ISO 4381:2011 - $45.00   BUY NOW

Plain bearings - Tin casting alloys for multilayer plain bearings

ISO 4381:2011 Publication Description:

ISO 4381:2011 specifies requirements for bearing metals based on tin casting alloys for multilayer plain bearings. The chemical composition and material properties refer to the original unprocessed material and are measured on representative samples. Testing results on final bearings can differ due to the influence of bearing production. Therefore, it is not intended that these results be compared with data given in ISO 4381:2011.

International Classification for Standards (ICS)

ICS Classification Field ICS Field Sub-Group and Number
ICS-21-Mechanical ICS Bearings-Plain (21.100.10)
ICS-77-Metallurgy ICS Lead Zinc Tin/Alloys (77.120.60)

ICS Related Standards

Cart Document Number Document Title
$45.00 ISO 10129:2006 Plain bearings - Testing of bearing metals - Resistance to corrosion by lubricants under static conditions
$68.00 ISO 11687-1:1995 Plain bearings - Pedestal plain bearings - Part 1: Pillow blocks
$68.00 ISO 11687-2:1995 Plain bearings - Pedestal plain bearings - Part 2: Side flange bearings
$68.00 ISO 11687-3:1995 Plain bearings - Pedestal plain bearings - Part 3: Centre flange bearings
$68.00 ISO 12128:2001 Plain bearings - Lubrication holes, grooves and pockets - Dimensions, types, designation and their application to bearing bushes
$45.00 ISO 12129-1:1995 Plain bearings - Part 1: Fits
$45.00 ISO 12129-2:1995 Plain bearings - Part 2: Tolerances on form and position and surface roughness for shafts, flanges and thrust collars
$138.00 ISO 12130-1:2001 Plain bearings - Hydrodynamic plain tilting pad thrust bearings under steady-state conditions - Part 1: Calculation of tilting pad thrust bearings
$68.00 ISO 12130-2:2013 Plain bearings - Hydrodynamic plain tilting pad thrust bearings under steady-state conditions - Part 2: Functions for calculation of tilting pad thrust bearings
$45.00 ISO 12130-3:2001 Plain bearings - Hydrodynamic plain tilting pad thrust bearings under steady-state conditions - Part 3: Guide values for the calculation of tilting pad thrust bearings
$138.00 ISO 12131-1:2001 Plain bearings -- Hydrodynamic plain thrust pad bearings under steady-state conditions -- Part 1: Calculation of thrust pad bearings
$68.00 ISO 12131-2:2016 Plain bearings - Hydrodynamic plain thrust pad bearings under steady-state conditions - Part 2: Functions for the calculation of thrust pad bearings
$88.00 ISO 12131-2:2001 Plain bearings -- Hydrodynamic plain thrust pad bearings under steady-state conditions -- Part 2: Functions for the calculation of thrust pad bearings
$45.00 ISO 12131-3:2001 Plain bearings -- Hydrodynamic plain thrust pad bearings under steady-state conditions -- Part 3: Guide values for the calculation of thrust pad bearings
$68.00 ISO 12132:1999 Plain bearings -- Quality assurance of thin- walled half bearings -- Design FMEA
$162.00 ISO 12167-1:2016 Plain bearings - Hydrostatic plain journal bearings with drainage grooves under steady-state conditions - Part 1: Calculation of oil-lubricated plain journal bearings with drainage grooves
$173.00 ISO 12167-1:2001 Plain bearings - Hydrostatic plain journal bearings with drainage grooves under steady-state conditions - Part 1: Calculation of oil-lubricated plain journal bearings with drainage grooves
$68.00 ISO 12167-2:2001 Plain bearings - Hydrostatic plain journal bearings with drainage grooves under steady-state conditions - Part 2: Characteristic values for the calculation of oil-lubricated plain journal bearings with drainage grooves
