ISO 17089-2:2012 - $185.00   BUY NOW

Measurement of fluid flow in closed conduits - Ultrasonic meters for gas - Part 2: Meters for industrial applications

ISO 17089-2:2012 Publication Description:

--- Abstract Source: ISO 17089-2:2012 ---

ISO 17089-1:2010 specifies requirements and recommendations for ultrasonic gas flowmeters (USMs), which utilize the transit time of acoustic signals to measure the flow of single phase homogenous gases in closed conduits.

ISO 17089-1:2010 applies to transit time ultrasonic gas flowmeters used for custody transfer and allocation metering, such as full-bore, reduced-area, high-pressure, and low-pressure meters or any combination of these. There are no limits on the minimum or maximum sizes of the meter. ISO 17089-1:2010 can be applied to the measurement of almost any type of gas, such as air, natural gas, and ethane.

Included are flow measurement performance requirements for meters of two accuracy classes suitable for applications such as custody transfer and allocation measurement.

ISO 17089-1:2010 specifies construction, performance, calibration, and output characteristics of ultrasonic meters for gas flow measurement and deals with installation conditions.

International Classification for Standards (ICS)

ICS Classification Field ICS Field Sub-Group and Number
ICS-17-Metrology ICS Flow-Closed Conduits (17.120.10)

ICS Related Standards

Cart Document Number Document Title
$185.00 ISO 10790:2015 Measurement of fluid flow in closed conduits - Guidance to the selection, installation and use of Coriolis flowmeters (mass flow, density and volume flow measurements)
$173.00 ISO 10790:1999 Measurement of fluid flow in closed conduits -- Guidance to the selection, installation and use of Coriolis meters (mass flow, density and volume flow measurements)
$22.00 ISO 10790/Amd1:2003 Measurement of fluid flow in closed conduits - Coriolis mass flowmeters - Amendment 1: Guidelines for gas measurement
$138.00 ISO/TR 11583:2012 Measurement of wet gas flow by means of pressure differential devices inserted in circular cross-section conduits
$103.00 ISO 11631:1998 Measurement of fluid flow - Methods of specifying flowmeter performance
$209.00 ISO 12242:2012 Measurement of fluid flow in closed conduits - Ultrasonic transit-time meters for liquid
$162.00 ISO/TR 12767:2007 Measurement of fluid flow by means of pressure differential devices - Guidelines on the effect of departure from the specifications and operating conditions given in ISO 5167
$45.00 ISO 13359:1998 Measurement of conductive liquid flow in closed conduits - Flanged electromagnetic flowmeters - Overall length
$103.00 ISO 14164:1999 Stationary source emissions -- Determination of the volume flowrate of gas streams in ducts -- Automated method
$162.00 ISO 14511:2001 Measurement of fluid flow in closed conduits - Thermal mass flowmeters
$138.00 ISO/TR 15377:2007 Measurement of fluid flow by means of pressure-differential devices - Guidelines for the specification of orifice plates, nozzles and Venturi tubes beyond the scope of ISO 5167
$232.00 ISO 17089-1:2010 Measurement of fluid flow in closed conduits - Ultrasonic meters for gas - Part 1: Meters for custody transfer and allocation measurement
$138.00 ISO 2186:2007 Fluid flow in closed conduits - Connections for pressure signal transmissions between primary and secondary elements
$68.00 ISO 2975-1:1974 Measurement of water flow in closed conduits - Tracer methods - Part 1: General
$68.00 ISO 2975-2:1975 Measurement of water flow in closed conduits - Tracer methods - Part 2: Constant rate injection method using non-radioactive tracers
$68.00 ISO 2975-3:1976 Measurement of water flow in closed conduits - Tracer methods - Part 3: Constant rate injection method using radioactive tracers
$103.00 ISO 2975-6:1977 Measurement of water flow in closed conduits - Tracer methods - Part 6: Transit time method using non-radioactive tracers
$68.00 ISO 2975-7:1977 Measurement of water flow in closed conduits - Tracer methods - Part 7: Transit time method using radioactive tracers
$209.00 ISO 3354:2008 Measurement of clean water flow in closed conduits - Velocity-area method using current-meters in full conduits and under regular flow conditions
$209.00 ISO 3966:2008 Measurement of fluid flow in closed conduits - Velocity area method using Pitot static tubes
$209.00 ISO 4006:1991 Measurement of fluid flow in closed conduits - Vocabulary and symbols
$138.00 ISO 4185:1980 Measurement of liquid flow in closed conduits - Weighing method
$162.00 ISO 5167-1:2003 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 1: General principles and requirements
$185.00 ISO 5167-2:2003 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 2: Orifice plates
$162.00 ISO 5167-3:2003 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 3: Nozzles and Venturi nozzles
$138.00 ISO 5167-4:2003 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 4: Venturi tubes
$103.00 ISO 5167-5:2016 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 5: Cone meters
$209.00 ISO 5168:2005 Measurement of fluid flow - Procedures for the evaluation of uncertainties
$103.00 ISO 6817:1992 Measurement of conductive liquid flow in closed conduits - Method using electromagnetic flowmeters
$162.00 ISO 7066-2:1988 Assessment of uncertainty in the calibration and use of flow measurement devices - Part 2 : Non-linear calibration relationships
$162.00 ISO 7194:2008 Measurement of fluid flow in closed conduits - Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or Pitot static tubes
$138.00 ISO 8316:1987 Measurement of liquid flow in closed conduits - Method by collection of the liquid in a volumetric tank
$103.00 ISO 9104:1991 Measurement of fluid flow in closed conduits - Methods of evaluating the performance of electromagnetic flow-meters for liquids
$185.00 ISO 9300:2005 Measurement of gas flow by means of critical flow Venturi nozzles
$103.00 ISO 9368-1:1990 Measurement of liquid flow in closed conduits by the weighing method - Procedures for checking installations - Part 1: Static weighing systems
$209.00 ISO/TR 9464:2008 Guidelines for the use of ISO 5167:2003
$162.00 ISO/TR 9824:2007 Hydrometry - Measurement of free surface flow in closed conduits
$103.00 ISO 9951:1993 Measurement of gas flow in closed conduits - Turbine meters
$87.00 JIS B 7554:1997 Electromagnetic flowmeters
$107.00 JIS B 7555:2003 Method of flow measurement by coriolis meters (mass flow, density and volume flow measurement)
$136.00 JIS B 7556:2008 Procedures of calibration and testing for gas flowmeter
$138.00 ISO 12764:2017 Measurement of fluid flow in closed conduits - Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full
$162.00 ISO 20456:2017 Measurement of fluid flow in closed conduits - Guidance for the use of electromagnetic flowmeters for conductive liquids