ISO 19403-1:2017 - $68.00   BUY NOW

Paints and varnishes - Wettability - Part 1: Terminology and general principles

ISO 19403-1:2017 Publication Description:

The ISO 19403 series specifies optical test methods

- for the measurement of the contact angle,

- for the determination of the free surface energy of a solid surface, including the polar and dispersive fractions,

- for the determination of the surface tension of liquids, including the polar and dispersive fractions, and

- for the checking of the measurement arrangement with reference materials.

It can be applied for the characterization of substrates, coatings and coating materials.

The applicability can be restricted for liquids with non-Newtonian rheology[1].

ISO 19403-1:2017 specifies terms and definitions and defines the general principles.

[1] This term is defined in DIN 1342-1.

International Classification for Standards (ICS)

ICS Classification Field ICS Field Sub-Group and Number
ICS-01-Generalities ICS Vocabularies-Paint/Colour (01.040.87)
ICS-87-Paint ICS Paints/Varnishes (87.040)

ICS Related Standards

Cart Document Number Document Title
$138.00 ISO 18451-1:2015 Pigments, dyestuffs and extenders - Terminology - Part 1: General terms
$45.00 ISO 4618:2014 Paints and varnishes - Terms and definitions
$224.00 ISO 4618:2006 Paints and varnishes - Terms and definitions
$103.00 ISO 19403-2:2017 Paints and varnishes - Wettability - Part 2: Determination of the surface free energy of solid surfaces by measuring the contact angle
$68.00 ISO 19403-3:2017 Paints and varnishes - Wettability - Part 3: Determination of the surface tension of liquids using the pendant drop method
$68.00 ISO 19403-4:2017 Paints and varnishes - Wettability - Part 4: Determination of the polar and dispersive fractions of the surface tension of liquids from an interfacial tension
$45.00 ISO 19403-5:2017 Paints and varnishes - Wettability - Part 5: Determination of the polar and dispersive fractions of the surface tension of liquids from contact angles measurements on a solid with only a disperse contribution to its surface energy
$68.00 ISO 19403-6:2017 Paints and varnishes - Wettability - Part 6: Measurement of dynamic contact angle
$103.00 ISO 19403-7:2017 Paints and varnishes - Wettability - Part 7: Measurement of the contact angle on a tilt stage (roll-off angle)
$68.00 ISO 10890:2010 Paints and varnishes - Modelling of biocide release rate from antifouling paints by mass-balance calculation
$68.00 ISO 11503:1995 Paints and varnishes - Determination of resistance to humidity (intermittent condensation)
$68.00 ISO 11890-1:2007 Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 1: Difference method
$103.00 ISO 11890-2:2013 Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 2: Gas-chromatographic method
$103.00 ISO 11997-1:2005 Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 1: Wet (salt fog)/dry/humidity
$68.00 ISO 11997-2:2013 Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 2: Wet (salt fog)/dry/humidity/UV light
$68.00 ISO 11998:2006 Paints and varnishes - Determination of wet-scrub resistance and cleanability of coatings
$68.00 ISO 12013-1:2012 Paints and varnishes - Determination of curing characteristics using a free damped oscillation method - Part 1: Start temperature of the curing reaction
$68.00 ISO 12013-2:2012 Paints and varnishes - Determination of curing characteristics using a free damped oscillation method - Part 2: Glass transition temperature
$68.00 ISO 12137:2011 Paints and varnishes - Determination of mar resistance
$45.00 ISO 13076:2012 Paints and varnishes - Lighting and procedure for visual assessments of coatings
$103.00 ISO 13129:2012 Paints and varnishes - Electrochemical measurement of the protection provided to steel by paint coatings - Current interrupter (CI) technique, relaxation voltammetry (RV) technique and DC transient (DCT) measurements
$68.00 ISO 13803:2014 Paints and varnishes - Determination of haze on paint films at 20 degrees
$88.00 ISO 13803:2000 Paints and varnishes -- Determination of reflection haze on paint films at 20 degrees
$68.00 ISO 15091:2012 Paints and varnishes - Determination of electrical conductivity and resistance
$103.00 ISO 15110:2013 Paints and varnishes - Artificial weathering including acidic deposition
$45.00 ISO 1513:2010 Paints and varnishes - Examination and preparation of test samples
$68.00 ISO 1514:2016 Paints and varnishes - Standard panels for testing
$123.00 ISO 1514:2004 Paints and varnishes - Standard panels for testing
$68.00 ISO 1516:2002 Determination of flash/no flash - Closed cup equilibrium method
$68.00 ISO 1518-1:2011 Paints and varnishes - Determination of scratch resistance - Part 1: Constant-loading method
$68.00 ISO 15181-1:2007 Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 1: General method for extraction of biocides
$68.00 ISO 15181-2:2007 Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 2: Determination of copper-ion concentration in the extract and calculation of the release rate
$68.00 ISO 15181-3:2007 Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 3: Calculation of the zinc ethylene-bis(dithiocarbamate) (zineb) release rate by determination of the concentration of ethylenethiourea in the extract
$68.00 ISO 15181-4:2008 Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 4: Determination of pyridine-triphenylborane (PTPB) concentration in the extract and calculation of the release rate
$103.00 ISO 15181-5:2008 Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 5: Calculation of the tolylfluanid and dichlofluanid release rate by determination of the concentration of dimethyltolylsulfamide (DMST) and dimethylphenylsulfamide (DMSA) in the extract
$103.00 ISO 15181-6:2012 Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 6: Determination of tralopyril release rate by quantitation of its degradation product in the extract
$68.00 ISO 1518-2:2011 Paints and varnishes - Determination of scratch resistance - Part 2: Variable-loading method
$68.00 ISO 15184:2012 Paints and varnishes - Determination of film hardness by pencil test
$68.00 ISO 1519:2011 Paints and varnishes - Bend test (cylindrical mandrel)
$45.00 ISO 1520:2006 Paints and varnishes - Cupping test
$68.00 ISO 1522:2006 Paints and varnishes - Pendulum damping test
$68.00 ISO 1523:2002 Determination of flash point - Closed cup equilibrium method
$68.00 ISO 15234:1999 Paints and varnishes - Testing of formaldehyde-emitting coatings and melamine foams - Determination of the steady-state concentration of formaldehyde in a small test chamber
$45.00 ISO 1524:2013 Paints, varnishes and printing inks - Determination of fineness of grind
$68.00 ISO 15528:2013 Paints, varnishes and raw materials for paints and varnishes - Sampling
$45.00 ISO 15710:2002 Paints and varnishes - Corrosion testing by alternate immersion in and removal from a buffered sodium chloride solution
$103.00 ISO 15711:2003 Paints and varnishes - Determination of resistance to cathodic disbonding of coatings exposed to sea water
$138.00 ISO 16053:2010 Paints and varnishes - Coating materials and coating systems for exterior wood - Natural weathering test
$138.00 ISO 16474-1:2013 Paints and varnishes - Methods of exposure to laboratory light sources - Part 1: General guidance
$103.00 ISO 16474-2:2013 Paints and varnishes - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps
$103.00 ISO 16474-3:2013 Paints and varnishes - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps
$68.00 ISO 16474-4:2013 Paints and varnishes - Methods of exposure to laboratory light sources - Part 4: Open-flame carbon-arc lamps
$45.00 ISO 16482-1:2013 Binders for paints and varnishes - Determination of the non-volatile-matter content of aqueous rosin-resin dispersions - Part 1: Oven method
$45.00 ISO 16482-2:2013 Binders for paints and varnishes - Determination of the non-volatile-matter content of aqueous rosin-resin dispersions - Part 2: Microwave method
$45.00 ISO 16773-1:2016 Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens - Part 1: Terms and definitions
$51.00 ISO 16773-1:2007 Paints and varnishes - Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens - Part 1: Terms and definitions
$138.00 ISO 16773-2:2016 Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens - Part 2: Collection of data
$123.00 ISO 16773-2:2007 Paints and varnishes - Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens - Part 2: Collection of data
$68.00 ISO 16773-3:2016 Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens - Part 3: Processing and analysis of data from dummy cells
$88.00 ISO 16773-3:2009 Paints and varnishes - Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens - Part 3: Processing and analysis of data from dummy cells
$103.00 ISO 16773-4:2009 Paints and varnishes - Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens - Part 4: Examples of spectra of polymer-coated specimens
$45.00 ISO 16805:2003 Binders for paints and varnishes - Determination of glass transition temperature
$68.00 ISO 16862:2003 Paints and varnishes - Evaluation of sag resistance
$103.00 ISO 16925:2014 Paints and varnishes - Determination of the resistance of coatings to pressure water-jetting
$45.00 ISO 16927:2014 Paints and varnishes - Determination of the overcoatability and recoatability of a coating
$68.00 ISO 17132:2007 Paints and varnishes - T-bend test
$103.00 ISO 17463:2014 Paints and varnishes - Guidelines for the determination of anticorrosive properties of organic coatings by accelerated cyclic electrochemical technique
$68.00 ISO 17872:2007 Paints and varnishes - Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing
$68.00 ISO 17895:2005 Paints and varnishes - Determination of the volatile organic compound content of low-VOC emulsion paints (in-can VOC)
$68.00 ISO 19334:2010 Binders for paints and varnishes - Gum rosin - Gas-chromatographic analysis
$103.00 ISO/TS 19397:2015 Determination of the film thickness of coatings using an ultrasonic gage
$162.00 ISO 19399:2016 Paints and varnishes - Wedge-cut method for determination of film thickness (scribe and drill method)
$138.00 ISO 20340:2009 Paints and varnishes - Performance requirements for protective paint systems for offshore and related structures
$68.00 ISO 20566:2013 Paints and varnishes - Determination of the scratch resistance of a coating system using a laboratory-scale car-wash
$68.00 ISO 20567-1:2017 Paints and varnishes - Determination of stone-chip resistance of coatings - Part 1: Multi-impact testing
$88.00 ISO 20567-1:2005 Paints and varnishes - Determination of stone-chip resistance of coatings - Part 1: Multi-impact testing
$68.00 ISO 20567-2:2017 Paints and varnishes - Determination of stone-chip resistance of coatings - Part 2: Single-impact test with a guided impact body
$88.00 ISO 20567-2:2005 Paints and varnishes - Determination of stone-chip resistance of coatings - Part 2: Single-impact test with a guided impact body
$68.00 ISO 20567-3:2012 Paints and varnishes - Determination of stone-chip resistance of coatings - Part 3: Single-impact test with a free-flying impact body
$68.00 ISO 21227-1:2003 Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 1: General guidance
$68.00 ISO 21227-2:2006 Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 2: Evaluation procedure for multi-impact stone-chipping test
$68.00 ISO 21227-3:2007 Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 3: Evaluation of delamination and corrosion around a scribe
$68.00 ISO 21227-4:2008 Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 4: Evaluation of filiform corrosion
$88.00 ISO 23811:2009 Paints and varnishes - Determination of percentage volume of non-volatile matter by measuring the non-volatile matter content and the density of the coating material, and calculation of the theoretical spreading rate
$103.00 ISO 2409:2013 Paints and varnishes - Cross-cut test
$103.00 ISO 2431:2011 Paints and varnishes - Determination of flow time by use of flow cups
$185.00 ISO 2808:2007 Paints and varnishes - Determination of film thickness
$68.00 ISO 2810:2004 Paints and varnishes - Natural weathering of coatings - Exposure and assessment
$68.00 ISO 2811-1:2016 Paints and varnishes - Determination of density - Part 1: Pycnometer method
$88.00 ISO 2811-1:2011 Paints and varnishes - Determination of density - Part 1: Pyknometer method
$68.00 ISO 2811-2:2011 Paints and varnishes - Determination of density - Part 2: Immersed body (plummet) method
$68.00 ISO 2811-3:2011 Paints and varnishes - Determination of density - Part 3: Oscillation method
$68.00 ISO 2811-4:2011 Paints and varnishes - Determination of density - Part 4: Pressure cup method
$68.00 ISO 2812-1:2007 Paints and varnishes - Determination of resistance to liquids - Part 1: Immersion in liquids other than water
$45.00 ISO 2812-2:2007 Paints and varnishes - Determination of resistance to liquids - Part 2: Water immersion method
$68.00 ISO 2812-3:2012 Paints and varnishes - Determination of resistance to liquids - Part 3: Method using an absorbent medium
$68.00 ISO 2812-4:2007 Paints and varnishes - Determination of resistance to liquids - Part 4: Spotting methods
$45.00 ISO 2812-5:2007 Paints and varnishes - Determination of resistance to liquids - Part 5: Temperature-gradient oven method
$138.00 ISO 2813:2014 Paints and varnishes - Determination of gloss value at 20 degrees, 60 degrees and 85 degrees
$77.00 ISO 2813:1994 Paints and varnishes - Determination of specular gloss of non-metallic paint films at 20 degrees, 60 degrees and 85 degrees
$68.00 ISO 2815:2003 Paints and varnishes - Buchholz indentation test
$138.00 ISO 28199-1:2009 Paints and varnishes - Evaluation of properties of coating systems related to the application process - Part 1: Relevant vocabulary and preparation of test panels
$68.00 ISO 28199-2:2009 Paints and varnishes - Evaluation of properties of coating systems related to the application process - Part 2: Colour stability, process hiding power, re-dissolving, overspray absorption, wetting, surface texture and mottling
$68.00 ISO 28199-3:2009 Paints and varnishes - Evaluation of properties of coating systems related to the application process - Part 3: Visual assessment of sagging, formation of bubbles, pinholing and hiding power
$45.00 ISO 2884-1:1999 Paints and varnishes -- Determination of viscosity using rotary viscometers -- Part 1: Cone-and-plate viscometer operated at a high rate of shear
$68.00 ISO 2884-2:2003 Paints and varnishes - Determination of viscosity using rotary viscometers - Part 2: Disc or ball viscometer operated at a specified speed
$45.00 ISO 3231:1993 Paints and varnishes - Determination of resistance to humid atmospheres containing sulfur dioxide
$68.00 ISO 3233-1:2013 Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 1: Method using a coated test panel to determine non-volatile matter and to determine dry film density by the Archimedes principle
$68.00 ISO 3233-2:2014 Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 2: Method using the determination of non-volatile-matter content in accordance with ISO 3251 and determination of dry film density on coated test panels by the Archimedes principle
$103.00 ISO 3233-3:2015 Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 3: Determination by calculation from the non-volatile-matter content determined in accordance with ISO 3251, the density of the coating material and the density of the solvent in the coating material
$45.00 ISO 3248:2016 Paints and varnishes - Determination of the effect of heat
$51.00 ISO 3248:1998 Paints and varnishes - Determination of the effect of heat
$68.00 ISO 3251:2008 Paints, varnishes and plastics - Determination of non-volatile-matter content
$45.00 ISO 3270:1984 Paints and varnishes and their raw materials - Temperatures and humidities for conditioning and testing
$68.00 ISO 3668:1998 Paints and varnishes - Visual comparison of the colour of paints
$138.00 ISO 3679:2015 Determination of flash no-flash and flash point - Rapid equilibrium closed cup method
$123.00 ISO 3679:2004 Determination of flash point - Rapid equilibrium closed cup method
$45.00 ISO 3856-1:1984 Paints and varnishes - Determination of soluble metal content - Part 1: Determination of lead content - Flame atomic absorption spectrometric method and dithizone spectrophotometric method
$45.00 ISO 3856-2:1984 Paints and varnishes - Determination of soluble metal content - Part 2: Determination of antimony content - Flame atomic absorption spectrometric method and Rhodamine B spectrophotometric method
$45.00 ISO 3856-3:1984 Paints and varnishes - Determination of soluble metal content - Part 3: Determination of barium content - Flame atomic emission spectrometric method
$45.00 ISO 3856-4:1984 Paints and varnishes - Determination of soluble metal content - Part 4: Determination of cadmium content - Flame atomic absorption spectrometric method and polarographic method
$45.00 ISO 3856-5:1984 Paints and varnishes - Determination of soluble metal content - Part 5 : Determination of hexavalent chromium content of the pigment portion of the liquid paint or the paint in powder form - Diphenylcarbazide spectrophotometric method
$45.00 ISO 3856-6:1984 Paints and varnishes - Determination of soluble metal content - Part 6 : Determination of total chromium content of the liquid portion of the paint - Flame atomic absorption spectrometric method
$68.00 ISO 3856-7:1984 Paints and varnishes - Determination of soluble metal content - Part 7 : Determination of mercury content of the pigment portion of the paint and of the liquid portion of water-dilutable paints - Flameless atomic absorption spectrometric method
$45.00 ISO 4618:2014 Paints and varnishes - Terms and definitions
$224.00 ISO 4618:2006 Paints and varnishes - Terms and definitions
$68.00 ISO 4623-1:2000 Paints and varnishes -- Determination of resistance to filiform corrosion -- Part 1: Steel substrates
$68.00 ISO 4623-2:2016 Paints and varnishes - Determination of resistance to filiform corrosion - Part 2: Aluminium substrates
$51.00 ISO 4623-2:2003 Paints and varnishes - Determination of resistance to filiform corrosion - Part 2: Aluminium substrates
$68.00 ISO 4624:2016 Paints and varnishes - Pull-off test for adhesion
$88.00 ISO 4624:2002 Paints and varnishes - Pull-off test for adhesion
$45.00 ISO 4628-1:2016 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 1: General introduction and designation system
$51.00 ISO 4628-1:2003 Paints and varnishes -- Evaluation of degradation of coatings -- Designation of quantity and size of defects, and of intensity of uniform changes in appearance -- Part 1: General introduction and designation system
$68.00 ISO 4628-10:2016 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 10: Assessment of degree of filiform corrosion
$51.00 ISO 4628-10:2003 Paints and varnishes -- Evaluation of degradation of coatings -- Designation of quantity and size of defects, and of intensity of uniform changes in appearance -- Part 10: Assessment of degree of filiform corrosion
$103.00 ISO 4628-2:2016 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering
$88.00 ISO 4628-2:2003 Paints and varnishes -- Evaluation of degradation of coatings -- Designation of quantity and size of defects, and of intensity of uniform changes in appearance -- Part 2: Assessment of degree of blistering
$103.00 ISO 4628-3:2016 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting
$123.00 ISO 4628-3:2003 Paints and varnishes -- Evaluation of degradation of coatings -- Designation of quantity and size of defects, and of intensity of uniform changes in appearance -- Part 3: Assessment of degree of rusting
$103.00 ISO 4628-4:2016 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking
$123.00 ISO 4628-4:2003 Paints and varnishes -- Evaluation of degradation of coatings -- Designation of quantity and size of defects, and of intensity of uniform changes in appearance -- Part 4: Assessment of degree of cracking
$45.00 ISO 4628-5:2016 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking
$51.00 ISO 4628-5:2003 Paints and varnishes -- Evaluation of degradation of coatings -- Designation of quantity and size of defects, and of intensity of uniform changes in appearance -- Part 5: Assessment of degree of flaking
$45.00 ISO 4628-6:2011 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 6: Assessment of degree of chalking by tape method
$45.00 ISO 4628-7:2016 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 7: Assessment of degree of chalking by velvet method
$51.00 ISO 4628-7:2003 Paints and varnishes -- Evaluation of degradation of coatings -- Designation of quantity and size of defects, and of intensity of uniform changes in appearance -- Part 7: Assessment of degree of chalking by velvet method
$68.00 ISO 4628-8:2012 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 8: Assessment of degree of delamination and corrosion around a scribe or other artificial defect
$45.00 ISO 6270-1:1998 Paints and varnishes - Determination of resistance to humidity - Part 1: Continuous condensation
$45.00 ISO 6270-2:2005 Paints and varnishes - Determination of resistance to humidity - Part 2: Procedure for exposing test specimens in condensation-water atmospheres
$68.00 ISO 6272-1:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter
$45.00 ISO 6272-2:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter
$45.00 ISO 6503:1984 Paints and varnishes - Determination of total lead - Flame atomic absorption spectrometric method
$162.00 ISO 6504-1:1983 Paints and varnishes - Determination of hiding power - Part 1 : Kubelka-Munk method for white and light-coloured paints
$68.00 ISO 6504-3:2006 Paints and varnishes - Determination of hiding power - Part 3: Determination of contrast ratio of light-coloured paints at a fixed spreading rate
$45.00 ISO 6713:1984 Paints and varnishes - Preparation of acid extracts from paints in liquid or powder form
$45.00 ISO 6860:2006 Paints and varnishes - Bend test (conical mandrel)
$45.00 ISO 7252:1984 Paints and varnishes - Determination of total mercury - Flameless atomic absorption spectrometric method
$103.00 ISO 7783:2011 Paints and varnishes - Determination of water-vapour transmission properties - Cup method
