ISO 17885:2015 - $185.00   BUY NOW

Plastics piping systems - Mechanical fittings for pressure piping systems - Specifications

ISO 17885:2015 Publication Description:

ISO 17885:2015 specifies the requirements and test methods for mechanical fittings intended to join plastic pressure piping systems including transition fittings to metal pipes for the following:

? supply of gaseous fuels (GAS);

? supply of water for human consumption (W), including raw water prior to treatment and for the supply of water for general purpose, as well as underground drainage and sewerage under pressure (P);

? supply of water for irrigation (I);

? industrial applications (IS).

ISO 17885:2015 is applicable only to mechanical fittings with operating-temperature and pressure limits as indicated in the relevant systems standards.

International Classification for Standards (ICS)

ICS Classification Field ICS Field Sub-Group and Number
ICS-23-Fluid ICS Plastics Fittings (23.040.45)
ICS-75-Petroleum ICS Petroleum Industry Handling Equipment (75.200)

ICS Related Standards

Cart Document Number Document Title
$45.00 ISO 10147:2011 Pipes and fittings made of crosslinked polyethylene (PE-X) - Estimation of the degree of crosslinking by determination of the gel content
$185.00 ISO/TR 10358:1993 Plastics pipes and fittings -- Combined chemical-resistance classification table
$68.00 ISO 10508:2006 Plastics piping systems for hot and cold water installations - Guidance for classification and design
$185.00 ISO 10928:2016 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Methods for regression analysis and their use
$240.00 ISO 10928:2009 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Methods for regression analysis and their use
$22.00 ISO 10928:2009/Amd1:2013 - Amendment 1
$68.00 ISO 10952:2014 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Determination of the resistance to chemical attack for the inside of a section in a deflected condition
$103.00 ISO 11296-1:2009 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 1: General
$138.00 ISO 11296-3:2009 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 3: Lining with close-fit pipes
$162.00 ISO 11296-4:2009 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes
$103.00 ISO 11296-7:2011 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 7: Lining with spirally-wound pipes
$103.00 ISO 11297-1:2013 Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 1: General
$103.00 ISO 11297-3:2013 Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 3: Lining with close-fit pipes
$103.00 ISO 11298-1:2010 Plastics piping systems for renovation of underground water supply networks - Part 1: General
$103.00 ISO 11298-3:2010 Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close-fit pipes
$103.00 ISO 11299-1:2011 Plastics piping systems for renovation of underground gas supply networks - Part 1: General
$103.00 ISO 11299-3:2011 Plastics piping systems for renovation of underground gas supply networks - Part 3: Lining with close-fit pipes
$68.00 ISO 1167-1:2006 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 1: General method
$45.00 ISO 1167-2:2006 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 2: Preparation of pipe test pieces
$68.00 ISO 1167-3:2007 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 3: Preparation of components
$45.00 ISO 1167-4:2007 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 4: Preparation of assemblies
$68.00 ISO 12162:2009 Thermoplastics materials for pipes and fittings for pressure applications - Classification, designation and design coefficient
$138.00 ISO 12176-1:2012 Plastics pipes and fittings - Equipment for fusion jointing polyethylene systems - Part 1: Butt fusion
$138.00 ISO 12176-2:2008 Plastics pipes and fittings - Equipment for fusion jointing polyethylene systems - Part 2: Electrofusion
$68.00 ISO 12176-3:2011 Plastics pipes and fittings - Equipment for fusion jointing polyethylene systems - Part 3: Operators badge
$138.00 ISO 12176-4:2003 Plastics pipes and fittings - Equipment for fusion jointing polyethylene systems - Part 4: Traceability coding
$68.00 ISO 13260:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading
$45.00 ISO 13262:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam
$45.00 ISO 13263:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for impact strength
$45.00 ISO 13264:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for mechanical strength or flexibility of fabricated fittings
