ISO 2203:1973 - $45.00   BUY NOW

Technical drawings - Conventional representation of gears

ISO 2203:1973 Publication Description:

Establishes how to draw the toothed portion of gears including worm gearing and chain wheels. Applicable to detail drawings (individual gears) and assembly drawings (gear pairs). As a fundamental principle a gear is represented (except in axial section) as a solid part without teeth, but with the addition of the pitch surface in a thin long dash-and-dot line. For uniformity all figures are in first angle projection.

International Classification for Standards (ICS)

ICS Classification Field ICS Field Sub-Group and Number
ICS-01-Generalities ICS Drawings-Mechanical Engineering (01.100.20)
ICS-21-Mechanical ICS Gears (21.200)

ICS Related Standards

Cart Document Number Document Title
$138.00 ISO 10110-1:2006 Optics and photonics - Preparation of drawings for optical elements and systems - Part 1: General
$68.00 ISO 10110-10:2004 Optics and photonics - Preparation of drawings for optical elements and systems - Part 10: Table representing data of optical elements and cemented assemblies
$45.00 ISO 10110-11:2016 Optics and photonics - Preparation of drawings for optical elements and systems - Part 11: Non-toleranced data
$51.00 ISO 10110-11:1996 Optics and optical instruments -- Preparation of drawings for optical elements and systems -- Part 11: Non-toleranced data
$103.00 ISO 10110-12:2007 Optics and photonics - Preparation of drawings for optical elements and systems - Part 12: Aspheric surfaces
$19.00 ISO 10110-12:2007/Amd1:2013 - Amendment 1
$68.00 ISO 10110-14:2007 Optics and photonics - Preparation of drawings for optical elements and systems - Part 14: Wavefront deformation tolerance
$45.00 ISO 10110-17:2004 Optics and photonics - Preparation of drawings for optical elements and systems - Part 17: Laser irradiation damage threshold
$68.00 ISO 10110-19:2015 Optics and photonics - Preparation of drawings for optical elements and systems - Part 19: General description of surfaces and components
$45.00 ISO 10110-2:1996 Optics and optical instruments -- Preparation of drawings for optical elements and systems -- Part 2: Material imperfections -- Stress birefringence
$45.00 ISO 10110-3:1996 Optics and optical instruments -- Preparation of drawings for optical elements and systems -- Part 3: Material imperfections -- Bubbles and inclusions
$45.00 ISO 10110-4:1997 Optics and optical instruments -- Preparation of drawings for optical elements and systems -- Part 4: Material imperfections -- Inhomogeneity and striae
$138.00 ISO 10110-5:2015 Optics and photonics - Preparation of drawings for optical elements and systems - Part 5: Surface form tolerances
$88.00 ISO 10110-5:2007 Optics and photonics - Preparation of drawings for optical elements and systems - Part 5: Surface form tolerances
$88.00 ISO 10110-5:2007 Optics and photonics - Preparation of drawings for optical elements and systems - Part 5: Surface form tolerances
$138.00 ISO 10110-6:2015 Optics and photonics - Preparation of drawings for optical elements and systems - Part 6: Centring tolerances
$0.00 ISO 10110-6/COR1:1999 Technical Corrigendum 1 to ISO 10110-6:1996
$88.00 ISO 10110-6:1996 Optics and optical instruments -- Preparation of drawings for optical elements and systems -- Part 6: Centring tolerances
$45.00 ISO 10110-7:2008 Optics and photonics - Preparation of drawings for optical elements and systems - Part 7: Surface imperfection tolerances
$138.00 ISO 10110-8:2010 Optics and photonics - Preparation of drawings for optical elements and systems - Part 8: Surface texture; roughness and waviness
$68.00 ISO 10110-9:2016 Optics and photonics - Preparation of drawings for optical elements and systems - Part 9: Surface treatment and coating
$51.00 ISO 10110-9:1996 Optics and optical instruments -- Preparation of drawings for optical elements and systems -- Part 9: Surface treatment and coating
$209.00 ISO 10135:2007 Geometrical product specifications (GPS) - Drawing indications for moulded parts in technical product documentation (TPD)
$45.00 ISO 10579:2010 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Non-rigid parts
$232.00 ISO 1101:2017 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out
$232.00 ISO 1101:2012 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out
$68.00 ISO 128-15:2013 Technical product documentation (TPD) - General principles of presentation - Part 15: Presentation of shipbuilding drawings
$103.00 ISO 128-24:2014 Technical drawings - General principles of presentation - Part 24: Lines on mechanical engineering drawings
