ISO 10865-2:2015 - $162.00   BUY NOW

Wheelchair containment and occupant retention systems for accessible transport vehicles designed for use by both sitting and standing passengers - Part 2: Systems for forward-facing wheelchair-seated passengers

ISO 10865-2:2015 Publication Description:

ISO 10865-2:2015 applies to wheelchair passenger spaces that are intended for use by passengers with a body mass greater than 22 kg who remain in their wheelchairs when travelling facing forward in accessible transport vehicles designed to transport both standing and sitting passengers on fixed-route service. It assumes that the maximum acceleration imparted to the vehicle during emergency driving manoeuvres will not exceed 1 g in any direction and rarely exceeds 3 g in frontal crashes. For the purposes of this part of ISO 10865, the term wheelchair includes manual and powered wheelchairs, and three and four wheeled scooters.

ISO 10865-2:2015 specifies performance requirements and associated test methods, design requirements, requirements for manufacturer instructions and warnings to installers, wheelchair users, and vehicle operators, and requirements for product labelling and disclosure of test information.

The provisions of this part of ISO 10865 apply primarily to a complete forward-facing wheelchair passenger space (FF-WPS), but subsets of the provisions can be applied to components and subassemblies sold separately, as appropriate to the specific functions of the components and/or subassemblies they are intended to replace.

International Classification for Standards (ICS)

ICS Classification Field ICS Field Sub-Group and Number
ICS-11-Health ICS Aids-for Moving (11.180.10)
ICS-43-Road ICS Passenger Cars Caravans Light Trailers (43.100)

