ISO 12176-4:2003 - $138.00   BUY NOW

Plastics pipes and fittings - Equipment for fusion jointing polyethylene systems - Part 4: Traceability coding

ISO 12176-4:2003 Publication Description:

ISO 12176-4:2003 specifies an encoding system for data on components, assembly methods and jointing operations for polyethylene (PE) piping systems for gas supply, for use in a traceability system.

Reading of the codes can be carried out using alphanumeric or numeric data-recognition systems such as bar-code, magnetic-stripe card or microchip card readers.

This part of ISO 12176 is applicable to PE pipes, fittings and valves conforming to ISO standards for gas supply piping systems and also to the assembly operation utilizing methods such as fusion using a heating tool (butt, socket and saddle fusion), electrofusion (socket and saddle fusion), induction fusion and mechanical jointing.

International Classification for Standards (ICS)

ICS Classification Field ICS Field Sub-Group and Number
ICS-23-Fluid ICS Plastics Pipes (23.040.20)
ICS-23-Fluid ICS Plastics Fittings (23.040.45)
ICS-75-Petroleum ICS Petroleum Industry Handling Equipment (75.200)

ICS Related Standards

Cart Document Number Document Title
$45.00 ISO 10146:1997 Crosslinked polyethylene (PE-X) pipes -- Effect of time and temperature on the expected strength
$45.00 ISO 10147:2011 Pipes and fittings made of crosslinked polyethylene (PE-X) - Estimation of the degree of crosslinking by determination of the gel content
$185.00 ISO/TR 10358:1993 Plastics pipes and fittings -- Combined chemical-resistance classification table
$45.00 ISO 10466:1997 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Test method to prove the resistance to initial ring deflection
$209.00 ISO 10467:2004 Plastics piping systems for pressure and non-pressure drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
$19.00 ISO 10467/Amd1:2012 Plastics piping systems for pressure and non-pressure drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin - Amendment 1
$68.00 ISO 10468:2003 Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the long-term specific ring creep stiffness under wet conditions and calculation of the wet creep factor
$19.00 ISO 10468/Amd1:2010 Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the long-term specific ring creep stiffness under wet conditions and calculation of the wet creep factor - Amendment 1
$68.00 ISO 10471:2003 Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the long-term ultimate bending strain and the long-term ultimate relative ring deflection under wet conditions
$19.00 ISO 10471/Amd1:2010 Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the long-term ultimate bending strain and the long-term ultimate relative ring deflection under wet conditions - Amendment 1
$45.00 ISO/TR 10501:1993 Thermoplastics pipes for the transport of liquids under pressure -- Calculation of head losses
$68.00 ISO 10508:2006 Plastics piping systems for hot and cold water installations - Guidance for classification and design
$209.00 ISO 10639:2004 Plastics piping systems for pressure and non-pressure water supply - Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
$19.00 ISO 10639/Amd1:2011 Plastics piping systems for pressure and non-pressure water supply - Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin - Amendment 1
$185.00 ISO 10928:2016 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Methods for regression analysis and their use
$240.00 ISO 10928:2009 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Methods for regression analysis and their use
$22.00 ISO 10928:2009/Amd1:2013 - Amendment 1
$68.00 ISO 10952:2014 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Determination of the resistance to chemical attack for the inside of a section in a deflected condition
$45.00 ISO 11173:1994 Thermoplastics pipes -- Determination of resistance to external blows -- Staircase method
$103.00 ISO 11296-1:2009 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 1: General
$138.00 ISO 11296-3:2009 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 3: Lining with close-fit pipes
$162.00 ISO 11296-4:2009 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes
$103.00 ISO 11296-7:2011 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 7: Lining with spirally-wound pipes
$103.00 ISO 11297-1:2013 Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 1: General
$103.00 ISO 11297-3:2013 Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 3: Lining with close-fit pipes
$103.00 ISO 11298-1:2010 Plastics piping systems for renovation of underground water supply networks - Part 1: General
$103.00 ISO 11298-3:2010 Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close-fit pipes
$103.00 ISO 11299-1:2011 Plastics piping systems for renovation of underground gas supply networks - Part 1: General
$103.00 ISO 11299-3:2011 Plastics piping systems for renovation of underground gas supply networks - Part 3: Lining with close-fit pipes
$68.00 ISO/TS 11619:2014 Polyurethane tubing for use primarily in pneumatic installations - Dimensions and specification
$68.00 ISO 1167-1:2006 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 1: General method
$45.00 ISO 1167-2:2006 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 2: Preparation of pipe test pieces
$103.00 ISO 11673:2005 Unplasticized poly(vinyl chloride) (PVC-U) pressure pipes - Determination of the fracture toughness properties
$68.00 ISO 1167-3:2007 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 3: Preparation of components
$45.00 ISO 1167-4:2007 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 4: Preparation of assemblies
$103.00 ISO 11922-1:1997 Thermoplastics pipes for the conveyance of fluids -- Dimensions and tolerances -- Part 1: Metric series
$103.00 ISO 11922-2:1997 Thermoplastics pipes for the conveyance of fluids -- Dimensions and tolerances -- Part 2: Inch-based series
$45.00 ISO 12091:1995 Structured-wall thermoplastics pipes -- Oven test
$68.00 ISO 12162:2009 Thermoplastics materials for pipes and fittings for pressure applications - Classification, designation and design coefficient
$138.00 ISO 12176-1:2012 Plastics pipes and fittings - Equipment for fusion jointing polyethylene systems - Part 1: Butt fusion
$138.00 ISO 12176-2:2008 Plastics pipes and fittings - Equipment for fusion jointing polyethylene systems - Part 2: Electrofusion
$68.00 ISO 12176-3:2011 Plastics pipes and fittings - Equipment for fusion jointing polyethylene systems - Part 3: Operators badge
$68.00 ISO 12230:2012 Polybutene-1 (PB-1) pipes - Effect of time and temperature on the expected strength
$45.00 ISO 13229:2010 Thermoplastics piping systems for non-pressure applications - Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings - Determination of the viscosity number and K-value
$45.00 ISO 13254:2010 Thermoplastics piping systems for non-pressure applications - Test method for watertightness
$45.00 ISO 13255:2010 Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for airtightness of joints
$68.00 ISO 13257:2010 Thermoplastics piping systems for non-pressure applications - Test method for resistance to elevated temperature cycling
$68.00 ISO 13259:2010 Thermoplastics piping systems for underground non-pressure applications - Test method for leaktightness of elastomeric sealing ring type joints
$68.00 ISO 13260:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading
$45.00 ISO 13262:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam
$45.00 ISO 13263:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for impact strength
$45.00 ISO 13264:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for mechanical strength or flexibility of fabricated fittings
