ISO 3822-1:1999 - $138.00   BUY NOW

Acoustics -- Laboratory tests on noise emission from appliances and equipment used in water supply installations -- Part 1: Method of measurement

ISO 3822-1:1999 Publication Description:

This part of EN ISO 3822 specifies a method of measurement, in the laboratory, of the noise emission resulting from the flow of water through appliances and equipment used in water supply installations.

The items covered include draw-off taps, in-line valves and special appliances, for example pressure reducers and water-heating appliances, all of which are hereafter referred to as “ appliances ”.

The method specified makes it possible to obtain comparable results of measurements in different laboratories.

International Classification for Standards (ICS)

ICS Classification Field ICS Field Sub-Group and Number
ICS-17-Metrology ICS Noise Emitted-Machines/Equipment (17.140.20)
ICS-91-Construction ICS Water Supply Systems (91.140.60)

ICS Related Standards

Cart Document Number Document Title
$162.00 ISO 10052:2004 Acoustics - Field measurements of airborne and impact sound insulation and of service equipment sound - Survey method
$19.00 ISO 10052/Amd1:2010 Acoustics - Field measurements of airborne and impact sound insulation and of service equipment sound - Survey method - Amendment 1
$185.00 ISO 10302-1:2011 Acoustics - Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices - Part 1: Airborne noise measurement
$138.00 ISO 10302-2:2011 Acoustics - Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices - Part 2: Structure-borne vibration measurements
$138.00 ISO 10494:1993 Gas turbines and gas turbine sets - Measurement of emitted airborne noise - Engineering/survey method
$138.00 ISO 10843:1997 Acoustics - Methods for the description and physical measurement of single impulses or series of impulses
$99.00 ISO 11094:1991 Acoustics - Test code for the measurement of airborne noise emitted by power lawn mowers, lawn tractors, lawn and garden tractors, professional mowers, and lawn and garden tractors with mowing attachments
$185.00 ISO 11200:2014 Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions
$0.00 ISO 11200/COR1:1997 Technical Corrigendum 1 to ISO 11200: 1995
$99.00 ISO 11200:1995 Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions
$162.00 ISO 11201:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
$185.00 ISO 11202:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections
$68.00 ISO 11203:1995 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level
$185.00 ISO 11204:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections
$138.00 ISO/TR 11688-1:1995 Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning
$185.00 ISO/TR 11688-2:1998 Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 2: Introduction to the physics of low-noise design
$103.00 ISO 11689:1996 Acoustics - Procedure for the comparison of noise-emission data for machinery and equipment
$103.00 ISO 12001:1996 Acoustics - Noise emitted by machinery and equipment - Rules for the drafting and presentation of a noise test code
$68.00 ISO 13261-1:1998 Sound power rating of air-conditioning and air-source heat pump equipment - Part 1: Non-ducted outdoor equipment
$68.00 ISO 13261-2:1998 Sound power rating of air-conditioning and air-source heat pump equipment - Part 2: Non-ducted indoor equipment
$103.00 ISO 13332:2000 Reciprocating internal combustion engines -- Test code for the measurement of structure-borne noise emitted from high-speed and medium-speed reciprocating internal combustion engines measured at the engine feet
$19.00 ISO 13347-1/Amd1:2010 Industrial fans - Determination of fan sound power levels under standardized laboratory conditions - Part 1: General overview - Amendment 1
$138.00 ISO 13347-3:2004 Industrial fans - Determination of fan sound power levels under standardized laboratory conditions - Part 3: Enveloping surface methods
$19.00 ISO 13347-3/Amd1:2010 Industrial fans - Determination of fan sound power levels under standardized laboratory conditions - Part 3: Enveloping surface methods
$138.00 ISO 13347-4:2004 Industrial fans - Determination of fan sound power levels under standardized laboratory conditions - Part 4: Sound intensity method
$138.00 ISO 13475-1:1999 Acoustics -- Stationary audible warning devices used outdoors -- Part 1: Field measurements for determination of sound emission quantities
$138.00 ISO/TS 13475-2:2000 Acoustics -- Stationary audible warning devices used outdoors -- Part 2: Precision methods for determination of sound emission quantities