ICS Related Standards

Cart Document Number Document Title
$185.00 ISO 10535:2006 Hoists for the transfer of disabled persons - Requirements and test methods
$209.00 ISO 10542-1:2012 Technical systems and aids for disabled or handicapped persons - Wheelchair tiedown and occupant-restraint systems - Part 1: Requirements and test methods for all systems
$162.00 ISO 10865-1:2012 Wheelchair containment and occupant retention systems for accessible transport vehicles designed for use by both sitting and standing passengers - Part 1: Systems for rearward-facing wheelchair-seated passengers
$103.00 ISO 11199-1:1999 Walking aids manipulated by both arms -- Requirements and test methods -- Part 1: Walking frames
$138.00 ISO 11199-2:2005 Walking aids manipulated by both arms - Requirements and test methods - Part 2: Rollators
$138.00 ISO 11199-3:2005 Walking aids manipulated by both arms - Requirements and test methods - Part 3: Walking tables
$103.00 ISO 11334-1:2007 Assistive products for walking manipulated by one arm - Requirements and test methods - Part 1: Elbow crutches
$103.00 ISO 11334-4:1999 Walking aids manipulated by one arm -- Requirements and test methods -- Part 4: Walking sticks with three or more legs
$209.00 ISO/TR 13570-1:2005 Wheelchairs - Part 1: Guidelines for the application of the ISO 7176 series on wheelchairs
$162.00 ISO/TR 13570-2:2014 Wheelchairs - Part 2: Typical values and recommended limits of dimensions, mass and manoeuvring space as determined in ISO 7176-5
$209.00 ISO 16840-1:2006 Wheelchair seating - Part 1: Vocabulary, reference axis convention and measures for body segments, posture and postural support surfaces
$103.00 ISO 16840-10:2014 Wheelchairs - Resistance to ignition of non-integrated seat and back support cushions - Part 10: Requirements and test methods
$45.00 ISO/TS 16840-11:2014 Wheelchair seating - Part 11: Determination of perspiration dissipation characteristics of seat cushions intended to manage tissue integrity
$103.00 ISO/TS 16840-12:2015 Wheelchair seating - Part 12: Apparatus and method for cushion envelopment testing
$138.00 ISO 16840-2:2007 Wheelchair seating - Part 2: Determination of physical and mechanical characteristics of devices intended to manage tissue integrity - Seat cushions
$162.00 ISO 16840-3:2014 Wheelchair seating - Part 3: Determination of static, impact and repetitive load strengths for postural support devices
$185.00 ISO 16840-4:2009 Wheelchair seating - Part 4: Seating systems for use in motor vehicles
$162.00 ISO 16840-6:2015 Wheelchair seating - Part 6: Simulated use and determination of the changes in properties of seat cushions
$103.00 ISO/TR 16840-9:2015 Wheelchair seating - Part 9: Clinical interface pressure mapping guidelines for seating
$68.00 ISO 24415-1:2009 Tips for assistive products for walking - Requirements and test methods - Part 1: Friction of tips
$45.00 ISO 24415-2:2011 Tips for assistive products for walking - Requirements and test methods - Part 2: Durability of tips for crutches
$162.00 ISO 7176-1:2014 Wheelchairs - Part 1: Determination of static stability
$108.00 ISO 7176-1:1999 Wheelchairs -- Part 1: Determination of static stability
$45.00 ISO 7176-10:2008 Wheelchairs - Part 10: Determination of obstacle-climbing ability of electrically powered wheelchairs
$162.00 ISO 7176-11:2012 Wheelchairs - Part 11: Test dummies
$45.00 ISO 7176-13:1989 Wheelchairs -- Part 13: Determination of coefficient of friction of test surfaces
$209.00 ISO 7176-14:2008 Wheelchairs - Part 14: Power and control systems for electrically powered wheelchairs and scooters - Requirements and test methods
$68.00 ISO 7176-15:1996 Wheelchairs -- Part 15: Requirements for information disclosure, documentation and labelling
$68.00 ISO 7176-16:2012 Wheelchairs - Part 16: Resistance to ignition of postural support devices
$185.00 ISO 7176-19:2008 Wheelchairs - Part 19: Wheeled mobility devices for use as seats in motor vehicles
$19.00 ISO 7176-19:2008/Amd1:2015 - Amendment 1: Annex G
$103.00 ISO 7176-2:2001 Wheelchairs -- Part 2: Determination of dynamic stability of electric wheelchairs
$138.00 ISO 7176-21:2009 Wheelchairs - Part 21: Requirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and scooters, and battery chargers
$162.00 ISO 7176-22:2014 Wheelchairs - Part 22: Set-up procedures
$99.00 ISO 7176-22:2000 Wheelchairs -- Part 22: Set-up procedures
$103.00 ISO 7176-25:2013 Wheelchairs - Part 25: Batteries and chargers for powered wheelchairs
$185.00 ISO 7176-26:2007 Wheelchairs - Part 26: Vocabulary
$232.00 ISO 7176-28:2012 Wheelchairs - Part 28: Requirements and test methods for stair-climbing devices
$103.00 ISO 7176-3:2012 Wheelchairs - Part 3: Determination of effectiveness of brakes
$68.00 ISO 7176-4:2008 Wheelchairs - Part 4: Energy consumption of electric wheelchairs and scooters for determination of theoretical distance range
$209.00 ISO 7176-5:2008 Wheelchairs - Part 5: Determination of dimensions, mass and manoeuvring space
$45.00 ISO 7176-6:2001 Wheelchairs - Part 6: Determination of maximum speed, acceleration and deceleration of electric wheelchairs
$185.00 ISO 7176-7:1998 Wheelchairs -- Part 7: Measurement of seating and wheel dimensions
$209.00 ISO 7176-8:2014 Wheelchairs - Part 8: Requirements and test methods for static, impact and fatigue strengths
$211.00 ISO 7176-8:1998 Wheelchairs -- Part 8: Requirements and test methods for static, impact and fatigue strengths
$68.00 ISO 7176-9:2009 Wheelchairs - Part 9: Climatic tests for electric wheelchairs
$209.00 ISO 9386-1:2000 Power-operated lifting platforms for persons with impaired mobility -- Rules for safety, dimensions and functional operation -- Part 1: Vertical lifting platforms
$209.00 ISO 9386-2:2000 Power-operated lifting platforms for persons with impaired mobility -- Rules for safety, dimensions and functional operation -- Part 2: Powered stairlifts for seated, standing and wheelchair users moving in an inclined plane
$58.00 JIS T 0901:2011 Guidelines for older persons and persons with disabilities -- Information presentation using electronic guiding and wayfinding system
$162.00 ISO 10865-1:2012 Wheelchair containment and occupant retention systems for accessible transport vehicles designed for use by both sitting and standing passengers - Part 1: Systems for rearward-facing wheelchair-seated passengers
$103.00 ISO/TR 10982:2013 Road vehicles - Test procedures for evaluating out-of-position vehicle occupant interactions with deploying air bags
$88.00 ISO 10997:1996 Passenger vehicles - Side impact with deformable moving barrier - Full scale test
$68.00 ISO 11555-1:2003 Road vehicles - Stabilizing devices for caravans and light trailers - Part 1: Integrated stabilizers
$45.00 ISO 13052:2013 Road vehicles - Trailers up to 3,5 t - Requirements for jockey wheels and drawbar supports
$103.00 ISO 15037-1:2006 Road vehicles - Vehicle dynamics test methods - Part 1: General conditions for passenger cars
$68.00 ISO 17288-1:2011 Passenger cars - Free-steer behaviour - Part 1: Steering-release open-loop test method
$103.00 ISO 17288-2:2011 Passenger cars - Free-steer behaviour - Part 2: Steering-pulse open-loop test method
$45.00 ISO 18207:2006 Road vehicles - Trailers up to 3,5 t - Control of welded towing brackets for coupling ball after fatigue testing
$103.00 ISO 19364:2016 Passenger cars - Vehicle dynamic simulation and validation - Steady-state circular driving behaviour
$68.00 ISO 19365:2016 Passenger cars - Validation of vehicle dynamic simulation - Sine with dwell stability control testing
$45.00 ISO 2416:1992 Passenger cars - Mass distribution
$45.00 ISO 3888-1:1999 Passenger cars - Test track for a severe lane-change manoeuvre - Part 1: Double lane-change
$45.00 ISO 3888-2:2011 Passenger cars - Test track for a severe lane-change manoeuvre - Part 2: Obstacle avoidance
$103.00 ISO 3984:2004 Road vehicles - Rear moving barrier impact test procedure
$138.00 ISO 4131:1979 Road vehicles - Dimensional codes for passenger cars
$138.00 ISO 4138:2012 Passenger cars - Steady-state circular driving behaviour - Open-loop test methods
$45.00 ISO 7237:1993 Caravans - Masses and dimensions - Vocabulary
$19.00 ISO 7237/Amd1:2001 Road vehicles - Masses and dimensions of caravans - Terms and definitions - Amendment 1
$45.00 ISO 7397-1:1993 Passenger cars - Verification of drivers direct field of view - Part 1: Vehicle positioning for static measurement'
$103.00 ISO 7397-2:1993 Passenger cars - Verification of drivers direct field of view - Part 2: Test method'
$138.00 ISO 7975:2006 Passenger cars - Braking in a turn - Open-loop test method
$138.00 ISO 8936:2017 Awnings for leisure accommodation vehicles - Requirements and test methods
$123.00 ISO 8936:2007 Awnings for leisure accommodation vehicles - Requirements and test methods
$103.00 ISO 9815:2010 Road vehicles - Passenger-car and trailer combinations - Lateral stability test
$138.00 ISO 9816:2006 Passenger cars - Power-off reaction of a vehicle in a turn - Open-loop test method