F2785-09 - $62.40   BUY NOW

Standard Specification for Polyamide 12 Gas Pressure Pipe, Tubing, and Fittings

ASTM Volume 08.04 Plastic Pipeing Systems

F2785-09 Publication Description:

This specification details the material and performance requirements, as well as the corresponding test methods, for the evaluation of polyamide 12 gas pressure pipes, tubing, and fittings that are intended for use in the distribution of natural gas in fuel gas mains and services for direct burial and reliner applications. It does not apply to threaded pipes. The pipes and fittings shall be made from virgin or reworked polyamide material that satisfies the short- and long-term hydrostatic design stress and hydrostatic design basis ratings, and rapid crack propagation (RCP) resistance properties. Properly sampled pipe and fitting specimens shall undergo test procedures and conform to the following requirements: workmanship; dimension (diameter, toe-in, wall thickness, wall thickness eccentricity range, ovality, and length); conditioning; slow crack growth resistance; resistance to RCP; minimum hydrostatic burst pressure/apparent tensile strength (quick burst); sustained pressure; outdoor storage stability; chemical resistance; elevated temperature service; butt fusion joints; butt heat fusion fittings; electrofusion fittings; mechanical fittings; transition fittings and anodeless risers; valves; and excess flow valves.

International Classification for Standards (ICS)

ICS Classification Field ICS Field Sub-Group and Number
ICS-23-Fluid ICS Plastics Pipes (23.040.20)
ICS-23-Fluid ICS Plastics Fittings (23.040.45)

ICS Related Standards

Cart Document Number Document Title
$55.20 D1527-99(2005) Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe, Schedules 40 and 80 (Withdrawn 2014)
$55.20 D1527-99e1 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe, Schedules 40 and 80
$55.20 D1527-99 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe, Schedules 40 and 80
$41.00 D1598-15a Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure
$49.20 D1598-15 Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure
$49.20 D1598-02(2009) Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure
$49.20 D1598-02(2008) Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure
$49.20 D1598-02 Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure
$41.00 D1599-14e1 Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings
$49.20 D1599-14 Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings
$49.20 D1599-99(2011) Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings
$49.20 D1599-99(2005) Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings
$49.20 D1599-99e1 Standard Test Method for Resistance to Short-Time Hydraulic Failure Pressure of Plastic Pipe, Tubing, and Fittings
$49.20 D1599-99 Standard Test Method for Resistance to Short-Time Hydraulic Failure Pressure of Plastic Pipe, Tubing, and Fittings
$52.00 D1785-15 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120
$62.40 D1785-12 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120
$62.40 D1785-06 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120
$62.40 D1785-05 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120
$62.40 D1785-04a Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120
$62.40 D1785-04 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120
$62.40 D1785-03 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120
$62.40 D1785-99 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120
$55.20 D2104-03 Standard Specification for Polyethylene (PE) Plastic Pipe, Schedule 40 (Withdrawn 2010)
$55.20 D2104-01 Standard Specification for Polyethylene (PE) Plastic Pipe, Schedule 40
$55.20 D2104-99e1 Standard Specification for Polyethylene (PE) Plastic Pipe, Schedule 40
$46.00 D2105-01(2014) Standard Test Method for Longitudinal Tensile Properties of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube
$55.20 D2105-01(2007)e1 Standard Test Method for Longitudinal Tensile Properties of Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube
$55.20 D2105-01 Standard Test Method for Longitudinal Tensile Properties of Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube
$55.20 D2105-97 Standard Test Method for Longitudinal Tensile Properties of Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube
$46.00 D2122-16 Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
$55.20 D2122-15 Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
$55.20 D2122-98(2010) Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
$55.20 D2122-98(2004) Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
$55.20 D2122-98e1 Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
$55.20 D2122-98 Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
$41.00 D2143-15 Standard Test Method for Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe
$49.20 D2143-00(2010) Standard Test Method for Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe
$49.20 D2143-00(2005)e1 Standard Test Method for Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe
$49.20 D2143-00 Standard Test Method for Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe
$49.20 D2143-94 Standard Test Method for Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe
$41.00 D2152-13 Standard Test Method for Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion
$49.20 D2152-95(2010) Standard Test Method for Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion
$49.20 D2152-95(2003) Standard Test Method for Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion
$49.20 D2152-95 Standard Test Method for Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion
$46.00 D2239-12a Standard Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter
$55.20 D2239-12 Standard Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter
$55.20 D2239-03 Standard Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter
$55.20 D2239-01 Standard Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter
$55.20 D2239-99 Standard Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter
$46.00 D2241-15 Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)
$55.20 D2241-09 Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)
$55.20 D2241-05 Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)
$55.20 D2241-04b Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)
$55.20 D2241-04a Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)
$55.20 D2241-04 Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)
$55.20 D2241-00 Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)
$55.20 D2282-99(2005) Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Withdrawn 2007)
$55.20 D2282-99e1 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (SDR-PR)
$55.20 D2282-99 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (SDR-PR)
$49.20 D2310-06(2012) Standard Classification for Machine-Made “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe (Withdrawn 2017)
$49.20 D2310-06 Standard Classification for Machine-Made Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
$49.20 D2310-01 Standard Classification for Machine-Made Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
$49.20 D2310-97 Standard Classification for Machine-Made Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
$52.00 D2321-14e1 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
$62.40 D2321-14 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
$62.40 D2321-11 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
$62.40 D2321-09 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
$62.40 D2321-08 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
$62.40 D2321-05 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
$62.40 D2321-04e1 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
$62.40 D2321-04 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
$55.20 D2321-00 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
$46.00 D2412-11 Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading
$55.20 D2412-10a Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading
$55.20 D2412-10 Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading
$55.20 D2412-02(2008) Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading
$55.20 D2412-02 Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading
$55.20 D2412-96a Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading
$46.00 D2444-99(2010) Standard Test Method for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)
$55.20 D2444-99(2005) Standard Test Method for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)
$55.20 D2444-99 Standard Test Method for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)
$55.20 D2447-03 Standard Specification for Polyethylene (PE) Plastic Pipe, Schedules 40 and 80, Based on Outside Diameter (Withdrawn 2010)
$55.20 D2447-01 Standard Specification for Polyethylene (PE) Plastic Pipe, Schedules 40 and 80, Based on Outside Diameter
$55.20 D2447-99 Standard Specification for Polyethylene (PE) Plastic Pipe, Schedules 40 and 80, Based on Outside Diameter
$52.00 D2513-16a Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
$62.40 D2513-16 Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
$62.40 D2513-14e1 Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
$62.40 D2513-14 Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
$62.40 D2513-12ae1 Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
$62.40 D2513-12a Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
$62.40 D2513-12 Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
$62.40 D2513-11c Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
$62.40 D2513-11b Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
$62.40 D2513-11a Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
$62.40 D2513-11e1 Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
$62.40 D2513-11 Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
$62.40 D2513-09a Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
$80.40 D2513-09 Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
$80.40 D2513-08b Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
$80.40 D2513-08a Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
$80.40 D2513-08 Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
$80.40 D2513-07b Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
$80.40 D2513-07a Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
$80.40 D2513-07 Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
$80.40 D2513-06b Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
$80.40 D2513-06a Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
$80.40 D2513-06 Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
$80.40 D2513-05 Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
$80.40 D2513-04a Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
$80.40 D2513-04 Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
$80.40 D2513-03b Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
$80.40 D2513-03a Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
$80.40 D2513-03 Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
$80.40 D2513-01ae1 Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
$80.40 D2513-01 Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
$62.40 D2513-00 Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