$68.00 ISO 15086-1:2001 Hydraulic fluid power - Determination of the fluid-borne noise characteristics of components and systems - Part 1: Introduction
$162.00 ISO 15086-2:2000 Hydraulic fluid power - Determination of the fluid-borne noise characteristics of components and systems - Part 2: Measurement of the speed of sound in a fluid in a pipe
$138.00 ISO 15086-3:2008 Hydraulic fluid power - Determination of the fluid-borne noise characteristics of components and systems - Part 3: Measurement of hydraulic impedance
$138.00 ISO 15664:2001 Acoustics -- Noise control design procedures for open plant
$185.00 ISO 15665:2003 Acoustics -- Acoustic insulation for pipes, valves and flanges
$138.00 ISO 15744:2002 Hand-held non-electric power tools - Noise measurement code - Engineering method (grade 2)
$138.00 ISO 16032:2004 Acoustics - Measurement of sound pressure level from service equipment in buildings - Engineering method
$138.00 ISO 1680:2013 Acoustics - Test code for the measurement of airborne noise emitted by rotating electrical machines
$68.00 ISO 16902-1:2003 Hydraulic fluid power - Test code for the determination of sound power levels of pumps using sound intensity techniques: Engineering method - Part 1: Pumps
$185.00 ISO 17201-1:2005 Acoustics - Noise from shooting ranges - Part 1: Determination of muzzle blast by measurement
$162.00 ISO 17201-2:2006 Acoustics - Noise from shooting ranges - Part 2: Estimation of muzzle blast and projectile sound by calculation
$209.00 ISO 17201-3:2010 Acoustics - Noise from shooting ranges - Part 3: Guidelines for sound propagation calculations
$138.00 ISO 17201-4:2006 Acoustics - Noise from shooting ranges - Part 4: Prediction of projectile sound
$138.00 ISO 17201-5:2010 Acoustics - Noise from shooting ranges - Part 5: Noise management
$103.00 ISO 18564:2016 Machinery for forestry - Noise test code
$138.00 ISO 20361:2015 Liquid pumps and pump units - Noise test code - Grades 2 and 3 of accuracy
$149.00 ISO 20361:2007 Liquid pumps and pump units - Noise test code - Grades 2 and 3 of accuracy
$138.00 ISO 2151:2004 Acoustics - Noise test code for compressors and vacuum pumps - Engineering method (Grade 2)
$68.00 ISO 22096:2007 Condition monitoring and diagnostics of machines - Acoustic emission
$162.00 ISO 22868:2011 Forestry and gardening machinery - Noise test code for portable hand-held machines with internal combustion engine - Engineering method (Grade 2 accuracy)
$162.00 ISO 230-5:2000 Test code for machine tools -- Part 5: Determination of the noise emission
$162.00 ISO 23771:2015 Textile machinery - Guide to the design of textile machinery for reduction of the noise emissions
$185.00 ISO 27327-2:2014 Fans - Air curtain units - Part 2: Laboratory methods of testing for sound power
$19.00 ISO 3822-1/Amd1:2008 Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 1: Method of measurement - Amendment 1: Measurement uncertainty
$45.00 ISO 3822-2:1995 Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 2: Mounting and operating conditions for draw-off taps and mixing valves
$68.00 ISO 3822-3:1997 Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 3: Mounting and operating conditions for in-line valves and appliances
$19.00 ISO 3822-3/Amd1:2009 Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 3: Mounting and operating conditions for in-line valves and appliances - Amendment 1
$138.00 ISO 3822-4:1997 Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 4: Mounting and operating conditions for special appliances
$138.00 ISO 4412-1:1991 Hydraulic fluid power - Test code for determination of airborne noise levels - Part 1: Pumps
$138.00 ISO 4412-2:1991 Hydraulic fluid power - Test code for determination of airborne noise levels - Part 2: Motors
$68.00 ISO 4412-3:1991 Hydraulic fluid power - Test code for determination of airborne noise levels - Part 3: Pumps - Method using a parallelepiped microphone array
$103.00 ISO 4871:1996 Acoustics -- Declaration and verification of noise emission values of machinery and equipment
$103.00 ISO 5131:2015 Tractors for agriculture and forestry - Measurement of noise at the operators position - Survey method
$88.00 ISO 5131:1996 Acoustics -- Tractors and machinery for agriculture and forestry -- Measurement of noise at the operator's position -- Survey method
$103.00 ISO 5135:1997 Acoustics - Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation room
$209.00 ISO 5136:2003 Acoustics - Determination of sound power radiated into a duct by fans and other air-moving devices - In-duct method
$138.00 ISO 6393:2008 Earth-moving machinery - Determination of sound power level - Stationary test conditions