$103.00 ISO 13265:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Joints for buried non-pressure applications - Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure
$45.00 ISO 13266:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of resistance against surface and traffic loading
$68.00 ISO 13267:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics inspection chamber and manhole bases - Test methods for buckling resistance
$68.00 ISO 13268:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of ring stiffness
$138.00 ISO 13272:2011 Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP), polypropylene with mineral modifiers (PP-MD) and polyethylene (PE) - Specifications for manholes and inspection chambers in traffic areas and underground installations
$103.00 ISO 13477:2008 Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Small-scale steady-state test (S4 test)
$103.00 ISO 13478:2007 Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Full-scale test (FST)
$68.00 ISO 13479:2009 Polyolefin pipes for the conveyance of fluids - Determination of resistance to crack propagation - Test method for slow crack growth on notched pipes
$68.00 ISO 13480:1997 Polyethylene pipes -- Resistance to slow crack growth -- Cone test method
$45.00 ISO 13760:1998 Plastics pipes for the conveyance of fluids under pressure -- Miners rule -- Calculation method for cumulative damage'
$45.00 ISO 13761:1996 Plastics pipes and fittings -- Pressure reduction factors for polyethylene pipeline systems for use at temperatures above 20 degrees C
$45.00 ISO 13844:2015 Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with plastic pressure pipes - Test method for leaktightness under negative pressure, angular deflection and deformation
$45.00 ISO 13845:2015 Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with thermoplastic pressure pipes - Test method for leaktightness under internal pressure and with angular deflection
$209.00 ISO 13950:2007 Plastics pipes and fittings - Automatic recognition systems for electrofusion joints
$45.00 ISO 13966:1998 Thermoplastics pipes and fittings -- Nominal ring stiffnesses
$45.00 ISO 13968:2008 Plastics piping and ducting systems - Thermoplastics pipes - Determination of ring flexibility
$68.00 ISO 1452-1:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: General
$138.00 ISO 1452-2:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Pipes
$185.00 ISO 1452-3:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 3: Fittings
$68.00 ISO 1452-4:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 4: Valves
$103.00 ISO 1452-5:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 5: Fitness for purpose of the system
$138.00 ISO 14531-1:2002 Plastics pipes and fittings - Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels - Metric series Specifications - Part 1: Pipes
$162.00 ISO 14531-2:2004 Plastics pipes and fittings - Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels - Metric series - Specifications - Part 2: Fittings for heat-fusion jointing
$138.00 ISO 14531-3:2010 Plastics pipes and fittings - Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels - Metric series - Specifications - Part 3: Fittings for mechanical jointing (including PE-X/metal transitions)
$103.00 ISO 14531-4:2006 Plastics pipes and fittings - Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels - Metric series - Specifications - Part 4: System design and installation guidelines
$88.00 ISO 14828:2003 Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the long-term specific ring relaxation stiffness under wet conditions and calculation of the wet relaxation factor
$22.00 ISO 14828/Amd1:2010 Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the long-term specific ring relaxation stiffness under wet conditions and calculation of the wet relaxation factor - Amendment 1
$45.00 ISO 15306:2003 Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the resistance to cyclic internal pressure
$19.00 ISO 15306/Amd1:2012 Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the resistance to cyclic internal pressure - Amendment 1
$68.00 ISO 15874-1:2013 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1: General
$103.00 ISO 15874-2:2013 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes
$68.00 ISO 15874-5:2013 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 5: Fitness for purpose of the system
$68.00 ISO 15875-2:2003 Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 2: Pipes
$19.00 ISO 15875-2/Amd1:2007 Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 2: Pipes - Amendment 1
$68.00 ISO 15875-5:2003 Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 5: Fitness for purpose of the system
$68.00 ISO/TS 15875-7:2003 Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 7: Guidance for the assessment of conformity
$103.00 ISO 15876-2:2017 Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 2: Pipes
$88.00 ISO 15876-2:2003 Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 2: Pipes
$22.00 ISO 15876-2/Amd1:2007 Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 2: Pipes - Amendment 1
$68.00 ISO 15876-5:2017 Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 5: Fitness for purpose of the system
$88.00 ISO 15876-5:2003 Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 5: Fitness for purpose of the system
$68.00 ISO/TS 15876-7:2003 Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 7: Guidance for the assessment of conformity
$68.00 ISO 15877-1:2009 Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: General
$19.00 ISO 15877-1/Amd1:2010 Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: General - Amendment 1
$103.00 ISO 15877-2:2009 Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Pipes
$19.00 ISO 15877-2/Amd1:2010 Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Pipes - Amendment 1
$68.00 ISO 15877-5:2009 Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 5: Fitness for purpose of the system
$19.00 ISO 15877-5/Amd1:2010 Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 5: Fitness for purpose of the system - Amendment 1
$103.00 ISO/TS 15877-7:2009 Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 7: Guidance for the assessment of conformity
$45.00 ISO 161-1:1996 Thermoplastics pipes for the conveyance of fluids -- Nominal outside diameters and nominal pressures -- Part 1: Metric series
$45.00 ISO 161-2:1996 Thermoplastic pipes for the conveyance of fluids -- Nominal outside diameters and nominal pressures -- Part 2: Inch-based series
$103.00 ISO 16241:2005 Notch tensile test to measure the resistance to slow crack growth of polyethylene materials for pipe and fitting products (PENT)
$138.00 ISO 16422:2014 Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure - Specifications
$138.00 ISO/TS 16479:2012 Thermoplastics pipes for the conveyance of fluids - Determination of the slow cracking resistance of pipes and fittings using the Notched Ring Test (NRT)
$68.00 ISO 16871:2003 Plastics piping and ducting systems - Plastics pipes and fittings - Method for exposure to direct (natural) weathering
$45.00 ISO/TR 16913:1999 Plastics pipes and fittings -- Definitions of types of test
$45.00 ISO 17454:2006 Plastics piping systems - Multilayer pipes - Test method for the adhesion of the different layers using a pulling rig
$68.00 ISO 17455:2005 Plastics piping systems - Multilayer pipes - Determination of the oxygen permeability of the barrier pipe
$68.00 ISO 17456:2006 Plastics piping systems - Multilayer pipes - Determination of long-term strength
$138.00 ISO 17467-1:2012 Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems jointed by solvent cement - Part 1: General
$68.00 ISO 17467-2:2012 Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems jointed by solvent cement - Part 2: Pipes
