17510-1:2007 Sleep apnoea breathing therapy - Part 1: Sleep apnoea breathing therapy equipment
$173.00 ISO 17510-2:2007 Sleep apnoea breathing therapy - Part 2: Masks and application accessories
$68.00 ISO 18082:2014 Anaesthetic and respiratory equipment - Dimensions of non-interchangeable screw-threaded (NIST) low-pressure connectors for medical gases
$138.00 ISO 18190:2016 Anaesthetic and respiratory equipment - General requirements for airways and related equipment
$138.00 ISO 18778:2005 Respiratory equipment - Infant monitors - Particular requirements
$138.00 ISO 18835:2015 Inhalational anaesthesia systems - Draw-over anaesthetic systems
$149.00 ISO/TS 18835:2004 Inhalational anaesthesia systems - Draw-over vaporizers and associated equipment
$185.00 ISO 20072:2009 Aerosol drug delivery device design verification - Requirements and test methods
$103.00 ISO 21969:2009 High-pressure flexible connections for use with medical gas systems
$68.00 ISO 23328-1:2003 Breathing system filters for anaesthetic and respiratory use -- Part 1: Salt test method to assess filtration performance
$45.00 ISO 23328-2:2002 Breathing system filters for anaesthetic and respiratory use - Part 2: Non-filtration aspects
$138.00 ISO 23747:2015 Anaesthetic and respiratory equipment - Peak expiratory flow meters for the assessment of pulmonary function in spontaneously breathing humans
$149.00 ISO 23747:2007 Anaesthetic and respiratory equipment - Peak expiratory flow meters for the assessment of pulmonary function in spontaneously breathing humans
$162.00 ISO 26782:2009 Anaesthetic and respiratory equipment - Spirometers intended for the measurement of time forced expired volumes in humans
$45.00 ISO 26825:2008 Anaesthetic and respiratory equipment - User-applied labels for syringes containing drugs used during anaesthesia - Colours, design and performance
$185.00 ISO 27427:2013 Anaesthetic and respiratory equipment - Nebulizing systems and components
$45.00 ISO 32:1977 Gas cylinders for medical use - Marking for identification of content
$138.00 ISO 407:2004 Small medical gas cylinders - Pin-index yoke-type valve connections
$209.00 ISO 4135:2001 Anaesthetic and respiratory equipment - Vocabulary
$103.00 ISO 5356-1:2015 Anaesthetic and respiratory equipment - Conical connectors - Part 1: Cones and sockets
$123.00 ISO 5356-1:2004 Anaesthetic and respiratory equipment - Conical connectors - Part 1: Cones and sockets
$45.00 ISO 5356-2:2012 Anaesthetic and respiratory equipment - Conical connectors - Part 2: Screw-threaded weight-bearing connectors
$103.00 ISO 5358:1992 Anaesthetic machines for use with humans
$138.00 ISO 5359:2014 Anaesthetic and respiratory equipment - Low-pressure hose assemblies for use with medical gases
$156.00 ISO 5359:2008 Low-pressure hose assemblies for use with medical gases
$22.00 ISO 5359/Amd1:2011 Low-pressure flexible connecting assemblies (hose assemblies) for use with medical gas systems - Amendment 1
$138.00 ISO 5360:2016 Anaesthetic vaporizers - Agent-specific filling systems
$149.00 ISO 5360:2012 Anaesthetic vaporizers - Agent-specific filling systems
$200.00 ISO 5361:2012 Anaesthetic and respiratory equipment - Tracheal tubes and connectors
$103.00 ISO 5362:2006 Anaesthetic reservoir bags
$103.00 ISO 5364:2016 Anaesthetic and respiratory equipment - Oropharyngeal airways
$88.00 ISO 5364:2008 Anaesthetic and respiratory equipment - Oropharyngeal airways
$138.00 ISO 5366:2016 Anaesthetic and respiratory equipment - Tracheostomy tubes and connectors
$123.00 ISO 5366-1:2000 Anaesthetic and respiratory equipment -- Tracheostomy tubes -- Part 1: Tubes and connectors for use in adults
$88.00 ISO 5366-3:2001 Anaesthetic and respiratory equipment - Tracheostomy tubes - Part 3: Paediatric tracheostomy tubes
$162.00 ISO 5367:2014 Anaesthetic and respiratory equipment - Breathing sets and connectors
$123.00 ISO 5367:2000 Breathing tubes intended for use with anaesthetic apparatus and ventilators
$162.00 ISO 7376:2009 Anaesthetic and respiratory equipment - Laryngoscopes for tracheal intubation