$62.40 D2513-99 Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
$55.20 D2517-06 Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings
$55.20 D2517-05 Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings
$55.20 D2517-00e1 Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings
$55.20 D2517-00 Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings
$46.00 D2564-12 Standard Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems
$55.20 D2564-04(2009)e1 Standard Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems
$55.20 D2564-04e1 Standard Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems
$55.20 D2564-04 Standard Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems
$49.20 D2564-96a Standard Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems
$49.20 D2564-91a Standard Specification for Solvent Cements for Poly (Vinyl Chloride) (PVC) Plastic Piping Systems
$49.20 D2564-91 Standard Specification for Solvent Cements for Poly (Vinyl Chloride) (PVC) Plastic Piping Systems
$46.00 D2661-14 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings
$55.20 D2661-11 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings
$55.20 D2661-08 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings
$55.20 D2661-06 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings
$55.20 D2661-02 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings
$55.20 D2661-01 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings
$55.20 D2661-00 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings
$55.20 D2661-97ae1 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings
$55.20 D2661-91 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings
$46.00 D2665-14 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
$55.20 D2665-12 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
$55.20 D2665-11 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
$55.20 D2665-10 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
$55.20 D2665-09 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
$55.20 D2665-08b Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
$55.20 D2665-08a Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
$55.20 D2665-08 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
$55.20 D2665-07 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
$55.20 D2665-04ae2 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
$55.20 D2665-04ae1 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
$55.20 D2665-04a Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
$55.20 D2665-04 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
$55.20 D2665-02ae1 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
$55.20 D2665-02a Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
$55.20 D2665-01 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
$55.20 D2665-02 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
$55.20 D2665-00 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
$55.20 D2665-91b Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
$55.20 D2665-91a Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
$55.20 D2665-91 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
$46.00 D2680-01(2014) Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping
$55.20 D2680-01(2009) Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping
$55.20 D2680-01 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping
$55.20 D2729-11 Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
$55.20 D2729-03 Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
$55.20 D2729-96a Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
$46.00 D2737-12a Standard Specification for Polyethylene (PE) Plastic Tubing
$55.20 D2737-12e1 Standard Specification for Polyethylene (PE) Plastic Tubing
$55.20 D2737-12 Standard Specification for Polyethylene (PE) Plastic Tubing
$55.20 D2737-03 Standard Specification for Polyethylene (PE) Plastic Tubing
$55.20 D2737-01 Standard Specification for Polyethylene (PE) Plastic Tubing
$55.20 D2737-99 Standard Specification for Polyethylene (PE) Plastic Tubing
$55.20 D2751-05 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Sewer Pipe and Fittings (Withdrawn 2014)
$55.20 D2751-96a Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Sewer Pipe and Fittings
$46.00 D2774-12 Standard Practice for Underground Installation of Thermoplastic Pressure Piping
$55.20 D2774-08 Standard Practice for Underground Installation of Thermoplastic Pressure Piping
$55.20 D2774-04e1 Standard Practice for Underground Installation of Thermoplastic Pressure Piping
$55.20 D2774-04 Standard Practice for Underground Installation of Thermoplastic Pressure Piping
$55.20 D2774-01 Standard Practice for Underground Installation of Thermoplastic Pressure Piping
$55.20 D2774-94 Standard Practice for Underground Installation of Thermoplastic Pressure Piping
$62.40 D2846/D2846M-14 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems
$62.40 D2846/D2846M-09be1 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems
$62.40 D2846/D2846M-09b Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems
$62.40 D2846/D2846M-09 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems
$62.40 D2846/D2846M-06 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems
$62.40 D2846/D2846M-99e1 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems
$62.40 D2846-92a Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems
$55.20 D2846-92 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems
$46.00 D2852-16 Standard Specification for Styrene-Rubber (SR) Plastic Drain Pipe and Fittings
$55.20 D2852-95(2008) Standard Specification for Styrene-Rubber (SR) Plastic Drain Pipe and Fittings