$45.00 ISO 17467-3:2012 Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems jointed by solvent cement - Part 3: Fittings
$162.00 ISO 17484-1:2014 Plastics piping systems - Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) - Part 1: Specifications for systems
$68.00 ISO 17484-2:2009 Plastics piping systems - Multilayer pipe systems for indoor gas installations - Part 2: Code of pratice
$45.00 ISO 17778:2015 Plastics piping systems - Fittings, valves and ancillaries - Determination of gaseous flow rate/pressure drop relationships
$103.00 ISO/TS 17902:2016 Wrapped electrofoaming joints for polyethylene (PE) piping systems with smooth outer wall for gravity drains and sewers
$45.00 ISO/TR 18124:2006 Plastics piping systems - Multilayer M (metal) pipes - Test method for strength of the weld line in the metal layer and bonding between layers by use of a cone
$103.00 ISO 18225:2012 Plastics piping systems - Multilayer piping systems for outdoor gas installations - Specifications for systems
$185.00 ISO/TS 18226:2006 Plastics pipes and fittings - Reinforced thermoplastics pipe systems for the supply of gaseous fuels for pressures up to 4 MPa (40 bar)
$68.00 ISO 18373-1:2007 Rigid PVC pipes - Differential scanning calorimetry (DSC) method - Part 1: Measurement of the processing temperature
$68.00 ISO 18373-2:2008 Rigid PVC pipes - Differential scanning calorimetry (DSC) method - Part 2: Measurement of the enthalpy of fusion of crystallites
$68.00 ISO 18488:2015 Polyethylene (PE) materials for piping systems - Determination of Strain Hardening Modulus in relation to slow crack growth - Test method
$68.00 ISO 18489:2015 Polyethylene (PE) materials for piping systems - Determination of resistance to slow crack growth under cyclic loading - Cracked Round Bar test method
$68.00 ISO 18553:2002 Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds
$19.00 ISO 18553/Amd1:2007 Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds - Amendment 1
$209.00 ISO 18672-1:2009 Plastics piping systems for non-pressure drainage and sewerage - Polyester resin concrete (PRC) - Part 1: Pipes and fittings with flexible joints
$68.00 ISO 18851:2015 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test method to prove the structural design of fittings
$162.00 ISO 19220:2004 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Styrene copolymer blends (SAN + PVC)
$103.00 ISO/TR 19480:2005 Polyethylene pipes and fittings for the supply of gaseous fuels or water - Training and assessment of fusion operators
$68.00 ISO 19893:2011 Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling
$68.00 ISO 19899:2010 Plastics piping systems - Polyolefin pipes and mechanical fitting assemblies - Test method for the resistance to end load (AREL test)
$103.00 ISO 21003-2:2008 Multilayer piping systems for hot and cold water installations inside buildings - Part 2: Pipes
$19.00 ISO 21003-2/Amd1:2011 Multilayer piping systems for hot and cold water installations inside buildings - Part 2: Pipes - Amendment 1
$103.00 ISO/TS 21003-7:2008 Multilayer piping systems for hot and cold water installations inside buildings - Part 7: Guidance for the assessment of conformity
$19.00 ISO/TS 21003-7/Amd1:2010 Multilayer piping systems for hot and cold water installations inside buildings - Part 7: Guidance for the assessment of conformity - Anendment 1
$138.00 ISO 21004:2006 Plastics piping systems - Multilayer pipes and their joints, based on thermoplastics, for water supply
$103.00 ISO 21138-1:2007 Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: Material specifications and performance criteria for pipes, fittings and system
$185.00 ISO 21138-2:2007 Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Pipes and fittings with smooth external surface, Type A
$185.00 ISO 21138-3:2007 Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 3: Pipes and fittings with non-smooth external surface, Type B
$68.00 ISO 21307:2011 Plastics pipes and fittings - Butt fusion jointing procedures for polyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems
$68.00 ISO 21751:2011 Plastics pipes and fittings - Decohesion test of electrofusion assemblies - Strip-bend test
$103.00 ISO 22391-2:2009 Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 2: Pipes
$68.00 ISO 23228:2011 Thermoplastics pipes for the conveyance of fluids - Determination of the stress-rupture resistance of moulding materials using plain strain grooved tensile (PSGT) specimens
$68.00 ISO 24033:2009 Polyethylene of raised temperature resistance (PE-RT) pipes - Effect of time and temperature on the expected strength
$45.00 ISO 2505:2005 Thermoplastics pipes - Longitudinal reversion - Test method and parameters
$45.00 ISO 2507-1:1995 Thermoplastics pipes and fittings -- Vicat softening temperature -- Part 1: General test method
$45.00 ISO 2507-2:1995 Thermoplastics pipes and fittings -- Vicat softening temperature -- Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly(vinyl chloride) (PVC-HI) pipes
$45.00 ISO 2507-3:1995 Thermoplastics pipes and fittings -- Vicat softening temperature -- Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings
$209.00 ISO 25780:2011 Plastics piping systems for pressure and non-pressure water supply, irrigation, drainage or sewerage - Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin - Pipes with flexible joints intended to be installed using jacking techniques
$138.00 ISO 265-1:1988 Pipes and fittings of plastics materials - Fittings for domestic and industrial waste pipes - Basic dimensions : Metric series - Part 1: Unplasticized poly(vinyl chloride) (PVC-U)
$45.00 ISO/TS 26873:2010 Plastics pipes and fittings - Definition and construction procedures for reference lines
$45.00 ISO/TR 27165:2012 Thermoplastics piping systems - Guidance for definitions of wall constructions for pipes
$45.00 ISO 3114:1977 Unplasticized polyvinyl chloride (PVC) pipes for potable water supply - Extractability of lead and tin - Test method
$138.00 ISO 3126:2005 Plastics piping systems - Plastics components - Determination of dimensions
$68.00 ISO 3127:1994 Thermoplastics pipes -- Determination of resistance to external blows -- Round-the-clock method
$103.00 ISO 3213:2009 Polypropylene (PP) pipes - Effect of time and temperature on the expected strength
$45.00 ISO 3514:1976 Chlorinated polyvinyl chloride (CPVC) pipes and fittings -- Specification and determination of density
$162.00 ISO 3633:2002 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U)
$45.00 ISO 4059:1978 Polyethylene (PE) pipes -- Pressure drop in mechanical pipe-jointing systems -- Method of test and requirements
$68.00 ISO 4065:1996 Thermoplastics pipes -- Universal wall thickness table
$185.00 ISO/TR 4191:2014 Plastics piping systems for water supply - Unplasticized poly(vinyl chloride)(PVC-U) and oriented PVC-U (PVC-O) - Guidance for installation
$103.00 ISO 4427-1:2007 Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - Part 1: General
$19.00 ISO 4427-1:2007/Amd1:2015 - Amendment 1: Melt mass-flow rate (MFR) for PE 80 and PE 100
$103.00 ISO 4427-2:2007 Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - Part 2: Pipes
$19.00 ISO 4427-2:2007/Amd1:2014 - Amendment 1
$68.00 ISO 4427-5:2007 Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - Part 5: Fitness for purpose of the system
$103.00 ISO 4433-1:1997 Thermoplastics pipes -- Resistance to liquid chemicals -- Classification -- Part 1: Immersion test method
$103.00 ISO 4433-2:1997 Thermoplastics pipes -- Resistance to liquid chemicals -- Classification -- Part 2: Polyolefin pipes
$68.00 ISO 4433-3:1997 Thermoplastics pipes -- Resistance to liquid chemicals -- Classification -- Part 3: Unplasticized poly(vinyl chloride) (PVC-U), high-impact poly(vinyl chloride) (PVC-HI) and chlorinated poly(vinyl chloride) (PVC-C) pipes