$162.00 ISO 12168-1:2001 Plain bearings - Hydrostatic plain journal bearings without drainage grooves under steady-state conditions - Part 1: Calculation of oil-lubricated plain journal bearings without drainage grooves
$103.00 ISO 12168-2:2001 Plain bearings - Hydrostatic plain journal bearings without drainage grooves under steady-state conditions - Part 2: Characteristic values for the calculation of oil-lubricated plain journal bearings without drainage grooves
$103.00 ISO 12240-1:1998 Spherical plain bearings - Part 1: Radial spherical plain bearings
$45.00 ISO 12240-2:1998 Spherical plain bearings - Part 2: Angular contact radial spherical plain bearings
$45.00 ISO 12240-3:1998 Spherical plain bearings - Part 3: Thrust spherical plain bearings
$68.00 ISO 12240-4:1998 Spherical plain bearings - Part 4: Spherical plain bearing rod ends
$185.00 ISO 12301:2007 Plain bearings - Quality control techniques and inspection of geometrical and material quality characteristics
$45.00 ISO 12302:1993 Plain bearings - Quality characteristics - Statistical process control (SPC)
$45.00 ISO 12303:1995 Plain bearings - Quality characteristics - Calculation of machine and process capabilities
$45.00 ISO 12308:1994 Plain bearings - Quality assurance - Sample types - Definitions, applications and testing
$68.00 ISO 13778:1999 Plain bearings -- Quality assurance of thin-walled half bearings -- Selective assembly of bearings to achieve a narrow clearance range
$103.00 ISO 13939:2012 Foil bearings - Guidelines for testing of the performance of foil journal bearings -Testing of load capacity, friction coefficient and lifetime
$45.00 ISO 14287:2012 Plain bearings - Pad materials for tilting pad bearings
$68.00 ISO 16287:2005 Plain bearings - Thermoplastic bushes - Dimensions and tolerances
$68.00 ISO/TR 17606:2014 Plain bearings - Lubrication characteristics of crosshead pin bearings for low-speed marine diesel engines
$68.00 ISO 19259:2015 Plain bearings - Bearings with embedded solid lubricants
$68.00 ISO 20054:2016 Plain bearings - Bearings containing dispersed solid lubricants
$45.00 ISO/TR 27507:2010 Plain bearings - Recommendations for automotive crankshaft bearing environments
$68.00 ISO 2795:2014 Plain bearings - Sintered bushes - Dimensions and tolerances
$103.00 ISO 3547-1:2006 Plain bearings - Wrapped bushes - Part 1: Dimensions
$103.00 ISO 3547-2:2017 Plain bearings - Wrapped bushes - Part 2: Test data for outside and inside diameters
$68.00 ISO 3547-2:2006 Plain bearings - Wrapped bushes - Part 2: Test data for outside and inside diameters
$68.00 ISO 3547-3:2017 Plain bearings - Wrapped bushes - Part 3: Lubrication holes, grooves and indentations
$68.00 ISO 3547-3:2006 Plain bearings - Wrapped bushes - Part 3: Lubrication holes, grooves and indentations
$45.00 ISO 3547-4:2017 Plain bearings - Wrapped bushes - Part 4: Materials
$45.00 ISO 3547-4:2006 Plain bearings - Wrapped bushes - Part 4: Materials
$103.00 ISO 3547-5:2007 Plain bearings - Wrapped bushes - Part 5: Checking the outside diameter
$45.00 ISO 3547-6:2007 Plain bearings - Wrapped bushes - Part 6: Checking the inside diameter
$45.00 ISO 3547-7:2007 Plain bearings - Wrapped bushes - Part 7: Measurement of wall thickness of thin-walled bushes
$132.00 ISO 3548:1999 Plain bearings -- Thin-walled half bearings with or without flange -- Tolerances, design features and methods of test
