ISO/TR 15658:2009 - $103.00   BUY NOW

Fire resistance tests - Guidelines for the design and conduct of non-furnace-based large-scale tests and simulation

ISO/TR 15658:2009 Publication Description:

ISO/TR 15658:2009 specifies procedures for the design, performance and reporting of fire tests which are not performed using standardized test equipment, such as furnaces or test chambers, and which are primarily duration- or time-based.

It is applicable to all ‘natural' fire tests, which set out to evaluate the behaviour of structural frames, rooms (or a suite of rooms forming part of a building), with respect to fully developed fire conditions, regardless of whether or not the heat input is by means of natural sources, e.g. cribs or burners. It is not applicable to ‘reaction-to-fire' large-scale tests, which are primarily designed to evaluate materials and for which the heating rate is slower and the maximum rate of heat release is lower than that which would occur at full development.

International Classification for Standards (ICS)

ICS Classification Field ICS Field Sub-Group and Number
ICS-13-Environment ICS Fire Protection-General (13.220.01)

ICS Related Standards

Cart Document Number Document Title
$138.00 ISO 12828-1:2011 Validation method for fire gas analysis - Part 1: Limits of detection and quantification
$162.00 ISO 12828-2:2016 Validation methods for fire gas analyses - Part 2: Intralaboratory validation of quantification methods
$138.00 ISO/TS 13447:2013 Fire safety engineering - Guidance for use of fire zone models
$138.00 ISO 13571:2012 Life-threatening components of fire - Guidelines for the estimation of time to compromised tenability in fires
$232.00 ISO/TR 13571-2:2016 Life-threatening components of fire - Part 2: Methodology and examples of tenability assessment
$209.00 ISO 13943:2008 Fire safety - Vocabulary
$138.00 ISO/TR 15656:2003 Fire resistance - Guidelines for evaluating the predictive capability of calculation models for structural fire behaviour
$209.00 ISO/TR 15657:2013 Fire resistance tests - Guidelines for computational structural fire design
$103.00 ISO 16405:2015 Room corner and open calorimeter - Guidance on sampling and measurement of effluent gas production using FTIR technique
$200.00 ISO 16730:2008 Fire safety engineering - Assessment, verification and validation of calculation methods
$185.00 ISO 16730-1:2015 Fire safety engineering - Procedures and requirements for verification and validation of calculation methods - Part 1: General
$138.00 ISO/TR 16730-2:2013 Fire safety engineering - Assessment, verification and validation of calculation methods - Part 2: Example of a fire zone model
$162.00 ISO/TR 16730-3:2013 Fire safety engineering - Assessment, verification and validation of calculation methods - Part 3: Example of a CFD model
$103.00 ISO/TR 16730-4:2013 Fire safety engineering - Assessment, verification and validation of calculation methods - Part 4: Example of a structural model
$185.00 ISO/TR 16730-5:2013 Fire safety engineering - Assessment, verification and validation of calculation methods - Part 5: Example of an Egress model
$138.00 ISO 16732-1:2012 Fire safety engineering - Fire risk assessment - Part 1: General
$103.00 ISO/TR 16732-2:2012 Fire Safety Engineering - Fire risk assessment - Part 2: Example of an office building
$138.00 ISO/TR 16732-3:2013 Fire safety engineering - Fire risk assessment - Part 3: Example of an industrial property
$200.00 ISO/TS 16733:2006 Fire safety engineering - Selection of design fire scenarios and design fires
$162.00 ISO 16733-1:2015 Fire safety engineering - Selection of design fire scenarios and design fires - Part 1: Selection of design fire scenarios
$103.00 ISO 16734:2006 Fire safety engineering - Requirements governing algebraic equations - Fire plumes
$138.00 ISO 16735:2006 Fire safety engineering - Requirements governing algebraic equations - Smoke layers
