ISO 14696:2009 - $209.00   BUY NOW

Reaction-to-fire tests - Determination of fire and thermal parameters of materials, products and assemblies using an intermediate-scale calorimeter (ICAL)

ISO 14696:2009 Publication Description:

ISO 14696:2009 provides a method for measuring the response of materials, products and assemblies exposed in vertical orientation to controlled levels of radiant heating with a piloted ignition source.

The test method is used to determine the ignitability, heat release rates, mass loss rates and visible smoke development of materials, products and assemblies under well-ventilated conditions.

The heat release rate is ascertained by measurement of the oxygen consumption as determined by the oxygen concentration and flow in the exhaust product stream. Smoke development is quantified by measuring the obscuration of light by the combustion product stream. Specimens are exposed to heating fluxes ranging from 0 kW/m2 to 50 kW/m2. Hot wires are used as the ignition source.

International Classification for Standards (ICS)

ICS Classification Field ICS Field Sub-Group and Number
ICS-13-Environment ICS Ignitability-Materials (13.220.40)
ICS-13-Environment ICS Fire Resistance-Building Materials (13.220.50)

ICS Related Standards

Cart Document Number Document Title
$68.00 ISO 10047:1993 Textiles - Determination of surface burning time of fabrics
$138.00 ISO 10093:1998 Plastics - Fire tests - Standard ignition sources
$45.00 ISO 10528:1995 Textiles - Commercial laundering procedure for textile fabrics prior to flammability testing
$162.00 ISO 10840:2008 Plastics - Guidance for the use of standard fire tests
$45.00 ISO 11907-1:1998 Plastics - Smoke generation - Determination of the corrosivity of fire effluents - Part 1: Guidance
$68.00 ISO 11907-2:1995 Plastics - Smoke generation - Determination of the corrosivity of fire effluents - Part 2: Static method
$138.00 ISO 11907-3:1998 Plastics - Smoke generation - Determination of the corrosivity of fire effluents - Part 3: Dynamic decomposition method using a travelling furnace
$138.00 ISO 11907-4:1998 Plastics - Smoke generation - Determination of the corrosivity of fire effluents - Part 4: Dynamic decomposition method using a conical radiant heater
$185.00 ISO 12136:2011 Reaction to fire tests - Measurement of material properties using a fire propagation apparatus
$68.00 ISO 12138:1996 Textiles - Domestic laundering procedures for textile fabrics prior to flammability testing
$138.00 ISO 12863:2010 Standard test method for assessing the ignition propensity of cigarettes
$19.00 ISO 12863:2010/Amd1:2016 - Amendment 1
$68.00 ISO 12952-1:2010 Textiles - Assessment of the ignitability of bedding items - Part 1: Ignition source: smouldering cigarette
$68.00 ISO 12952-2:2010 Textiles - Assessment of the ignitability of bedding items - Part 2: Ignition source: match-flame equivalent
$68.00 ISO 12992:1995 Plastics - Vertical flame spread determination for film and sheet
$45.00 ISO 13774:1998 Rubber and plastics hoses for fuels for internal-combustion engines - Method of test for flammability
$103.00 ISO 14624-1:2003 Space systems - Safety and compatibility of materials - Part 1: Determination of upward flammability of materials
$138.00 ISO 14624-2:2003 Space systems - Safety and compatibility of materials - Part 2: Determination of flammability of electrical-wire insulation and accessory materials
$68.00 ISO 14624-4:2003 Space systems - Safety and compatibility of materials - Part 4: Determination of upward flammability of materials in pressurized gaseous oxygen or oxygen-enriched environments
$103.00 ISO 14934-1:2010 Fire tests - Calibration and use of heat flux meters - Part 1: General principles
$185.00 ISO 14934-2:2013 Fire tests - Calibration and use of heat flux meters - Part 2: Primary calibration methods
$103.00 ISO 14934-3:2012 Fire tests - Calibration and use of heat flux meters - Part 3: Secondary calibration method
$138.00 ISO 14934-4:2014 Fire tests - Calibration and use of heat flux meters - Part 4: Guidance on the use of heat flux meters in fire tests
$132.00 ISO/TS 14934-4:2007 Fire tests - Calibration of heat flux meters - Part 4: Guidance on the use of heat flux meters in fire tests
