ISO 10619-3:2011 - $45.00   BUY NOW

Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures

ISO 10619-3:2011 Publication Description:

ISO 10619-3:2011 specifies a method for the determination of the bending characteristics of rubber and plastics hoses and tubing, including the force required for bending, over a range of temperatures from -60 ºC to +200 ºC. The nature of the apparatus, however, limits its applicability to rubber and plastics hoses and tubing of small internal diameter, i.e. up to 12,5 mm.

International Classification for Standards (ICS)

ICS Classification Field ICS Field Sub-Group and Number
ICS-23-Fluid ICS Hoses/Hose Assemblies (23.040.70)

ICS Related Standards

Cart Document Number Document Title
$185.00 ISO 10380:2012 Pipework - Corrugated metal hoses and hose assemblies
$68.00 ISO 10619-1:2011 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 1: Bending tests at ambient temperature
$68.00 ISO 10619-2:2011 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures
$138.00 ISO 10806:2003 Pipework - Fittings for corrugated metal hoses
$45.00 ISO 10960:1994 Rubber and plastics hoses - Assessment of ozone resistance under dynamic conditions
$103.00 ISO 12151-1:2010 Connections for hydraulic fluid power and general use - Hose fittings - Part 1: Hose fittings with ISO 8434-3 O-ring face seal ends
$19.00 ISO 12151-1:2010/Amd1:2017 - Amendment 1
$103.00 ISO 12151-2:2003 Connections for hydraulic fluid power and general use - Hose fittings - Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24 degree cone connector ends with O-rings
$68.00 ISO 12151-3:2010 Connections for hydraulic fluid power and general use - Hose fittings - Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends
$68.00 ISO 12151-4:2007 Connections for hydraulic fluid power and general use - Hose fittings - Part 4: Hose fittings with ISO 6149 metric stud ends
$68.00 ISO 12151-5:2007 Connections for hydraulic fluid power and general use - Hose fittings - Part 5: Hose fittings with ISO 8434-2 37 degree flared ends
$68.00 ISO 12151-6:2009 Connections for hydraulic fluid power and general use - Hose fittings - Part 6: Hose fittings with ISO 8434-6 60 degree cone ends
$45.00 ISO 1307:2006 Rubber and plastics hoses - Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses
$68.00 ISO 1402:2009 Rubber and plastics hoses and hose assemblies - Hydrostatic testing
$45.00 ISO 1403:2005 Rubber hoses, textile-reinforced, for general-purpose water applications - Specification
$123.00 ISO 15348:2002 Pipework - Metal bellows expansion joints - General
$103.00 ISO 15465:2004 Pipework - Stripwound metal hoses and hose assemblies
$138.00 ISO 17165-1:2007 Hydraulic fluid power - Hose assemblies - Part 1: Dimensions and requirements
$103.00 ISO/TS 17165-2:2013 Hydraulic fluid power - Hose assemblies - Part 2: Practices for hydraulic hose assemblies
$209.00 ISO/TR 17784:2003 Rubber and plastics hoses and hose assemblies - Guide for use by purchasers, assemblers, installers and operating personnel
$103.00 ISO 18752:2014 Rubber hoses and hose assemblies - Wire- or textile-reinforced single-pressure types for hydraulic applications - Specification
$68.00 ISO 2398:2016 Rubber hoses, textile-reinforced, for compressed air - Specification
$51.00 ISO 2398:2006 Rubber hoses, textile-reinforced, for compressed air - Specification
$45.00 ISO 28702:2008 Rubber and plastics hoses and tubing - Textile-reinforced types - Sub-ambient temperature crush test
$138.00 ISO 30013:2011 Rubber and plastics hoses - Methods of exposure to laboratory light sources - Determination of changes in colour, appearance and other physical properties
$103.00 ISO 3994:2014 Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification
$108.00 ISO 3994:2007 Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification
$68.00 ISO 4023:2009 Rubber hoses and hose assemblies for steam - Test methods
$68.00 ISO 4080:2009 Rubber and plastics hoses and hose assemblies - Determination of permeability to gas
$68.00 ISO 4641:2016 Rubber hoses and hose assemblies for water suction and discharge - Specification