$232.00 ISO 7396-1:2016 Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum
$265.00 ISO 7396-1:2007 Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum
$22.00 ISO 7396-1/Amd1:2010 Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum - Amendment 1: Requirements for terminal units for vacuum fitted on medical supply units with operator-adjustable portions and connected to the pipeline through flexible hoses
$22.00 ISO 7396-1/Amd2:2010 Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum - Amendment 2
$19.00 ISO 7396-1:2007/Amd3:2013 - Amendment 3: Terminology relating to alarm systems
$185.00 ISO 7396-2:2007 Medical gas pipeline systems - Part 2: Anaesthetic gas scavenging disposal systems
$103.00 ISO 80369-1:2010 Small-bore connectors for liquids and gases in healthcare applications - Part 1: General requirements
$209.00 ISO 80601-2-12:2011 Medical electrical equipment - Part 2-12: Particular requirements for basic safety and essential performance of critical care ventilators
$232.00 ISO 80601-2-13:2011 Medical electrical equipment - Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation
$19.00 ISO 80601-2-13:2011/Amd1:2015 - Amendment 1
$209.00 ISO 80601-2-55:2011 Medical electrical equipment - Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitors
$232.00 ISO 80601-2-61:2011 Medical electrical equipment - Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment
$185.00 ISO 80601-2-67:2014 Medical electrical equipment - Part 2-67: Particular requirements for basic safety and essential performance of oxygen-conserving equipment
$185.00 ISO 80601-2-69:2014 Medical electrical equipment - Part 2-69: Particular requirements for basic safety and essential performance of oxygen concentrator equipment
$185.00 ISO 80601-2-70:2015 Medical Electrical Equipment - Part 2-70: Particular requirements for basic safety and essential performance of sleep apnoea breathing therapy equipment
$232.00 ISO 80601-2-72:2015 Medical electrical equipment - Part 2-72: Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients
$185.00 ISO 81060-1:2007 Non-invasive sphygmomanometers - Part 1: Requirements and test methods for non-automated measurement type
$185.00 ISO 81060-2:2013 Non-invasive sphygmomanometers - Part 2: Clinical investigation of automated measurement type
$185.00 ISO 8185:2007 Respiratory tract humidifiers for medical use - Particular requirements for respiratory humidification systems
$149.00 ISO 8359:1996 Oxygen concentrators for medical use -- Safety requirements
$22.00 ISO 8359/Amd1:2012 Oxygen concentrators for medical use - Safety requirements - Amendment 1
$68.00 ISO 8835-7:2011 Inhalational anaesthesia systems - Part 7: Anaesthetic systems for use in areas with limited logistical supplies of electricity and anaesthetic gases
$162.00 ISO 8836:2014 Suction catheters for use in the respiratory tract
$99.00 ISO 8836:2007 Suction catheters for use in the respiratory tract
$99.00 ISO 8836:2007 Suction catheters for use in the respiratory tract
$138.00 ISO 9170-1:2008 Terminal units for medical gas pipeline systems - Part 1: Terminal units for use with compressed medical gases and vacuum
$138.00 ISO 9170-2:2008 Terminal units for medical gas pipeline systems - Part 2: Terminal units for anaesthetic gas scavenging systems
$138.00 ISO 9360-1:2000 Anaesthetic and respiratory equipment - Heat and moisture exchangers (HMEs) for humidifying respired gases in humans - Part 1: HMEs for use with minimum tidal volumes of 250 ml
$68.00 ISO 9360-2:2001 Anaesthetic and respiratory equipment -- Heat and moisture exchangers (HMEs) for humidifying respired gases in humans -- Part 2: HMEs for use with tracheostomized patients having minimum tidal volumes of 250 ml
$19.00 ISO 18082:2014/Amd1:2017 - Amendment 1
$138.00 ISO 18562-1:2017 Biocompatibility evaluation of breathing gas pathways in healthcare applications - Part 1: Evaluation and testing within a risk management process
$103.00 ISO 18562-2:2017 Biocompatibility evaluation of breathing gas pathways in healthcare applications - Part 2: Tests for emissions of particulate matter