$68.00 ISO 6394:2008 Earth-moving machinery - Determination of emission sound pressure level at operators position - Stationary test conditions
$185.00 ISO 6395:2008 Earth-moving machinery - Determination of sound power level - Dynamic test conditions
$173.00 ISO 6395:1988 Acoustics -- Measurement of exterior noise emitted by earth-moving machinery -- Dynamic test conditions
$173.00 ISO 6395/AMD1:1996 Amendment 1 to ISO 6395:1988
$68.00 ISO 6396:2008 Earth-moving machinery - Determination of emission sound pressure level at operators position - Dynamic test conditions
$173.00 ISO 6396:1992 Acoustics -- Measurement at the operator's position of noise emitted by earth-moving machinery -- Dynamic test conditions
$103.00 ISO 6798:1995 Reciprocating internal combustion engines -- Measurement of emitted airborne noise -- Engineering method and survey method
$45.00 ISO 7216:2015 Agricultural and forestry tractors - Measurement of noise emitted when in motion
$51.00 ISO 7216:1992 Acoustics -- Agricultural and forestry wheeled tractors and self-propelled machines -- Measurement of noise emitted when in motion
$45.00 ISO 7574-1:1985 Acoustics - Statistical methods for determining and verifying stated noise emission values of machinery and equipment - Part 1 : General considerations and definitions
$45.00 ISO 7574-2:1985 Acoustics - Statistical methods for determining and verifying stated noise emission values of machinery and equipment - Part 2 : Methods for stated values for individual machines
$45.00 ISO 7574-3:1985 Acoustics - Statistical methods for determining and verifying stated noise emission values of machinery and equipment - Part 3 : Simple (transition) method for stated values for batches of machines
$103.00 ISO 7574-4:1985 Acoustics - Statistical methods for determining and verifying stated noise emission values of machinery and equipment - Part 4 : Methods for stated values for batches of machines
$209.00 ISO 7779:2010 Acoustics - Measurement of airborne noise emitted by information technology and telecommunications equipment
$138.00 ISO/TS 7849-1:2009 Acoustics - Determination of airborne sound power levels emitted by machinery using vibration measurement - Part 1: Survey method using a fixed radiation factor
$162.00 ISO/TS 7849-2:2009 Acoustics - Determination of airborne sound power levels emitted by machinery using vibration measurement - Part 2: Engineering method including determination of the adequate radiation factor
$232.00 ISO 7960:1995 Airborne noise emitted by machine tools - Operating conditions for woodworking machines
$68.00 ISO 8297:1994 Acoustics - Determination of sound power levels of multisource industrial plants for evaluation of sound pressure levels in the environment - Engineering method
$138.00 ISO 8525:2008 Airborne noise emitted by machine tools - Operating conditions for metal-cutting machines
$103.00 ISO 8528-10:1998 Reciprocating internal combustion engine driven alternating current generating sets - Part 10: Measurement of airborne noise by the enveloping surface method
$209.00 ISO 8579-1:2002 Acceptance code for gear units - Part 1: Test code for airborne sound
$103.00 ISO 9295:2015 Acoustics - Determination of high-frequency sound power levels emitted by machinery and equipment
$88.00 ISO 9295:1988 Acoustics - Measurement of high-frequency noise emitted by computer and business equipment
$68.00 ISO 9296:1988 Acoustics - Declared noise emission values of computer and business equipment
$45.00 ISO 9568:1993 Cinematography - Background acoustic noise levels in theatres, review rooms and dubbing rooms
$138.00 ISO 9611:1996 Acoustics - Characterization of sources of structure-borne sound with respect to sound radiation from connected structures - Measurement of velocity at the contact points of machinery when resiliently mounted
$68.00 ISO 9902-1:2001 Textile machinery -- Noise test code -- Part 1: Common requirements
$19.00 ISO 9902-1/Amd1:2009 Textile machinery - Noise test code - Part 1: Common requirements - Amendment 1
$19.00 ISO 9902-1:2001/Amd2:2014 - Amendment 2
$103.00 ISO 9902-2:2001 Textile machinery -- Noise test code -- Part 2: Spinning preparatory and spinning machinery
$19.00 ISO 9902-2/Amd1:2009 Textile machinery - Noise test code - Part 2: Spinning preparatory and spinning machinery - Amendment 1
$19.00 ISO 9902-2:2001/Amd2:2014 - Amendment 2
$68.00 ISO 9902-3:2001 Textile machinery -- Noise test code -- Part 3: Nonwoven machinery
$19.00 ISO 9902-3/Amd1:2009 Textile machinery - Noise test code - Part 3: Nonwoven machinery - Amendment 1
$19.00 ISO 9902-3:2001/Amd2:2014 - Amendment 2