$45.00 ISO 15029-1:1999 Petroleum and related products -- Determination of spray ignition characteristics of fire-resistant fluids -- Part 1: Spray flame persistence -- Hollow-cone nozzle method
$162.00 ISO/TS 15029-2:2012 Petroleum and related products - Determination of spray ignition characteristics of fire-resistant fluids - Part 2: Spray test - Stabilized flame heat release method
$185.00 ISO/TR 15655:2003 Fire resistance - Tests for thermo-physical and mechanical properties of structural materials at elevated temperatures for fire engineering design
$138.00 ISO 15791-1:2014 Plastics - Development and use of intermediate-scale fire tests for plastics products - Part 1: General guidance
$68.00 ISO/TS 16697:2012 Space systems - Safety and compatibility of materials - Method to determine the flammability thresholds of materials
$209.00 ISO/TR 17252:2008 Fire tests - Applicability of reaction to fire tests to fire modelling and fire safety engineering
$103.00 ISO/TS 17431:2006 Fire tests- Reduced-scale model box test
$138.00 ISO 17554:2014 Reaction to fire tests - Mass loss measurement
$123.00 ISO 17554:2005 Reaction to fire tests - Mass loss measurement
$162.00 ISO 21367:2007 Plastics - Reaction to fire - Test method for flame spread and combustion product release from vertically oriented specimens
$162.00 ISO 24473:2008 Fire tests - Open calorimetry - Measurement of the rate of production of heat and combustion products for fires of up to 40 MW
$162.00 ISO 25762:2009 Plastics - Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites
$68.00 ISO 30021:2013 Plastics - Burning behaviour - Intermediate-scale fire-resistance testing of fibre-reinforced polymer composites
$68.00 ISO 340:2013 Conveyor belts - Laboratory scale flammability characteristics - Requirements and test method
$68.00 ISO 3582:2000 Flexible cellular polymeric materials -- Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame
$19.00 ISO 3582/Amd1:2007 Cellular plastic and cellular rubber materials - Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame - Amendment 1
$45.00 ISO 3795:1989 Road vehicles, and tractors and machinery for agriculture and forestry -- Determination of burning behaviour of interior materials
$45.00 ISO 4589-1:1996 Plastics - Determination of burning behaviour by oxygen index - Part 1: Guidance
$138.00 ISO 4589-2:1996 Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test
$19.00 ISO 4589-2/Amd1:2005 Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test - Amendment 1
$103.00 ISO 4589-3:1996 Plastics - Determination of burning behaviour by oxygen index - Part 3: Elevated-temperature test
$103.00 ISO 4880:1997 Burning behaviour of textiles and textile products - Vocabulary
$185.00 ISO 5659-2:2012 Plastics - Smoke generation - Part 2: Determination of optical density by a single-chamber test
$45.00 ISO 6925:1982 Textile floor coverings - Burning behaviour - Tablet test at ambient temperature
$103.00 ISO 6940:2004 Textile fabrics - Burning behaviour - Determination of ease of ignition of vertically oriented specimens
$103.00 ISO 6941:2003 Textile fabrics - Burning behaviour - Measurement of flame spread properties of vertically oriented specimens
$68.00 ISO 7176-16:2012 Wheelchairs - Part 16: Resistance to ignition of postural support devices
$68.00 ISO 7822:1990 Textile glass reinforced plastics - Determination of void content - Loss on ignition, mechanical disintegration and statistical counting methods
$68.00 ISO 8030:2014 Rubber and plastics hoses - Method of test for flammability
$58.00 ISO 8030:1995 Rubber and plastics hoses - Method of test for flammability
$68.00 ISO 8191-1:1987 Furniture - Assessment of the ignitability of upholstered furniture - Part 1 : Ignition source : smouldering cigarette
$68.00 ISO 8191-2:1988 Furniture - Assessment of ignitability of upholstered furniture - Part 2 : Ignition source : match-flame equivalent
$68.00 ISO 871:2006 Plastics - Determination of ignition temperature using a hot-air furnace
$138.00 ISO 9239-1:2010 Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source