$68.00 ISO 4433-4:1997 Thermoplastics pipes -- Resistance to liquid chemicals -- Classification -- Part 4: Poly(vinylidene fluoride) (PVDF) pipes
$138.00 ISO 4435:2003 Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U)
$45.00 ISO 4439:1979 Unplasticized polyvinyl chloride (PVC) pipes and fittings -- Determination and specification of density
$68.00 ISO 6259-1:2015 Thermoplastics pipes - Determination of tensile properties - Part 1: General test method
$88.00 ISO 6259-1:1997 Thermoplastics pipes -- Determination of tensile properties -- Part 1: General test method
$68.00 ISO 6259-2:1997 Thermoplastics pipes -- Determination of tensile properties -- Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) and high-impact poly(vinyl chloride) (PVC-HI)
$68.00 ISO 6259-3:2015 Thermoplastics pipes - Determination of tensile properties - Part 3: Polyolefin pipes
$88.00 ISO 6259-3:1997 Thermoplastics pipes -- Determination of tensile properties -- Part 3: Polyolefin pipes
$45.00 ISO 6964:1986 Polyolefin pipes and fittings -- Determination of carbon black content by calcination and pyrolysis -- Test method and basic specification
$185.00 ISO/TS 7024:2005 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Thermoplastics - Recommended practice for installation
$138.00 ISO/TR 7074:1986 Performance requirements for plastics pipes and fittings for use in underground drainage and sewage
$45.00 ISO 7245:1984 Pipes and fittings of acrylonitrile/butadiene/styrene (ABS) -- General specification for moulding and extrusion materials
$45.00 ISO 7246:1984 Pipes and fittings of acrylonitrile/styrene/acrylester (ASA) -- General specification for moulding and extrusion materials
$68.00 ISO 7432:2002 Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods to prove the design of locked socket-and-spigot joints, including double-socket joints, with elastomeric seals
$68.00 ISO 7509:2015 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of time to failure under sustained internal pressure
$51.00 ISO 7509:2000 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of time to failure under sustained internal pressure
$45.00 ISO 7510:1997 Plastics piping systems -- Glass-reinforced plastics (GRP) components -- Determination of the amounts of constituents using the gravimetric method
$45.00 ISO 7511:1999 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods to prove the leaktightness of the wall under short-term internal pressure
$138.00 ISO 7671:2003 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Polypropylene (PP)
$162.00 ISO 7675:2003 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Chlorinated poly(vinyl chloride) (PVC-C)
$162.00 ISO 7682:2003 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Acrylonitrile-butadiene-styrene (ABS)
$68.00 ISO 7684:1997 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the creep factor under dry conditions
$68.00 ISO 7685:1998 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of initial specific ring stiffness
$45.00 ISO 7686:2005 Plastics pipes and fittings - Determination of opacity
$68.00 ISO 8283-1:1991 Plastics pipes and fittings - Dimensions of sockets and spigots for discharge systems inside buildings - Part 1: Unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C)
$45.00 ISO 8283-2:1992 Plastics pipes and fittings - Dimensions of sockets and spigots for discharge systems inside buildings - Part 2: Polyethylene (PE)
$45.00 ISO 8283-3:1992 Plastics pipes and fittings - Dimensions of sockets and spigots for discharge systems inside buildings - Part 3: Polypropylene (PP)
$68.00 ISO 8283-4:1992 Plastics pipes and fittings - Dimensions of sockets and spigots for discharge systems inside buildings - Part 4: Acrylonitrile/butadiene/styrene (ABS)
$45.00 ISO 8361-1:1991 Thermoplastics pipes and fittings -- Water absorption -- Part 1: General test method
$45.00 ISO 8361-2:1991 Thermoplastics pipes and fittings -- Water absorption -- Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings
$45.00 ISO 8361-3:1991 Thermoplastics pipes and fittings -- Water absorption -- Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) pipes and fittings
$68.00 ISO 8483:2003 Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods to prove the design of bolted flange joints
$19.00 ISO 8483/Amd1:2012 Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods to prove the design of bolted flange joints - Amendment 1
$68.00 ISO 8513:2016 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Test methods for the determination of the initial longitudinal tensile strength
$123.00 ISO 8513:2014 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Test methods for the determination of the apparent initial longitudinal tensile strength
$103.00 ISO 8521:2009 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Test methods for the determination of the apparent initial circumferential tensile strength
$68.00 ISO 8533:2003 Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods to prove the design of cemented or wrapped joints
$19.00 ISO 8533/Amd1:2012 Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods to prove the design of cemented or wrapped joints - Amendment 1
$138.00 ISO 8770:2003 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Polyethylene (PE)
$138.00 ISO 8772:2006 Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE)
$138.00 ISO 8773:2006 Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP)
$103.00 ISO 8779:2010 Plastics piping systems - Polyethylene (PE) pipes for irrigation - Specifications
$19.00 ISO 8779:2010/Amd1:2014 - Amendment 1
$103.00 ISO 8795:2001 Plastics piping systems for the transport of water intended for human consumption -- Migration assessment -- Determination of migration values of plastics pipes and fittings and their joints
$45.00 ISO 8796:2004 Polyethylene PE 32 and PE 40 pipes for irrigation laterals - Susceptibility to environmental stress cracking induced by insert-type fittings - Test method and requirements
$162.00 ISO 9080:2012 Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
$45.00 ISO 9852:2007 Unplasticized poly(vinyl chloride) (PVC-U) pipes - Dichloromethane resistance at specified temperature (DCMT) - Test method
$45.00 ISO 9854-1:1994 Thermoplastics pipes for the transport of fluids -- Determination of pendulum impact strength by the Charpy method -- Part 1: General test method
$45.00 ISO 9854-2:1994 Thermoplastics pipes for the transport of fluids -- Determination of pendulum impact strength by the Charpy method -- Part 2: Test conditions for pipes of various materials
$162.00 ISO 9896:1996 Plastics traps for discharge pipework systems inside buildings
$68.00 ISO 9967:2016 Thermoplastics pipes - Determination of creep ratio
$88.00 ISO 9967:2007 Thermoplastics pipes - Determination of creep ratio
$68.00 ISO 9969:2016 Thermoplastics pipes - Determination of ring stiffness
$88.00 ISO 9969:2007 Thermoplastics pipes - Determination of ring stiffness
$107.00 JIS K 6741:2016 Unplasticized poly(vinyl chloride) (PVC-U) pipes
$107.00 JIS K 6741:2007 Unplasticized poly (vinyl chloride) (PVC-U) pipes
$107.00 JIS K 6762:2012 Double wall polyethylene pipes for water supply
$78.00 JIS K 6776:2016 Chlorinated poly(vinyl chloride) (PVC-C) pipes for hot and cold water supply
$87.00 JIS K 6776:2007 Chlorinated poly (vinyl chloride) (PVC-C) pipes for hot and cold water supply
$68.00 JIS K 6787:2004 Crosslinked polyethylene (PE-X) pipes for water supply
$10.00 JIS K 6787:2004/AMENDMENT 2:2013 Crosslinked polyethylene (PE-X) pipes for water supply (Amendment 2)
$49.00 JIS K 7032:2002 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of initial specific ring stiffness