$138.00 ISO 3548-1:2014 Plain bearings - Thin-walled half bearings with or without flange - Part 1: Tolerances, design features and methods of test
$68.00 ISO 3548-2:2009 Plain bearings - Thin-walled half bearings with or without flange - Part 2: Measurement of wall thickness and flange thickness
$185.00 ISO 3548-3:2012 Plain bearings - Thin-walled half bearings with or without flange - Part 3: Measurement of peripheral length
$185.00 ISO 4378-1:2009 Plain bearings - Terms, definitions, classification and symbols - Part 1: Design, bearing materials and their properties
$103.00 ISO 4378-2:2009 Plain bearings - Terms, definitions, classification and symbols - Part 2: Friction and wear
$162.00 ISO 4378-3:2009 Plain bearings - Terms, definitions, classification and symbols - Part 3: Lubrication
$68.00 ISO 4378-4:2009 Plain bearings - Terms, definitions, classification and symbols - Part 4: Basic symbols
$138.00 ISO 4378-5:2009 Plain bearings - Terms, definitions, classification and symbols - Part 5: Application of symbols
$45.00 ISO/TR 4378-6:2012 Plain bearings - Terms, definitions, classification and symbols - Part 6: Abbreviated terms
$68.00 ISO 4379:1993 Plain bearings - Copper alloy bushes
$68.00 ISO 4382-1:1991 Plain bearings - Copper alloys - Part 1: Cast copper alloys for solid and multilayer thick-walled plain bearings
$45.00 ISO 4382-2:1991 Plain bearings - Copper alloys - Part 2 : Wrought copper alloys for solid plain bearings
$68.00 ISO 4383:2012 Plain bearings - Multilayer materials for thin-walled plain bearings
$45.00 ISO 4384-1:2012 Plain bearings - Hardness testing of bearing metals - Part 1: Multilayer bearings materials
$45.00 ISO 4384-2:2011 Plain bearings - Hardness testing of bearing metals - Part 2: Solid materials
$45.00 ISO 4385:1981 Plain bearings - Compression testing of metallic bearing materials
$68.00 ISO 4386-1:2012 Plain bearings - Metallic multilayer plain bearings - Part 1: Non-destructive ultrasonic testing of bond of thickness greater than or equal to 0,5 mm
$68.00 ISO 4386-2:2012 Plain bearings - Metallic multilayer plain bearings - Part 2: Destructive testing of bond for bearing metal layer thicknesses greater than or equal to 2 mm
$68.00 ISO 4386-3:1992 Plain bearings - Metallic multilayer plain bearings - Part 3: Non-destructive penetrant testing
$45.00 ISO 6279:2006 Plain bearings - Aluminium alloys for solid bearings
$45.00 ISO 6280:1981 Plain bearings - Requirements on backings for thick-walled multilayer bearings
$103.00 ISO 6281:2007 Plain bearings - Testing under conditions of hydrodynamic and mixed lubrication in test rigs
$45.00 ISO 6282:1983 Plain bearings - Metallic thin-walled half bearings - Determination of the sigma 0,01*-limit
$45.00 ISO 6525:1983 Plain bearings - Ring type thrust washers made from strip - Dimensions and tolerances
$45.00 ISO 6526:1983 Plain bearings - Pressed bimetallic half thrust washers - Features and tolerances
$138.00 ISO 6691:2000 Thermoplastic polymers for plain bearings -- Classification and designation
$0.00 ISO 6811/COR1:1999 Technical Corrigendum 1 to ISO 6811:1998
$185.00 ISO 6811:1998 Spherical plain bearings - Vocabulary
$209.00 ISO 7146-1:2008 Plain bearings - Appearance and characterization of damage to metallic hydrodynamic bearings - Part 1: General
$103.00 ISO 7146-2:2008 Plain bearings - Appearance and characterization of damage to metallic hydrodynamic bearings - Part 2: Cavitation erosion and its countermeasures
$68.00 ISO 7148-1:2012 Plain bearings - Testing of the tribological behaviour of bearing materials - Part 1: Testing of bearing metals
$138.00 ISO 7148-2:2012 Plain bearings - Testing of the tribological behaviour of bearing materials - Part 2: Testing of polymer-based bearing materials
$162.00 ISO 7902-1:2013 Hydrodynamic plain journal bearings under steady-state conditions - Circular cylindrical bearings - Part 1: Calculation procedure
$209.00 ISO 7902-2:1998 Hydrodynamic plain journal bearings under steady-state conditions - Circular cylindrical bearings - Part 2: Functions used in the calculation procedure
$68.00 ISO 7902-3:1998 Hydrodynamic plain journal bearings under steady-state conditions - Circular cylindrical bearings - Part 3: Permissible operational parameters
$68.00 ISO 7905-1:1995 Plain bearings - Bearing fatigue - Part 1: Plain bearings in test rigs and in applications under conditions of hydrodynamic lubrication
$45.00 ISO 7905-2:1995 Plain bearings - Bearing fatigue - Part 2: Test with a cylindrical specimen of a metallic bearing material
$45.00 ISO 7905-3:1995 Plain bearings - Bearing fatigue - Part 3: Test on plain strips of a metallic multilayer bearing material
$68.00 ISO 7905-4:1995 Plain bearings - Bearing fatigue - Part 4: Tests on half-bearings of a metallic multilayer bearing material
$194.00 JIS B 0161:1999 Spherical plain bearings -- Vocabulary
$45.00 ISO 10129:2017 Plain bearings - Testing of bearing metals - Resistance to corrosion by lubricants under static conditions
$68.00 ISO 12132:2017 Plain bearings - Quality assurance of thin-walled half bearings - Design FMEA
$45.00 ISO 12302:2017 Plain bearings - Quality characteristics - Statistical process control (SPC)
$45.00 ISO 12308:2017 Plain bearings - Quality assurance of sample types - Definitions, applications and testing
$68.00 ISO 13778:2017 Plain bearings - Quality assurance of thin-walled half bearings - Selective assembly of bearings to achieve a narrow clearance range
$185.00 ISO 4378-1:2017 Plain bearings - Terms, definitions, classification and symbols - Part 1: Design, bearing materials and their properties
$68.00 ISO 4378-2:2017 Plain bearings - Terms, definitions, classification and symbols - Part 2: Friction and wear
$138.00 ISO 4378-3:2017 Plain bearings - Terms, definitions, classification and symbols - Part 3: Lubrication
$45.00 ISO 6279:2017 Plain bearings - Aluminium alloys for solid bearings
$68.00 ISO 1169:2006 Zinc alloys - Determination of aluminium content - Titrimetric method
$68.00 ISO 15201:2006 Zinc and zinc alloys - Castings - Specifications
$51.00 ISO 1976:1975 Zinc alloys - Determination of copper content - Electrolytic method
$45.00 ISO 20081:2005 Zinc and zinc alloys - Method of sampling - Specifications
$68.00 ISO 301:2006 Zinc alloy ingots intended for castings
$68.00 ISO 3750:2006 Zinc alloys - Determination of magnesium content - Flame atomic absorption spectrometric method
$45.00 ISO 3815-1:2005 Zinc and zinc alloys - Part 1: Analysis of solid samples by optical emission spectrometry
$45.00 ISO 3815-2:2005 Zinc and zinc alloys - Part 2: Analysis by inductively coupled plasma optical emission spectrometry
$45.00 ISO 714:1975 Zinc - Determination of iron content - Photometric method
$45.00 ISO 752:2004 Zinc ingots
$39.00 JIS H 2107:2015 Zinc ingots
$16.00 JIS H 2107:1999 Zinc ingots
$39.00 JIS H 2201:2015 Zinc alloy ingots for die casting
$16.00 JIS H 2201:1999 Zinc alloy ingots for die casting
$29.00 JIS H 8619:1999 Electroplated coatings of tin
$29.00 JIS H 8624:1999 Electroplated coatings of Tin-Lead alloys