$103.00 ISO 13265:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Joints for buried non-pressure applications - Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure
$45.00 ISO 13266:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of resistance against surface and traffic loading
$68.00 ISO 13267:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics inspection chamber and manhole bases - Test methods for buckling resistance
$68.00 ISO 13268:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of ring stiffness
$138.00 ISO 13272:2011 Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP), polypropylene with mineral modifiers (PP-MD) and polyethylene (PE) - Specifications for manholes and inspection chambers in traffic areas and underground installations
$45.00 ISO 13761:1996 Plastics pipes and fittings -- Pressure reduction factors for polyethylene pipeline systems for use at temperatures above 20 degrees C
$45.00 ISO 13924:2000 Plastics pipes and fittings - Bending-tensile cycle test for PE/metal transition fittings, PE tapping tees and PE branch saddles
$209.00 ISO 13950:2007 Plastics pipes and fittings - Automatic recognition systems for electrofusion joints
$45.00 ISO 13957:1997 Plastics pipes and fittings -- Polyethylene (PE) tapping tees -- Test method for impact resistance
$45.00 ISO 13966:1998 Thermoplastics pipes and fittings -- Nominal ring stiffnesses
$103.00 ISO 13967:2009 Thermoplastics fittings - Determination of ring stiffness
$68.00 ISO 1452-1:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: General
$138.00 ISO 1452-2:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Pipes
$185.00 ISO 1452-3:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 3: Fittings
$68.00 ISO 1452-4:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 4: Valves
$103.00 ISO 1452-5:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 5: Fitness for purpose of the system
$138.00 ISO 14531-1:2002 Plastics pipes and fittings - Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels - Metric series Specifications - Part 1: Pipes
$162.00 ISO 14531-2:2004 Plastics pipes and fittings - Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels - Metric series - Specifications - Part 2: Fittings for heat-fusion jointing
$138.00 ISO 14531-3:2010 Plastics pipes and fittings - Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels - Metric series - Specifications - Part 3: Fittings for mechanical jointing (including PE-X/metal transitions)
$103.00 ISO 14531-4:2006 Plastics pipes and fittings - Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels - Metric series - Specifications - Part 4: System design and installation guidelines
$45.00 ISO 15306:2003 Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the resistance to cyclic internal pressure
$19.00 ISO 15306/Amd1:2012 Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the resistance to cyclic internal pressure - Amendment 1
$103.00 ISO 15874-3:2013 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings
$68.00 ISO 15875-3:2003 Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings
$103.00 ISO 15876-3:2017 Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings
$88.00 ISO 15876-3:2003 Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 3: Fittings
$138.00 ISO 15877-3:2009 Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings
$19.00 ISO 15877-3/Amd1:2010 Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings - Amendment 1
$103.00 ISO 16241:2005 Notch tensile test to measure the resistance to slow crack growth of polyethylene materials for pipe and fitting products (PENT)
$138.00 ISO 16422:2014 Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure - Specifications
$68.00 ISO 16871:2003 Plastics piping and ducting systems - Plastics pipes and fittings - Method for exposure to direct (natural) weathering
$45.00 ISO/TR 16913:1999 Plastics pipes and fittings -- Definitions of types of test
$138.00 ISO 17467-1:2012 Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems jointed by solvent cement - Part 1: General
$68.00 ISO 17467-2:2012 Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems jointed by solvent cement - Part 2: Pipes
$45.00 ISO 17467-3:2012 Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems jointed by solvent cement - Part 3: Fittings
