ISO 2490:2007 - $68.00   BUY NOW

Solid (monobloc) gear hobs with tenon drive or axial keyway, 0,5 to 40 module - Nominal dimensions

ISO 2490:2007 Publication Description:

ISO 2490:2007 specifies the nominal dimensions of general-purpose single-start solid (monobloc) gear hobs with axial keyway or tenon drive of 0,5 to 40 module.

These hobs are intended for the production of gears which conform to ISO 54:1996 and present a 20ΓΈ pressure angle in conformity with ISO 53:1998.

International Classification for Standards (ICS)

ICS Classification Field ICS Field Sub-Group and Number
ICS-21-Mechanical ICS Gears (21.200)

ICS Related Standards

Cart Document Number Document Title
$185.00 ISO/TR 10064-1:1992 Cylindrical gears - Code of inspection practice - Part 1: Inspection of corresponding flanks of gear teeth
$138.00 ISO/TR 10064-2:1996 Cylindrical gears - Code of inspection practice - Part 2: Inspection related to radial composite deviations, runout, tooth thickness and backlash
$45.00 ISO/TR 10064-3:1996 Cylindrical gears - Code of inspection practice - Part 3: Recommendations relative to gear blanks, shaft centre distance and parallelism of axes
$138.00 ISO/TR 10064-4:1998 Cylindrical gears - Code of inspection practice - Part 4: Recommendations relative to surface texture and tooth contact pattern checking
$232.00 ISO/TR 10064-5:2005 Cylindrical gears - Code of inspection practice - Part 5: Recommendations relative to evaluation of gear measuring instruments
$185.00 ISO/TR 10064-6:2009 Code of inspection practice - Part 6: Bevel gear measurement methods
$209.00 ISO 10300-1:2014 Calculation of load capacity of bevel gears - Part 1: Introduction and general influence factors
$162.00 ISO 10300-2:2014 Calculation of load capacity of bevel gears - Part 2: Calculation of surface durability (pitting)
$185.00 ISO 10300-3:2014 Calculation of load capacity of bevel gears - Part 3: Calculation of tooth root strength
$209.00 ISO 10825:1995 Gears - Wear and damage to gear teeth - Terminology
$232.00 ISO/TR 10828:2015 Worm gears - Worm profiles and gear mesh geometry
$149.00 ISO/TR 10828:1997 Worm gears - Geometry of worm profiles
$209.00 ISO 1122-1:1998 Vocabulary of gear terms - Part 1: Definitions related to geometry
$138.00 ISO 1122-2:1999 Vocabulary of gear terms - Part 2: Definitions related to worm gear geometry
$185.00 ISO 1328-1:2013 Cylindrical gears - ISO system of flank tolerance classification - Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth
$68.00 ISO 1328-2:1997 Cylindrical gears - ISO system of accuracy - Part 2: Definitions and allowable values of deviations relevant to radial composite deviations and runout information
$51.00 ISO 1340:1976 Cylindrical gears - Information to be given to the manufacturer by the purchaser in order to obtain the gear required
$51.00 ISO 1341:1976 Straight bevel gears - Information to be given to the manufacturer by the purchaser in order to obtain the gear required
$209.00 ISO 13691:2001 Petroleum and natural gas industries - High-speed special-purpose gear units
$103.00 ISO 14104:2014 Gears - Surface temper etch inspection after grinding, chemical method
$66.00 ISO 14104:1995 Gears - Surface temper etch inspection after grinding
$162.00 ISO/TR 14179-1:2001 Gears - Thermal capacity - Part 1: Rating gear drives with thermal equilibrium at 95 oC sump temperature
$162.00 ISO/TR 14179-2:2001 Gears - Thermal capacity - Part 2: Thermal load-carrying capacity
$232.00 ISO/TR 14521:2010 Gears - Calculation of load capacity of wormgears
$103.00 ISO 14635-1:2000 Gears -- FZG test procedures -- Part 1: FZG test method A/8,3/90 for relative scuffing load-carrying capacity of oils
$138.00 ISO 14635-2:2004 Gears - FZG test procedures - Part 2: FZG step load test A10/16, 6R/120 for relative scuffing load-carrying capacity of high EP oils
$138.00 ISO 14635-3:2005 Gears - FZG test procedures - Part 3: FZG test method A/2,8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases
$162.00 ISO/TR 15144-1:2014 Calculation of micropitting load capacity of cylindrical spur and helical gears - Part 1: Introduction and basic principles
$211.00 ISO/TR 15144-1:2010 Calculation of micropitting load capacity of cylindrical spur and helical gears - Part 1: Introduction and basic principles
$185.00 ISO/TR 15144-2:2014 Calculation of micro-pitting load capacity of cylindrical spur and helical gears - Part 2: Examples of calculation for micropitting
$162.00 ISO 17485:2006 Bevel gears - ISO system of accuracy
$138.00 ISO 18653:2003 Gears - Evaluation of instruments for the measurement of individual gears
$209.00 ISO/TR 18792:2008 Lubrication of industrial gear drives
$232.00 ISO 21771:2007 Gears - Cylindrical involute gears and gear pairs - Concepts and geometry
$45.00 ISO 2203:1973 Technical drawings - Conventional representation of gears
$185.00 ISO/TR 22849:2011 Design recommendations for bevel gears
$232.00 ISO 23509:2016 Bevel and hypoid gear geometry
$265.00 ISO 23509:2006 Bevel and hypoid gear geometry
$162.00 ISO 4468:2009 Gear hobs - Accuracy requirements
$45.00 ISO 53:1998 Cylindrical gears for general and heavy engineering -- Standard basic rack tooth profile
$45.00 ISO 54:1996 Cylindrical gears for general engineering and for heavy engineering - Modules
$232.00 ISO 6336-1:2006 Calculation of load capacity of spur and helical gears - Part 1: Basic principles, introduction and general influence factors
$162.00 ISO 6336-2:2006 Calculation of load capacity of spur and helical gears - Part 2: Calculation of surface durability (pitting)
$185.00 ISO 6336-3:2006 Calculation of load capacity of spur and helical gears - Part 3: Calculation of tooth bending strength
$185.00 ISO 6336-5:2016 Calculation of load capacity of spur and helical gears - Part 5: Strength and quality of materials
$200.00 ISO 6336-5:2003 Calculation of load capacity of spur and helical gears - Part 5: Strength and quality of materials
$138.00 ISO 6336-6:2006 Calculation of load capacity of spur and helical gears - Part 6: Calculation of service life under variable load
$45.00 ISO 677:1976 Straight bevel gears for general engineering and heavy engineering - Basic rack
$45.00 ISO 678:1976 Straight bevel gears for general engineering and heavy engineering - Modules and diametral pitches
$45.00 ISO 701:1998 International gear notation - Symbols for geometrical data
$209.00 ISO 8579-1:2002 Acceptance code for gear units - Part 1: Test code for airborne sound
$123.00 ISO 8579-2:1993 Acceptance code for gears - Part 2: Determination of mechanical vibrations of gear units during acceptance testing
$209.00 ISO 9083:2001 Calculation of load capacity of spur and helical gears - Application to marine gears
$209.00 ISO 9085:2002 Calculation of load capacity of spur and helical gears - Application for industrial gears
$39.00 JIS B 0121:2012 International gear notation -- Symbols for geometrical data
$339.00 JIS B 1603:1995 Straight cylindrical involute splines -- side fit -- Generalities, dimensions and inspection
$49.00 JIS B 1701-1:2012 Cylindrical gears for general and heavy engineering -- Part 1: Standard basic rack tooth profile
$29.00 JIS B 1701-2:1999 Cylindrical gears for general engineering and for heavy engineering -- Part 2: Modules
$107.00 JIS B 1702-1:2016 Cylindrical gears -- ISO system of flank tolerance classification -- Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth
$59.00 JIS B 1702-1:1998 Cylindrical gears -- ISO system of accuracy -- Part 1: Definitions and allowable values of deviations relevant to corresponding flanks of gear teeth
$68.00 JIS B 1702-2:1998 Cylindrical gears -- ISO system of accuracy -- Part 2: Definitions and allowable values of deviations relevant to radial composite deviations and runout information
$49.00 JIS B 1706-1:1999 Straight bevel gear for general engineering -- Part 1: Basic rack
$29.00 JIS B 1706-2:1999 Straight bevel gears for general engineering and heavy engineering Part 2: Modules and diametral pitches
$107.00 JIS B 1753:2013 Acceptance code for gear units -- Test code for airborne sound
$107.00 JIS B 1754:1998 Acceptance code for gears -- Part 2: Determination of mechanical vibrations of gear units during acceptance testing
$103.00 ISO 14104:2017 Gears - Surface temper etch inspection after grinding, chemical method
$232.00 ISO/TR 10064-1:2017 Code of inspection practice - Part 1: Measurement of cylindrical gear tooth flanks