$55.20 D2852-95 Standard Specification for Styrene-Rubber (SR) Plastic Drain Pipe and Fittings
$55.20 D2852-95(2002) Standard Specification for Styrene-Rubber (SR) Plastic Drain Pipe and Fittings
$49.20 D2924-12 Standard Test Method for External Pressure Resistance of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
$49.20 D2924-01(2006) Standard Test Method for External Pressure Resistance of Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
$49.20 D2924-01 Standard Test Method for External Pressure Resistance of Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
$49.20 D2924-99 Standard Test Method for External Pressure Resistance of Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
$41.00 D2925-14 Standard Test Method for Beam Deflection of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Pipe Under Full Bore Flow
$49.20 D2925-01(2007)e1 Standard Test Method for Beam Deflection of Fiberglass (Glass-Fiber-Reinforced Thermosetting Resin) Pipe Under Full Bore Flow
$49.20 D2925-01 Standard Test Method for Beam Deflection of Fiberglass (Glass-Fiber-Reinforced Thermosetting Resin) Pipe Under Full Bore Flow
$49.20 D2925-95(2000)e1 Standard Test Method for Beam Deflection of Fiberglass (Glass-Fiber-Reinforced Thermosetting Resin) Pipe Under Full Bore Flow
$46.00 D2949-10 Standard Specification for 3.25-in. Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
$55.20 D2949-01a(2008)e1 Standard Specification for 3.25-in. Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
$55.20 D2949-01a(2008) Standard Specification for 3.25-in. Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
$55.20 D2949-01ae1 Standard Specification for 3.25-in. Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
$55.20 D2949-01a Standard Specification for 3.25-in. Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
$55.20 D2949-01 Standard Specification for 3.25-in. Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
$55.20 D2949-00 Standard Specification for 3.25-in. Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
$52.00 D2992-12 Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings
$62.40 D2992-06 Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings
$62.40 D2992-01 Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings
$62.40 D2992-96e1 Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings
$55.20 D2996-15 Standard Specification for Filament-Wound “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
$55.20 D2996-01(2007)e1 Standard Specification for Filament-Wound Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
$55.20 D2996-01 Standard Specification for Filament-Wound Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
$55.20 D2996-00 Standard Specification for Filament-Wound Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
$55.20 D2996-95 Standard Specification for Filament-Wound Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
$46.00 D2997-15 Standard Specification for Centrifugally Cast “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
$55.20 D2997-01(2007)e1 Standard Specification for Centrifugally Cast Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
$55.20 D2997-01 Standard Specification for Centrifugally Cast Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
$55.20 D2997-99 Standard Specification for Centrifugally Cast Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
$52.00 D3034-16 Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
$62.40 D3034-15e1 Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
$62.40 D3034-15 Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
$62.40 D3034-14a Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
$62.40 D3034-14 Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
$55.20 D3034-08 Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
$55.20 D3034-06 Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
$62.40 D3034-04a Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
$62.40 D3034-04 Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
$55.20 D3034-00 Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
$46.00 D3035-15 Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter
$55.20 D3035-14a Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter
$55.20 D3035-14 Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter
$55.20 D3035-12e2 Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter
$55.20 D3035-12e1 Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter
$55.20 D3035-12 Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter
$55.20 D3035-10 Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter
$55.20 D3035-08 Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter
$55.20 D3035-03a Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter
$55.20 D3035-03 Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter
$55.20 D3035-01 Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter
$55.20 D3035-95 Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter
$41.00 D3139-98(2011) Standard Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals
$49.20 D3139-98(2005) Standard Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals
$49.20 D3139-98 Standard Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals
$46.00 D3261-16 Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
$55.20 D3261-12e1 Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
$55.20 D3261-12 Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
$55.20 D3261-10a Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
$55.20 D3261-03 Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
$55.20 D3261-97 Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
$46.00 D3262-16 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe
$55.20 D3262-11 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe
$55.20 D3262-06 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe
$55.20 D3262-03 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe
$55.20 D3262-01 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe
$55.20 D3262-96 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe
$46.00 D3295-15 Standard Specification for PTFE Tubing, Miniature Beading and Spiral Cut Tubing
$55.20 D3295-06(2011) Standard Specification for PTFE Tubing, Miniature Beading and Spiral Cut Tubing
$55.20 D3295-06 Standard Specification for PTFE Tubing, Miniature Beading and Spiral Cut Tubing
$55.20 D3295-01 Standard Specification for PTFE Tubing, Miniature Beading and Spiral Cut Tubing
$55.20 D3295-97 Standard Specification for PTFE Tubing, Miniature Beading and Spiral Cut Tubing
$41.00 D3296-14a Standard Specification for FEP-Fluorocarbon Tube
$49.20 D3296-14 Standard Specification for FEP-Fluorocarbon Tube
$55.20 D3296-03(2008) Standard Specification for FEP-Fluorocarbon Tube
$49.20 D3296-03 Standard Specification for FEP-Fluorocarbon Tube
$49.20 D3296-98 Standard Specification for FEP-Fluorocarbon Tube
$46.00 D3350-14 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
$55.20 D3350-12e1 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
$55.20 D3350-12 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
$55.20 D3350-10a Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
$55.20 D3350-10 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
$55.20 D3350-08 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
$55.20 D3350-06 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
$55.20 D3350-05 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
$55.20 D3350-04 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
$55.20 D3350-02a Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
$55.20 D3350-02 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
$55.20 D3350-01 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
$55.20 D3350-00 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
$52.00 D3517-14 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
$62.40 D3517-11 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
$62.40 D3517-06 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
$62.40 D3517-03 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
$62.40 D3517-01 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
$62.40 D3517-96 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
$49.20 D3567-97(2006) Standard Practice for Determining Dimensions of Fiberglass (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings
$49.20 D3567-97(2002) Standard Practice for Determining Dimensions of Fiberglass (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings
$49.20 D3567-97 Standard Practice for Determining Dimensions of Fiberglass (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings
$46.00 D3681-12e1 Standard Test Method for Chemical Resistance of “Fiberglass” (Glass–Fiber–Reinforced Thermosetting-Resin) Pipe in a Deflected Condition
$55.20 D3681-12 Standard Test Method for Chemical Resistance of “Fiberglass” (Glass–Fiber–Reinforced Thermosetting-Resin) Pipe in a Deflected Condition
$55.20 D3681-06 Standard Test Method for Chemical Resistance of Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe in a Deflected Condition
$55.20 D3681-01e1 Standard Test Method for Chemical Resistance of Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe in a Deflected Condition
$55.20 D3681-01 Standard Test Method for Chemical Resistance of Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe in a Deflected Condition
$55.20 D3681-96 Standard Test Method for Chemical Resistance of Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe in a Deflected Condition
$52.00 D3839-14 Standard Guide for Underground Installation of “Fiberglass” (Glass-Fiber Reinforced Thermosetting-Resin) Pipe
$62.40 D3839-08 Standard Guide for Underground Installation of Fiberglass (Glass-FiberReinforced Thermosetting-Resin) Pipe
$62.40 D3839-02e1 Standard Guide for Underground Installation of Fiberglass (Glass-FiberReinforced Thermosetting-Resin) Pipe
$62.40 D3839-02 Standard Guide for Underground Installation of Fiberglass (Glass-FiberReinforced Thermosetting-Resin) Pipe
$55.20 D3839-94a Standard Practice for Underground Installation of Fiberglass (Glass-Fiber- Reinforced Thermosetting-Resin) Pipe
$49.20 D3915-06 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Pressure Applications (Withdrawn 2015)
$49.20 D3915-99a(2004) Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Pressure Applications
$49.20 D3915-99ae1 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Pressure Applications
$41.00 D3965-16 Standard Classification System and Basis for Specifications for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings
$49.20 D3965-11 Standard Classification System and Basis for Specifications for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings
$49.20 D3965-05 Standard Specification for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings
$49.20 D3965-04 Standard Specification for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings
$49.20 D3965-99 Standard Specification for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings
$41.00 D4396-15 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Nonpressure Applications
$49.20 D4396-06 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Nonpressure Applications (Withdrawn 2015)
$49.20 D4396-99ae1 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Nonpressure Applications
