ISO 11161/Amd1:2010 - $19.00   BUY NOW

Industrial automation systems - Safety of integrated manufacturing systems - Basic requirements - Amendment 1

ISO 11161/Amd1:2010 Publication Description:

--- Abstract Source: ISO 11161/Amd1:2010 ---

ISO 11161:2007 specifies the safety requirements for integrated manufacturing systems (IMS) that incorporate two or more interconnected machines for specific applications, such as component manufacturing or assembly. It gives requirements and recommendations for the safe design, safeguarding and information for the use of such IMSs.

ISO 11161:2007 is not intended to cover safety aspects of individual machines and equipment that may be covered by standards specific to those machines and equipment. Therefore it deals only with those safety aspects that are important for the safety-relevant interconnection of the machines and components. Where machines and equipment of an integrated manufacturing system are operated separately or individually, and while the protective effects of the safeguards provided for production mode are muted or suspended, the relevant safety standards for these machines and equipment apply.

International Classification for Standards (ICS)

ICS Classification Field ICS Field Sub-Group and Number
ICS-13-Environment ICS Safety-Machinery (13.110)
ICS-25-Manufacturing ICS Industrial Automation Systems-General (25.040.01)

ICS Related Standards

Cart Document Number Document Title
$185.00 ISO 11161:2007 Safety of machinery - Integrated manufacturing systems - Basic requirements
$103.00 ISO 11553-1:2005 Safety of machinery - Laser processing machines - Part 1: General safety requirements
$138.00 ISO 11553-2:2007 Safety of machinery - Laser processing machines - Part 2: Safety requirements for hand-held laser processing devices
$68.00 ISO 11553-3:2013 Safety of machinery - Laser processing machines - Part 3: Noise reduction and noise measurement methods for laser processing machines and hand-held processing devices and associated auxiliary equipment (accuracy grade 2)
$209.00 ISO 12100:2010 Safety of machinery - General principles for design - Risk assessment and risk reduction
$103.00 ISO 13105-2:2014 Building construction machinery and equipment - Machinery for concrete surface floating and finishing - Part 2: Safety requirements and verification
$232.00 ISO 13849-1:2015 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design
$265.00 ISO 13849-1:2006 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design
$209.00 ISO 13849-2:2012 Safety of machinery - Safety-related parts of control systems - Part 2: Validation
$68.00 ISO 13850:2015 Safety of machinery - Emergency stop function - Principles for design
$51.00 ISO 13850:2006 Safety of machinery - Emergency stop - Principles for design
$138.00 ISO 13851:2002 Safety of machinery - Two-hand control devices - Functional aspects and design principles
$45.00 ISO 13854:1996 Safety of machinery - Minimum gaps to avoid crushing of parts of the human body
$185.00 ISO 13855:2010 Safety of machinery - Positioning of safeguards with respect to the approach speeds of parts of the human body
$185.00 ISO 13856-1:2013 Safety of machinery - Pressure-sensitive protective devices - Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors
$209.00 ISO 13856-2:2013 Safety of machinery - Pressure-sensitive protective devices - Part 2: General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars
$209.00 ISO 13856-3:2013 Safety of machinery - Pressure-sensitive protective devices - Part 3: General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices
$103.00 ISO 13857:2008 Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs
$103.00 ISO 14118:2000 Safety of machinery -- Prevention of unexpected start-up
$209.00 ISO 14119:2013 Safety of machinery - Interlocking devices associated with guards - Principles for design and selection
$162.00 ISO 14120:2015 Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards
$149.00 ISO 14120:2002 Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards
$185.00 ISO/TR 14121-2:2012 Safety of machinery - Risk assessment - Part 2: Practical guidance and examples of methods
$68.00 ISO 14122-1:2016 Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means and general requirements of access
$88.00 ISO 14122-1:2001 Safety of machinery -- Permanent means of access to machinery -- Part 1: Choice of fixed means of access between two levels
$22.00 ISO 14122-1/Amd1:2010 Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means of access between two levels - Amendment 1
$103.00 ISO 14122-2:2016 Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways
$88.00 ISO 14122-2:2001 Safety of machinery -- Permanent means of access to machinery -- Part 2: Working platforms and walkways
$22.00 ISO 14122-2/Amd1:2010 Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways - Amendment 1
$138.00 ISO 14122-3:2016 Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails
$123.00 ISO 14122-3:2001 Safety of machinery -- Permanent means of access to machinery -- Part 3: Stairs, stepladders and guard-rails
$22.00 ISO 14122-3/Amd1:2010 Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails - Amendment 1
$185.00 ISO 14122-4:2016 Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders
$173.00 ISO 14122-4:2004 Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders
$22.00 ISO 14122-4/Amd1:2010 Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders - Amendment 1
$68.00 ISO 14123-1:2015 Safety of machinery - Reduction of risks to health resulting from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers
$88.00 ISO 14123-1:1998 Safety of machinery - Reduction of risks to health from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers
$45.00 ISO 14123-2:2015 Safety of machinery - Reduction of risks to health resulting from hazardous substances emitted by machinery - Part 2: Methodology leading to verification procedures
$51.00 ISO 14123-2:1998 Safety of machinery - Reduction of risks to health from hazardous substances emitted by machinery - Part 2: Methodology leading to verification procedures
$162.00 ISO 14159:2002 Safety of machinery - Hygiene requirements for the design of machinery
$138.00 ISO 14738:2002 Safety of machinery -- Anthropometric requirements for the design of workstations at machinery
$68.00 ISO 15534-1:2000 Ergonomic design for the safety of machinery - Part 1: Principles for determining the dimensions required for openings for whole-body access into machinery
$138.00 ISO 15534-2:2000 Ergonomic design for the safety of machinery - Part 2: Principles for determining the dimensions required for access openings
$45.00 ISO 15534-3:2000 Ergonomic design for the safety of machinery - Part 3: Anthropometric data
$68.00 ISO 15537:2004 Principles for selecting and using test persons for testing anthropometric aspects of industrial products and designs
$240.00 ISO/TR 18569:2004 Safety of machinery - Guidelines for the understanding and use of safety of machinery standards
$162.00 ISO 19353:2015 Safety of machinery - Fire prevention and fire protection
$149.00 ISO 19353:2005 Safety of machinery - Fire prevention and protection
$68.00 ISO 21469:2006 Safety of machinery - Lubricants with incidental product contact - Hygiene requirements
$103.00 ISO/TR 22100-1:2015 Safety of machinery - Relationship with ISO 12100 - Part 1: How ISO 12100 relates to type-B and type-C standards
$45.00 ISO/TR 22100-2:2013 Safety of machinery - Relationship with ISO 12100 - Part 2: How ISO 12100 relates to ISO 13849-1
$185.00 ISO/TR 22100-3:2016 Safety of machinery - Relationship with ISO 12100 - Part 3: Implementation of ergonomic principles in safety standards
$103.00 ISO/TR 23849:2010 Guidance on the application of ISO 13849-1 and IEC 62061 in the design of safety-related control systems for machinery
$138.00 ISO/TR 24119:2015 Safety of machinery - Evaluation of fault masking serial connection of interlocking devices associated with guards with potential free contacts
$68.00 ISO 29042-1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 1: Selection of test methods
$68.00 ISO 29042-2:2009 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 2: Tracer gas method for the measurement of the emission rate of a given pollutant
$68.00 ISO 29042-3:2009 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 3: Test bench method for the measurement of the emission rate of a given pollutant
$68.00 ISO 29042-4:2009 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 4: Tracer method for the measurement of the capture efficiency of an exhaust system
$45.00 ISO 29042-5:2010 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 5: Test bench method for the measurement of the separation efficiency by mass of air cleaning systems with unducted outlet
$45.00 ISO 29042-6:2010 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 6: Test bench method for the measurement of the separation efficiency by mass of air cleaning systems with ducted outlet
$45.00 ISO 29042-7:2010 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 7: Test bench method for the measurement of the pollutant concentration parameter
$45.00 ISO 29042-8:2011 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 8: Room method for the measurement of the pollutant concentration parameter
$68.00 ISO 29042-9:2011 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 9: Decontamination index
$138.00 ISO Guide 78:2012 Safety of machinery - Rules for drafting and presentation of safety standards
$49.00 JIS B 9703:2011 Safety of machinery -- Emergency stop -- Principles for design
$339.00 JIS B 9704-3:2011 Safety of machinery -- Electro-sensitive protective equipment -- Part 3: Particular requirements for Active Opto-electronic Protective Devices responsive to Diffuse Reflection (AOPDDR)
$242.00 JIS B 9705-1:2011 Safety of machinery -- Safety-related parts of control systems -- Part 1: General principles for design
$145.00 JIS B 9706-1:2009 Safety of machinery -- Indication, marking and actuation -- Part 1: Requirements for visual, acoustic and tactile signals
$58.00 JIS B 9706-2:2009 Safety of machinery -- Indication, marking and actuation -- Part 2: Requirements for marking
$58.00 JIS B 9706-3:2009 Safety of machinery -- Indication, marking and actuation -- Part 3: Requirements for the location and operation of actuators
$68.00 JIS B 9709-1:2001 Safety of machinery -- Reduction of risks to health from hazardous substances emitted by machinery -- Part 1: Principles and specifications for machinery manufacturers
$49.00 JIS B 9709-2:2001 Safety of machinery -- Reduction of risks to health from hazardous substances emitted by machinery -- Part 2: Methodology leading to verification procedures
$49.00 JIS B 9711:2002 Safety of machinery -- Minimum gaps to avoid crushing of parts of the human body
$68.00 JIS B 9713-1:2004 Safety of machinery -- Permanent means of access to machinery -- Part 1: Choice of a fixed means of access between two levels
$68.00 JIS B 9713-2:2004 Safety of machinery -- Permanent means of access to machinery -- Part 2: Working platforms and walkways