$68.00 ISO 18562-3:2017 Biocompatibility evaluation of breathing gas pathways in healthcare applications - Part 3: Tests for emissions of volatile organic compounds (VOCs)
$68.00 ISO 18562-4:2017 Biocompatibility evaluation of breathing gas pathways in healthcare applications - Part 4: Tests for leachables in condensate
$232.00 ISO 80601-2-74:2017 Medical electrical equipment - Part 2-74: Particular requirements for basic safety and essential performance of respiratory humidifying equipment
$138.00 ISO 9170-1:2017 Terminal units for medical gas pipeline systems - Part 1: Terminal units for use with compressed medical gases and vacuum
$138.00 ISO 10502:2012 Aerospace - Hose assemblies in polytetrafluoroethylene (PTFE) for use up to 232 °C and 10 500 kPa - Technical specifications and requirements
$173.00 ISO 10502:1992 Aerospace - Hose assemblies in polytetrafluoroethylene (PTFE) for use up to 232 degrees C and 10 500 kPa - Procurement specification
$68.00 ISO 11237:2010 Rubber hoses and hose assemblies - Compact wire-braid-reinforced hydraulic types for oil-based or water-based fluids - Specification
$45.00 ISO/TR 11340:1994 Rubber and rubber products - Hydraulic hose assemblies - External leakage classification for hydraulic systems
$68.00 ISO 11424:2017 Rubber hoses and tubing for air and vacuum systems for internal-combustion engines - Specification
$45.00 ISO 11424:1996 Rubber hoses and tubing for air and vacuum systems for internal-combustion engines - Specification
$68.00 ISO 11425:1996 Rubber hoses and hose assemblies for automobile power-steering systems - Specification
$68.00 ISO 11759:1999 Rubber hoses and hose assemblies for dispensing liquefied petroleum gases (LPGs) -- Specification
$68.00 ISO 12170:1996 Gas welding equipment - Thermoplastic hoses for welding and allied processes
$68.00 ISO 13363:2016 Rubber and plastics hoses for marine-engine wet-exhaust systems - Specification
$45.00 ISO 13774:1998 Rubber and plastics hoses for fuels for internal-combustion engines - Method of test for flammability
$103.00 ISO 13775-1:2015 Thermoplastic tubing and hoses for automotive use - Part 1: Non-fuel applications
$88.00 ISO 13775-1:2000 Thermoplastic tubing and hoses for automotive use - Part 1: Non-fuel applications
$138.00 ISO 13775-2:2016 Thermoplastic tubing and hoses for automotive use - Part 2: Petroleum-based-fuel applications
$123.00 ISO 13775-2:2000 Thermoplastic tubing and hoses for automotive use - Part 2: Petroleum-based-fuel applications
$68.00 ISO 1401:2016 Rubber hoses for agricultural spraying
$51.00 ISO 1401:1999 Rubber hoses for agricultural spraying
$103.00 ISO 14113:2013 Gas welding equipment - Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa)
$68.00 ISO 1436:2009 Rubber hoses and hose assemblies - Wire-braid-reinforced hydraulic types for oil-based or water-based fluids - Specification
$103.00 ISO 14557:2002 Fire-fighting hoses - Rubber and plastics suction hoses and hose assemblies
$19.00 ISO 14557/Amd1:2007 Fire-fighting hoses - Rubber and plastics suction hoses and hose assemblies - Amendment 1
$45.00 ISO 15540:2016 Ships and marine technology - Fire resistance of non-metallic hose assemblies and non-metallic compensators - Test methods
$68.00 ISO 15541:2016 Ships and marine technology - Fire resistance of non-metallic hose assemblies and non-metallic compensators - Requirements for the test bench
$88.00 ISO 15541:1999 Ships and marine technology -- Fire resistance of hose assemblies -- Requirements for the test bench
$103.00 ISO 16964:2015 Gas cylinders - Flexible hoses assemblies - Specification and testing
$103.00 ISO 17324:2014 Rubber hoses for automotive turbochargers - Specification
$138.00 ISO 1823:2015 Rubber hose and hose assemblies for oil suction and discharge service - Specification
$88.00 ISO 1823-1:1997 Rubber hoses and hose assemblies - Part 1: On-shore oil suction and discharge - Specification
$88.00 ISO 1823-2:1997 Rubber hoses and hose assemblies - Part 2: Ship/dockside discharge - Specification