$68.00 ISO 128-25:1999 Technical drawings -- General principles of presentation -- Part 25: Lines on shipbuilding drawings
$103.00 ISO 128-34:2001 Technical drawings -- General principles of presentation -- Part 34: Views on mechanical engineering drawings
$68.00 ISO 128-44:2001 Technical drawings -- General principles of presentation -- Part 44: Sections on mechanical engineering drawings
$68.00 ISO/TS 128-71:2010 Technical product documentation (TPD) - General principles of presentation - Part 71: Simplified representation for mechanical engineering drawings
$185.00 ISO 1302:2002 Geometrical Product Specifications (GPS) - Indication of surface texture in technical product documentation
$68.00 ISO 13444:2012 Technical product documentation (TPD) - Dimensioning and indication of knurling
$103.00 ISO 13715:2000 Technical drawings -- Edges of undefined shape -- Vocabulary and indications
$88.00 ISO 14660-2:1999 Geometrical Product Specifications (GPS) -- Geometrical features -- Part 2: Extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feature
$68.00 ISO 15785:2002 Technical drawings - Symbolic presentation and indication of adhesive, fold and pressed joints
$103.00 ISO 15786:2008 Technical drawings - Simplified representation and dimensioning of holes
$162.00 ISO 15787:2016 Technical product documentation - Heat-treated ferrous parts - Presentation and indications
$173.00 ISO 15787:2001 Technical product documentation - Heat-treated ferrous parts - Presentation and indications
$138.00 ISO 16249:2013 Springs - Symbols
$185.00 ISO 1660:2017 Geometrical product specifications (GPS) - Geometrical tolerancing - Profile tolerancing
$45.00 ISO 1660:1987 Technical drawings -- Dimensioning and tolerancing of profiles
$138.00 ISO 17599:2015 Technical product documentation (TPD) - General requirements of digital mock-up for mechanical products
$68.00 ISO 18388:2016 Technical product documentation (TPD) - Relief grooves - Types and dimensioning
$45.00 ISO 2162-1:1993 Technical product documentation - Springs - Part 1: Simplified representation
$68.00 ISO 2162-2:1993 Technical product documentation - Springs - Part 2: Presentation of data for cylindrical helical compression springs
$209.00 ISO 2553:2013 Welding and allied processes - Symbolic representation on drawings - Welded joints
$185.00 ISO 2692:2014 Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
$165.00 ISO 2692:2006 Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
$138.00 ISO 3040:2016 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones
$88.00 ISO 3040:2009 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones
$45.00 ISO 5261:1995 Technical drawings -- Simplified representation of bars and profile sections
$232.00 ISO 5459:2011 Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum systems
$45.00 ISO 5845-1:1995 Technical drawings - Simplified representation of the assembly of parts with fasteners - Part 1: General principles
$68.00 ISO 5845-2:1995 Technical drawings - Simplified representation of the assembly of parts with fasteners - Part 2: Rivets for aerospace equipment
$68.00 ISO 6410-1:1993 Technical drawings - Screw threads and threaded parts - Part 1: General conventions
$45.00 ISO 6410-2:1993 Technical drawings - Screw threads and threaded parts - Part 2: Screw thread inserts
$45.00 ISO 6410-3:1993 Technical drawings - Screw threads and threaded parts - Part 3: Simplified representation
$45.00 ISO 6411:1982 Technical drawings -- Simplified representation of centre holes
$45.00 ISO 6413:1988 Technical drawings - Representation of splines and serrations
$68.00 ISO 7083:1983 Technical drawings -- Symbols for geometrical tolerancing -- Proportions and dimensions
$68.00 ISO 8015:2011 Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules
$45.00 ISO 8826-1:1989 Technical drawings - Rolling bearings - Part 1: General simplified representation
$68.00 ISO 8826-2:1994 Technical drawings - Rolling bearings - Part 2: Detailed simplified representation
$45.00 ISO 9222-1:1989 Technical drawings - Seals for dynamic application - Part 1: General simplified representation
$68.00 ISO 9222-2:1989 Technical drawings - Seals for dynamic application - Part 2: Detailed simplified representation
$174.00 JIS B 0001:2010 Technical drawings for mechanical engineering
$68.00 JIS B 0002-1:1998 Technical drawings -- Screw threads and threaded Parts -- Part 1: General conventions
$49.00 JIS B 0002-2:1998 Technical drawings -- Screw threads and threaded Parts -- Part 2: Screw thread inserts
$49.00 JIS B 0002-3:1998 Technical drawings -- Screw threads and threaded Parts -- Part 3: Simplified representation
$107.00 JIS B 0004:2007 Technical representation of springs
