ISO/TR 14685:2001 - $185.00   BUY NOW

Hydrometric determinations - Geophysical logging of boreholes for hydrogeological purposes - Considerations and guidelines for making measurements

ISO/TR 14685:2001 Publication Description:

This Technical Report is a summary of best practice for those involved in geophysical borehole logging for hydrogeological purposes. It describes the factors that need to be considered and the measurements that are required to be made when logging boreholes. There can, however, be no definite "standard" logging procedure because of great diversity of objectives, ground-water conditions and available technology. Geophysical logging of boreholes is an evolving science, continually adopting new and different techniques. Every application poses a range of problems and is likely to require a particular set of logs to gain maximum information. This Technical Report therefore provides information on field practice with the objective of how variations in measured parameters may be useful to take account of particular local conditions. It deals with the usual types of logging carried out for delineation of aquifer boundaries; mapping aquifer geometry; assessing the chemical quality and quantity of ground water; water-supply purposes; landfill investigations and contamination studies; borehole construction and conditions; and subsurface lithological information.

Applications not specifically considered in this Technical Report include mineral and hydrocarbon evaluation and geotechnical and structural engineering investigations. However, this Technical Report may be a source of general information for any borehole geophysical logging effort.

NOTE Interpretation of the data collected during logging is referred to in this Technical Report only in a general way. For full details of the analysis and interpretation of geophysical logs, reference should be made to specialized texts. Examples of such texts are included in the Bibliography.

International Classification for Standards (ICS)

ICS Classification Field ICS Field Sub-Group and Number
ICS-07-Mathematics ICS Geology Meteorology Hydrology (07.060)

ICS Related Standards

Cart Document Number Document Title
$162.00 ISO/TR 13973:2014 Artificial recharge to groundwater
$209.00 ISO 14686:2003 Hydrometric determinations - Pumping tests for water wells - Considerations and guidelines for design, performance and use
$138.00 ISO 15927-1:2003 Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 1: Monthly means of single meteorological elements
$68.00 ISO 15927-2:2009 Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 2: Hourly data for design cooling load
$103.00 ISO 15927-3:2009 Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 3: Calculation of a driving rain index for vertical surfaces from hourly wind and rain data
$45.00 ISO 15927-4:2005 Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 4: Hourly data for assessing the annual energy use for heating and cooling
$45.00 ISO 15927-5:2004 Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 5: Data for design heat load for space heating
$19.00 ISO 15927-5/Amd1:2011 Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 5: Data for design heat load for space heating - Amendment 1
$103.00 ISO 15927-6:2007 Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 6: Accumulated temperature differences (degree-days)
$103.00 ISO 16457:2014 Space systems - Space environment (natural and artificial) - The Earths ionosphere model: international reference ionosphere (IRI) model and extensions to the plasmasphere
$138.00 ISO 16622:2002 Meteorology - Sonic anemometers/thermometers - Acceptance test methods for mean wind measurements
$103.00 ISO 17713-1:2007 Meteorology - Wind measurements - Part 1: Wind tunnel test methods for rotating anemometer performance
$138.00 ISO 17714:2007 Meteorology - Air temperature measurements - Test methods for comparing the performance of thermometer shields/screens and defining important characteristics
$103.00 ISO 19289:2015 Air quality - Meteorology - Siting classifications for surface observing stations on land
$162.00 ISO 21413:2005 Manual methods for the measurement of a groundwater level in a well
$209.00 ISO/TR 21414:2016 Hydrometry - Groundwater - Surface geophysical surveys for hydrogeological purposes
$209.00 ISO/TR 23211:2009 Hydrometry - Measuring the water level in a well using automated pressure transducer methods
$232.00 ISO 2533:1975 Standard Atmosphere
$209.00 ISO 2533/ADD1:1985 Addendum 1 to ISO 2533:1975 Hypsometrical tables
$232.00 ISO 2533/ADD2:1997 ADDENDUM 2 to ISO 2533:1975 Extension to - 5000 m and standard atmosphere as a function of altitude in feet
$162.00 ISO 28902-1:2012 Air quality - Environmental meteorology - Part 1: Ground-based remote sensing of visual range by lidar
$45.00 ISO 710-1:1974 Graphical symbols for use on detailed maps, plans and geological cross-sections -- Part 1: General rules of representation
$68.00 ISO 710-2:1974 Graphical symbols for use on detailed maps, plans and geological cross-sections -- Part 2: Representation of sedimentary rocks
$45.00 ISO 710-3:1974 Graphical symbols for use on detailed maps, plans and geological cross-sections -- Part 3: Representation of magmatic rocks
$45.00 ISO 710-4:1982 Graphical symbols for use on detailed maps, plans and geological cross-sections -- Part 4 : Representation of metamorphic rocks
$45.00 ISO 710-5:1989 Graphical symbols for use on detailed maps, plans and geological cross-sections -- Part 5: Representation of minerals
$45.00 ISO 710-6:1984 Graphical symbols for use on detailed maps, plans and geological cross-sections -- Part 6 : Representation of contact rocks and rocks which have undergone metasomatic, pneumatolytic or hydrothermal transformation or transformation by weathering
$68.00 ISO 710-7:1984 Graphical symbols for use on detailed maps, plans and geological cross-sections -- Part 7 : Tectonic symbols
$138.00 ISO 17717:2017 Meteorological balloons - Specification
$185.00 ISO 28902-2:2017 Air quality - Environmental meteorology - Part 2: Ground-based remote sensing of wind by heterodyne pulsed Doppler lidar