$162.00 ISO 1825:2010 Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling - Specification
$103.00 ISO 19013-1:2005 Rubber hoses and tubing for fuel circuits for internal combustion engines - Specification - Part 1: Diesel fuels
$138.00 ISO 19013-2:2016 Rubber hoses and tubing for fuel circuits for internal combustion engines - Specification - Part 2: Gasoline fuels
$149.00 ISO 19013-2:2005 Rubber hoses and tubing for fuel circuits for internal combustion engines - Specification - Part 2: Gasoline fuels
$103.00 ISO 21012:2006 Cryogenic vessels - Hoses
$103.00 ISO 23297:2008 Thermoplastics hoses and hose assemblies - Wire or synthetic yarn reinforced single-pressure types for hydraulic applications - Specification
$138.00 ISO 27126:2014 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals - Specification
$103.00 ISO 27127:2014 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas - Specification
$103.00 ISO 28017:2011 Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications - Specification
$19.00 ISO 28017:2011/Amd1:2015 - Amendment 1
$68.00 ISO 2928:2003 Rubber hoses and hose assemblies for liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas up to 25 bar (2,5 MPa) -- Specification
$103.00 ISO 2929:2014 Rubber hoses and hose assemblies for bulk fuel delivery by truck - Specification
$103.00 ISO 3821:2008 Gas welding equipment - Rubber hoses for welding, cutting and allied processes
$45.00 ISO 3861:2005 Rubber hoses for sand and grit blasting - Specification
$103.00 ISO 3862:2009 Rubber hoses and hose assemblies - Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids - Specification
$103.00 ISO 3949:2009 Plastics hoses and hose assemblies - Textile-reinforced types for hydraulic applications - Specification
$103.00 ISO 3996:1995 Road vehicles - Brake hose assemblies for hydraulic braking systems used with non-petroleum-base brake fluid
$68.00 ISO 4038:1996 Road vehicles - Hydraulic braking systems - Simple flare pipes, tapped holes, male fittings and hose end fittings
$68.00 ISO 4079:2015 Rubber hoses and hose assemblies - Textile-reinforced hydraulic types for oil-based or water-based fluids - Specification
$103.00 ISO 4081:2016 Rubber hoses and tubing for cooling systems for internal-combustion engines - Specification
$123.00 ISO 4081:2010 Rubber hoses and tubing for cooling systems for internal-combustion engines - Specification
$103.00 ISO 4642-1:2015 Rubber and plastics hoses, non-collapsible, for fire-fighting service - Part 1: Semi-rigid hoses for fixed systems
$123.00 ISO 4642-1:2009 Rubber and plastics hoses, non-collapsible, for fire-fighting service - Part 1: Semi-rigid hoses for fixed systems
$173.00 ISO 4642-2:2009 Rubber and plastics hoses, non-collapsible, for fire-fighting service - Part 2: Semi-rigid hoses (and hose assemblies) for pumps and vehicles
$68.00 ISO 4671:2007 Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies
$19.00 ISO 4671/Amd1:2011 Rubber and plastics hose and hose assemblies - Methods of measurement of dimensions - Amendment 1: Clarification of position at which outside diameter is measured
$138.00 ISO 5359:2014 Anaesthetic and respiratory equipment - Low-pressure hose assemblies for use with medical gases
$156.00 ISO 5359:2008 Low-pressure hose assemblies for use with medical gases
$22.00 ISO 5359/Amd1:2011 Low-pressure flexible connecting assemblies (hose assemblies) for use with medical gas systems - Amendment 1
$103.00 ISO 5771:2008 Rubber hoses and hose assemblies for transferring anhydrous ammonia - Specification
$138.00 ISO 5772:2015 Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems - Specification
$88.00 ISO 5772:1998 Rubber hoses and hose assemblies for measured fuel dispensing - Specification
$103.00 ISO 6120:1995 Road vehicles - Brake hose assemblies for hydraulic braking systems used with petroleum-base brake fluid
$68.00 ISO 6605:2002 Hydraulic fluid power - Hoses and hose assemblies - Test methods
$45.00 ISO 6772:2012 Aerospace - Fluid systems - Impulse testing of hydraulic hose, tubing and fitting assemblies