$103.00 ISO 16736:2006 Fire safety engineering - Requirements governing algebraic equations - Ceiling jet flows
$162.00 ISO 16737:2012 Fire safety engineering - Requirements governing algebraic equations - Vent flows
$209.00 ISO/TR 16738:2009 Fire-safety engineering - Technical information on methods for evaluating behaviour and movement of people
$185.00 ISO/TS 19700:2016 Controlled equivalence ratio method for the determination of hazardous components of fire effluents - Steady-state tube furnace
$173.00 ISO/TS 19700:2007 Controlled equivalence ratio method for the determination of hazardous components of fire effluents
$232.00 ISO 19701:2013 Methods for sampling and analysis of fire effluents
$209.00 ISO 19702:2015 Guidance for sampling and analysis of toxic gases and vapours in fire effluents using Fourier Transform Infrared (FTIR) spectroscopy
$173.00 ISO 19702:2006 Toxicity testing of fire effluents - Guidance for analysis of gases and vapours in fire effluents using FTIR gas analysis
$162.00 ISO 19703:2010 Generation and analysis of toxic gases in fire - Calculation of species yields, equivalence ratios and combustion efficiency in experimental fires
$68.00 ISO 19706:2011 Guidelines for assessing the fire threat to people
$209.00 ISO/TR 22898:2006 Review of outputs for fire containment tests for buildings in the context of fire safety engineering
$103.00 ISO 23932:2009 Fire safety engineering - General principles
$138.00 ISO 24678-6:2016 Fire safety engineering - Requirements governing algebraic formulae - Part 6: Flashover related phenomena
$138.00 ISO/TS 24679:2011 Fire safety engineering - Performance of structures in fire
$185.00 ISO/TR 24679-3:2015 Fire safety engineering - Performance of structure in fire - Part 3: Example of an open car park
$103.00 ISO 26367-1:2011 Guidelines for assessing the adverse environmental impact of fire effluents - Part 1: General
$138.00 ISO/TR 26368:2012 Environmental damage limitation from fire-fighting water run-off
$138.00 ISO 29473:2010 Fire tests - Uncertainty of measurements in fire tests
$138.00 ISO/TS 29761:2015 Fire safety engineering - Selection of design occupant behavioural scenarios
$138.00 ISO 29903:2012 Guidance for comparison of toxic gas data between different physical fire models and scales
$209.00 ISO 29904:2013 Fire chemistry - Generation and measurement of aerosols
$45.00 ISO 3941:2007 Classification of fires
$88.00 ISO 6790:1986 Equipment for fire protection and fire fighting - Graphical symbols for fire protection plans - Specification
$45.00 ISO 8421-1:1987 Fire protection - Vocabulary - Part 1 : General terms and phenomena of fire
$45.00 ISO 8421-2:1987 Fire protection - Vocabulary - Part 2 : Structural fire protection
$68.00 ISO 8421-3:1989 Fire protection - Vocabulary - Part 3: Fire detection and alarm
$68.00 ISO 8421-4:1990 Fire protection - Vocabulary - Part 4: Fire extinction equipment
$45.00 ISO 8421-5:1988 Fire protection - Vocabulary - Part 5 : Smoke control
$45.00 ISO 8421-6:1987 Fire protection - Vocabulary - Part 6 : Evacuation and means of escape
$45.00 ISO 8421-7:1987 Fire protection - Vocabulary - Part 7 : Explosion detection and suppression means
$138.00 ISO 8421-8:1990 Fire protection - Vocabulary - Part 8: Terms specific to fire-fighting, rescue services and handling hazardous materials
$45.00 ISO 13943:2017 Fire safety - Vocabulary
$232.00 ISO/TR 16576:2017 Fire safety engineering - Examples of fire safety objectives, functional requirements and safety criteria
$162.00 ISO/TR 24679-2:2017 Fire safety engineering - Performance of structure in fire - Part 2: Example of an airport terminal
$185.00 ISO/TR 24679-4:2017 Fire safety engineering - Performance of structures in fire - Part 4: Example of a fifteen-storey steel-framed office building
$185.00 ISO 26367-2:2017 Guidelines for assessing the adverse environmental impact of fire effluents - Part 2: Methodology for compiling data on environmentally significant emissions from fires