$162.00 ISO 17484-1:2014 Plastics piping systems - Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) - Part 1: Specifications for systems
$68.00 ISO 17484-2:2009 Plastics piping systems - Multilayer pipe systems for indoor gas installations - Part 2: Code of pratice
$19.00 ISO 17885:2015/Amd1:2016 - Amendment 1
$103.00 ISO/TS 17902:2016 Wrapped electrofoaming joints for polyethylene (PE) piping systems with smooth outer wall for gravity drains and sewers
$103.00 ISO 18225:2012 Plastics piping systems - Multilayer piping systems for outdoor gas installations - Specifications for systems
$185.00 ISO/TS 18226:2006 Plastics pipes and fittings - Reinforced thermoplastics pipe systems for the supply of gaseous fuels for pressures up to 4 MPa (40 bar)
$68.00 ISO 18488:2015 Polyethylene (PE) materials for piping systems - Determination of Strain Hardening Modulus in relation to slow crack growth - Test method
$68.00 ISO 18489:2015 Polyethylene (PE) materials for piping systems - Determination of resistance to slow crack growth under cyclic loading - Cracked Round Bar test method
$68.00 ISO 18553:2002 Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds
$19.00 ISO 18553/Amd1:2007 Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds - Amendment 1
$209.00 ISO 18672-1:2009 Plastics piping systems for non-pressure drainage and sewerage - Polyester resin concrete (PRC) - Part 1: Pipes and fittings with flexible joints
$103.00 ISO/TR 19480:2005 Polyethylene pipes and fittings for the supply of gaseous fuels or water - Training and assessment of fusion operators
$68.00 ISO 19893:2011 Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling
$45.00 ISO/TS 19911:2010 Plastics pipes and fittings - Format of a technical file for characterizing PE spigot end fittings
$68.00 ISO 21003-3:2008 Multilayer piping systems for hot and cold water installations inside buildings - Part 3: Fittings
$138.00 ISO 21004:2006 Plastics piping systems - Multilayer pipes and their joints, based on thermoplastics, for water supply
$103.00 ISO 21138-1:2007 Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: Material specifications and performance criteria for pipes, fittings and system
$185.00 ISO 21138-2:2007 Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Pipes and fittings with smooth external surface, Type A
$185.00 ISO 21138-3:2007 Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 3: Pipes and fittings with non-smooth external surface, Type B
$68.00 ISO 21307:2011 Plastics pipes and fittings - Butt fusion jointing procedures for polyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems
$68.00 ISO 21751:2011 Plastics pipes and fittings - Decohesion test of electrofusion assemblies - Strip-bend test
$103.00 ISO 22391-3:2009 Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings
$45.00 ISO 2507-1:1995 Thermoplastics pipes and fittings -- Vicat softening temperature -- Part 1: General test method
$45.00 ISO 2507-2:1995 Thermoplastics pipes and fittings -- Vicat softening temperature -- Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly(vinyl chloride) (PVC-HI) pipes
$45.00 ISO 2507-3:1995 Thermoplastics pipes and fittings -- Vicat softening temperature -- Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings
$138.00 ISO 265-1:1988 Pipes and fittings of plastics materials - Fittings for domestic and industrial waste pipes - Basic dimensions : Metric series - Part 1: Unplasticized poly(vinyl chloride) (PVC-U)
$45.00 ISO/TS 26873:2010 Plastics pipes and fittings - Definition and construction procedures for reference lines
$45.00 ISO 3514:1976 Chlorinated polyvinyl chloride (CPVC) pipes and fittings -- Specification and determination of density
$45.00 ISO 3603:1977 Fittings for unplasticized polyvinyl chloride (PVC) pressure pipes with elastic sealing ring type joints -- Pressure test for leakproofness
$45.00 ISO 4132:1979 Unplasticized polyvinyl chloride (PVC) and metal adaptor fittings for pipes under pressure -- Laying lengths and size of threads -- Metric series
$103.00 ISO 4427-1:2007 Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - Part 1: General
$19.00 ISO 4427-1:2007/Amd1:2015 - Amendment 1: Melt mass-flow rate (MFR) for PE 80 and PE 100
$162.00 ISO 4427-3:2007 Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - Part 3: Fittings
$68.00 ISO 4427-5:2007 Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - Part 5: Fitness for purpose of the system