$68.00 ISO 9902-4:2001 Textile machinery -- Noise test code -- Part 4: Yarn processing, cordage and rope manufacturing machinery
$19.00 ISO 9902-4/Amd1:2009 Textile machinery - Noise test code - Part 4: Yarn processing, cordage and rope manufacturing machinery - Amendment 1
$19.00 ISO 9902-4:2001/Amd2:2014 - Amendment 2
$45.00 ISO 9902-5:2001 Textile machinery -- Noise test code -- Part 5: Weaving and knitting preparatory machinery
$19.00 ISO 9902-5/Amd1:2009 Textile machinery - Noise test code - Part 5: Weaving and knitting preparatory machinery - Amendment 1
$19.00 ISO 9902-5:2001/Amd2:2014 - Amendment 2
$103.00 ISO 9902-6:2001 Textile machinery -- Noise test code -- Part 6: Fabric manufacturing machinery
$19.00 ISO 9902-6/Amd1:2009 Textile machinery - Noise test code - Part 6: Fabric manufacturing machinery - Amendment 1
$19.00 ISO 9902-6:2001/Amd2:2014 - Amendment 2
$103.00 ISO 9902-7:2001 Textile machinery -- Noise test code -- Part 7: Dyeing and finishing machinery
$19.00 ISO 9902-7/Amd1:2009 Textile machinery - Noise test code - Part 7: Dyeing and finishing machinery - Amendment 1
$19.00 ISO 9902-7:2001/Amd2:2014 - Amendment 2
$107.00 JIS B 1753:2013 Acceptance code for gear units -- Test code for airborne sound
$103.00 ISO 9296:2017 Acoustics - Declared noise emission values of information technology and telecommunications equipment
$68.00 ISO 10508:2006 Plastics piping systems for hot and cold water installations - Guidance for classification and design
$209.00 ISO 10639:2004 Plastics piping systems for pressure and non-pressure water supply - Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
$19.00 ISO 10639/Amd1:2011 Plastics piping systems for pressure and non-pressure water supply - Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin - Amendment 1
$45.00 ISO 11177:2016 Vitreous and porcelain enamels - Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply - Quality requirements and testing
$45.00 ISO 13056:2011 Plastics piping systems - Pressure systems for hot and cold water - Test method for leaktightness under vacuum
$45.00 ISO 13844:2015 Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with plastic pressure pipes - Test method for leaktightness under negative pressure, angular deflection and deformation
$51.00 ISO 13844:2000 Plastics piping systems - Elastomeric-sealing-ring-type socket joints of unplasticized poly(vinyl chloride) (PVC-U) for use with PVC-U pipes - Test method for leaktightness under negative pressure
$45.00 ISO 13845:2015 Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with thermoplastic pressure pipes - Test method for leaktightness under internal pressure and with angular deflection
$51.00 ISO 13845:2000 Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for leaktightness under internal pressure and with angular deflection
$51.00 ISO 13845:2000 Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for leaktightness under internal pressure and with angular deflection
$123.00 ISO 14236:2000 Plastics pipes and fittings - Mechanical-joint compression fittings for use with polyethylene pressure pipes in water supply systems
$68.00 ISO 1452-1:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: General
$138.00 ISO 1452-2:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Pipes
$185.00 ISO 1452-3:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 3: Fittings
$68.00 ISO 1452-4:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 4: Valves
$103.00 ISO 1452-5:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 5: Fitness for purpose of the system
$68.00 ISO 15874-1:2013 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1: General
$103.00 ISO 15874-2:2013 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes
$103.00 ISO 15874-3:2013 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings
$68.00 ISO 15874-5:2013 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 5: Fitness for purpose of the system
$68.00 ISO/TS 15874-7:2003 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 7: Guidance for the assessment of conformity
$68.00 ISO 15875-1:2003 Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 1: General
$19.00 ISO 15875-1/Amd1:2007 Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 1: General - Amendment 1
$68.00 ISO 15875-2:2003 Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 2: Pipes
$19.00 ISO 15875-2/Amd1:2007 Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 2: Pipes - Amendment 1
$68.00 ISO 15875-3:2003 Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings
$68.00 ISO 15875-5:2003 Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 5: Fitness for purpose of the system