$138.00 ISO 12176-1:2017 Plastics pipes and fittings - Equipment for fusion jointing polyethylene systems - Part 1: Butt fusion
$138.00 ISO/TS 12512:2017 Glass reinforced thermosetting plastic (GRP) pipes - Determination of initial specific ring stiffness using segment test species cut from a pipe
$19.00 ISO 13260:2010/Amd1:2017 - Amendment 1
$45.00 ISO 13761:2017 Plastics pipes and fittings - Pressure reduction factors for polyethylene pipeline systems for use at temperatures above 20 degrees C
$138.00 ISO 16611:2017 Plastics piping systems for drainage and sewerage without pressure - Non-circular pipes and joints made of glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resins (UP) - Dimensions, requirements and tests
$138.00 ISO/TS 20656-1:2017 Plastics piping systems - General rules for structural design of glass-reinforced thermosetting plastics (GRP) pipes - Part 1: Buried pipes
$45.00 ISO 7510:2017 Plastics piping systems - Glass-reinforced plastics (GRP) components - Determination of the amounts of constituents
$209.00 ISO 10639:2017 Plastics piping systems for pressure and non-pressure water supply - Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
$45.00 ISO 10147:2011 Pipes and fittings made of crosslinked polyethylene (PE-X) - Estimation of the degree of crosslinking by determination of the gel content
$185.00 ISO/TR 10358:1993 Plastics pipes and fittings -- Combined chemical-resistance classification table
$68.00 ISO 10508:2006 Plastics piping systems for hot and cold water installations - Guidance for classification and design
$185.00 ISO 10928:2016 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Methods for regression analysis and their use
$240.00 ISO 10928:2009 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Methods for regression analysis and their use
$22.00 ISO 10928:2009/Amd1:2013 - Amendment 1
$68.00 ISO 10952:2014 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Determination of the resistance to chemical attack for the inside of a section in a deflected condition
$103.00 ISO 11296-1:2009 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 1: General
$138.00 ISO 11296-3:2009 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 3: Lining with close-fit pipes
$162.00 ISO 11296-4:2009 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes
$103.00 ISO 11296-7:2011 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 7: Lining with spirally-wound pipes
$103.00 ISO 11297-1:2013 Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 1: General
$103.00 ISO 11297-3:2013 Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 3: Lining with close-fit pipes
$103.00 ISO 11298-1:2010 Plastics piping systems for renovation of underground water supply networks - Part 1: General
$103.00 ISO 11298-3:2010 Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close-fit pipes
$103.00 ISO 11299-1:2011 Plastics piping systems for renovation of underground gas supply networks - Part 1: General
$103.00 ISO 11299-3:2011 Plastics piping systems for renovation of underground gas supply networks - Part 3: Lining with close-fit pipes
$68.00 ISO 1167-1:2006 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 1: General method
$45.00 ISO 1167-2:2006 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 2: Preparation of pipe test pieces
$68.00 ISO 1167-3:2007 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 3: Preparation of components
$45.00 ISO 1167-4:2007 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 4: Preparation of assemblies
$68.00 ISO 12162:2009 Thermoplastics materials for pipes and fittings for pressure applications - Classification, designation and design coefficient
$138.00 ISO 12176-1:2012 Plastics pipes and fittings - Equipment for fusion jointing polyethylene systems - Part 1: Butt fusion
$138.00 ISO 12176-2:2008 Plastics pipes and fittings - Equipment for fusion jointing polyethylene systems - Part 2: Electrofusion
$68.00 ISO 12176-3:2011 Plastics pipes and fittings - Equipment for fusion jointing polyethylene systems - Part 3: Operators badge
$68.00 ISO 13260:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading
$45.00 ISO 13262:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam
$45.00 ISO 13263:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for impact strength
$45.00 ISO 13264:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for mechanical strength or flexibility of fabricated fittings
$103.00 ISO 13265:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Joints for buried non-pressure applications - Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure
$45.00 ISO 13266:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of resistance against surface and traffic loading
$68.00 ISO 13267:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics inspection chamber and manhole bases - Test methods for buckling resistance
$68.00 ISO 13268:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of ring stiffness
$138.00 ISO 13272:2011 Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP), polypropylene with mineral modifiers (PP-MD) and polyethylene (PE) - Specifications for manholes and inspection chambers in traffic areas and underground installations
$45.00 ISO 13761:1996 Plastics pipes and fittings -- Pressure reduction factors for polyethylene pipeline systems for use at temperatures above 20 degrees C
$45.00 ISO 13924:2000 Plastics pipes and fittings - Bending-tensile cycle test for PE/metal transition fittings, PE tapping tees and PE branch saddles
$209.00 ISO 13950:2007 Plastics pipes and fittings - Automatic recognition systems for electrofusion joints
$45.00 ISO 13957:1997 Plastics pipes and fittings -- Polyethylene (PE) tapping tees -- Test method for impact resistance
$45.00 ISO 13966:1998 Thermoplastics pipes and fittings -- Nominal ring stiffnesses
$103.00 ISO 13967:2009 Thermoplastics fittings - Determination of ring stiffness
$68.00 ISO 1452-1:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: General
$138.00 ISO 1452-2:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Pipes
$185.00 ISO 1452-3:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 3: Fittings
$68.00 ISO 1452-4:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 4: Valves
$103.00 ISO 1452-5:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 5: Fitness for purpose of the system
$138.00 ISO 14531-1:2002 Plastics pipes and fittings - Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels - Metric series Specifications - Part 1: Pipes
$162.00 ISO 14531-2:2004 Plastics pipes and fittings - Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels - Metric series - Specifications - Part 2: Fittings for heat-fusion jointing
$138.00 ISO 14531-3:2010 Plastics pipes and fittings - Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels - Metric series - Specifications - Part 3: Fittings for mechanical jointing (including PE-X/metal transitions)
$103.00 ISO 14531-4:2006 Plastics pipes and fittings - Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels - Metric series - Specifications - Part 4: System design and installation guidelines
$45.00 ISO 15306:2003 Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the resistance to cyclic internal pressure
$19.00 ISO 15306/Amd1:2012 Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the resistance to cyclic internal pressure - Amendment 1
$103.00 ISO 15874-3:2013 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings
$68.00 ISO 15875-3:2003 Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings
$103.00 ISO 15876-3:2017 Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings
$88.00 ISO 15876-3:2003 Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 3: Fittings
$138.00 ISO 15877-3:2009 Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings
$19.00 ISO 15877-3/Amd1:2010 Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings - Amendment 1
$103.00 ISO 16241:2005 Notch tensile test to measure the resistance to slow crack growth of polyethylene materials for pipe and fitting products (PENT)
$138.00 ISO 16422:2014 Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure - Specifications
$68.00 ISO 16871:2003 Plastics piping and ducting systems - Plastics pipes and fittings - Method for exposure to direct (natural) weathering
$45.00 ISO/TR 16913:1999 Plastics pipes and fittings -- Definitions of types of test
$138.00 ISO 17467-1:2012 Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems jointed by solvent cement - Part 1: General
$68.00 ISO 17467-2:2012 Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems jointed by solvent cement - Part 2: Pipes
$45.00 ISO 17467-3:2012 Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems jointed by solvent cement - Part 3: Fittings
$162.00 ISO 17484-1:2014 Plastics piping systems - Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) - Part 1: Specifications for systems
$68.00 ISO 17484-2:2009 Plastics piping systems - Multilayer pipe systems for indoor gas installations - Part 2: Code of pratice
$185.00 ISO 17885:2015 Plastics piping systems - Mechanical fittings for pressure piping systems - Specifications
$19.00 ISO 17885:2015/Amd1:2016 - Amendment 1
$103.00 ISO/TS 17902:2016 Wrapped electrofoaming joints for polyethylene (PE) piping systems with smooth outer wall for gravity drains and sewers
$103.00 ISO 18225:2012 Plastics piping systems - Multilayer piping systems for outdoor gas installations - Specifications for systems
$185.00 ISO/TS 18226:2006 Plastics pipes and fittings - Reinforced thermoplastics pipe systems for the supply of gaseous fuels for pressures up to 4 MPa (40 bar)
$68.00 ISO 18488:2015 Polyethylene (PE) materials for piping systems - Determination of Strain Hardening Modulus in relation to slow crack growth - Test method
$68.00 ISO 18489:2015 Polyethylene (PE) materials for piping systems - Determination of resistance to slow crack growth under cyclic loading - Cracked Round Bar test method
$68.00 ISO 18553:2002 Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds
$19.00 ISO 18553/Amd1:2007 Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds - Amendment 1
$209.00 ISO 18672-1:2009 Plastics piping systems for non-pressure drainage and sewerage - Polyester resin concrete (PRC) - Part 1: Pipes and fittings with flexible joints
$103.00 ISO/TR 19480:2005 Polyethylene pipes and fittings for the supply of gaseous fuels or water - Training and assessment of fusion operators
$68.00 ISO 19893:2011 Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling
$45.00 ISO/TS 19911:2010 Plastics pipes and fittings - Format of a technical file for characterizing PE spigot end fittings
$68.00 ISO 21003-3:2008 Multilayer piping systems for hot and cold water installations inside buildings - Part 3: Fittings
$138.00 ISO 21004:2006 Plastics piping systems - Multilayer pipes and their joints, based on thermoplastics, for water supply
$103.00 ISO 21138-1:2007 Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: Material specifications and performance criteria for pipes, fittings and system
$185.00 ISO 21138-2:2007 Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Pipes and fittings with smooth external surface, Type A
$185.00 ISO 21138-3:2007 Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 3: Pipes and fittings with non-smooth external surface, Type B
$68.00 ISO 21307:2011 Plastics pipes and fittings - Butt fusion jointing procedures for polyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems
$68.00 ISO 21751:2011 Plastics pipes and fittings - Decohesion test of electrofusion assemblies - Strip-bend test
$103.00 ISO 22391-3:2009 Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings
$45.00 ISO 2507-1:1995 Thermoplastics pipes and fittings -- Vicat softening temperature -- Part 1: General test method
$45.00 ISO 2507-2:1995 Thermoplastics pipes and fittings -- Vicat softening temperature -- Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly(vinyl chloride) (PVC-HI) pipes
$45.00 ISO 2507-3:1995 Thermoplastics pipes and fittings -- Vicat softening temperature -- Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings
$138.00 ISO 265-1:1988 Pipes and fittings of plastics materials - Fittings for domestic and industrial waste pipes - Basic dimensions : Metric series - Part 1: Unplasticized poly(vinyl chloride) (PVC-U)
$45.00 ISO/TS 26873:2010 Plastics pipes and fittings - Definition and construction procedures for reference lines
$45.00 ISO 3514:1976 Chlorinated polyvinyl chloride (CPVC) pipes and fittings -- Specification and determination of density
$45.00 ISO 3603:1977 Fittings for unplasticized polyvinyl chloride (PVC) pressure pipes with elastic sealing ring type joints -- Pressure test for leakproofness
$45.00 ISO 4132:1979 Unplasticized polyvinyl chloride (PVC) and metal adaptor fittings for pipes under pressure -- Laying lengths and size of threads -- Metric series
$103.00 ISO 4427-1:2007 Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - Part 1: General
$19.00 ISO 4427-1:2007/Amd1:2015 - Amendment 1: Melt mass-flow rate (MFR) for PE 80 and PE 100
$162.00 ISO 4427-3:2007 Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - Part 3: Fittings
$68.00 ISO 4427-5:2007 Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - Part 5: Fitness for purpose of the system
$45.00 ISO 4439:1979 Unplasticized polyvinyl chloride (PVC) pipes and fittings -- Determination and specification of density
$45.00 ISO 580:2005 Plastics piping and ducting systems - Injection-moulded thermoplastics fittings - Methods for visually assessing the effects of heating
$45.00 ISO 7245:1984 Pipes and fittings of acrylonitrile/butadiene/styrene (ABS) -- General specification for moulding and extrusion materials
$45.00 ISO 7246:1984 Pipes and fittings of acrylonitrile/styrene/acrylester (ASA) -- General specification for moulding and extrusion materials
$45.00 ISO 727-1:2002 Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure - Part 1: Metric series
$68.00 ISO 727-2:2005 Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure - Part 2: Inch-based series
$68.00 ISO 7432:2002 Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods to prove the design of locked socket-and-spigot joints, including double-socket joints, with elastomeric seals
$45.00 ISO 7510:1997 Plastics piping systems -- Glass-reinforced plastics (GRP) components -- Determination of the amounts of constituents using the gravimetric method
$45.00 ISO 7511:1999 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods to prove the leaktightness of the wall under short-term internal pressure
$45.00 ISO 7686:2005 Plastics pipes and fittings - Determination of opacity
$68.00 ISO 8283-1:1991 Plastics pipes and fittings - Dimensions of sockets and spigots for discharge systems inside buildings - Part 1: Unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C)
$45.00 ISO 8283-2:1992 Plastics pipes and fittings - Dimensions of sockets and spigots for discharge systems inside buildings - Part 2: Polyethylene (PE)
$45.00 ISO 8283-3:1992 Plastics pipes and fittings - Dimensions of sockets and spigots for discharge systems inside buildings - Part 3: Polypropylene (PP)
$68.00 ISO 8283-4:1992 Plastics pipes and fittings - Dimensions of sockets and spigots for discharge systems inside buildings - Part 4: Acrylonitrile/butadiene/styrene (ABS)
$45.00 ISO 8361-1:1991 Thermoplastics pipes and fittings -- Water absorption -- Part 1: General test method
$45.00 ISO 8361-2:1991 Thermoplastics pipes and fittings -- Water absorption -- Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings
$45.00 ISO 8361-3:1991 Thermoplastics pipes and fittings -- Water absorption -- Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) pipes and fittings
$68.00 ISO 8483:2003 Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods to prove the design of bolted flange joints
$19.00 ISO 8483/Amd1:2012 Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods to prove the design of bolted flange joints - Amendment 1
$68.00 ISO 8533:2003 Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods to prove the design of cemented or wrapped joints
$19.00 ISO 8533/Amd1:2012 Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods to prove the design of cemented or wrapped joints - Amendment 1
$138.00 ISO 8772:2006 Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE)
$138.00 ISO 8773:2006 Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP)
$45.00 ISO 9623:1997 PE/metal and PP/metal adaptor fittings for pipes for fluids under pressure -- Design lengths and size of threads -- Metric series
$45.00 ISO 9853:1991 Injection-moulded unplasticized poly(vinyl chloride) (PVC-U) fittings for pressure pipe systems -- Crushing test
$97.00 JIS K 6770:2016 Crosslinked polyethylene (PE-X) pipe fittings
$59.00 JIS K 6770:2004 Crosslinked polyethylene (PE-X) pipe fittings
$9.00 JIS K 6770:2004/AMENDMENT 3:2010 Crosslinked polyethylene (PE-X) pipe fittings (Amendment 3)
$10.00 JIS K 6777:2007/AMENDMENT 2:2010 Chlorinated poly (vinyl chloride) (PVC-C) pipe fittings for hot and cold water supply (Amendment 2)
$68.00 JIS K 6779:2004 Polybutene (PB) pipe fittings
$10.00 JIS K 6779:2004/AMENDMENT 2:2010 Polybutene (PB) pipe fittings (Amendment 2)
$97.00 JIS K 6788:2016 Crosslinked polyethylene (PE-X) pipe fittings for water supply
$59.00 JIS K 6788:2004 Crosslinked polyethylene (PE-X) pipe fittings for water supply
$9.00 JIS K 6788:2004/AMENDMENT 2:2010 Crosslinked polyethylene (PE-X) pipe fittings for water supply (Amendment 2)
$10.00 JIS K 6793:2004/AMENDMENT 2:2010 Polybutene (PB) pipe fittings for water supply (Amendment 2)
$138.00 ISO 12176-1:2017 Plastics pipes and fittings - Equipment for fusion jointing polyethylene systems - Part 1: Butt fusion
$19.00 ISO 13260:2010/Amd1:2017 - Amendment 1
$45.00 ISO 13761:2017 Plastics pipes and fittings - Pressure reduction factors for polyethylene pipeline systems for use at temperatures above 20 degrees C
$138.00 ISO 16611:2017 Plastics piping systems for drainage and sewerage without pressure - Non-circular pipes and joints made of glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resins (UP) - Dimensions, requirements and tests
$45.00 ISO 7510:2017 Plastics piping systems - Glass-reinforced plastics (GRP) components - Determination of the amounts of constituents
$103.00 ISO 10464:2004 Gas cylinders - Refillable welded steel cylinders for liquefied petroleum gas (LPG) - Periodic inspection and testing
$88.00 ISO 10838-1:2000 Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels -- Part 1: Metal fittings for pipes of nominal outside diameter less than or equal to 63 mm
$88.00 ISO 10838-2:2000 Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels -- Part 2: Metal fittings for pipes of nominal outside diameter greater than 63 mm
$123.00 ISO 10838-3:2001 Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels -- Part 3: Thermoplastics fittings for pipes of nominal outside diameter less than or equal to 63 mm
$162.00 ISO/TS 10839:2000 Polyethylene pipes and fittings for the supply of gaseous fuels - Code of practice for design, handling and installation
$173.00 ISO 10933:1997 Polyethylene (PE) valves for gas distribution systems
$103.00 ISO 11299-1:2011 Plastics piping systems for renovation of underground gas supply networks - Part 1: General
$103.00 ISO 11299-3:2011 Plastics piping systems for renovation of underground gas supply networks - Part 3: Lining with close-fit pipes
$45.00 ISO 11563:2003 Crude petroleum and petroleum products - Bulk cargo transfer - Guidelines for achieving the fullness of pipelines
$68.00 ISO 11759:1999 Rubber hoses and hose assemblies for dispensing liquefied petroleum gases (LPGs) -- Specification
$138.00 ISO 12176-1:2012 Plastics pipes and fittings - Equipment for fusion jointing polyethylene systems - Part 1: Butt fusion
$138.00 ISO 12176-2:2008 Plastics pipes and fittings - Equipment for fusion jointing polyethylene systems - Part 2: Electrofusion
$232.00 ISO/TR 12489:2013 Petroleum, petrochemical and natural gas industries - Reliability modelling and calculation of safety systems
$209.00 ISO 12490:2011 Petroleum and natural gas industries - Mechanical integrity and sizing of actuators and mounting kits for pipeline valves
$138.00 ISO/TS 12747:2011 Petroleum and natural gas industries - Pipeline transportation systems - Recommended practice for pipeline life extension
$103.00 ISO 12991:2012 Liquefied natural gas (LNG) - Tanks for on-board storage as a fuel for automotive vehicles
$232.00 ISO 13623:2009 Petroleum and natural gas industries - Pipeline transportation systems
$232.00 ISO 13679:2002 Petroleum and natural gas industries - Procedures for testing casing and tubing connections
$232.00 ISO 13847:2013 Petroleum and natural gas industries - Pipeline transportation systems - Welding of pipelines
$232.00 ISO 14224:2016 Petroleum, petrochemical and natural gas industries - Collection and exchange of reliability and maintenance data for equipment
$265.00 ISO 14224:2006 Petroleum, petrochemical and natural gas industries - Collection and exchange of reliability and maintenance data for equipment
$209.00 ISO 14313:2007 Petroleum and natural gas industries - Pipeline transportation systems - Pipeline valves
$138.00 ISO 14531-1:2002 Plastics pipes and fittings - Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels - Metric series Specifications - Part 1: Pipes
$162.00 ISO 14531-2:2004 Plastics pipes and fittings - Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels - Metric series - Specifications - Part 2: Fittings for heat-fusion jointing
$138.00 ISO 14531-3:2010 Plastics pipes and fittings - Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels - Metric series - Specifications - Part 3: Fittings for mechanical jointing (including PE-X/metal transitions)
$103.00 ISO 14531-4:2006 Plastics pipes and fittings - Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels - Metric series - Specifications - Part 4: System design and installation guidelines
$138.00 ISO 14692-1:2002 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 1: Vocabulary, symbols, applications and materials
$232.00 ISO 14692-2:2002 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 2: Qualification and manufacture
$209.00 ISO 14692-3:2002 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 3: System design
$209.00 ISO 14692-4:2002 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 4: Fabrication, installation and operation
$209.00 ISO 14723:2009 Petroleum and natural gas industries - Pipeline transportation systems - Subsea pipeline valves
$209.00 ISO 15589-1:2015 Petroleum, petrochemical and natural gas industries - Cathodic protection of pipeline systems - Part 1: On-land pipelines
$200.00 ISO 15589-1:2003 Petroleum and natural gas industries - Cathodic protection of pipeline transportation systems - Part 1: On-land pipelines
$209.00 ISO 15589-2:2012 Petroleum, petrochemical and natural gas industries - Cathodic protection of pipeline transportation systems - Part 2: Offshore pipelines
$162.00 ISO 15590-1:2009 Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 1: Induction bends
$138.00 ISO 15590-2:2003 Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 2: Fittings