$138.00 ISO 9239-2:2002 Reaction to fire tests for floorings - Part 2: Determination of flame spread at a heat flux level of 25 kW/m2
$45.00 ISO/TR 9240:1992 Textiles - Design of apparel for reduced fire hazard
$103.00 ISO 9772:2012 Cellular plastics - Determination of horizontal burning characteristics of small specimens subjected to a small flame
$68.00 ISO 9773:1998 Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source
$19.00 ISO 9773/Amd1:2003 Plastics - Determination of burning behaviour of flexible vertical specimens in contact with a small-flame ignition source - Amendment 1: Specimens
$39.00 JIS A 1321:1994 Testing method for incombustibility of internal finish material and procedure of buildings
$29.00 JIS C 0066:2001 Flammability of solid non-metallic materials when exposed to flame sources -- List of test methods
$32.00 JIS C 60695-2-10:2004 Fire hazard testing -- Glow-wire apparatus and common test procedure
$26.00 JIS C 60695-2-11:2004 Fire hazard testing -- Glow-wire flammability test method for end-products
$58.00 JIS C 60695-2-13:2013 Fire hazard testing -- Part 2-13: Glowing/hot-wire based test methods -- Glow-wire ignition temperature (GWIT) test method for materials
$103.00 ISO 12992:2017 Plastics - Vertical flame spread determination for film and sheet
$103.00 ISO/TS 15791-2:2017 Plastics - Development and use of intermediate-scale fire tests for plastics products - Part 2: Use of intermediate-scale tests for semi-finished and finished products
$45.00 ISO 4589-1:2017 Plastics - Determination of burning behaviour by oxygen index - Part 1: General requirements
$162.00 ISO 4589-2:2017 Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test
$138.00 ISO 4589-3:2017 Plastics - Determination of burning behaviour by oxygen index - Part 3: Elevated-temperature test
$185.00 ISO 5659-2:2017 Plastics - Smoke generation - Part 2: Determination of optical density by a single-chamber test
$103.00 ISO 10294-1:1996 Fire resistance tests - Fire dampers for air distribution systems - Part 1: Test method
$19.00 ISO 10294-1:1996/Amd1:2014 - Amendment 1
$45.00 ISO 10294-2:1999 Fire resistance tests -- Fire dampers for air distribution systems -- Part 2: Classification, criteria and field of application of test results
$68.00 ISO 10294-3:1999 Fire resistance tests -- Fire dampers for air distribution systems -- Part 3: Guidance on the test method
$68.00 ISO 10294-4:2001 Fire resistance tests -- Fire dampers for air distribution systems -- Part 4: Test of thermal release mechanism
$19.00 ISO 10294-4:2001/Amd1:2014 - Amendment 1: Specific performance requirement for thermal release mechanism based upon performance of thermal release mechanism used in ISO 10294-1 test specimen
$138.00 ISO 10294-5:2005 Fire resistance tests - Fire dampers for air distribution systems - Part 5: Intumescent fire dampers
$103.00 ISO 10295-1:2007 Fire tests for building elements and components - Fire testing of service installations - Part 1: Penetration seals
$138.00 ISO 10295-2:2009 Fire tests for building elements and components - Fire testing of service installations - Part 2: Linear joint (gap) seals
$103.00 ISO/TR 10295-3:2012 Fire tests for building elements and components - Fire testing of service installations - Part 3: Single component penetration seals - Guidance on the construction and use of test configurations and simulated services to characterise sealing materials
$185.00 ISO/TR 11696-1:1999 Uses of reaction to fire test results -- Part 1: Application of test results to predict fire performance of internal linings and other building products
$162.00 ISO/TR 11696-2:1999 Uses of reaction to fire test results -- Part 2: Fire hazard assessment of construction products
$162.00 ISO 1182:2010 Reaction to fire tests for products - Non-combustibility test
$162.00 ISO/TR 11925-1:1999 Reaction to fire tests -- Ignitability of building products subjected to direct impringement of flame -- Part 1: Guidance on ignitability
$138.00 ISO 11925-2:2010 Reaction to fire tests - Ignitability of products subjected to direct impingement of flame - Part 2: Single-flame source test