$49.00 JIS B 0005-1:1999 Technical drawings -- Rolling bearings -- Part 1: General simplified representation
$68.00 JIS B 0005-2:1999 Technical drawings -- Rolling bearings -- Part 2: Detailed simplified representation
$49.00 JIS B 0006:1993 Technical drawings -- Representation of splines and serrations
$39.00 JIS B 0025:1998 Technical drawings -- Geometrical tolerancing -- Positional tolerancing
$29.00 JIS B 0026:1998 Technical drawings -- Dimensioning and tolerancing -- Non-rigid parts
$49.00 JIS B 0027:2000 Technical drawings -- Dimensioning and tolerancing of profiles
$29.00 JIS B 0028:2000 Technical drawings -- Dimensioning and tolerancing -- Cones
$29.00 JIS B 0029:2000 Technical drawings -- Tolerancing of orientation and location -- Projected tolerance zone
$194.00 JIS B 0031:2003 Geometrical Product Specifications (GPS) -- Indication of surface texture in technical product documentation
$49.00 JIS B 0041:1999 Technical drawings -- Simplified representation of centre holes
$39.00 JIS B 0672-1:2002 Geometrical Product Specifications (GPS) -- Geometrical features -- Part 1: General terms and definitions
$68.00 JIS B 0672-2:2002 Geometrical Product Specifications (GPS) -- Geometrical features -- Part 2: Extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feature
$107.00 JIS Z 3021:2010 Welding and allied processes -- Symbolic representation
$68.00 ISO 10110-7:2017 Optics and photonics - Preparation of drawings for optical elements and systems - Part 7: Surface imperfections
$138.00 ISO 13715:2017 Technical product documentation - Edges of undefined shape - Indication and dimensioning
$185.00 ISO/TR 10064-1:1992 Cylindrical gears - Code of inspection practice - Part 1: Inspection of corresponding flanks of gear teeth
$138.00 ISO/TR 10064-2:1996 Cylindrical gears - Code of inspection practice - Part 2: Inspection related to radial composite deviations, runout, tooth thickness and backlash
$45.00 ISO/TR 10064-3:1996 Cylindrical gears - Code of inspection practice - Part 3: Recommendations relative to gear blanks, shaft centre distance and parallelism of axes
$138.00 ISO/TR 10064-4:1998 Cylindrical gears - Code of inspection practice - Part 4: Recommendations relative to surface texture and tooth contact pattern checking
$232.00 ISO/TR 10064-5:2005 Cylindrical gears - Code of inspection practice - Part 5: Recommendations relative to evaluation of gear measuring instruments
$185.00 ISO/TR 10064-6:2009 Code of inspection practice - Part 6: Bevel gear measurement methods
$209.00 ISO 10300-1:2014 Calculation of load capacity of bevel gears - Part 1: Introduction and general influence factors
$162.00 ISO 10300-2:2014 Calculation of load capacity of bevel gears - Part 2: Calculation of surface durability (pitting)
$185.00 ISO 10300-3:2014 Calculation of load capacity of bevel gears - Part 3: Calculation of tooth root strength
$209.00 ISO 10825:1995 Gears - Wear and damage to gear teeth - Terminology
$232.00 ISO/TR 10828:2015 Worm gears - Worm profiles and gear mesh geometry
$149.00 ISO/TR 10828:1997 Worm gears - Geometry of worm profiles
$209.00 ISO 1122-1:1998 Vocabulary of gear terms - Part 1: Definitions related to geometry
$138.00 ISO 1122-2:1999 Vocabulary of gear terms - Part 2: Definitions related to worm gear geometry
$185.00 ISO 1328-1:2013 Cylindrical gears - ISO system of flank tolerance classification - Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth
$68.00 ISO 1328-2:1997 Cylindrical gears - ISO system of accuracy - Part 2: Definitions and allowable values of deviations relevant to radial composite deviations and runout information
$51.00 ISO 1340:1976 Cylindrical gears - Information to be given to the manufacturer by the purchaser in order to obtain the gear required
$51.00 ISO 1341:1976 Straight bevel gears - Information to be given to the manufacturer by the purchaser in order to obtain the gear required
$209.00 ISO 13691:2001 Petroleum and natural gas industries - High-speed special-purpose gear units
$103.00 ISO 14104:2014 Gears - Surface temper etch inspection after grinding, chemical method
$66.00 ISO 14104:1995 Gears - Surface temper etch inspection after grinding
$162.00 ISO/TR 14179-1:2001 Gears - Thermal capacity - Part 1: Rating gear drives with thermal equilibrium at 95 oC sump temperature
$162.00 ISO/TR 14179-2:2001 Gears - Thermal capacity - Part 2: Thermal load-carrying capacity
$232.00 ISO/TR 14521:2010 Gears - Calculation of load capacity of wormgears
$103.00 ISO 14635-1:2000 Gears -- FZG test procedures -- Part 1: FZG test method A/8,3/90 for relative scuffing load-carrying capacity of oils
$138.00 ISO 14635-2:2004 Gears - FZG test procedures - Part 2: FZG step load test A10/16, 6R/120 for relative scuffing load-carrying capacity of high EP oils
$138.00 ISO 14635-3:2005 Gears - FZG test procedures - Part 3: FZG test method A/2,8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases
$162.00 ISO/TR 15144-1:2014 Calculation of micropitting load capacity of cylindrical spur and helical gears - Part 1: Introduction and basic principles
$211.00 ISO/TR 15144-1:2010 Calculation of micropitting load capacity of cylindrical spur and helical gears - Part 1: Introduction and basic principles
$185.00 ISO/TR 15144-2:2014 Calculation of micro-pitting load capacity of cylindrical spur and helical gears - Part 2: Examples of calculation for micropitting
$162.00 ISO 17485:2006 Bevel gears - ISO system of accuracy
$138.00 ISO 18653:2003 Gears - Evaluation of instruments for the measurement of individual gears
$209.00 ISO/TR 18792:2008 Lubrication of industrial gear drives
$232.00 ISO 21771:2007 Gears - Cylindrical involute gears and gear pairs - Concepts and geometry
$185.00 ISO/TR 22849:2011 Design recommendations for bevel gears
$232.00 ISO 23509:2016 Bevel and hypoid gear geometry
$265.00 ISO 23509:2006 Bevel and hypoid gear geometry
$68.00 ISO 2490:2007 Solid (monobloc) gear hobs with tenon drive or axial keyway, 0,5 to 40 module - Nominal dimensions
$162.00 ISO 4468:2009 Gear hobs - Accuracy requirements
$45.00 ISO 53:1998 Cylindrical gears for general and heavy engineering -- Standard basic rack tooth profile
$45.00 ISO 54:1996 Cylindrical gears for general engineering and for heavy engineering - Modules
$232.00 ISO 6336-1:2006 Calculation of load capacity of spur and helical gears - Part 1: Basic principles, introduction and general influence factors
$162.00 ISO 6336-2:2006 Calculation of load capacity of spur and helical gears - Part 2: Calculation of surface durability (pitting)
$185.00 ISO 6336-3:2006 Calculation of load capacity of spur and helical gears - Part 3: Calculation of tooth bending strength
$185.00 ISO 6336-5:2016 Calculation of load capacity of spur and helical gears - Part 5: Strength and quality of materials
$200.00 ISO 6336-5:2003 Calculation of load capacity of spur and helical gears - Part 5: Strength and quality of materials
$138.00 ISO 6336-6:2006 Calculation of load capacity of spur and helical gears - Part 6: Calculation of service life under variable load
$45.00 ISO 677:1976 Straight bevel gears for general engineering and heavy engineering - Basic rack
$45.00 ISO 678:1976 Straight bevel gears for general engineering and heavy engineering - Modules and diametral pitches
$45.00 ISO 701:1998 International gear notation - Symbols for geometrical data
$209.00 ISO 8579-1:2002 Acceptance code for gear units - Part 1: Test code for airborne sound
$123.00 ISO 8579-2:1993 Acceptance code for gears - Part 2: Determination of mechanical vibrations of gear units during acceptance testing
$209.00 ISO 9083:2001 Calculation of load capacity of spur and helical gears - Application to marine gears
$209.00 ISO 9085:2002 Calculation of load capacity of spur and helical gears - Application for industrial gears
$39.00 JIS B 0121:2012 International gear notation -- Symbols for geometrical data
$339.00 JIS B 1603:1995 Straight cylindrical involute splines -- side fit -- Generalities, dimensions and inspection
$49.00 JIS B 1701-1:2012 Cylindrical gears for general and heavy engineering -- Part 1: Standard basic rack tooth profile
$29.00 JIS B 1701-2:1999 Cylindrical gears for general engineering and for heavy engineering -- Part 2: Modules
$107.00 JIS B 1702-1:2016 Cylindrical gears -- ISO system of flank tolerance classification -- Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth
$59.00 JIS B 1702-1:1998 Cylindrical gears -- ISO system of accuracy -- Part 1: Definitions and allowable values of deviations relevant to corresponding flanks of gear teeth
$68.00 JIS B 1702-2:1998 Cylindrical gears -- ISO system of accuracy -- Part 2: Definitions and allowable values of deviations relevant to radial composite deviations and runout information
$49.00 JIS B 1706-1:1999 Straight bevel gear for general engineering -- Part 1: Basic rack
$29.00 JIS B 1706-2:1999 Straight bevel gears for general engineering and heavy engineering Part 2: Modules and diametral pitches
$107.00 JIS B 1753:2013 Acceptance code for gear units -- Test code for airborne sound
$107.00 JIS B 1754:1998 Acceptance code for gears -- Part 2: Determination of mechanical vibrations of gear units during acceptance testing
$103.00 ISO 14104:2017 Gears - Surface temper etch inspection after grinding, chemical method
$232.00 ISO/TR 10064-1:2017 Code of inspection practice - Part 1: Measurement of cylindrical gear tooth flanks