ISO 21012:2006 - $103.00   BUY NOW

Cryogenic vessels - Hoses

ISO 21012:2006 Publication Description:

ISO 21012:2006 gives design, construction, type and production testing, and marking requirements for non-insulated cryogenic flexible hoses used for the transfer of cryogenic fluids within the following range of operating conditions:

  • working temperature: from minus 270 °C to minus 65 °C;
  • nominal size (DN): from 10 to 100.

End fittings for mounting of any couplings are within the scope of this International Standard, but the couplings are subject to other standards.

International Classification for Standards (ICS)

ICS Classification Field ICS Field Sub-Group and Number
ICS-23-Fluid ICS Cryogenic Vessels (23.020.40)
ICS-83-Rubber ICS Hoses (83.140.40)

ICS Related Standards

Cart Document Number Document Title
$103.00 ISO 12991:2012 Liquefied natural gas (LNG) - Tanks for on-board storage as a fuel for automotive vehicles
$232.00 ISO 20421-1:2006 Cryogenic vessels - Large transportable vacuum-insulated vessels - Part 1: Design, fabrication, inspection and testing
$103.00 ISO 20421-2:2017 Cryogenic vessels - Large transportable vacuum-insulated vessels - Part 2: Operational requirements
$103.00 ISO 20421-2:2005 Cryogenic vessels - Large transportable vacuum-insulated vessels - Part 2: Operational requirements
$232.00 ISO 21009-1:2008 Cryogenic vessels - Static vacuum-insulated vessels - Part 1: Design, fabrication, inspection and tests
$103.00 ISO 21009-2:2015 Cryogenic vessels - Static vacuum insulated vessels - Part 2: Operational requirements
$123.00 ISO 21009-2:2006 Cryogenic vessels - Static vacuum insulated vessels - Part 2: Operational requirements
$232.00 ISO 21010:2014 Cryogenic vessels - Gas/materials compatibility
$68.00 ISO 21011:2008 Cryogenic vessels - Valves for cryogenic service
$68.00 ISO 21013-1:2008 Cryogenic vessels - Pressure-relief accessories for cryogenic service - Part 1: Reclosable pressure-relief valves
$45.00 ISO 21013-2:2007 Cryogenic vessels - Pressure-relief accessories for cryogenic service - Part 2: Non-reclosable pressure-relief devices
$162.00 ISO 21013-3:2016 Cryogenic vessels - Pressure-relief accessories for cryogenic service - Part 3: Sizing and capacity determination
$88.00 ISO 21013-3:2006 Cryogenic vessels - Pressure-relief accessories for cryogenic service - Part 3: Sizing and capacity determination
$68.00 ISO 21013-4:2012 Cryogenic vessels - Pilot operated pressure relief devices - Part 4: Pressure-relief accessories for cryogenic service
$103.00 ISO 21014:2006 Cryogenic vessels - Cryogenic insulation performance
$68.00 ISO 21028-1:2016 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1: Temperatures below -80 degrees C
$51.00 ISO 21028-1:2004 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1: Temperatures below -80 degrees C
$138.00 ISO 21028-2:2004 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 2: Temperatures between -80 degrees C and -20 degrees C
$232.00 ISO 21029-1:2004 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1 000 litres volume - Part 1: Design, fabrication, inspection and tests
$103.00 ISO 21029-2:2015 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1 000 litres volume - Part 2: Operational requirements
$123.00 ISO 21029-2:2004 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1 000 litres volume - Part 2: Operational requirements
$68.00 ISO 23208:2005 Cryogenic vessels - Cleanliness for cryogenic service
$103.00 ISO 24490:2016 Cryogenic vessels - Pumps for cryogenic service
$123.00 ISO 24490:2005 Cryogenic vessels - Pumps for cryogenic service
$68.00 ISO 23208:2017 Cryogenic vessels - Cleanliness for cryogenic service
$138.00 ISO 10502:2012 Aerospace - Hose assemblies in polytetrafluoroethylene (PTFE) for use up to 232 °C and 10 500 kPa - Technical specifications and requirements