$45.00 ISO 4439:1979 Unplasticized polyvinyl chloride (PVC) pipes and fittings -- Determination and specification of density
$45.00 ISO 580:2005 Plastics piping and ducting systems - Injection-moulded thermoplastics fittings - Methods for visually assessing the effects of heating
$45.00 ISO 7245:1984 Pipes and fittings of acrylonitrile/butadiene/styrene (ABS) -- General specification for moulding and extrusion materials
$45.00 ISO 7246:1984 Pipes and fittings of acrylonitrile/styrene/acrylester (ASA) -- General specification for moulding and extrusion materials
$45.00 ISO 727-1:2002 Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure - Part 1: Metric series
$68.00 ISO 727-2:2005 Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure - Part 2: Inch-based series
$68.00 ISO 7432:2002 Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods to prove the design of locked socket-and-spigot joints, including double-socket joints, with elastomeric seals
$45.00 ISO 7510:1997 Plastics piping systems -- Glass-reinforced plastics (GRP) components -- Determination of the amounts of constituents using the gravimetric method
$45.00 ISO 7511:1999 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods to prove the leaktightness of the wall under short-term internal pressure
$45.00 ISO 7686:2005 Plastics pipes and fittings - Determination of opacity
$68.00 ISO 8283-1:1991 Plastics pipes and fittings - Dimensions of sockets and spigots for discharge systems inside buildings - Part 1: Unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C)
$45.00 ISO 8283-2:1992 Plastics pipes and fittings - Dimensions of sockets and spigots for discharge systems inside buildings - Part 2: Polyethylene (PE)
$45.00 ISO 8283-3:1992 Plastics pipes and fittings - Dimensions of sockets and spigots for discharge systems inside buildings - Part 3: Polypropylene (PP)
$68.00 ISO 8283-4:1992 Plastics pipes and fittings - Dimensions of sockets and spigots for discharge systems inside buildings - Part 4: Acrylonitrile/butadiene/styrene (ABS)
$45.00 ISO 8361-1:1991 Thermoplastics pipes and fittings -- Water absorption -- Part 1: General test method
$45.00 ISO 8361-2:1991 Thermoplastics pipes and fittings -- Water absorption -- Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings
$45.00 ISO 8361-3:1991 Thermoplastics pipes and fittings -- Water absorption -- Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) pipes and fittings
$68.00 ISO 8483:2003 Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods to prove the design of bolted flange joints
$19.00 ISO 8483/Amd1:2012 Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods to prove the design of bolted flange joints - Amendment 1
$68.00 ISO 8533:2003 Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods to prove the design of cemented or wrapped joints
$19.00 ISO 8533/Amd1:2012 Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods to prove the design of cemented or wrapped joints - Amendment 1
$138.00 ISO 8772:2006 Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE)
$138.00 ISO 8773:2006 Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP)
$45.00 ISO 9623:1997 PE/metal and PP/metal adaptor fittings for pipes for fluids under pressure -- Design lengths and size of threads -- Metric series
$45.00 ISO 9853:1991 Injection-moulded unplasticized poly(vinyl chloride) (PVC-U) fittings for pressure pipe systems -- Crushing test
$97.00 JIS K 6770:2016 Crosslinked polyethylene (PE-X) pipe fittings
$59.00 JIS K 6770:2004 Crosslinked polyethylene (PE-X) pipe fittings
$9.00 JIS K 6770:2004/AMENDMENT 3:2010 Crosslinked polyethylene (PE-X) pipe fittings (Amendment 3)
$10.00 JIS K 6777:2007/AMENDMENT 2:2010 Chlorinated poly (vinyl chloride) (PVC-C) pipe fittings for hot and cold water supply (Amendment 2)
$68.00 JIS K 6779:2004 Polybutene (PB) pipe fittings
$10.00 JIS K 6779:2004/AMENDMENT 2:2010 Polybutene (PB) pipe fittings (Amendment 2)
$97.00 JIS K 6788:2016 Crosslinked polyethylene (PE-X) pipe fittings for water supply
$59.00 JIS K 6788:2004 Crosslinked polyethylene (PE-X) pipe fittings for water supply
$9.00 JIS K 6788:2004/AMENDMENT 2:2010 Crosslinked polyethylene (PE-X) pipe fittings for water supply (Amendment 2)
$10.00 JIS K 6793:2004/AMENDMENT 2:2010 Polybutene (PB) pipe fittings for water supply (Amendment 2)
$138.00 ISO 12176-1:2017 Plastics pipes and fittings - Equipment for fusion jointing polyethylene systems - Part 1: Butt fusion
$19.00 ISO 13260:2010/Amd1:2017 - Amendment 1