$138.00 ISO 11925-3:1997 Reaction to fire tests - Ignitability of building products subjected to direct impingement of flame - Part 3: Multi-source test
$185.00 ISO 12136:2011 Reaction to fire tests - Measurement of material properties using a fire propagation apparatus
$138.00 ISO 12468-1:2013 External exposure of roofs to fire - Part 1: Test method
$45.00 ISO 12468-2:2013 External exposure of roofs to fire - Part 2: Classification of roofs
$68.00 ISO/TR 12468-3:2014 External exposure of roofs to fire - Part 3: Commentary
$209.00 ISO/TR 12471:2004 Computational structural fire design - Review of calculation models, fire tests for determining input material data and needs for further development
$68.00 ISO 12472:2003 Fire resistance of timber door assemblies - Method of determining the efficacy of intumescent seals
$138.00 ISO 12949:2011 Standard test method for measuring the heat release rate of low flammability mattresses and mattress sets
$162.00 ISO 13784-1:2014 Reaction to fire test for sandwich panel building systems - Part 1: Small room test
$103.00 ISO 13784-2:2002 Reaction-to-fire tests for sandwich panel building systems - Part 2: Test method for large rooms
$68.00 ISO 13785-1:2002 Reaction-to-fire tests for facades - Part 1: Intermediate-scale test
$103.00 ISO 13785-2:2002 Reaction-to-fire tests for facades - Part 2: Large-scale test
$45.00 ISO 14697:2007 Reaction-to-fire tests - Guidance on the choice of substrates for building and transport products
$103.00 ISO 14934-1:2010 Fire tests - Calibration and use of heat flux meters - Part 1: General principles
$185.00 ISO 14934-2:2013 Fire tests - Calibration and use of heat flux meters - Part 2: Primary calibration methods
$103.00 ISO 14934-3:2012 Fire tests - Calibration and use of heat flux meters - Part 3: Secondary calibration method
$138.00 ISO 14934-4:2014 Fire tests - Calibration and use of heat flux meters - Part 4: Guidance on the use of heat flux meters in fire tests
$132.00 ISO/TS 14934-4:2007 Fire tests - Calibration of heat flux meters - Part 4: Guidance on the use of heat flux meters in fire tests
$138.00 ISO 1716:2010 Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value)
$209.00 ISO/TR 17252:2008 Fire tests - Applicability of reaction to fire tests to fire modelling and fire safety engineering
$103.00 ISO/TS 17431:2006 Fire tests- Reduced-scale model box test
$138.00 ISO 17554:2014 Reaction to fire tests - Mass loss measurement
$123.00 ISO 17554:2005 Reaction to fire tests - Mass loss measurement
$162.00 ISO 20632:2008 Reaction-to-fire tests - Small room test for pipe insulation products or systems
$103.00 ISO/TS 22269:2005 Reaction to fire tests - Fire growth - Full-scale test for stairs and stair coverings
$209.00 ISO/TR 22898:2006 Review of outputs for fire containment tests for buildings in the context of fire safety engineering
$185.00 ISO 22899-1:2007 Determination of the resistance to jet fires of passive fire protection materials - Part 1: General requirements
$103.00 ISO/TR 22899-2:2013 Determination of the resistance to jet fires of passive fire protection - Part 2: Guidance on classification and implementation methods
$162.00 ISO 24473:2008 Fire tests - Open calorimetry - Measurement of the rate of production of heat and combustion products for fires of up to 40 MW
$185.00 ISO 3008:2007 Fire-resistance tests - Door and shutter assemblies
$138.00 ISO 3008-2:2014 Fire-resistance tests - Part 2: Lift landing door assemblies
$103.00 ISO 3008-3:2016 Fire resistance tests - Part 3: Door and shutter assemblies horizontally oriented
$138.00 ISO 3009:2003 Fire-resistance tests - Elements of building construction - Glazed elements
$138.00 ISO/TS 3814:2014 Standard tests for measuring reaction-to-fire of products and materials - Their development and application
$185.00 ISO 5657:1997 Reaction to fire tests - Ignitability of building products using a radiant heat source
$162.00 ISO/TS 5658-1:2006 Reaction to fire tests - Spread of flame - Part 1: Guidance on flame spread
$162.00 ISO 5658-2:2006 Reaction to fire tests - Spread of flame - Part 2: Lateral spread on building and transport products in vertical configuration