$173.00 ISO 10502:1992 Aerospace - Hose assemblies in polytetrafluoroethylene (PTFE) for use up to 232 degrees C and 10 500 kPa - Procurement specification
$68.00 ISO 11237:2010 Rubber hoses and hose assemblies - Compact wire-braid-reinforced hydraulic types for oil-based or water-based fluids - Specification
$45.00 ISO/TR 11340:1994 Rubber and rubber products - Hydraulic hose assemblies - External leakage classification for hydraulic systems
$68.00 ISO 11424:2017 Rubber hoses and tubing for air and vacuum systems for internal-combustion engines - Specification
$45.00 ISO 11424:1996 Rubber hoses and tubing for air and vacuum systems for internal-combustion engines - Specification
$68.00 ISO 11425:1996 Rubber hoses and hose assemblies for automobile power-steering systems - Specification
$68.00 ISO 11759:1999 Rubber hoses and hose assemblies for dispensing liquefied petroleum gases (LPGs) -- Specification
$68.00 ISO 12170:1996 Gas welding equipment - Thermoplastic hoses for welding and allied processes
$68.00 ISO 13363:2016 Rubber and plastics hoses for marine-engine wet-exhaust systems - Specification
$45.00 ISO 13774:1998 Rubber and plastics hoses for fuels for internal-combustion engines - Method of test for flammability
$103.00 ISO 13775-1:2015 Thermoplastic tubing and hoses for automotive use - Part 1: Non-fuel applications
$88.00 ISO 13775-1:2000 Thermoplastic tubing and hoses for automotive use - Part 1: Non-fuel applications
$138.00 ISO 13775-2:2016 Thermoplastic tubing and hoses for automotive use - Part 2: Petroleum-based-fuel applications
$123.00 ISO 13775-2:2000 Thermoplastic tubing and hoses for automotive use - Part 2: Petroleum-based-fuel applications
$68.00 ISO 1401:2016 Rubber hoses for agricultural spraying
$51.00 ISO 1401:1999 Rubber hoses for agricultural spraying
$103.00 ISO 14113:2013 Gas welding equipment - Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa)
$68.00 ISO 1436:2009 Rubber hoses and hose assemblies - Wire-braid-reinforced hydraulic types for oil-based or water-based fluids - Specification
$103.00 ISO 14557:2002 Fire-fighting hoses - Rubber and plastics suction hoses and hose assemblies
$19.00 ISO 14557/Amd1:2007 Fire-fighting hoses - Rubber and plastics suction hoses and hose assemblies - Amendment 1
$45.00 ISO 15540:2016 Ships and marine technology - Fire resistance of non-metallic hose assemblies and non-metallic compensators - Test methods
$68.00 ISO 15541:2016 Ships and marine technology - Fire resistance of non-metallic hose assemblies and non-metallic compensators - Requirements for the test bench
$88.00 ISO 15541:1999 Ships and marine technology -- Fire resistance of hose assemblies -- Requirements for the test bench
$103.00 ISO 16964:2015 Gas cylinders - Flexible hoses assemblies - Specification and testing
$103.00 ISO 17324:2014 Rubber hoses for automotive turbochargers - Specification
$138.00 ISO 1823:2015 Rubber hose and hose assemblies for oil suction and discharge service - Specification
$88.00 ISO 1823-1:1997 Rubber hoses and hose assemblies - Part 1: On-shore oil suction and discharge - Specification
$88.00 ISO 1823-2:1997 Rubber hoses and hose assemblies - Part 2: Ship/dockside discharge - Specification
$162.00 ISO 1825:2010 Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling - Specification
$103.00 ISO 19013-1:2005 Rubber hoses and tubing for fuel circuits for internal combustion engines - Specification - Part 1: Diesel fuels
$138.00 ISO 19013-2:2016 Rubber hoses and tubing for fuel circuits for internal combustion engines - Specification - Part 2: Gasoline fuels
$149.00 ISO 19013-2:2005 Rubber hoses and tubing for fuel circuits for internal combustion engines - Specification - Part 2: Gasoline fuels