$45.00 ISO 13761:2017 Plastics pipes and fittings - Pressure reduction factors for polyethylene pipeline systems for use at temperatures above 20 degrees C
$138.00 ISO 16611:2017 Plastics piping systems for drainage and sewerage without pressure - Non-circular pipes and joints made of glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resins (UP) - Dimensions, requirements and tests
$45.00 ISO 7510:2017 Plastics piping systems - Glass-reinforced plastics (GRP) components - Determination of the amounts of constituents
$103.00 ISO 10464:2004 Gas cylinders - Refillable welded steel cylinders for liquefied petroleum gas (LPG) - Periodic inspection and testing
$88.00 ISO 10838-1:2000 Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels -- Part 1: Metal fittings for pipes of nominal outside diameter less than or equal to 63 mm
$88.00 ISO 10838-2:2000 Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels -- Part 2: Metal fittings for pipes of nominal outside diameter greater than 63 mm
$123.00 ISO 10838-3:2001 Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels -- Part 3: Thermoplastics fittings for pipes of nominal outside diameter less than or equal to 63 mm
$162.00 ISO/TS 10839:2000 Polyethylene pipes and fittings for the supply of gaseous fuels - Code of practice for design, handling and installation
$173.00 ISO 10933:1997 Polyethylene (PE) valves for gas distribution systems
$103.00 ISO 11299-1:2011 Plastics piping systems for renovation of underground gas supply networks - Part 1: General
$103.00 ISO 11299-3:2011 Plastics piping systems for renovation of underground gas supply networks - Part 3: Lining with close-fit pipes
$45.00 ISO 11563:2003 Crude petroleum and petroleum products - Bulk cargo transfer - Guidelines for achieving the fullness of pipelines
$68.00 ISO 11759:1999 Rubber hoses and hose assemblies for dispensing liquefied petroleum gases (LPGs) -- Specification
$138.00 ISO 12176-1:2012 Plastics pipes and fittings - Equipment for fusion jointing polyethylene systems - Part 1: Butt fusion
$138.00 ISO 12176-2:2008 Plastics pipes and fittings - Equipment for fusion jointing polyethylene systems - Part 2: Electrofusion
$138.00 ISO 12176-4:2003 Plastics pipes and fittings - Equipment for fusion jointing polyethylene systems - Part 4: Traceability coding
$232.00 ISO/TR 12489:2013 Petroleum, petrochemical and natural gas industries - Reliability modelling and calculation of safety systems
$209.00 ISO 12490:2011 Petroleum and natural gas industries - Mechanical integrity and sizing of actuators and mounting kits for pipeline valves
$138.00 ISO/TS 12747:2011 Petroleum and natural gas industries - Pipeline transportation systems - Recommended practice for pipeline life extension
$103.00 ISO 12991:2012 Liquefied natural gas (LNG) - Tanks for on-board storage as a fuel for automotive vehicles
$232.00 ISO 13623:2009 Petroleum and natural gas industries - Pipeline transportation systems
$232.00 ISO 13679:2002 Petroleum and natural gas industries - Procedures for testing casing and tubing connections
$232.00 ISO 13847:2013 Petroleum and natural gas industries - Pipeline transportation systems - Welding of pipelines
$232.00 ISO 14224:2016 Petroleum, petrochemical and natural gas industries - Collection and exchange of reliability and maintenance data for equipment
$265.00 ISO 14224:2006 Petroleum, petrochemical and natural gas industries - Collection and exchange of reliability and maintenance data for equipment
$209.00 ISO 14313:2007 Petroleum and natural gas industries - Pipeline transportation systems - Pipeline valves
$138.00 ISO 14531-1:2002 Plastics pipes and fittings - Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels - Metric series Specifications - Part 1: Pipes
$162.00 ISO 14531-2:2004 Plastics pipes and fittings - Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels - Metric series - Specifications - Part 2: Fittings for heat-fusion jointing
$138.00 ISO 14531-3:2010 Plastics pipes and fittings - Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels - Metric series - Specifications - Part 3: Fittings for mechanical jointing (including PE-X/metal transitions)
$103.00 ISO 14531-4:2006 Plastics pipes and fittings - Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels - Metric series - Specifications - Part 4: System design and installation guidelines