$103.00 ISO 15590-3:2004 Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 3: Flanges
$103.00 ISO 15649:2001 Petroleum and natural gas industries -- Piping
$185.00 ISO 16380:2014 Road vehicles - Blended fuels refuelling connector
$19.00 ISO 16380:2014/Amd1:2016 - Amendment 1
$185.00 ISO 16440:2016 Petroleum and natural gas industries - Pipeline transportation systems - Design, construction and maintenance of steel cased pipelines
$138.00 ISO 16486-1:2012 Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 1: General
$19.00 ISO 16486-1:2012/Amd1:2014 - Amendment 1
$68.00 ISO 16486-2:2012 Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 2: Pipes
$19.00 ISO 16486-2:2012/Amd1:2014 - Amendment 1
$103.00 ISO 16486-3:2012 Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 3: Fittings
$19.00 ISO 16486-3:2012/Amd1:2014 - Amendment 1
$103.00 ISO 16486-4:2016 Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 4: Valves
$138.00 ISO 16486-5:2012 Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 5: Fitness for purpose of the system
$138.00 ISO 16486-6:2012 Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 6: Code of practice for design, handling and installation
$209.00 ISO 16708:2006 Petroleum and natural gas industries - Pipeline transportation systems - Reliability-based limit state methods
$185.00 ISO 16923:2016 Natural gas fuelling stations - CNG stations for fuelling vehicles
$209.00 ISO 16924:2016 Natural gas fuelling stations - LNG stations for fuelling vehicles
$185.00 ISO 16961:2015 Petroleum, petrochemical and natural gas industries - Internal coating and lining of steel storage tanks
$162.00 ISO/TR 17177:2015 Petroleum and natural gas industries - Guidelines for the marine interfaces of hybrid LNG terminals
$138.00 ISO 17292:2015 Metal ball valves for petroleum, petrochemical and allied industries
$185.00 ISO 17885:2015 Plastics piping systems - Mechanical fittings for pressure piping systems - Specifications
$19.00 ISO 17885:2015/Amd1:2016 - Amendment 1
$103.00 ISO 18225:2012 Plastics piping systems - Multilayer piping systems for outdoor gas installations - Specifications for systems
$185.00 ISO/TS 18226:2006 Plastics pipes and fittings - Reinforced thermoplastics pipe systems for the supply of gaseous fuels for pressures up to 4 MPa (40 bar)
$138.00 ISO 1823:2015 Rubber hose and hose assemblies for oil suction and discharge service - Specification
$88.00 ISO 1823-1:1997 Rubber hoses and hose assemblies - Part 1: On-shore oil suction and discharge - Specification
$88.00 ISO 1823-2:1997 Rubber hoses and hose assemblies - Part 2: Ship/dockside discharge - Specification
$185.00 ISO/TS 18683:2015 Guidelines for systems and installations for supply of LNG as fuel to ships
$138.00 ISO 20088-1:2016 Determination of the resistance to cryogenic spillage of insulation materials - Part 1: Liquid phase
$209.00 ISO 20815:2008 Petroleum, petrochemical and natural gas industries - Production assurance and reliability management
$68.00 ISO 21307:2011 Plastics pipes and fittings - Butt fusion jointing procedures for polyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems
$232.00 ISO 21329:2004 Petroleum and natural gas industries - Pipeline transportation systems - Test procedures for mechanical connectors
$209.00 ISO 21809-1:2011 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 1: Polyolefin coatings (3-layer PE and 3-layer PP)
$185.00 ISO 21809-2:2014 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 2: Single layer fusion-bonded epoxy coatings
$180.00 ISO 21809-2:2007 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 2: Fusion-bonded epoxy coatings
$232.00 ISO 21809-3:2016 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings
$265.00 ISO 21809-3:2008 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings
$22.00 ISO 21809-3/Amd1:2011 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings - AMENDMENT 1
$162.00 ISO 21809-4:2009 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 4: Polyethylene coatings (2-layer PE)
$162.00 ISO 21809-5:2010 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 5: External concrete coatings
$162.00 ISO 22991:2004 Gas cylinders - Transportable refillable welded steel cylinders for liquefied petroleum gas (LPG) - Design and construction
$103.00 ISO 27127:2014 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas - Specification
$162.00 ISO 28460:2010 Petroleum and natural gas industries - Installation and equipment for liquefied natural gas - Ship-to-shore interface and port operations
$68.00 ISO 2928:2003 Rubber hoses and hose assemblies for liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas up to 25 bar (2,5 MPa) -- Specification
$103.00 ISO 2929:2014 Rubber hoses and hose assemblies for bulk fuel delivery by truck - Specification
$232.00 ISO 3183:2012 Petroleum and natural gas industries - Steel pipe for pipeline transportation systems
$103.00 ISO 4437-1:2014 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General
$103.00 ISO 4437-2:2014 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 2: Pipes
$162.00 ISO 4437-3:2014 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 3: Fittings
$103.00 ISO 4437-4:2015 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 4: Valves
$68.00 ISO 4437-5:2014 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 5: Fitness for purpose of the system
$138.00 ISO 5772:2015 Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems - Specification
$88.00 ISO 5772:1998 Rubber hoses and hose assemblies for measured fuel dispensing - Specification
$45.00 ISO 6447:1983 Rubber seals - Joint rings used for gas supply pipes and fittings - Specification for material
$45.00 ISO 6448:1985 Rubber seals - Joint rings used for petroleum product supply pipes and fittings - Specification for material
$103.00 ISO 6808:2014 Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids - Specification
$99.00 ISO 6808:1999 Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids - Specification
$103.00 ISO 6993-1:2006 Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels - Part 1: Pipes for a maximum operating pressure of 1 bar (100 kPa)
$103.00 ISO 6993-2:2006 Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels - Part 2: Fittings for a maximum operating pressure of 200 mbar (20 kPa)
$138.00 ISO 6993-3:2006 Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels - Part 3: Fittings and saddles for a maximum operating pressure of 1 bar (100 kPa)
$103.00 ISO 6993-4:2006 Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels - Part 4: Code of practice for design, handling and installation
$45.00 ISO 9158:1988 Road vehicles -- Nozzle spouts for unleaded gasoline
$45.00 ISO 9159:1988 Road vehicles -- Nozzle spouts for leaded gasoline and diesel fuel
$232.00 ISO/PAS 12835:2013 Qualification of casing connections for thermal wells
$107.00 JIS B 8572-1:2008 Fuel oil flow meters -- Measuring instruments used in transaction or certification -- Part 1: Fuel dispensers for motor vehicles
$138.00 ISO 12176-1:2017 Plastics pipes and fittings - Equipment for fusion jointing polyethylene systems - Part 1: Butt fusion
$209.00 ISO 14692-1:2017 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 1: Vocabulary, symbols, applications and materials
$209.00 ISO 14692-2:2017 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 2: Qualification and manufacture
$185.00 ISO 14692-3:2017 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 3: System design
$209.00 ISO 14692-4:2017 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 4: Fabrication, installation and operation
$162.00 ISO 21809-5:2017 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 5: External concrete coatings
$232.00 ISO 13623:2017 Petroleum and natural gas industries - Pipeline transportation systems