$103.00 ISO 23297:2008 Thermoplastics hoses and hose assemblies - Wire or synthetic yarn reinforced single-pressure types for hydraulic applications - Specification
$138.00 ISO 27126:2014 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals - Specification
$103.00 ISO 27127:2014 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas - Specification
$103.00 ISO 28017:2011 Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications - Specification
$19.00 ISO 28017:2011/Amd1:2015 - Amendment 1
$68.00 ISO 2928:2003 Rubber hoses and hose assemblies for liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas up to 25 bar (2,5 MPa) -- Specification
$103.00 ISO 2929:2014 Rubber hoses and hose assemblies for bulk fuel delivery by truck - Specification
$103.00 ISO 3821:2008 Gas welding equipment - Rubber hoses for welding, cutting and allied processes
$45.00 ISO 3861:2005 Rubber hoses for sand and grit blasting - Specification
$103.00 ISO 3862:2009 Rubber hoses and hose assemblies - Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids - Specification
$103.00 ISO 3949:2009 Plastics hoses and hose assemblies - Textile-reinforced types for hydraulic applications - Specification
$103.00 ISO 3996:1995 Road vehicles - Brake hose assemblies for hydraulic braking systems used with non-petroleum-base brake fluid
$68.00 ISO 4038:1996 Road vehicles - Hydraulic braking systems - Simple flare pipes, tapped holes, male fittings and hose end fittings
$68.00 ISO 4079:2015 Rubber hoses and hose assemblies - Textile-reinforced hydraulic types for oil-based or water-based fluids - Specification
$103.00 ISO 4081:2016 Rubber hoses and tubing for cooling systems for internal-combustion engines - Specification
$123.00 ISO 4081:2010 Rubber hoses and tubing for cooling systems for internal-combustion engines - Specification
$103.00 ISO 4642-1:2015 Rubber and plastics hoses, non-collapsible, for fire-fighting service - Part 1: Semi-rigid hoses for fixed systems
$123.00 ISO 4642-1:2009 Rubber and plastics hoses, non-collapsible, for fire-fighting service - Part 1: Semi-rigid hoses for fixed systems
$173.00 ISO 4642-2:2009 Rubber and plastics hoses, non-collapsible, for fire-fighting service - Part 2: Semi-rigid hoses (and hose assemblies) for pumps and vehicles
$68.00 ISO 4671:2007 Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies
$19.00 ISO 4671/Amd1:2011 Rubber and plastics hose and hose assemblies - Methods of measurement of dimensions - Amendment 1: Clarification of position at which outside diameter is measured
$138.00 ISO 5359:2014 Anaesthetic and respiratory equipment - Low-pressure hose assemblies for use with medical gases
$156.00 ISO 5359:2008 Low-pressure hose assemblies for use with medical gases
$22.00 ISO 5359/Amd1:2011 Low-pressure flexible connecting assemblies (hose assemblies) for use with medical gas systems - Amendment 1
$103.00 ISO 5771:2008 Rubber hoses and hose assemblies for transferring anhydrous ammonia - Specification
$138.00 ISO 5772:2015 Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems - Specification
$88.00 ISO 5772:1998 Rubber hoses and hose assemblies for measured fuel dispensing - Specification
$103.00 ISO 6120:1995 Road vehicles - Brake hose assemblies for hydraulic braking systems used with petroleum-base brake fluid
$68.00 ISO 6605:2002 Hydraulic fluid power - Hoses and hose assemblies - Test methods
$45.00 ISO 6772:2012 Aerospace - Fluid systems - Impulse testing of hydraulic hose, tubing and fitting assemblies
$173.00 ISO 6772:1988 Aerospace - Fluid systems - Impulse testing of hydraulic hose, tubing and fitting assemblies
$103.00 ISO 6804:2016 Rubber and plastics inlet hoses and hose assemblies for washing-machines and dishwashers - Specification
$123.00 ISO 6804:2009 Rubber and plastics inlet hoses and hose assemblies for washing-machines and dishwashers - Specification
