ISO 11295:2017 - $209.00   BUY NOW

Classification and information on design and applications of plastics piping systems used for renovation and replacement

ISO 11295:2017 Publication Description:

ISO 11295:2017 defines and describes families of techniques for the renovation and trenchless replacement (on or off the line of an existing pipeline) of non-pressure and pressure pipelines through the use of plastics pipes, including plastics composites formed in situ into pipes, fittings and ancillary components. It does not include new construction provided as network extension. For each technique family, it identifies areas of application including, but not limited to, underground drainage and sewerage, and underground water and gas supply networks.

ISO 11295:2017 provides information on the principles of, but not the detailed methodologies for, the design of plastics piping systems used for renovation or trenchless replacement of existing pipelines, covering:

- existing pipeline and site conditions;

- functions of the new pipeline;

- structural performance;

- hydraulic performance;

- installation aspects and site impact;

- other factors affecting renovation or trenchless replacement technique selection.

Necessary work on the existing pipeline prior to renovation and/or trenchless replacement is outside the scope of ISO 11295:2017.

ISO 11295:2017 provides information needed to determine viable options and for identification of the optimal technique with regard to a given set of rehabilitation objectives.

NOTE It is the responsibility of the designer to choose and design the renovation or trenchless replacement system.

It does not specify the calculation methods to determine, for each viable technique, the required amount of lining or replacement pipe material needed to secure the desired performance of the rehabilitated pipeline.

International Classification for Standards (ICS)

ICS Classification Field ICS Field Sub-Group and Number
ICS-23-Fluid ICS Pipeline Components-General (23.040.01)

ICS Related Standards

Cart Document Number Document Title
$185.00 ISO/TS 10465-1:2007 Underground installation of flexible glass-reinforced pipes based on unsaturated polyester resin (GRP-UP) - Part 1: Installation procedures
$185.00 ISO/TR 10465-2:2007 Underground installation of flexible glass-reinforced pipes based on unsaturated polyester resin (GRP-UP) - Part 2: Comparison of static calculation methods
$209.00 ISO/TR 10465-3:2007 Underground installation of flexible glass-reinforced pipes based on unsaturated polyester resin (GRP-UP) - Part 3: Installation parameters and application limits
$45.00 ISO 10802:1992 Ductile iron pipelines -- Hydrostatic testing after installation
$45.00 ISO 10804:2010 Restrained joint systems for ductile iron pipelines - Design rules and type testing
$162.00 ISO 10931:2005 Plastics piping systems for industrial applications - Poly(vinylidene fluoride) (PVDF) - Specifications for components and the system
$19.00 ISO 10931:2005/Amd1:2015 - Amendment 1
$162.00 ISO 11295:2010 Classification and information on design of plastics piping systems used for renovation
$45.00 ISO 13056:2011 Plastics piping systems - Pressure systems for hot and cold water - Test method for leaktightness under vacuum
$45.00 ISO 13845:2015 Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with thermoplastic pressure pipes - Test method for leaktightness under internal pressure and with angular deflection
$45.00 ISO 13951:2015 Plastics piping systems - Test method for the resistance of plastic pipe/pipe or pipe/fitting assemblies to tensile loading
$51.00 ISO 13951:2001 Plastics piping systems -- Test method for the resistance of polyolefin pipe/pipe or pipe/fitting assemblies to tensile loading
$103.00 ISO 14617-3:2002 Graphical symbols for diagrams - Part 3: Connections and related devices
$209.00 ISO 15493:2003 Plastics piping systems for industrial applications - Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) - Specifications for components and the system Metric series
$19.00 ISO 15493:2003/Amd1:2016 - Amendment 1
$232.00 ISO 15494:2015 Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the system
$265.00 ISO 15494:2003 Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE) and polypropylene (PP) - Specifications for components and the system Metric series
$68.00 ISO 15853:1999 Thermoplastics materials -- Preparation of tubular test pieces for the determination of the hydrostatic strength of materials used for injection moulding
$68.00 ISO/TS 15874-7:2003 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 7: Guidance for the assessment of conformity
$68.00 ISO 15875-1:2003 Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 1: General
$19.00 ISO 15875-1/Amd1:2007 Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 1: General - Amendment 1
$68.00 ISO 15876-1:2017 Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 1: General
$88.00 ISO 15876-1:2003 Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 1: General
$22.00 ISO 15876-1/Amd1:2007 Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 1: General - Amendment 1
$103.00 ISO/TS 15877-7:2009 Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 7: Guidance for the assessment of conformity
$68.00 ISO 21003-1:2008 Multilayer piping systems for hot and cold water installations inside buildings - Part 1: General
$68.00 ISO 21003-5:2008 Multilayer piping systems for hot and cold water installations inside buildings - Part 5: Fitness for purpose of the system
$68.00 ISO 22391-1:2009 Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 1: General
$68.00 ISO 22391-5:2009 Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 5: Fitness for purpose of the system
$103.00 ISO/TS 22391-7:2011 Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 7: Guidance for the assessment of conformity
$68.00 ISO 6412-1:1989 Technical drawings -- Simplified representation of pipelines -- Part 1: General rules and orthogonal representation
$68.00 ISO 6412-2:1989 Technical drawings -- Simplified representation of pipelines -- Part 2: Isometric projection
$45.00 ISO 6412-3:1993 Technical drawings -- Simplified representation of pipelines -- Part 3: Terminal features of ventilation and drainage systems
$45.00 ISO 6708:1995 Pipework components -- Definition and selection of DN (nominal size)
$45.00 ISO 7268:1983 Pipe components -- Definition of nominal pressure
$19.00 ISO 7268/AMD1:1984 Amendment 1 to ISO 7268:1983
$45.00 ISO 9311-1:2005 Adhesives for thermoplastic piping systems - Part 1: Determination of film properties
$68.00 ISO 9311-2:2011 Adhesives for thermoplastic piping systems - Part 2: Determination of shear strength
$45.00 ISO 9311-3:2005 Adhesives for thermoplastic piping systems - Part 3: Test method for the determination of resistance to internal pressure
$68.00 JIS B 0011-1:1998 Technical drawings -- Simplified representation of pipelines -- Part 1: General rules and orthogonal representation
$68.00 JIS B 0011-2:1998 Technical drawings -- Simplified representation of pipelines -- Part 2: Isometric representation
$49.00 JIS B 0011-3:1998 Technical drawings -- Simplified representation of pipelines -- Part 3: Terminal features of ventilation and drainage systems
$68.00 ISO 18468:2017 Ductile iron fittings, accessories and their joints and valves - Epoxy coating