$68.00 ISO/TS 15875-7:2003 Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 7: Guidance for the assessment of conformity
$68.00 ISO 15876-1:2017 Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 1: General
$88.00 ISO 15876-1:2003 Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 1: General
$22.00 ISO 15876-1/Amd1:2007 Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 1: General - Amendment 1
$103.00 ISO 15876-2:2017 Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 2: Pipes
$88.00 ISO 15876-2:2003 Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 2: Pipes
$22.00 ISO 15876-2/Amd1:2007 Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 2: Pipes - Amendment 1
$103.00 ISO 15876-3:2017 Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings
$88.00 ISO 15876-3:2003 Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 3: Fittings
$68.00 ISO 15876-5:2017 Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 5: Fitness for purpose of the system
$88.00 ISO 15876-5:2003 Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 5: Fitness for purpose of the system
$68.00 ISO/TS 15876-7:2003 Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 7: Guidance for the assessment of conformity
$68.00 ISO 15877-1:2009 Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: General
$19.00 ISO 15877-1/Amd1:2010 Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: General - Amendment 1
$103.00 ISO 15877-2:2009 Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Pipes
$19.00 ISO 15877-2/Amd1:2010 Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Pipes - Amendment 1
$138.00 ISO 15877-3:2009 Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings
$19.00 ISO 15877-3/Amd1:2010 Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings - Amendment 1
$68.00 ISO 15877-5:2009 Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 5: Fitness for purpose of the system
$19.00 ISO 15877-5/Amd1:2010 Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 5: Fitness for purpose of the system - Amendment 1
$103.00 ISO/TS 15877-7:2009 Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 7: Guidance for the assessment of conformity
$138.00 ISO 16422:2014 Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure - Specifications
$185.00 ISO 16631:2016 Ductile iron pipes, fittings, accessories and their joints compatible with plastic (PVC or PE) piping systems, for water applications and for plastic pipeline connections, repair and replacement
$68.00 ISO 21003-1:2008 Multilayer piping systems for hot and cold water installations inside buildings - Part 1: General
$103.00 ISO 21003-2:2008 Multilayer piping systems for hot and cold water installations inside buildings - Part 2: Pipes
$19.00 ISO 21003-2/Amd1:2011 Multilayer piping systems for hot and cold water installations inside buildings - Part 2: Pipes - Amendment 1
$68.00 ISO 21003-3:2008 Multilayer piping systems for hot and cold water installations inside buildings - Part 3: Fittings
$68.00 ISO 21003-5:2008 Multilayer piping systems for hot and cold water installations inside buildings - Part 5: Fitness for purpose of the system
$103.00 ISO/TS 21003-7:2008 Multilayer piping systems for hot and cold water installations inside buildings - Part 7: Guidance for the assessment of conformity
$19.00 ISO/TS 21003-7/Amd1:2010 Multilayer piping systems for hot and cold water installations inside buildings - Part 7: Guidance for the assessment of conformity - Anendment 1
$209.00 ISO 22158:2011 Input/output protocols and electronic interfaces for water meters - Requirements
$68.00 ISO 22391-1:2009 Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 1: General
$103.00 ISO 22391-2:2009 Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 2: Pipes
$103.00 ISO 22391-3:2009 Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings
$68.00 ISO 22391-5:2009 Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 5: Fitness for purpose of the system
$103.00 ISO/TS 22391-7:2011 Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 7: Guidance for the assessment of conformity
$68.00 ISO 23711:2003 Elastomeric seals - Requirements for materials for pipe joint seals used in water and drainage applications - Thermoplastic elastomers
$209.00 ISO 2531:2009 Ductile iron pipes, fittings, accessories and their joints for water applications
$209.00 ISO 25780:2011 Plastics piping systems for pressure and non-pressure water supply, irrigation, drainage or sewerage - Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin - Pipes with flexible joints intended to be installed using jacking techniques