$68.00 ISO 7784-1:2016 Paints and varnishes - Determination of resistance to abrasion - Part 1: Method with abrasive-paper covered wheels and rotating test specimen
$88.00 ISO 7784-1:1997 Paints and varnishes - Determination of resistance to abrasion - Part 1: Rotating abrasive-paper-covered wheel method
$68.00 ISO 7784-2:2016 Paints and varnishes - Determination of resistance to abrasion - Part 2: Method with abrasive rubber wheels and rotating test specimen
$88.00 ISO 7784-2:1997 Paints and varnishes - Determination of resistance to abrasion - Part 2: Rotating abrasive rubber wheel method
$68.00 ISO 7784-3:2016 Paints and varnishes - Determination of resistance to abrasion - Part 3: Method with abrasive-paper covered wheel and linearly reciprocating test specimen
$88.00 ISO 7784-3:2000 Paints and varnishes - Determination of resistance to abrasion - Part 3: Reciprocating test panel method
$45.00 ISO 8130-1:1992 Coating powders - Part 1: Determination of particle size distribution by sieving
$45.00 ISO 8130-10:1998 Coating powders - Part 10: Determination of deposition efficiency
$45.00 ISO 8130-11:1997 Coating powders - Part 11: Inclined-plane flow test
$45.00 ISO 8130-12:1998 Coating powders - Part 12: Determination of compatibility
$45.00 ISO 8130-13:2001 Coating powders - Part 13: Particle size analysis by laser diffraction
$45.00 ISO 8130-14:2004 Coating powders - Part 14: Terminology
$45.00 ISO 8130-2:1992 Coating powders - Part 2: Determination of density by gas comparison pyknometer (referee method)
$45.00 ISO 8130-3:1992 Coating powders - Part 3: Determination of density by liquid displacement pyknometer
$45.00 ISO 8130-4:1992 Coating powders - Part 4: Calculation of lower explosion limit
$45.00 ISO 8130-5:1992 Coating powders - Part 5: Determination of flow properties of a powder/air mixture
$45.00 ISO 8130-6:1992 Coating powders - Part 6: Determination of gel time of thermosetting coating powders at a given temperature
$19.00 ISO 8130-6/AMD1:1998 Amendment 1 to ISO 8130-6:1992
$45.00 ISO 8130-7:1992 Coating powders - Part 7: Determination of loss of mass on stoving
$45.00 ISO 8130-8:1994 Coating powders - Part 8: Assessment of the storage stability of thermosetting powders
$45.00 ISO 8130-9:1992 Coating powders - Part 9: Sampling
$68.00 ISO 9117-1:2009 Paints and varnishes - Drying tests - Part 1: Determination of through-dry state and through-dry time
$45.00 ISO 9117-2:2010 Paints and varnishes - Drying tests - Part 2: Pressure test for stackability
$45.00 ISO 9117-3:2010 Paints and varnishes - Drying tests - Part 3: Surface-drying test using ballotini
$45.00 ISO 9117-4:2012 Paints and varnishes - Drying tests - Part 4: Test using a mechanical recorder
$45.00 ISO 9117-5:2012 Paints and varnishes - Drying tests - Part 5: Modified Bandow-Wolff test
$45.00 ISO 9117-6:2012 Paints and varnishes - Drying tests - Part 6: Print-free test
$68.00 ISO 9514:2005 Paints and varnishes - Determination of the pot life of multicomponent coating systems - Preparation and conditioning of samples and guidelines for testing
$58.00 JIS K 5516:2003 Ready mixed paints (Synthetic resin type)
$49.00 JIS K 5531:2003 Nitrocellulose lacquer
$39.00 JIS K 5600-1-2:2002 Testing methods for paints -- Part 1: General rules -- Section 2: Sampling
$68.00 JIS K 5600-7-6:2002 Testing methods for paints -- Part 7: Long-period performance of film -- Section 6: Natural weathering
$78.00 JIS K 5660:2008 Glossy synthetic resin emulsion paint
$49.00 JIS K 6828-1:2003 Plastics -- Polymer dispersions -- Determination of non-volatile matter (residue) at specified temperatures
$29.00 JIS K 6828-2:2003 Plastics -- Polymer dispersions -- Determination of white point temperature and minimum film-forming temperature
$39.00 JIS K 6828-3:2003 Plastics -- Polymer dispersions -- Determination of sieve residue (gross particle and coagulum content)
$103.00 ISO 11997-1:2017 Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 1: Wet (salt fog)/dry/humid
$103.00 ISO 15110:2017 Paints and varnishes - Artificial weathering including acidic deposition
$185.00 ISO 16773-4:2017 Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens - Part 4: Examples of spectra of polymer-coated and uncoated specimens
$103.00 ISO 19396-1:2017 Paints and varnishes - Determination of pH value - Part 1: pH electrodes with glass membrane
$103.00 ISO 19396-2:2017 Paints and varnishes - Determination of pH value - Part 2: pH electrodes with ISFET technology
$68.00 ISO 3668:2017 Paints and varnishes - Visual comparison of colour of paints