$19.00 ISO 5658-2/Amd1:2011 Reaction to fire tests - Spread of flame - Part 2: Lateral spread on building products in vertical configuration - Amendment 1
$185.00 ISO 5658-4:2001 Reaction to fire tests -- Spread of flame -- Part 4: Intermediate-scale test of vertical spread of flame with vertically oriented specimen
$209.00 ISO 5660-1:2015 Reaction-to-fire tests - Heat release, smoke production and mass loss rate - Part 1: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement)
$200.00 ISO 5660-1:2002 Reaction-to-fire tests - Heat release, smoke production and mass loss rate - Part 1: Heat release rate (cone calorimeter method)
$123.00 ISO 5660-2:2002 Reaction-to-fire tests - Heat release, smoke production and mass loss rate - Part 2: Smoke production rate (dynamic measurement)
$185.00 ISO/TS 5660-3:2012 Reaction-to-fire tests - Heat release, smoke production and mass loss rate - Part 3: Guidance on measurement
$162.00 ISO/TS 5660-4:2016 Reaction-to-fire tests - Heat release, smoke production and mass loss rate - Part 4: Measurement of low levels of heat release
$68.00 ISO 5925-1:2007 Fire tests - Smoke-control door and shutter assemblies - Part 1: Ambient- and medium-temperature leakage tests
$19.00 ISO 5925-1:2007/Amd1:2015 - Amendment 1
$68.00 ISO/TR 5925-2:2006 Fire tests - Smoke-control door and shutter assemblies - Part 2: Commentary on test method and the applicability of test conditions and the use of test data in a smoke containment strategy
$162.00 ISO 6944-1:2008 Fire containment - Elements of building construction - Part 1: Ventilation ducts
$19.00 ISO 6944-1:2008/Amd1:2015 - Amendment 1
$103.00 ISO 6944-2:2009 Fire containment - Elements of building construction - Part 2: Kitchen extract ducts
$138.00 ISO 834-1:1999 Fire-resistance tests -- Elements of building construction -- Part 1: General requirements
$209.00 ISO 834-10:2014 Fire resistance tests - Elements of building construction - Part 10: Specific requirements to determine the contribution of applied fire protection materials to structural steel elements
$209.00 ISO 834-11:2014 Fire resistance tests - Elements of building construction - Part 11: Specific requirements for the assessment of fire protection to structural steel elements
$68.00 ISO 834-12:2012 Fire resistance tests - Elements of building construction - Part 12: Specific requirements for separating elements evaluated on less than full scale furnaces
$19.00 ISO 834-1/Amd1:2012 Fire-resistance tests - Elements of building construction - Part 1: General requirements - Amendment 1
$103.00 ISO/TR 834-2:2009 Fire-resistance tests - Elements of building construction - Part 2: Guidance on measuring uniformity of furnace exposure on test samples
$138.00 ISO/TR 834-3:2012 Fire-resistance tests - Elements of building construction - Part 3: Commentary on test method and guide to the application of the outputs from the fire-resistance test
$68.00 ISO 834-4:2000 Fire-resistance tests -- Elements of building construction -- Part 4: Specific requirements for loadbearing vertical separating elements
$68.00 ISO 834-5:2000 Fire-resistance tests -- Elements of building construction -- Part 5: Specific requirements for loadbearing horizontal separating elements
$68.00 ISO 834-6:2000 Fire-resistance tests -- Elements of building construction -- Part 6: Specific requirements for beams
$68.00 ISO 834-7:2000 Fire-resistance tests -- Elements of building construction -- Part 7: Specific requirements for columns
$68.00 ISO 834-8:2002 Fire-resistance tests - Elements of building construction - Part 8: Specific requirements for non-loadbearing vertical separating elements
$68.00 ISO 834-9:2003 Fire-resistance tests - Elements of building construction - Part 9: Specific requirements for non-loadbearing ceiling elements
$173.00 ISO 9705:1993 Fire tests - Full-scale room test for surface products
$185.00 ISO 9705-1:2016 Reaction to fire tests - Room corner test for wall and ceiling lining products - Part 1: Test method for a small room configuration
$185.00 ISO/TR 9705-2:2001 Reaction-to-fire tests -- Full-scale room tests for surface products -- Part 2: Technical background and guidance
$138.00 ISO 3008-2:2017 Fire-resistance tests - Part 2: Lift landing door assemblies