$107.00 JIS B 9713-3:2004 Safety of machinery -- Permanent means of access to machinery -- Part 3: Stairs, stepladders and guard-rails
$68.00 JIS B 9713-4:2004 Safety of machinery -- Permanent means of access to machinery -- Part 4: Fixed ladders
$145.00 JIS B 9717-1:2011 Safety of machinery -- Pressure-sensitive protective devices -- Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors
$116.00 JIS B 9960-11:2004 Safety of machinery -- Electrical equipment of machines -- Part 11: Requirements for HV equipment for voltages above 1000V a.c. or 1500V d.c. and not exceeding 36kV
$15.00 JIS B 9960-1:2008/AMENDMENT 1:2011 Safety of machinery -- Electrical equipment of machines -- Part 1: General requirements (Amendment 1)
$68.00 JIS B 9960-31:2004 Safety of machinery -- Electrical equipment of machines -- Part 31: Particular safety and EMC requirements for sewing machines, units and systems
$185.00 ISO 19085-1:2017 Woodworking machines - Safety - Part 1: Common requirements
$162.00 ISO 19085-2:2017 Woodworking machines - Safety - Part 2: Horizontal beam panel circular sawing machines
$185.00 ISO 19085-5:2017 Woodworking machines - Safety - Part 5: Dimension saws
$232.00 ISO/TR 11065:1992 Industrial automation glossary
$185.00 ISO 11161:2007 Safety of machinery - Integrated manufacturing systems - Basic requirements
$162.00 ISO 11354-1:2011 Advanced automation technologies and their applications - Requirements for establishing manufacturing enterprise process interoperability - Part 1: Framework for enterprise interoperability
$103.00 ISO 11354-2:2015 Advanced automation technologies and their applications - Requirements for establishing manufacturing enterprise process interoperability - Part 2: Maturity model for assessing enterprise interoperability
$209.00 ISO/TR 13283:1998 Industrial automation - Time-critical communications architectures - User requirements and network management for time-critical communications systems
$103.00 ISO 14258:1998 Industrial automation systems - Concepts and rules for enterprise models
$185.00 ISO 15704:2000 Industrial automation systems -- Requirements for entreprise-reference architectures and methodologies
$19.00 ISO 15704/Amd1:2005 Industrial automation systems - Requirements for entreprise-reference architectures and methodologies - Amendment 1: Additional views for user concerns
$185.00 ISO 16100-1:2009 Industrial automation systems and integration - Manufacturing software capability profiling for interoperability - Part 1: Framework
$103.00 ISO 16100-2:2003 Industrial automation systems and integration - Manufacturing software capability profiling for interoperability - Part 2: Profiling methodology
$209.00 ISO 16100-3:2005 Industrial automation systems and integration - Manufacturing software capability profiling for interoperability - Part 3: Interface services, protocols and capability templates
$162.00 ISO 16100-4:2006 Industrial automation systems and integration - Manufacturing software capability profiling for interoperability - Part 4: Conformance test methods, criteria and reports
$185.00 ISO 16100-5:2009 Industrial automation systems and integration - Manufacturing software capability profiling for interoperability - Part 5: Methodology for profile matching using multiple capability class structures
$209.00 ISO 16100-6:2011 Industrial automation systems and integration - Manufacturing software capability profiling for interoperability - Part 6: Interface services and protocols for matching profiles based on multiple capability class structures
$185.00 ISO/TR 18161:2013 Automation systems and integration - Applications integration approach using information exchange requirements modelling and software capability profiling
$185.00 ISO 20140-1:2013 Automation systems and integration - Evaluating energy efficiency and other factors of manufacturing systems that influence the environment - Part 1: Overview and general principles
$138.00 ISO 22400-1:2014 Automation systems and integration - Key performance indicators (KPIs) for manufacturing operations management - Part 1: Overview, concepts and terminology
$209.00 ISO 22400-2:2014 Automation systems and integration - Key performance indicators (KPIs) for manufacturing operations management - Part 2: Definitions and descriptions
$68.00 ISO 23570-1:2005 Industrial automation systems and integration - Distributed installation in industrial applications - Part 1: Sensors and actuators
$162.00 ISO 23570-2:2005 Industrial automation systems and integration - Distributed installation in industrial applications - Part 2: Hybrid communication bus
$185.00 ISO 23570-3:2009 Industrial automation systems and integration - Distributed installation in industrial applications - Part 3: Power distribution bus
$103.00 ISO/IEC Guide 75:2006 Strategic principles for future IEC and ISO standardization in industrial automation
$232.00 ISO/PAS 19450:2015 Automation systems and integration - Object-Process Methodology
$174.00 JIS B 3521:2004 Protocol specification for FA control network standard
$209.00 ISO 20140-5:2017 Automation systems and integration - Evaluating energy efficiency and other factors of manufacturing systems that influence the environment - Part 5: Environmental performance evaluation data
$19.00 ISO 22400-2:2014/Amd1:2017 - Amendment 1: Key performance indicators for energy management
$138.00 ISO 16300-3:2017 Automation systems and integration - Interoperability of capability units for manufacturing application solutions - Part 3: Verification and validation of interoperability among capability units