$88.00 ISO 4641:2010 Rubber hoses and hose assemblies for water suction and discharge - Specification
$68.00 ISO 4671:2007 Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies
$19.00 ISO 4671/Amd1:2011 Rubber and plastics hose and hose assemblies - Methods of measurement of dimensions - Amendment 1: Clarification of position at which outside diameter is measured
$103.00 ISO 5774:2016 Plastics hoses - Textile-reinforced types for compressed-air applications - Specification
$123.00 ISO 5774:2006 Plastics hoses - Textile-reinforced types for compressed-air applications - Specification
$68.00 ISO 6134:2017 Rubber hoses and hose assemblies for saturated steam - Specification
$123.00 ISO 6134:2005 Rubber hoses and hose assemblies for saturated steam - Specification
$68.00 ISO 6224:2011 Thermoplastics hoses, textile-reinforced, for general-purpose water applications - Specification
$45.00 ISO 6801:1983 Rubber or plastics hoses - Determination of volumetric expansion
$19.00 ISO 6801/Amd1:2011 Rubber or plastics hoses - Determination of volumetric expansion - Amendment 1: Deletion of alcohol as pressurizing fluid
$45.00 ISO 6802:2005 Rubber and plastics hoses and hose assemblies with wire reinforcements - Hydraulic impulse test with flexing
$45.00 ISO 6803:2008 Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing
$45.00 ISO 7233:2016 Rubber and plastics hoses and hose assemblies - Determination of resistance to vacuum
$51.00 ISO 7233:2006 Rubber and plastics hoses and hose assemblies - Determination of resistance to vacuum
$68.00 ISO 7326:2016 Rubber and plastics hoses - Assessment of ozone resistance under static conditions
$88.00 ISO 7326:2006 Rubber and plastics hoses - Assessment of ozone resistance under static conditions
$103.00 ISO 7369:2004 Pipework - Metal hoses and hose assemblies - Vocabulary
$45.00 ISO 7662:1988 Rubber and plastics hoses - Determination of abrasion of lining
$45.00 ISO 7751:2016 Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to maximum working pressure
$51.00 ISO 7751:1991 Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to design working pressure
$22.00 ISO 7751/Amd1:2011 Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to design working pressure - Amendment 1: Replacement of design working pressure by maximum working pressure throughout text
$103.00 ISO 8029:2014 Plastics hose - General-purpose collapsible water hose, textile-reinforced - Specification
$99.00 ISO 8029:2007 Plastics hose - General-purpose collapsible water hose, textile-reinforced - Specification
$68.00 ISO 8030:2014 Rubber and plastics hoses - Method of test for flammability
$58.00 ISO 8030:1995 Rubber and plastics hoses - Method of test for flammability
$103.00 ISO 8031:2009 Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity
$45.00 ISO 8032:1997 Rubber and plastics hose assemblies - Flexing combined with hydraulic impulse test (half-omega test)
$103.00 ISO 8033:2016 Rubber and plastics hoses - Determination of adhesion between components
$88.00 ISO 8033:2006 Rubber and plastics hoses - Determination of adhesion between components
$68.00 ISO 8308:2015 Rubber and plastics hoses and tubing - Determination of transmission of liquids through hose and tubing walls
$88.00 ISO 8308:2006 Rubber and plastics hoses and tubing - Determination of transmission of liquids through hose and tubing walls
$45.00 ISO 8330:2014 Rubber and plastics hoses and hose assemblies - Vocabulary
$103.00 ISO 8331:2016 Rubber and plastics hoses and hose assemblies - Guidelines for selection, storage, use and maintenance
$123.00 ISO 8331:2014 Rubber and plastics hoses and hose assemblies - Guidelines for selection, storage, use and maintenance
$49.00 JIS K 6330-7:2011 Rubber and plastics hoses -- Part 7: Assessment of ozone resistance under static conditions
$68.00 ISO 6803:2017 Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing
$103.00 ISO 19385:2017 Rubber and plastics hoses and hose assemblies, wire- or textile-reinforced, for water jetting or water blasting applications - Specification