ISO 28902-2:2017 - $185.00   BUY NOW

Air quality - Environmental meteorology - Part 2: Ground-based remote sensing of wind by heterodyne pulsed Doppler lidar

ISO 28902-2:2017 Publication Description:

ISO 28902-2:2017 specifies the requirements and performance test procedures for heterodyne pulsed Doppler lidar techniques and presents their advantages and limitations. The term "Doppler lidar" used in this document applies solely to heterodyne pulsed lidar systems retrieving wind measurements from the scattering of laser light onto aerosols in the atmosphere. A description of performances and limits are described based on standard atmospheric conditions.

This document describes the determination of the line-of-sight wind velocity (radial wind velocity).

NOTE Derivation of wind vector from individual line-of-sight measurements is not described in this document since it is highly specific to a particular wind lidar configuration. One example of the retrieval of the wind vector can be found in Annex B.

ISO 28902-2:2017 does not address the retrieval of the wind vector.

ISO 28902-2:2017 may be used for the following application areas:

- meteorological briefing for, e.g. aviation, airport safety, marine applications and oil platforms;

- wind power production, e.g. site assessment and power curve determination;

- routine measurements of wind profiles at meteorological stations;

- air pollution dispersion monitoring;

- industrial risk management (direct data monitoring or by assimilation into micro-scale flow models);

- exchange processes (greenhouse gas emissions).

ISO 28902-2:2017 addresses manufacturers of heterodyne pulsed Doppler wind lidars, as well as bodies testing and certifying their conformity. Also, this document provides recommendations for the users to make adequate use of these instruments.

International Classification for Standards (ICS)

ICS Classification Field ICS Field Sub-Group and Number
ICS-07-Mathematics ICS Geology Meteorology Hydrology (07.060)

ICS Related Standards

Cart Document Number Document Title
$162.00 ISO/TR 13973:2014 Artificial recharge to groundwater
$185.00 ISO/TR 14685:2001 Hydrometric determinations - Geophysical logging of boreholes for hydrogeological purposes - Considerations and guidelines for making measurements
$209.00 ISO 14686:2003 Hydrometric determinations - Pumping tests for water wells - Considerations and guidelines for design, performance and use
$138.00 ISO 15927-1:2003 Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 1: Monthly means of single meteorological elements
$68.00 ISO 15927-2:2009 Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 2: Hourly data for design cooling load
$103.00 ISO 15927-3:2009 Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 3: Calculation of a driving rain index for vertical surfaces from hourly wind and rain data
$45.00 ISO 15927-4:2005 Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 4: Hourly data for assessing the annual energy use for heating and cooling
$45.00 ISO 15927-5:2004 Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 5: Data for design heat load for space heating
$19.00 ISO 15927-5/Amd1:2011 Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 5: Data for design heat load for space heating - Amendment 1
$103.00 ISO 15927-6:2007 Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 6: Accumulated temperature differences (degree-days)
$103.00 ISO 16457:2014 Space systems - Space environment (natural and artificial) - The Earths ionosphere model: international reference ionosphere (IRI) model and extensions to the plasmasphere
$138.00 ISO 16622:2002 Meteorology - Sonic anemometers/thermometers - Acceptance test methods for mean wind measurements
$103.00 ISO 17713-1:2007 Meteorology - Wind measurements - Part 1: Wind tunnel test methods for rotating anemometer performance
$138.00 ISO 17714:2007 Meteorology - Air temperature measurements - Test methods for comparing the performance of thermometer shields/screens and defining important characteristics
$103.00 ISO 19289:2015 Air quality - Meteorology - Siting classifications for surface observing stations on land
$162.00 ISO 21413:2005 Manual methods for the measurement of a groundwater level in a well
$209.00 ISO/TR 21414:2016 Hydrometry - Groundwater - Surface geophysical surveys for hydrogeological purposes
$209.00 ISO/TR 23211:2009 Hydrometry - Measuring the water level in a well using automated pressure transducer methods
$232.00 ISO 2533:1975 Standard Atmosphere
$209.00 ISO 2533/ADD1:1985 Addendum 1 to ISO 2533:1975 Hypsometrical tables
$232.00 ISO 2533/ADD2:1997 ADDENDUM 2 to ISO 2533:1975 Extension to - 5000 m and standard atmosphere as a function of altitude in feet
$162.00 ISO 28902-1:2012 Air quality - Environmental meteorology - Part 1: Ground-based remote sensing of visual range by lidar
$45.00 ISO 710-1:1974 Graphical symbols for use on detailed maps, plans and geological cross-sections -- Part 1: General rules of representation
$68.00 ISO 710-2:1974 Graphical symbols for use on detailed maps, plans and geological cross-sections -- Part 2: Representation of sedimentary rocks
$45.00 ISO 710-3:1974 Graphical symbols for use on detailed maps, plans and geological cross-sections -- Part 3: Representation of magmatic rocks
$45.00 ISO 710-4:1982 Graphical symbols for use on detailed maps, plans and geological cross-sections -- Part 4 : Representation of metamorphic rocks
$45.00 ISO 710-5:1989 Graphical symbols for use on detailed maps, plans and geological cross-sections -- Part 5: Representation of minerals
$45.00 ISO 710-6:1984 Graphical symbols for use on detailed maps, plans and geological cross-sections -- Part 6 : Representation of contact rocks and rocks which have undergone metasomatic, pneumatolytic or hydrothermal transformation or transformation by weathering
$68.00 ISO 710-7:1984 Graphical symbols for use on detailed maps, plans and geological cross-sections -- Part 7 : Tectonic symbols
$138.00 ISO 17717:2017 Meteorological balloons - Specification