$45.00 ISO/TR 27165:2012 Thermoplastics piping systems - Guidance for definitions of wall constructions for pipes
$45.00 ISO 3114:1977 Unplasticized polyvinyl chloride (PVC) pipes for potable water supply - Extractability of lead and tin - Test method
$19.00 ISO 3822-1/Amd1:2008 Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 1: Method of measurement - Amendment 1: Measurement uncertainty
$45.00 ISO 3822-2:1995 Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 2: Mounting and operating conditions for draw-off taps and mixing valves
$68.00 ISO 3822-3:1997 Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 3: Mounting and operating conditions for in-line valves and appliances
$19.00 ISO 3822-3/Amd1:2009 Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 3: Mounting and operating conditions for in-line valves and appliances - Amendment 1
$138.00 ISO 3822-4:1997 Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 4: Mounting and operating conditions for special appliances
$185.00 ISO 4064-1:2014 Water meters for cold potable water and hot water - Part 1: Metrological and technical requirements
$189.00 ISO 4064-1:2005 Measurement of water flow in fully charged closed conduits - Meters for cold potable water and hot water - Part 1: Specifications
$232.00 ISO 4064-2:2014 Water meters for cold potable water and hot water - Part 2: Test methods
$88.00 ISO 4064-2:2005 Measurement of water flow in fully charged closed conduits - Meters for cold potable water and hot water - Part 2: Installation requirements
$209.00 ISO 4064-3:2014 Water meters for cold potable water and hot water - Part 3: Test report format
$240.00 ISO 4064-3:2005 Measurement of water flow in fully charged closed conduits - Meters for cold potable water and hot water - Part 3: Test methods and equipment
$138.00 ISO 4064-4:2014 Water meters for cold potable water and hot water - Part 4: Non-metrological requirements not covered in ISO 4064-1
$68.00 ISO 4064-5:2014 Water meters for cold potable water and hot water - Part 5: Installation requirements
$185.00 ISO/TR 4191:2014 Plastics piping systems for water supply - Unplasticized poly(vinyl chloride)(PVC-U) and oriented PVC-U (PVC-O) - Guidance for installation
$103.00 ISO 4427-1:2007 Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - Part 1: General
$19.00 ISO 4427-1:2007/Amd1:2015 - Amendment 1: Melt mass-flow rate (MFR) for PE 80 and PE 100
$103.00 ISO 4427-2:2007 Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - Part 2: Pipes
$19.00 ISO 4427-2:2007/Amd1:2014 - Amendment 1
$162.00 ISO 4427-3:2007 Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - Part 3: Fittings
$68.00 ISO 4427-5:2007 Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - Part 5: Fitness for purpose of the system
$68.00 ISO 4633:2015 Rubber seals - Joint rings for water supply, drainage and sewerage pipelines - Specification for materials
$88.00 ISO 4633:2002 Rubber seals - Joint rings for water supply, drainage and sewerage pipelines - Specification for materials
$103.00 ISO 559:1991 Steel tubes for water and sewage
$103.00 ISO 8795:2001 Plastics piping systems for the transport of water intended for human consumption -- Migration assessment -- Determination of migration values of plastics pipes and fittings and their joints
$9.00 JIS K 6770:2004/AMENDMENT 3:2010 Crosslinked polyethylene (PE-X) pipe fittings (Amendment 3)
$10.00 JIS K 6777:2007/AMENDMENT 2:2010 Chlorinated poly (vinyl chloride) (PVC-C) pipe fittings for hot and cold water supply (Amendment 2)
$10.00 JIS K 6779:2004/AMENDMENT 2:2010 Polybutene (PB) pipe fittings (Amendment 2)
$10.00 JIS K 6787:2004/AMENDMENT 2:2013 Crosslinked polyethylene (PE-X) pipes for water supply (Amendment 2)
$9.00 JIS K 6788:2004/AMENDMENT 2:2010 Crosslinked polyethylene (PE-X) pipe fittings for water supply (Amendment 2)
$10.00 JIS K 6793:2004/AMENDMENT 2:2010 Polybutene (PB) pipe fittings for water supply (Amendment 2)
$29.00 JIS S 3200-1:1997 Equipment to water supply service -- Test methods of hydrostatic pressure
$10.00 JIS S 3200-1:1997/AMENDMENT 1:2012 Equipment for water supply service -- Test methods of hydrostatic pressure (Amendment 1)
$10.00 JIS S 3200-5:1997/AMENDMENT 1:2012 Equipment for water supply service -- Test methods of destruction by vacuum pressure (Amendment 1)
$15.00 JIS S 3200-7:2004/AMENDMENT 2:2010 Equipment for water supply service -- Test methods of effect to water quality (Amendment 2)
$209.00 ISO 10639:2017 Plastics piping systems for pressure and non-pressure water supply - Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin