ISO 15534-2:2000 - $138.00   BUY NOW

Ergonomic design for the safety of machinery - Part 2: Principles for determining the dimensions required for access openings

ISO 15534-2:2000 Publication Description:

This part of ISO 15534 specifies the dimensions of openings for access into machinery as defined in ISO/TR 12100-1. It provides the dimensions to which the values given in ISO 15534-3 are applicable. Values for additional space requirements are given in annex A. This part of ISO 15534 has been prepared primarily for non-mobile machinery; there may be additional specific requirements for mobile machinery.

Dimensions for access openings are based on the values for the 95th percentile, whereas reach distances are based on the values for the 5th percentile, in each case the least favourable body dimension of the expected user population being used as a basis. The same considerations apply to the location of access openings.

The anthropometric data given in ISO 15534-3 originate from static measurements of nude persons and do not take into account body movements, clothing, equipment, machinery-operating conditions or environmental conditions.

This part of ISO 15534 shows how to combine the anthropometric data with suitable allowances to take these factors into account.

Situations where people are to be prevented from reaching a hazard are dealt with in ISO 13852.

International Classification for Standards (ICS)

ICS Classification Field ICS Field Sub-Group and Number
ICS-13-Environment ICS Ergonomics (13.180)
ICS-13-Environment ICS Safety-Machinery (13.110)

ICS Related Standards

Cart Document Number Document Title
$45.00 ISO 10075:1991 Ergonomic principles related to mental work-load - General terms and definitions
$68.00 ISO 10075-2:1996 Ergonomic principles related to mental workload - Part 2: Design principles
$103.00 ISO 10075-3:2004 Ergonomic principles related to mental workload - Part 3: Principles and requirements concerning methods for measuring and assessing mental workload
$103.00 ISO 10551:1995 Ergonomics of the thermal environment - Assessment of the influence of the thermal environment using subjective judgement scales
$162.00 ISO 11064-1:2000 Ergonomic design of control centres -- Part 1: Principles for the design of control centres
$103.00 ISO 11064-2:2000 Ergonomic design of control centres -- Part 2: Principles for the arrangement of control suites
$162.00 ISO 11064-3:1999 Ergonomic design of control centres -- Part 3: Control room layout
$185.00 ISO 11064-4:2013 Ergonomic design of control centres - Part 4: Layout and dimensions of workstations
$185.00 ISO 11064-5:2008 Ergonomic design of control centres - Part 5: Displays and controls
$138.00 ISO 11064-6:2005 Ergonomic design of control centres - Part 6: Environmental requirements for control centres
$138.00 ISO 11064-7:2006 Ergonomic design of control centres - Part 7: Principles for the evaluation of control centres
$162.00 ISO 11079:2007 Ergonomics of the thermal environment - Determination and interpretation of cold stress when using required clothing insulation (IREQ) and local cooling effects
$138.00 ISO 11226:2000 Ergonomics -- Evaluation of static working postures
$138.00 ISO 11228-1:2003 Ergonomics - Manual handling - Part 1: Lifting and carrying
$209.00 ISO 11228-2:2007 Ergonomics - Manual handling - Part 2: Pushing and pulling
$209.00 ISO 11228-3:2007 Ergonomics - Manual handling - Part 3: Handling of low loads at high frequency
$138.00 ISO 11399:1995 Ergonomics of the thermal environment - Principles and application of relevant International Standards
$68.00 ISO 11428:1996 Ergonomics - Visual danger signals - General requirements, design and testing
$68.00 ISO 11429:1996 Ergonomics - System of auditory and visual danger and information signals
$209.00 ISO/TR 12295:2014 Ergonomics - Application document for International Standards on manual handling (ISO 11228-1, ISO 11228-2 and ISO 11228-3) and evaluation of static working postures (ISO 11226)
$232.00 ISO/TR 12296:2012 Ergonomics - Manual handling of people in the healthcare sector
$162.00 ISO 12894:2001 Ergonomics of the thermal environment -- Medical supervision of individuals exposed to extreme hot or cold environments
$162.00 ISO 13731:2001 Ergonomics of the thermal environment - Vocabulary and symbols
$185.00 ISO 13732-1:2006 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces
$68.00 ISO/TS 13732-2:2001 Ergonomics of the thermal environment -- Methods for the assessment of human responses to contact with surfaces -- Part 2: Human contact with surfaces at moderate temperature
$138.00 ISO 13732-3:2005 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 3: Cold surfaces
$103.00 ISO/TS 14198:2012 Road vehicles - Ergonomic aspects of transport information and control systems - Calibration tasks for methods which assess driver demand due to the use of in-vehicle systems
$88.00 ISO/TS 14415:2005 Ergonomics of the thermal environment - Application of International Standards to people with special requirements
$68.00 ISO/TS 14505-1:2007 Ergonomics of the thermal environment - Evaluation of thermal environments in vehicles - Part 1: Principles and methods for assessment of thermal stress
$138.00 ISO 14505-2:2006 Ergonomics of the thermal environment - Evaluation of thermal environments in vehicles - Part 2: Determination of equivalent temperature
$103.00 ISO 14505-3:2006 Ergonomics of the thermal environment - Evaluation of thermal environments in vehicles - Part 3: Evaluation of thermal comfort using human subjects
$138.00 ISO 14738:2002 Safety of machinery -- Anthropometric requirements for the design of workstations at machinery
$68.00 ISO 14915-1:2002 Software ergonomics for multimedia user interfaces - Part 1: Design principles and framework
$162.00 ISO 14915-2:2003 Software ergonomics for multimedia user interfaces - Part 2: Multimedia navigation and control
$185.00 ISO 14915-3:2002 Software ergonomics for multimedia user interfaces -- Part 3: Media selection and combination
$103.00 ISO 15005:2002 Road vehicles - Ergonomic aspects of transport information and control systems - Dialogue management principles and compliance procedures
$103.00 ISO 15006:2011 Road vehicles - Ergonomic aspects of transport information and control systems - Specifications for in-vehicle auditory presentation
$103.00 ISO 15007-1:2014 Road vehicles - Measurement of driver visual behaviour with respect to transport information and control systems - Part 1: Definitions and parameters
$77.00 ISO 15007-1:2002 Road vehicles - Measurement of driver visual behaviour with respect to transport information and control systems - Part 1: Definitions and parameters
$103.00 ISO/TS 15007-2:2014 Road vehicles - Measurement of driver visual behaviour with respect to transport information and control systems - Part 2: Equipment and procedures
$77.00 ISO/TS 15007-2:2001 Road vehicles - Measurement of driver visual behaviour with respect to transport information and control systems - Part 2: Equipment and procedures
$103.00 ISO 15008:2009 Road vehicles - Ergonomic aspects of transport information and control systems - Specifications and test procedures for in-vehicle visual presentation
$185.00 ISO 1503:2008 Spatial orientation and direction of movement - Ergonomic requirements
$103.00 ISO 15265:2004 Ergonomics of the thermal environment - Risk assessment strategy for the prevention of stress or discomfort in thermal working conditions
$68.00 ISO 15534-1:2000 Ergonomic design for the safety of machinery - Part 1: Principles for determining the dimensions required for openings for whole-body access into machinery
$45.00 ISO 15534-3:2000 Ergonomic design for the safety of machinery - Part 3: Anthropometric data
$138.00 ISO 15535:2012 General requirements for establishing anthropometric databases
$68.00 ISO 15536-1:2005 Ergonomics - Computer manikins and body templates - Part 1: General requirements
$103.00 ISO 15536-2:2007 Ergonomics - Computer manikins and body templates - Part 2: Verification of functions and validation of dimensions for computer manikin systems
$68.00 ISO 15537:2004 Principles for selecting and using test persons for testing anthropometric aspects of industrial products and designs
$162.00 ISO 15743:2008 Ergonomics of the thermal environment - Cold workplaces - Risk assessment and management
$103.00 ISO 16121-1:2012 Road vehicles - Ergonomic requirements for the drivers workplace in line-service buses - Part 1: General description, basic requirements
$45.00 ISO 16121-2:2011 Road vehicles - Ergonomic requirements for the drivers workplace in line-service buses - Part 2: Visibility
$68.00 ISO 16121-3:2011 Road vehicles - Ergonomic requirements for the drivers workplace in line-service buses - Part 3: Information devices and controls
$45.00 ISO 16121-4:2011 Road vehicles - Ergonomic requirements for the drivers workplace in line-service buses - Part 4: Cabin environment
$232.00 ISO/TR 16352:2005 Road vehicles - Ergonomic aspects of in-vehicle presentation for transport information and control systems - Warning systems
$232.00 ISO 16505:2015 Road vehicles - Ergonomic and performance aspects of Camera Monitor Systems - Requirements and test procedures
$103.00 ISO 16673:2007 Road vehicles - Ergonomic aspects of transport information and control systems - Occlusion method to assess visual demand due to the use of in-vehicle systems
$162.00 ISO/TS 16951:2004 Road vehicles - Ergonomic aspects of transport information and control systems (TICS) - Procedures for determining priority of on-board messages presented to drivers
$185.00 ISO/TR 16982:2002 Ergonomics of human-system interaction - Usability methods supporting human-centred design
$68.00 ISO 17049:2013 Accessible design - Application of braille on signage, equipment and appliances
$103.00 ISO 17069:2014 Accessible design - Consideration and assistive products for accessible meeting
$162.00 ISO 17287:2003 Road vehicles - Ergonomic aspects of transport information and control systems - Procedure for assessing suitability for use while driving
$138.00 ISO/TS 17929:2014 Biomechanical effects on amusement ride passengers
$232.00 ISO/TS 18152:2010 Ergonomics of human-system interaction - Specification for the process assessment of human-system issues
$162.00 ISO/TR 18529:2000 Ergonomics -- Ergonomics of human-system interaction -- Human-centred lifecycle process descriptions
$45.00 ISO 19026:2015 Accessible design - Shape and colour of a flushing button and a call button, and their arrangement with a paper dispenser installed on the wall in public restroom
$162.00 ISO 19027:2016 Design principles for communication support board using pictorial symbols
$162.00 ISO 19028:2016 Accessible design - Information contents, figuration and display methods of tactile guide maps
$45.00 ISO 19029:2016 Accessible design - Auditory guiding signals in public facilities
$103.00 ISO/TR 19358:2002 Ergonomics -- Construction and application of tests for speech technology (available in English only)
$103.00 ISO/TR 20278:2015 Unwanted reflections from the active and inactive areas of display surfaces visible during use
$162.00 ISO 20282-1:2006 Ease of operation of everyday products - Part 1: Design requirements for context of use and user characteristics
$185.00 ISO/TS 20282-2:2013 Usability of consumer products and products for public use - Part 2: Summative test method
$138.00 ISO/TS 20646:2014 Ergonomic procedures for the improvement of local muscular workloads
$138.00 ISO 20685:2010 3-D scanning methodologies for internationally compatible anthropometric databases
$138.00 ISO 20685-2:2015 Ergonomics - 3-D scanning methodologies for internationally compatible anthropometric databases - Part 2: Evaluation protocol of surface shape and repeatability of relative landmark positions
$103.00 ISO/TS 21144:2016 Ergonomics of human-system interaction - Electronic paper display - Indoor use
$185.00 ISO/TR 22100-3:2016 Safety of machinery - Relationship with ISO 12100 - Part 3: Implementation of ergonomic principles in safety standards
$68.00 ISO 24500:2010 Ergonomics - Accessible design - Auditory signals for consumer products
$138.00 ISO 24501:2010 Ergonomics - Accessible design - Sound pressure levels of auditory signals for consumer products
$68.00 ISO 24502:2010 Ergonomics - Accessible design - Specification of age-related luminance contrast for coloured light
$45.00 ISO 24503:2011 Ergonomics - Accessible design -Tactile dots and bars on consumer products
$138.00 ISO 24504:2014 Ergonomics - Accessible design - Sound pressure levels of spoken announcements for products and public address systems
$138.00 ISO 24505:2016 Ergonomics - Accessible design - Method for creating colour combinations taking account of age-related changes in human colour vision
$185.00 ISO 26022:2010 Road vehicles - Ergonomic aspects of transport information and control systems - Simulated lane change test to assess in-vehicle secondary task demand
$103.00 ISO 26800:2011 Ergonomics - General approach, principles and concepts
$138.00 ISO 27500:2016 The human-centred organization - Rationale and general principles
$138.00 ISO 28802:2012 Ergonomics of the physical environment - Assessment of environments by means of an environmental survey involving physical measurements of the environment and subjective responses of people
$138.00 ISO 28803:2012 Ergonomics of the physical environment - Application of International Standards to people with special requirements
$103.00 ISO 6385:2016 Ergonomics principles in the design of work systems
$88.00 ISO 6385:2004 Ergonomic principles in the design of work systems
$68.00 ISO 7243:1989 Hot environments - Estimation of the heat stress on working man, based on the WBGT-index (wet bulb globe temperature)
$138.00 ISO 7250-1:2008 Basic human body measurements for technological design - Part 1: Body measurement definitions and landmarks
$209.00 ISO/TR 7250-2:2010 Basic human body measurements for technological design - Part 2: Statistical summaries of body measurements from individual ISO populations
$19.00 ISO/TR 7250-2:2010/Amd1:2013 - Amendment 1
$162.00 ISO 7250-3:2015 Basic human body measurements for technological design - Part 3: Worldwide and regional design ranges for use in product standards
$209.00 ISO 7726:1998 Ergonomics of the thermal environment - Instruments for measuring physical quantities
$209.00 ISO 7730:2005 Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria
$103.00 ISO 7731:2003 Ergonomics - Danger signals for public and work areas - Auditory danger signals
$162.00 ISO 7933:2004 Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using calculation of the predicted heat strain
$103.00 ISO 8995-1:2002 Lighting of work places - Part 1: Indoor
$45.00 ISO 8995-3:2006 Lighting of work places - Part 3: Lighting requirements for safety and security of outdoor work places
$138.00 ISO 8996:2004 Ergonomics of the thermal environment - Determination of metabolic rate
$68.00 ISO 9241-1:1997 Ergonomic requirements for office work with visual display terminals (VDTs) - Part 1: General introduction
$138.00 ISO/TR 9241-100:2010 Ergonomics of human-system interaction - Part 100: Introduction to standards related to software ergonomics
$138.00 ISO 9241-11:1998 Ergonomic requirements for office work with visual display terminals (VDTs) - Part 11: Guidance on usability
$19.00 ISO 9241-1/Amd1:2001 Amendement 1
$138.00 ISO 9241-110:2006 Ergonomics of human-system interaction - Part 110: Dialogue principles
$200.00 ISO 9241-12:1998 Ergonomic requirements for office work with visual display terminals (VDTs) - Part 12: Presentation of information
$209.00 ISO 9241-129:2010 Ergonomics of human-system interaction - Part 129: Guidance on software individualization
$162.00 ISO 9241-13:1998 Ergonomic requirements for office work with visual display terminals (VDTs) - Part 13: User guidance
$209.00 ISO 9241-14:1997 Ergonomic requirements for office work with visual display terminals (VDTs) - Part 14: Menu dialogues
$232.00 ISO 9241-143:2012 Ergonomics of human-system interaction - Part 143: Forms
$162.00 ISO 9241-15:1997 Ergonomic requirements for office work with visual display terminals (VDTs) - Part 15: Command dialogues
$185.00 ISO 9241-151:2008 Ergonomics of human-system interaction - Part 151: Guidance on World Wide Web user interfaces
$162.00 ISO 9241-154:2013 Ergonomics of human-system interaction - Part 154: Interactive voice response (IVR) applications
$162.00 ISO 9241-16:1999 Ergonomic requirements for office work with visual display terminals (VDTs) -- Part 16: Direct manipulation dialogues
$209.00 ISO 9241-161:2016 Ergonomics of human-system interaction - Part 161: Guidance on visual user-interface elements
$232.00 ISO 9241-171:2008 Ergonomics of human-system interaction - Part 171: Guidance on software accessibility
$45.00 ISO 9241-2:1992 Ergonomic requirements for office work with visual display terminals (VDTs) - Part 2: Guidance on task requirements
$185.00 ISO 9241-20:2008 Ergonomics of human-system interaction - Part 20: Accessibility guidelines for information/communication technology (ICT) equipment and services
$162.00 ISO 9241-210:2010 Ergonomics of human-system interaction - Part 210: Human-centred design for interactive systems
$68.00 ISO 9241-300:2008 Ergonomics of human-system interaction - Part 300: Introduction to electronic visual display requirements
$209.00 ISO 9241-302:2008 Ergonomics of human-system interaction - Part 302: Terminology for electronic visual displays
$185.00 ISO 9241-303:2011 Ergonomics of human-system interaction - Part 303: Requirements for electronic visual displays
$138.00 ISO 9241-304:2008 Ergonomics of human-system interaction - Part 304: User performance test methods for electronic visual displays
$232.00 ISO 9241-305:2008 Ergonomics of human-system interaction - Part 305: Optical laboratory test methods for electronic visual displays
$185.00 ISO 9241-306:2008 Ergonomics of human-system interaction - Part 306: Field assessment methods for electronic visual displays
$232.00 ISO 9241-307:2008 Ergonomics of human-system interaction - Part 307: Analysis and compliance test methods for electronic visual displays
$103.00 ISO/TR 9241-308:2008 Ergonomics of human-system interaction - Part 308: Surface-conduction electron-emitter displays (SED)
$103.00 ISO/TR 9241-309:2008 Ergonomics of human-system interaction - Part 309: Organic light-emitting diode (OLED) displays
$185.00 ISO/TR 9241-310:2010 Ergonomics of human-system interaction - Part 310: Visibility, aesthetics and ergonomics of pixel defects
$232.00 ISO/TR 9241-331:2012 Ergonomics of human-system interaction - Part 331: Optical characteristics of autostereoscopic displays
$103.00 ISO 9241-391:2016 Ergonomics of human-system interaction - Part 391: Requirements, analysis and compliance test methods for the reduction of photosensitive seizures
$162.00 ISO 9241-392:2015 Ergonomics of human-system interaction - Part 392: Ergonomic recommendations for the reduction of visual fatigue from stereoscopic images
$162.00 ISO 9241-400:2007 Ergonomics of human-system interaction - Part 400: Principles and requirements for physical input devices
$232.00 ISO 9241-410:2008 Ergonomics of human-system interaction - Part 410: Design criteria for physical input devices
$19.00 ISO 9241-410/Amd1:2012 Ergonomics of human-system interaction - Part 410: Design criteria for physical input devices - Amendment 1
$209.00 ISO/TS 9241-411:2012 Ergonomics of human-system interaction - Part 411: Evaluation methods for the design of physical input devices
$232.00 ISO 9241-420:2011 Ergonomics of human-system interaction - Part 420: Selection of physical input devices
$138.00 ISO 9241-5:1998 Ergonomic requirements for office work with visual display terminals (VDTs) - Part 5: Workstation layout and postural requirements
$162.00 ISO 9241-6:1999 Ergonomic requirements for office work with visual display terminals (VDTs) -- Part 6: Guidance on the work environment
$209.00 ISO 9241-910:2011 Ergonomics of human-system interaction - Part 910: Framework for tactile and haptic interaction
$138.00 ISO 9241-920:2009 Ergonomics of human-system interaction - Part 920: Guidance on tactile and haptic interactions
$103.00 ISO 9355-1:1999 Ergonomic requirements for the design of displays and control actuators -- Part 1: Human interactions with displays and control actuators
$103.00 ISO 9355-2:1999 Ergonomic requirements for the design of displays and control actuators -- Part 2: Displays
$162.00 ISO 9355-3:2006 Ergonomic requirements for the design of displays and control actuators - Part 3: Control actuators
$138.00 ISO 9886:2004 Ergonomics - Evaluation of thermal strain by physiological measurements
$232.00 ISO 9920:2007 Ergonomics of the thermal environment - Estimation of thermal insulation and water vapour resistance of a clothing ensemble
$162.00 ISO 9921:2003 Ergonomics - Assessment of speech communication
$103.00 ISO/IEC TR 29194:2015 Information Technology - Biometrics - Guide on designing accessible and inclusive biometric systems
$185.00 ISO/IEC Guide 71:2014 Guide for addressing accessibility in standards
$49.00 JIS B 9711:2002 Safety of machinery -- Minimum gaps to avoid crushing of parts of the human body
$194.00 JIS C 0922:2002 Protection of persons and equipment by enclosures for electrical apparatus -- Probes for verification
$103.00 ISO 15005:2017 Road vehicles - Ergonomic aspects of transportation and control systems - Dialogue management principles and compliance procedures
$138.00 ISO 15008:2017 Road vehicles - Ergonomic aspects of transport information and control systems - Specifications and test procedures for in-vehicle visual presentation
$103.00 ISO 7243:2017 Ergonomics of the thermal environment - Assessment of heat stress using the WBGT (wet bulb globe temperature) index
$209.00 ISO 7250-1:2017 Basic human body measurements for technological design - Part 1: Body measurement definitions and landmarks
$138.00 ISO 9241-112:2017 Ergonomics of human-system interaction - Part 112: Principles for the presentation of information
$162.00 ISO 9241-333:2017 Ergonomics of human-system interaction - Part 333: Stereoscopic displays using glasses
$68.00 ISO 10075-1:2017 Ergonomic principles related to mental workload - Part 1: General issues and concepts, terms and definitions
$185.00 ISO 9241-125:2017 Ergonomics of human-system interaction - Part 125: Guidance on visual presentation of information
$138.00 ISO 9241-960:2017 Ergonomics of human-system interaction - Part 960: Framework and guidance for gesture interactions
$103.00 ISO 16673:2017 Road vehicles - Ergonomic aspects of transport information and control systems - Occlusion method to assess visual demand due to the use of in-vehicle systems
$185.00 ISO 11161:2007 Safety of machinery - Integrated manufacturing systems - Basic requirements
$19.00 ISO 11161/Amd1:2010 Industrial automation systems - Safety of integrated manufacturing systems - Basic requirements - Amendment 1
$103.00 ISO 11553-1:2005 Safety of machinery - Laser processing machines - Part 1: General safety requirements
$138.00 ISO 11553-2:2007 Safety of machinery - Laser processing machines - Part 2: Safety requirements for hand-held laser processing devices
$68.00 ISO 11553-3:2013 Safety of machinery - Laser processing machines - Part 3: Noise reduction and noise measurement methods for laser processing machines and hand-held processing devices and associated auxiliary equipment (accuracy grade 2)
$209.00 ISO 12100:2010 Safety of machinery - General principles for design - Risk assessment and risk reduction
$103.00 ISO 13105-2:2014 Building construction machinery and equipment - Machinery for concrete surface floating and finishing - Part 2: Safety requirements and verification
$232.00 ISO 13849-1:2015 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design
$265.00 ISO 13849-1:2006 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design
$209.00 ISO 13849-2:2012 Safety of machinery - Safety-related parts of control systems - Part 2: Validation
$68.00 ISO 13850:2015 Safety of machinery - Emergency stop function - Principles for design
$51.00 ISO 13850:2006 Safety of machinery - Emergency stop - Principles for design
$138.00 ISO 13851:2002 Safety of machinery - Two-hand control devices - Functional aspects and design principles
$45.00 ISO 13854:1996 Safety of machinery - Minimum gaps to avoid crushing of parts of the human body
$185.00 ISO 13855:2010 Safety of machinery - Positioning of safeguards with respect to the approach speeds of parts of the human body
$185.00 ISO 13856-1:2013 Safety of machinery - Pressure-sensitive protective devices - Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors
$209.00 ISO 13856-2:2013 Safety of machinery - Pressure-sensitive protective devices - Part 2: General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars
$209.00 ISO 13856-3:2013 Safety of machinery - Pressure-sensitive protective devices - Part 3: General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices
$103.00 ISO 13857:2008 Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs
$103.00 ISO 14118:2000 Safety of machinery -- Prevention of unexpected start-up
$209.00 ISO 14119:2013 Safety of machinery - Interlocking devices associated with guards - Principles for design and selection
$162.00 ISO 14120:2015 Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards
$149.00 ISO 14120:2002 Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards
$185.00 ISO/TR 14121-2:2012 Safety of machinery - Risk assessment - Part 2: Practical guidance and examples of methods
$68.00 ISO 14122-1:2016 Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means and general requirements of access
$88.00 ISO 14122-1:2001 Safety of machinery -- Permanent means of access to machinery -- Part 1: Choice of fixed means of access between two levels
$22.00 ISO 14122-1/Amd1:2010 Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means of access between two levels - Amendment 1
$103.00 ISO 14122-2:2016 Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways
$88.00 ISO 14122-2:2001 Safety of machinery -- Permanent means of access to machinery -- Part 2: Working platforms and walkways
$22.00 ISO 14122-2/Amd1:2010 Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways - Amendment 1
$138.00 ISO 14122-3:2016 Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails
$123.00 ISO 14122-3:2001 Safety of machinery -- Permanent means of access to machinery -- Part 3: Stairs, stepladders and guard-rails
$22.00 ISO 14122-3/Amd1:2010 Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails - Amendment 1
$185.00 ISO 14122-4:2016 Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders
$173.00 ISO 14122-4:2004 Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders
$22.00 ISO 14122-4/Amd1:2010 Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders - Amendment 1
$68.00 ISO 14123-1:2015 Safety of machinery - Reduction of risks to health resulting from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers
$88.00 ISO 14123-1:1998 Safety of machinery - Reduction of risks to health from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers
$45.00 ISO 14123-2:2015 Safety of machinery - Reduction of risks to health resulting from hazardous substances emitted by machinery - Part 2: Methodology leading to verification procedures
$51.00 ISO 14123-2:1998 Safety of machinery - Reduction of risks to health from hazardous substances emitted by machinery - Part 2: Methodology leading to verification procedures
$162.00 ISO 14159:2002 Safety of machinery - Hygiene requirements for the design of machinery
$138.00 ISO 14738:2002 Safety of machinery -- Anthropometric requirements for the design of workstations at machinery
$68.00 ISO 15534-1:2000 Ergonomic design for the safety of machinery - Part 1: Principles for determining the dimensions required for openings for whole-body access into machinery
$45.00 ISO 15534-3:2000 Ergonomic design for the safety of machinery - Part 3: Anthropometric data
$68.00 ISO 15537:2004 Principles for selecting and using test persons for testing anthropometric aspects of industrial products and designs
$240.00 ISO/TR 18569:2004 Safety of machinery - Guidelines for the understanding and use of safety of machinery standards
$162.00 ISO 19353:2015 Safety of machinery - Fire prevention and fire protection
$149.00 ISO 19353:2005 Safety of machinery - Fire prevention and protection
$68.00 ISO 21469:2006 Safety of machinery - Lubricants with incidental product contact - Hygiene requirements
$103.00 ISO/TR 22100-1:2015 Safety of machinery - Relationship with ISO 12100 - Part 1: How ISO 12100 relates to type-B and type-C standards
$45.00 ISO/TR 22100-2:2013 Safety of machinery - Relationship with ISO 12100 - Part 2: How ISO 12100 relates to ISO 13849-1
$185.00 ISO/TR 22100-3:2016 Safety of machinery - Relationship with ISO 12100 - Part 3: Implementation of ergonomic principles in safety standards
$103.00 ISO/TR 23849:2010 Guidance on the application of ISO 13849-1 and IEC 62061 in the design of safety-related control systems for machinery
$138.00 ISO/TR 24119:2015 Safety of machinery - Evaluation of fault masking serial connection of interlocking devices associated with guards with potential free contacts
$68.00 ISO 29042-1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 1: Selection of test methods
$68.00 ISO 29042-2:2009 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 2: Tracer gas method for the measurement of the emission rate of a given pollutant
$68.00 ISO 29042-3:2009 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 3: Test bench method for the measurement of the emission rate of a given pollutant
$68.00 ISO 29042-4:2009 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 4: Tracer method for the measurement of the capture efficiency of an exhaust system
$45.00 ISO 29042-5:2010 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 5: Test bench method for the measurement of the separation efficiency by mass of air cleaning systems with unducted outlet
$45.00 ISO 29042-6:2010 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 6: Test bench method for the measurement of the separation efficiency by mass of air cleaning systems with ducted outlet
$45.00 ISO 29042-7:2010 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 7: Test bench method for the measurement of the pollutant concentration parameter
$45.00 ISO 29042-8:2011 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 8: Room method for the measurement of the pollutant concentration parameter
$68.00 ISO 29042-9:2011 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 9: Decontamination index
$138.00 ISO Guide 78:2012 Safety of machinery - Rules for drafting and presentation of safety standards
$49.00 JIS B 9703:2011 Safety of machinery -- Emergency stop -- Principles for design
$339.00 JIS B 9704-3:2011 Safety of machinery -- Electro-sensitive protective equipment -- Part 3: Particular requirements for Active Opto-electronic Protective Devices responsive to Diffuse Reflection (AOPDDR)
$242.00 JIS B 9705-1:2011 Safety of machinery -- Safety-related parts of control systems -- Part 1: General principles for design
$145.00 JIS B 9706-1:2009 Safety of machinery -- Indication, marking and actuation -- Part 1: Requirements for visual, acoustic and tactile signals
$58.00 JIS B 9706-2:2009 Safety of machinery -- Indication, marking and actuation -- Part 2: Requirements for marking
$58.00 JIS B 9706-3:2009 Safety of machinery -- Indication, marking and actuation -- Part 3: Requirements for the location and operation of actuators
$68.00 JIS B 9709-1:2001 Safety of machinery -- Reduction of risks to health from hazardous substances emitted by machinery -- Part 1: Principles and specifications for machinery manufacturers
$49.00 JIS B 9709-2:2001 Safety of machinery -- Reduction of risks to health from hazardous substances emitted by machinery -- Part 2: Methodology leading to verification procedures
$49.00 JIS B 9711:2002 Safety of machinery -- Minimum gaps to avoid crushing of parts of the human body
$68.00 JIS B 9713-1:2004 Safety of machinery -- Permanent means of access to machinery -- Part 1: Choice of a fixed means of access between two levels
$68.00 JIS B 9713-2:2004 Safety of machinery -- Permanent means of access to machinery -- Part 2: Working platforms and walkways
$107.00 JIS B 9713-3:2004 Safety of machinery -- Permanent means of access to machinery -- Part 3: Stairs, stepladders and guard-rails
$68.00 JIS B 9713-4:2004 Safety of machinery -- Permanent means of access to machinery -- Part 4: Fixed ladders
$145.00 JIS B 9717-1:2011 Safety of machinery -- Pressure-sensitive protective devices -- Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors
$116.00 JIS B 9960-11:2004 Safety of machinery -- Electrical equipment of machines -- Part 11: Requirements for HV equipment for voltages above 1000V a.c. or 1500V d.c. and not exceeding 36kV
$15.00 JIS B 9960-1:2008/AMENDMENT 1:2011 Safety of machinery -- Electrical equipment of machines -- Part 1: General requirements (Amendment 1)
$68.00 JIS B 9960-31:2004 Safety of machinery -- Electrical equipment of machines -- Part 31: Particular safety and EMC requirements for sewing machines, units and systems
$185.00 ISO 19085-1:2017 Woodworking machines - Safety - Part 1: Common requirements
$162.00 ISO 19085-2:2017 Woodworking machines - Safety - Part 2: Horizontal beam panel circular sawing machines
$185.00 ISO 19085-5:2017 Woodworking machines - Safety - Part 5: Dimension saws