$173.00 ISO 6772:1988 Aerospace - Fluid systems - Impulse testing of hydraulic hose, tubing and fitting assemblies
$103.00 ISO 6804:2016 Rubber and plastics inlet hoses and hose assemblies for washing-machines and dishwashers - Specification
$123.00 ISO 6804:2009 Rubber and plastics inlet hoses and hose assemblies for washing-machines and dishwashers - Specification
$123.00 ISO 6804:2009 Rubber and plastics inlet hoses and hose assemblies for washing-machines and dishwashers - Specification
$68.00 ISO 6805:1994 Rubber hoses and hose assemblies for underground mining - Wire-reinforced hydraulic types for coal mining - Specification
$68.00 ISO 6806:2014 Rubber hoses and hose assemblies for use in oil burners - Specification
$77.00 ISO 6806:1992 Rubber hoses and hose assemblies for use in oil burners - Specification
$68.00 ISO 6807:2003 Rubber hoses and hose assemblies for rotary drilling and vibration applications - Specification
$103.00 ISO 6808:2014 Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids - Specification
$99.00 ISO 6808:1999 Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids - Specification
$45.00 ISO 7258:1984 Polytetrafluoroethylene (PTFE) tubing for aerospace applications - Methods for the determination of the density and relative density
$68.00 ISO 7313:1984 Aircraft - High temperature convoluted hose assemblies in polytetrafluoroethylene (PTFE)
$45.00 ISO 8028:1999 Rubber and/or plastics hoses and hose assemblies for airless paint spraying -- Specification
$138.00 ISO 8066-2:2001 Rubber and plastics hoses and hose assemblies for automotive air conditioning - Specification - Part 2: Refrigerant 134a
$45.00 ISO 8207:1996 Gas welding equipment - Specification for hose assemblies for equipment for welding, cutting and allied processes
$68.00 ISO 8789:2009 Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles - Specification
$173.00 ISO 8829:1990 Aerospace - Polytetrafluoroethylene (PTFE) hose assemblies - Test methods
$138.00 ISO 8829-1:2009 Aerospace - Test methods for polytetrafluoroethylene (PTFE) inner-tube hose assemblies - Part 1: Metallic (stainless steel) braid
$138.00 ISO 8829-2:2006 Aerospace - Test methods for polytetrafluoroethylene (PTFE) inner-tube hose assemblies - Part 2: Non-metallic braid
$162.00 ISO 8913:2006 Aerospace - Lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 400 degrees F/3 000 psi (204 degrees C/20 684 kPa) and 204 degrees C/21 000 kPa (400 degrees F/3 046 psi) - Procurement specification
$173.00 ISO 8913:1994 Aerospace - Lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 204 degrees C/21 000 kPa - Procurement specification
$103.00 ISO 9528:1994 Aerospace - Standard-weight polytetrafluoroethylene (PTFE) hose assemblies, classification 204 degrees C/21 000 kPa - Procurement specification
$103.00 ISO 9938:1994 Aerospace - Polytetrafluoroethylene (PTFE) hose assemblies, classification 204 degrees C/28 000 kPa - Procurement specification
$87.00 JIS D 2602:2008 Rubber hoses and tubing for cooling systems for internal-combustion engines -- Specification
$49.00 JIS K 6330-7:2011 Rubber and plastics hoses -- Part 7: Assessment of ozone resistance under static conditions
$103.00 ISO 4079:2017 Rubber hoses and hose assemblies - Textile-reinforced hydraulic types for oil-based or water-based fluids - Specification
$103.00 ISO 6806:2017 Rubber hoses and hose assemblies for use in oil burners - Specification
$103.00 ISO 1436:2017 Rubber hoses and hose assemblies - Wire-braid-reinforced hydraulic types for oil-based or water-based fluids - Specification
$103.00 ISO 3862:2017 Rubber hoses and hose assemblies - Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids - Specification
$68.00 ISO 6605:2017 Hydraulic fluid power - Test methods for hoses and hose assemblies
$68.00 ISO 11237:2017 Rubber hoses and hose assemblies - Compact wire-braid-reinforced hydraulic types for oil-based or water-based fluids - Specification
$103.00 ISO 16301:2017 Rubber and plastics hoses and hose assemblies, wire- or textile-reinforced, for manually operated hydraulic jacks - Specification