ISO 11553-3:2013 - $68.00   BUY NOW

Safety of machinery - Laser processing machines - Part 3: Noise reduction and noise measurement methods for laser processing machines and hand-held processing devices and associated auxiliary equipment (accuracy grade 2)

ISO 11553-3:2013 Publication Description:

ISO/IEC 11553-3:2013 describes the requirements to deal with noise hazards and specifies all the information necessary to carry out efficiently and under standardized conditions the determination, declaration and verification of airborne noise emission from laser processing machines and hand-held laser processing devices within the scope of ISO/IEC 11553-1 and ISO/IEC 11553-2. It specifies the safety requirements relating to noise hazards. It specifies noise measurement methods, installation and operating conditions to be used for the test, together with the information to be supplied by manufacturers of such equipment.

ISO/IEC 11553-3:2013 applies to those laser processing machines and hand-held laser processing devices included in the scope of ISO/IEC 11553-1 and ISO/IEC 11553-2.

Noise emission characteristics include emission sound pressure levels at work stations and the sound power level. Declared noise emission values permit comparison of laser processing machines and hand-held laser processing devices on the market.

The use of this noise test code (see Annex A) ensures the reproducibility of the determination of the characteristic noise emission values within specific limits. These limits are determined by the accuracy grade of the noise emission measuring method used. Noise emission measurements specified by ISO/IEC 11553-3:2013 meet the requirements of an engineering method (accuracy grade 2).

International Classification for Standards (ICS)

ICS Classification Field ICS Field Sub-Group and Number
ICS-13-Environment ICS Safety-Machinery (13.110)
ICS-31-Electronics ICS Optoelectronics-Laser Equipment (31.260)

ICS Related Standards

Cart Document Number Document Title
$185.00 ISO 11161:2007 Safety of machinery - Integrated manufacturing systems - Basic requirements
$19.00 ISO 11161/Amd1:2010 Industrial automation systems - Safety of integrated manufacturing systems - Basic requirements - Amendment 1
$103.00 ISO 11553-1:2005 Safety of machinery - Laser processing machines - Part 1: General safety requirements
$138.00 ISO 11553-2:2007 Safety of machinery - Laser processing machines - Part 2: Safety requirements for hand-held laser processing devices
$209.00 ISO 12100:2010 Safety of machinery - General principles for design - Risk assessment and risk reduction
$103.00 ISO 13105-2:2014 Building construction machinery and equipment - Machinery for concrete surface floating and finishing - Part 2: Safety requirements and verification
$232.00 ISO 13849-1:2015 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design
$265.00 ISO 13849-1:2006 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design
$209.00 ISO 13849-2:2012 Safety of machinery - Safety-related parts of control systems - Part 2: Validation
$68.00 ISO 13850:2015 Safety of machinery - Emergency stop function - Principles for design
$51.00 ISO 13850:2006 Safety of machinery - Emergency stop - Principles for design
$138.00 ISO 13851:2002 Safety of machinery - Two-hand control devices - Functional aspects and design principles
$45.00 ISO 13854:1996 Safety of machinery - Minimum gaps to avoid crushing of parts of the human body
$185.00 ISO 13855:2010 Safety of machinery - Positioning of safeguards with respect to the approach speeds of parts of the human body
$185.00 ISO 13856-1:2013 Safety of machinery - Pressure-sensitive protective devices - Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors
$209.00 ISO 13856-2:2013 Safety of machinery - Pressure-sensitive protective devices - Part 2: General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars
$209.00 ISO 13856-3:2013 Safety of machinery - Pressure-sensitive protective devices - Part 3: General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices
$103.00 ISO 13857:2008 Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs
$103.00 ISO 14118:2000 Safety of machinery -- Prevention of unexpected start-up
$209.00 ISO 14119:2013 Safety of machinery - Interlocking devices associated with guards - Principles for design and selection
$162.00 ISO 14120:2015 Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards
$149.00 ISO 14120:2002 Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards
$185.00 ISO/TR 14121-2:2012 Safety of machinery - Risk assessment - Part 2: Practical guidance and examples of methods
$68.00 ISO 14122-1:2016 Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means and general requirements of access
$88.00 ISO 14122-1:2001 Safety of machinery -- Permanent means of access to machinery -- Part 1: Choice of fixed means of access between two levels
$22.00 ISO 14122-1/Amd1:2010 Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means of access between two levels - Amendment 1
$103.00 ISO 14122-2:2016 Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways
$88.00 ISO 14122-2:2001 Safety of machinery -- Permanent means of access to machinery -- Part 2: Working platforms and walkways
$22.00 ISO 14122-2/Amd1:2010 Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways - Amendment 1
$138.00 ISO 14122-3:2016 Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails
$123.00 ISO 14122-3:2001 Safety of machinery -- Permanent means of access to machinery -- Part 3: Stairs, stepladders and guard-rails
$22.00 ISO 14122-3/Amd1:2010 Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails - Amendment 1
$185.00 ISO 14122-4:2016 Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders
$173.00 ISO 14122-4:2004 Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders
$22.00 ISO 14122-4/Amd1:2010 Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders - Amendment 1
$68.00 ISO 14123-1:2015 Safety of machinery - Reduction of risks to health resulting from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers
$88.00 ISO 14123-1:1998 Safety of machinery - Reduction of risks to health from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers
$45.00 ISO 14123-2:2015 Safety of machinery - Reduction of risks to health resulting from hazardous substances emitted by machinery - Part 2: Methodology leading to verification procedures
$51.00 ISO 14123-2:1998 Safety of machinery - Reduction of risks to health from hazardous substances emitted by machinery - Part 2: Methodology leading to verification procedures
$162.00 ISO 14159:2002 Safety of machinery - Hygiene requirements for the design of machinery
$138.00 ISO 14738:2002 Safety of machinery -- Anthropometric requirements for the design of workstations at machinery
$68.00 ISO 15534-1:2000 Ergonomic design for the safety of machinery - Part 1: Principles for determining the dimensions required for openings for whole-body access into machinery
$138.00 ISO 15534-2:2000 Ergonomic design for the safety of machinery - Part 2: Principles for determining the dimensions required for access openings
$45.00 ISO 15534-3:2000 Ergonomic design for the safety of machinery - Part 3: Anthropometric data
$68.00 ISO 15537:2004 Principles for selecting and using test persons for testing anthropometric aspects of industrial products and designs
$240.00 ISO/TR 18569:2004 Safety of machinery - Guidelines for the understanding and use of safety of machinery standards
$162.00 ISO 19353:2015 Safety of machinery - Fire prevention and fire protection
$149.00 ISO 19353:2005 Safety of machinery - Fire prevention and protection
$68.00 ISO 21469:2006 Safety of machinery - Lubricants with incidental product contact - Hygiene requirements
$103.00 ISO/TR 22100-1:2015 Safety of machinery - Relationship with ISO 12100 - Part 1: How ISO 12100 relates to type-B and type-C standards
$45.00 ISO/TR 22100-2:2013 Safety of machinery - Relationship with ISO 12100 - Part 2: How ISO 12100 relates to ISO 13849-1
$185.00 ISO/TR 22100-3:2016 Safety of machinery - Relationship with ISO 12100 - Part 3: Implementation of ergonomic principles in safety standards
$103.00 ISO/TR 23849:2010 Guidance on the application of ISO 13849-1 and IEC 62061 in the design of safety-related control systems for machinery
$138.00 ISO/TR 24119:2015 Safety of machinery - Evaluation of fault masking serial connection of interlocking devices associated with guards with potential free contacts
$68.00 ISO 29042-1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 1: Selection of test methods
$68.00 ISO 29042-2:2009 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 2: Tracer gas method for the measurement of the emission rate of a given pollutant
$68.00 ISO 29042-3:2009 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 3: Test bench method for the measurement of the emission rate of a given pollutant
$68.00 ISO 29042-4:2009 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 4: Tracer method for the measurement of the capture efficiency of an exhaust system
$45.00 ISO 29042-5:2010 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 5: Test bench method for the measurement of the separation efficiency by mass of air cleaning systems with unducted outlet
$45.00 ISO 29042-6:2010 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 6: Test bench method for the measurement of the separation efficiency by mass of air cleaning systems with ducted outlet
$45.00 ISO 29042-7:2010 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 7: Test bench method for the measurement of the pollutant concentration parameter
$45.00 ISO 29042-8:2011 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 8: Room method for the measurement of the pollutant concentration parameter
$68.00 ISO 29042-9:2011 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 9: Decontamination index
$138.00 ISO Guide 78:2012 Safety of machinery - Rules for drafting and presentation of safety standards
$49.00 JIS B 9703:2011 Safety of machinery -- Emergency stop -- Principles for design
$339.00 JIS B 9704-3:2011 Safety of machinery -- Electro-sensitive protective equipment -- Part 3: Particular requirements for Active Opto-electronic Protective Devices responsive to Diffuse Reflection (AOPDDR)
$242.00 JIS B 9705-1:2011 Safety of machinery -- Safety-related parts of control systems -- Part 1: General principles for design
$145.00 JIS B 9706-1:2009 Safety of machinery -- Indication, marking and actuation -- Part 1: Requirements for visual, acoustic and tactile signals
$58.00 JIS B 9706-2:2009 Safety of machinery -- Indication, marking and actuation -- Part 2: Requirements for marking
$58.00 JIS B 9706-3:2009 Safety of machinery -- Indication, marking and actuation -- Part 3: Requirements for the location and operation of actuators
$68.00 JIS B 9709-1:2001 Safety of machinery -- Reduction of risks to health from hazardous substances emitted by machinery -- Part 1: Principles and specifications for machinery manufacturers
$49.00 JIS B 9709-2:2001 Safety of machinery -- Reduction of risks to health from hazardous substances emitted by machinery -- Part 2: Methodology leading to verification procedures
$49.00 JIS B 9711:2002 Safety of machinery -- Minimum gaps to avoid crushing of parts of the human body
$68.00 JIS B 9713-1:2004 Safety of machinery -- Permanent means of access to machinery -- Part 1: Choice of a fixed means of access between two levels
$68.00 JIS B 9713-2:2004 Safety of machinery -- Permanent means of access to machinery -- Part 2: Working platforms and walkways
$107.00 JIS B 9713-3:2004 Safety of machinery -- Permanent means of access to machinery -- Part 3: Stairs, stepladders and guard-rails
$68.00 JIS B 9713-4:2004 Safety of machinery -- Permanent means of access to machinery -- Part 4: Fixed ladders
$145.00 JIS B 9717-1:2011 Safety of machinery -- Pressure-sensitive protective devices -- Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors
$116.00 JIS B 9960-11:2004 Safety of machinery -- Electrical equipment of machines -- Part 11: Requirements for HV equipment for voltages above 1000V a.c. or 1500V d.c. and not exceeding 36kV
$15.00 JIS B 9960-1:2008/AMENDMENT 1:2011 Safety of machinery -- Electrical equipment of machines -- Part 1: General requirements (Amendment 1)
$68.00 JIS B 9960-31:2004 Safety of machinery -- Electrical equipment of machines -- Part 31: Particular safety and EMC requirements for sewing machines, units and systems
$185.00 ISO 19085-1:2017 Woodworking machines - Safety - Part 1: Common requirements
$162.00 ISO 19085-2:2017 Woodworking machines - Safety - Part 2: Horizontal beam panel circular sawing machines
$185.00 ISO 19085-5:2017 Woodworking machines - Safety - Part 5: Dimension saws
$45.00 ISO 10110-17:2004 Optics and photonics - Preparation of drawings for optical elements and systems - Part 17: Laser irradiation damage threshold
$138.00 ISO 11145:2016 Optics and photonics - Lasers and laser-related equipment - Vocabulary and symbols
$173.00 ISO 11145:2006 Optics and photonics - Lasers and laser-related equipment - Vocabulary and symbols
$103.00 ISO 11146-1:2005 Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 1: Stigmatic and simple astigmatic beams
$103.00 ISO 11146-2:2005 Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 2: General astigmatic beams
$138.00 ISO/TR 11146-3:2004 Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 3: Intrinsic and geometrical laser beam classification, propagation and details of test methods
$68.00 ISO 11151-1:2015 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges
$88.00 ISO 11151-1:2000 Lasers and laser-related equipment -- Standard optical components -- Part 1: Components for the UV, visible and near-infrared spectral ranges
$68.00 ISO 11151-2:2015 Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range
$88.00 ISO 11151-2:2000 Lasers and laser-related equipment -- Standard optical components -- Part 2: Components for the infrared spectral range
$68.00 ISO 11252:2013 Lasers and laser-related equipment - Laser device - Minimum requirements for documentation
$103.00 ISO 11551:2003 Optics and optical instruments - Lasers and laser-related equipment - Test method for absorptance of optical laser components
$103.00 ISO 11553-1:2005 Safety of machinery - Laser processing machines - Part 1: General safety requirements
$138.00 ISO 11553-2:2007 Safety of machinery - Laser processing machines - Part 2: Safety requirements for hand-held laser processing devices
$103.00 ISO 11554:2006 Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics
$103.00 ISO 11670:2003 Lasers and laser-related equipment - Test methods for laser beam parameters - Beam positional stability
$138.00 ISO 11807-1:2001 Integrated optics -- Vocabulary -- Part 1: Basic terms and symbols
$68.00 ISO 11807-2:2001 Integrated optics -- Vocabulary -- Part 2: Terms used in classification
$138.00 ISO 11810:2015 Lasers and laser-related equipment - Test method and classification for the laser resistance of surgical drapes and/or patient protective covers - Primary ignition, penetration, flame spread and secondary ignition
$88.00 ISO 11810-2:2007 Lasers and laser-related equipment - Test method and classification for the laser-resistance of surgical drapes and/or patient-protective covers - Part 2: Secondary ignition
$68.00 ISO 11990-1:2011 Lasers and laser-related equipment - Determination of laser resistance of tracheal tubes - Part 1: Tracheal tube shaft
$68.00 ISO 11990-2:2010 Lasers and laser-related equipment - Determination of laser resistance of tracheal tubes - Part 2: Tracheal tube cuffs
$68.00 ISO 12005:2003 Lasers and laser-related equipment - Test methods for laser beam parameters - Polarization
$103.00 ISO 13142:2015 Electro-optical systems - Cavity ring-down technique for high-reflectance measurement
$103.00 ISO 13694:2015 Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution
$123.00 ISO 13694:2000 Optics and optical instruments -- Lasers and laser-related equipment -- Test methods for laser beam power (energy) density distribution
$138.00 ISO 13695:2004 Optics and photonics - Lasers and laser-related equipment - Test methods for the spectral characteristics of lasers
$138.00 ISO 13696:2002 Optics and optical instruments - Test methods for radiation scattered by optical components
$103.00 ISO 13697:2006 Optics and photonics - Lasers and laser-related equipment - Test methods for specular reflectance and regular transmittance of optical laser components
$138.00 ISO 14880-1:2016 Optics and photonics - Microlens arrays - Part 1: Vocabulary and general properties
$88.00 ISO 14880-1:2001 Microlens array - Part 1: Vocabulary
$138.00 ISO 14880-2:2006 Optics and photonics - Microlens arrays - Part 2: Test methods for wavefront aberrations
$103.00 ISO 14880-3:2006 Optics and photonics - Microlens arrays - Part 3: Test methods for optical properties other than wavefront aberrations
$138.00 ISO 14880-4:2006 Optics and photonics - Microlens arrays - Part 4: Test methods for geometrical properties
$103.00 ISO/TR 14880-5:2010 Optics and photonics - Microlens arrays - Part 5: Guidance on testing
$45.00 ISO 14881:2001 Integrated optics -- Interfaces -- Parameters relevant to coupling properties
$138.00 ISO 15367-1:2003 Lasers and laser-related equipment - Test methods for determination of the shape of a laser beam wavefront - Part 1: Terminology and fundamental aspects
$138.00 ISO 15367-2:2005 Lasers and laser-related equipment - Test methods for determination of the shape of a laser beam wavefront - Part 2: Shack-Hartmann sensors
$138.00 ISO 15902:2004 Optics and optical instruments - Diffractive optics - Vocabulary
$68.00 ISO 17526:2003 Optics and optical instruments - Lasers and laser-related equipment - Lifetime of lasers
$162.00 ISO/TS 17915:2013 Optics and photonics - Measurement method of semiconductor lasers for sensing
$103.00 ISO 21254-1:2011 Lasers and laser-related equipment - Test methods for laser-induced damage threshold - Part 1: Definitions and general principles
$185.00 ISO 21254-2:2011 Lasers and laser-related equipment - Test methods for laser-induced damage threshold - Part 2: Threshold determination
$103.00 ISO 21254-3:2011 Lasers and laser-related equipment - Test methods for laser-induced damage threshold - Part 3: Assurance of laser power (energy) handling capabilities
$138.00 ISO/TR 21254-4:2011 Lasers and laser-related equipment - Test methods for laser-induced damage threshold - Part 4: Inspection, detection and measurement
$138.00 ISO/TR 22588:2005 Optics and photonics - Lasers and laser-related equipment - Measurement and evaluation of absorption-induced effects in laser optical components
$103.00 ISO 24013:2006 Optics and photonics - Lasers and laser-related equipment - Measurement of phase retardation of optical components for polarized laser radiation
$39.00 JIS C 5871:2011 Test methods of interference filters
$78.00 JIS C 5942:2010 General rules of laser diodes used for recording and playback
$107.00 JIS C 5943:2010 Measuring methods of laser diodes used for recording and playback
$103.00 ISO 11554:2017 Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics
$68.00 ISO/TR 20811:2017 Optics and photonics - Lasers and laser-related equipment - Laser-induced molecular contamination testing