$123.00 ISO 6804:2009 Rubber and plastics inlet hoses and hose assemblies for washing-machines and dishwashers - Specification
$68.00 ISO 6805:1994 Rubber hoses and hose assemblies for underground mining - Wire-reinforced hydraulic types for coal mining - Specification
$68.00 ISO 6806:2014 Rubber hoses and hose assemblies for use in oil burners - Specification
$77.00 ISO 6806:1992 Rubber hoses and hose assemblies for use in oil burners - Specification
$68.00 ISO 6807:2003 Rubber hoses and hose assemblies for rotary drilling and vibration applications - Specification
$103.00 ISO 6808:2014 Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids - Specification
$99.00 ISO 6808:1999 Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids - Specification
$45.00 ISO 7258:1984 Polytetrafluoroethylene (PTFE) tubing for aerospace applications - Methods for the determination of the density and relative density
$68.00 ISO 7313:1984 Aircraft - High temperature convoluted hose assemblies in polytetrafluoroethylene (PTFE)
$45.00 ISO 8028:1999 Rubber and/or plastics hoses and hose assemblies for airless paint spraying -- Specification
$138.00 ISO 8066-2:2001 Rubber and plastics hoses and hose assemblies for automotive air conditioning - Specification - Part 2: Refrigerant 134a
$45.00 ISO 8207:1996 Gas welding equipment - Specification for hose assemblies for equipment for welding, cutting and allied processes
$68.00 ISO 8789:2009 Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles - Specification
$173.00 ISO 8829:1990 Aerospace - Polytetrafluoroethylene (PTFE) hose assemblies - Test methods
$138.00 ISO 8829-1:2009 Aerospace - Test methods for polytetrafluoroethylene (PTFE) inner-tube hose assemblies - Part 1: Metallic (stainless steel) braid
$138.00 ISO 8829-2:2006 Aerospace - Test methods for polytetrafluoroethylene (PTFE) inner-tube hose assemblies - Part 2: Non-metallic braid
$162.00 ISO 8913:2006 Aerospace - Lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 400 degrees F/3 000 psi (204 degrees C/20 684 kPa) and 204 degrees C/21 000 kPa (400 degrees F/3 046 psi) - Procurement specification
$173.00 ISO 8913:1994 Aerospace - Lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 204 degrees C/21 000 kPa - Procurement specification
$103.00 ISO 9528:1994 Aerospace - Standard-weight polytetrafluoroethylene (PTFE) hose assemblies, classification 204 degrees C/21 000 kPa - Procurement specification
$103.00 ISO 9938:1994 Aerospace - Polytetrafluoroethylene (PTFE) hose assemblies, classification 204 degrees C/28 000 kPa - Procurement specification
$87.00 JIS D 2602:2008 Rubber hoses and tubing for cooling systems for internal-combustion engines -- Specification
$49.00 JIS K 6330-7:2011 Rubber and plastics hoses -- Part 7: Assessment of ozone resistance under static conditions
$103.00 ISO 4079:2017 Rubber hoses and hose assemblies - Textile-reinforced hydraulic types for oil-based or water-based fluids - Specification
$103.00 ISO 6806:2017 Rubber hoses and hose assemblies for use in oil burners - Specification
$103.00 ISO 1436:2017 Rubber hoses and hose assemblies - Wire-braid-reinforced hydraulic types for oil-based or water-based fluids - Specification
$103.00 ISO 3862:2017 Rubber hoses and hose assemblies - Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids - Specification
$19.00 ISO 5359:2014/Amd1:2017 - Amendment 1
$68.00 ISO 6605:2017 Hydraulic fluid power - Test methods for hoses and hose assemblies
$68.00 ISO 11237:2017 Rubber hoses and hose assemblies - Compact wire-braid-reinforced hydraulic types for oil-based or water-based fluids - Specification
$103.00 ISO 16301:2017 Rubber and plastics hoses and hose assemblies, wire- or textile-reinforced, for manually operated hydraulic jacks - Specification