$138.00 ISO 14692-1:2002 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 1: Vocabulary, symbols, applications and materials
$232.00 ISO 14692-2:2002 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 2: Qualification and manufacture
$209.00 ISO 14692-3:2002 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 3: System design
$209.00 ISO 14692-4:2002 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 4: Fabrication, installation and operation
$209.00 ISO 14723:2009 Petroleum and natural gas industries - Pipeline transportation systems - Subsea pipeline valves
$209.00 ISO 15589-1:2015 Petroleum, petrochemical and natural gas industries - Cathodic protection of pipeline systems - Part 1: On-land pipelines
$200.00 ISO 15589-1:2003 Petroleum and natural gas industries - Cathodic protection of pipeline transportation systems - Part 1: On-land pipelines
$209.00 ISO 15589-2:2012 Petroleum, petrochemical and natural gas industries - Cathodic protection of pipeline transportation systems - Part 2: Offshore pipelines
$162.00 ISO 15590-1:2009 Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 1: Induction bends
$138.00 ISO 15590-2:2003 Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 2: Fittings
$103.00 ISO 15590-3:2004 Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 3: Flanges
$103.00 ISO 15649:2001 Petroleum and natural gas industries -- Piping
$185.00 ISO 16380:2014 Road vehicles - Blended fuels refuelling connector
$19.00 ISO 16380:2014/Amd1:2016 - Amendment 1
$185.00 ISO 16440:2016 Petroleum and natural gas industries - Pipeline transportation systems - Design, construction and maintenance of steel cased pipelines
$138.00 ISO 16486-1:2012 Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 1: General
$19.00 ISO 16486-1:2012/Amd1:2014 - Amendment 1
$68.00 ISO 16486-2:2012 Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 2: Pipes
$19.00 ISO 16486-2:2012/Amd1:2014 - Amendment 1
$103.00 ISO 16486-3:2012 Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 3: Fittings
$19.00 ISO 16486-3:2012/Amd1:2014 - Amendment 1
$103.00 ISO 16486-4:2016 Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 4: Valves
$138.00 ISO 16486-5:2012 Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 5: Fitness for purpose of the system
$138.00 ISO 16486-6:2012 Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 6: Code of practice for design, handling and installation
$209.00 ISO 16708:2006 Petroleum and natural gas industries - Pipeline transportation systems - Reliability-based limit state methods
$185.00 ISO 16923:2016 Natural gas fuelling stations - CNG stations for fuelling vehicles
$209.00 ISO 16924:2016 Natural gas fuelling stations - LNG stations for fuelling vehicles
$185.00 ISO 16961:2015 Petroleum, petrochemical and natural gas industries - Internal coating and lining of steel storage tanks
$162.00 ISO/TR 17177:2015 Petroleum and natural gas industries - Guidelines for the marine interfaces of hybrid LNG terminals
$138.00 ISO 17292:2015 Metal ball valves for petroleum, petrochemical and allied industries
$19.00 ISO 17885:2015/Amd1:2016 - Amendment 1
$103.00 ISO 18225:2012 Plastics piping systems - Multilayer piping systems for outdoor gas installations - Specifications for systems
$185.00 ISO/TS 18226:2006 Plastics pipes and fittings - Reinforced thermoplastics pipe systems for the supply of gaseous fuels for pressures up to 4 MPa (40 bar)
$138.00 ISO 1823:2015 Rubber hose and hose assemblies for oil suction and discharge service - Specification
$88.00 ISO 1823-1:1997 Rubber hoses and hose assemblies - Part 1: On-shore oil suction and discharge - Specification
$88.00 ISO 1823-2:1997 Rubber hoses and hose assemblies - Part 2: Ship/dockside discharge - Specification
$185.00 ISO/TS 18683:2015 Guidelines for systems and installations for supply of LNG as fuel to ships
$138.00 ISO 20088-1:2016 Determination of the resistance to cryogenic spillage of insulation materials - Part 1: Liquid phase
$209.00 ISO 20815:2008 Petroleum, petrochemical and natural gas industries - Production assurance and reliability management
$68.00 ISO 21307:2011 Plastics pipes and fittings - Butt fusion jointing procedures for polyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems
$232.00 ISO 21329:2004 Petroleum and natural gas industries - Pipeline transportation systems - Test procedures for mechanical connectors
$209.00 ISO 21809-1:2011 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 1: Polyolefin coatings (3-layer PE and 3-layer PP)
$185.00 ISO 21809-2:2014 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 2: Single layer fusion-bonded epoxy coatings
$180.00 ISO 21809-2:2007 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 2: Fusion-bonded epoxy coatings
$232.00 ISO 21809-3:2016 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings
$265.00 ISO 21809-3:2008 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings
$22.00 ISO 21809-3/Amd1:2011 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings - AMENDMENT 1
$162.00 ISO 21809-4:2009 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 4: Polyethylene coatings (2-layer PE)
$162.00 ISO 21809-5:2010 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 5: External concrete coatings
$162.00 ISO 22991:2004 Gas cylinders - Transportable refillable welded steel cylinders for liquefied petroleum gas (LPG) - Design and construction
$103.00 ISO 27127:2014 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas - Specification
$162.00 ISO 28460:2010 Petroleum and natural gas industries - Installation and equipment for liquefied natural gas - Ship-to-shore interface and port operations
$68.00 ISO 2928:2003 Rubber hoses and hose assemblies for liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas up to 25 bar (2,5 MPa) -- Specification
$103.00 ISO 2929:2014 Rubber hoses and hose assemblies for bulk fuel delivery by truck - Specification
$232.00 ISO 3183:2012 Petroleum and natural gas industries - Steel pipe for pipeline transportation systems
$103.00 ISO 4437-1:2014 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General
$103.00 ISO 4437-2:2014 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 2: Pipes
$162.00 ISO 4437-3:2014 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 3: Fittings
$103.00 ISO 4437-4:2015 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 4: Valves
$68.00 ISO 4437-5:2014 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 5: Fitness for purpose of the system
$138.00 ISO 5772:2015 Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems - Specification
$88.00 ISO 5772:1998 Rubber hoses and hose assemblies for measured fuel dispensing - Specification
$45.00 ISO 6447:1983 Rubber seals - Joint rings used for gas supply pipes and fittings - Specification for material
$45.00 ISO 6448:1985 Rubber seals - Joint rings used for petroleum product supply pipes and fittings - Specification for material
$103.00 ISO 6808:2014 Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids - Specification
$99.00 ISO 6808:1999 Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids - Specification
$103.00 ISO 6993-1:2006 Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels - Part 1: Pipes for a maximum operating pressure of 1 bar (100 kPa)
$103.00 ISO 6993-2:2006 Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels - Part 2: Fittings for a maximum operating pressure of 200 mbar (20 kPa)
$138.00 ISO 6993-3:2006 Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels - Part 3: Fittings and saddles for a maximum operating pressure of 1 bar (100 kPa)
$103.00 ISO 6993-4:2006 Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels - Part 4: Code of practice for design, handling and installation
$45.00 ISO 9158:1988 Road vehicles -- Nozzle spouts for unleaded gasoline
$45.00 ISO 9159:1988 Road vehicles -- Nozzle spouts for leaded gasoline and diesel fuel
$232.00 ISO/PAS 12835:2013 Qualification of casing connections for thermal wells
$107.00 JIS B 8572-1:2008 Fuel oil flow meters -- Measuring instruments used in transaction or certification -- Part 1: Fuel dispensers for motor vehicles
$138.00 ISO 12176-1:2017 Plastics pipes and fittings - Equipment for fusion jointing polyethylene systems - Part 1: Butt fusion
$209.00 ISO 14692-1:2017 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 1: Vocabulary, symbols, applications and materials
$209.00 ISO 14692-2:2017 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 2: Qualification and manufacture
$185.00 ISO 14692-3:2017 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 3: System design
$209.00 ISO 14692-4:2017 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 4: Fabrication, installation and operation
$162.00 ISO 21809-5:2017 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 5: External concrete coatings
$232.00 ISO 13623:2017 Petroleum and natural gas industries - Pipeline transportation systems