$46.00 D5365-12 Standard Test Method for Long-Term Ring-Bending Strain of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
$55.20 D5365-06 Standard Test Method for Long-Term Ring-Bending Strain of Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
$55.20 D5365-01e1 Standard Test Method for Long-Term Ring-Bending Strain of Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
$55.20 D5365-01 Standard Test Method for Long-Term Ring-Bending Strain of Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
$55.20 D5365-99 Standard Test Method for Long-Term Ring-Bending Strain of Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
$55.20 D5677-16 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines
$55.20 D5677-05(2010) Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines
$55.20 D5677-05 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines
$55.20 D5677-00 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines
$46.00 D6041-11 Standard Specification for Contact-Molded Fiberglass (Glass-Fiber-Reinforced Thermosetting Resin) Corrosion Resistant Pipe and Fittings
$55.20 D6041-97(2002) Standard Specification for Contact-Molded Fiberglass (Glass-Fiber-Reinforced Thermosetting Resin) Corrosion Resistant Pipe and Fittings (Withdrawn 2011)
$55.20 D6041-97 Standard Specification for Contact-Molded Fiberglass (Glass-Fiber-Reinforced Thermosetting Resin) Corrosion Resistant Pipe and Fittings
$52.00 E1118/E1118M-16 Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (RTRP)
$62.40 E1118/E1118M-11 Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (RTRP)
$62.40 E1118-05 Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (RTRP)
$62.40 E1118-00 Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (RTRP)
$62.40 E1118-95 Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (RTRP)
$41.00 F1041-02(2016) Standard Guide for Squeeze-Off of Polyolefin Gas Pressure Pipe and Tubing
$49.20 F1041-02(2008) Standard Guide for Squeeze-Off of Polyolefin Gas Pressure Pipe and Tubing
$49.20 F1041-02 Standard Guide for Squeeze-Off of Polyolefin Gas Pressure Pipe and Tubing
$49.20 F1041-95 Standard Guide for Squeeze-Off of Polyolefin Gas Pressure Pipe and Tubing
$52.00 F1055-16a Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and Tubing
$62.40 F1055-16 Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and Tubing
$55.20 F1055-15 Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and Tubing
$62.40 F1055-13 Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and Tubing
$55.20 F1055-12 Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and Tubing
$55.20 F1055-11 Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and Tubing
$55.20 F1055-98(2006) Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene Pipe and Tubing
$55.20 F1055-98e1 Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene Pipe and Tubing
$55.20 F1055-98 Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene Pipe and Tubing
$55.20 F1057-10 Standard Practice for Estimating the Quality of Extruded Poly (Vinyl Chloride) (PVC) Pipe by the Heat Reversion Technique
$55.20 F1057-87(2005) Standard Practice for Estimating the Quality of Extruded Poly (Vinyl Chloride) (PVC) Pipe by the Heat Reversion Technique
$55.20 F1057-87(2000) Standard Practice for Estimating the Quality of Extruded Poly (Vinyl Chloride) (PVC) Pipe by the Heat Reversion Technique
$52.00 F1173-01(2012) Standard Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications
$62.40 F1173-01(2006) Standard Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications
$62.40 F1173-01 Standard Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications
$80.40 F1173-95 Standard Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications
$46.00 F1216-16 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube
$55.20 F1216-09 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube
$55.20 F1216-08 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube
$55.20 F1216-07b Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube
$55.20 F1216-07a Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube
$55.20 F1216-07 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube
$55.20 F1216-06 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube
$55.20 F1216-05 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube
$55.20 F1216-03 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube
$55.20 F1216-98 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube
$55.20 F1248-96(2002)e1 Standard Test Method for Determination of Environmental Stress Crack Resistance (ESCR) of Polyethylene Pipe (Withdrawn 2007)
$62.40 F1281-11 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe
$62.40 F1281-07 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe
$62.40 F1281-05 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe
$55.20 F1281-03 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe
$55.20 F1281-03e1 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe
$55.20 F1281-02e2 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe
$55.20 F1281-02e1 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe
$55.20 F1281-01a Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe
$55.20 F1281-01 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe
$55.20 F1281-00 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe
$62.40 F1335-04 Standard Specification for Pressure-Rated Composite Pipe and Fittings for Elevated Temperature Service (Withdrawn 2011)
$62.40 F1335-98e1 Standard Specification for Pressure-Rated Composite Pipe and Fittings for Elevated Temperature Service
$62.40 F1335-98 Standard Specification for Pressure-Rated Composite Pipe for Elevated Temperature Service
$41.00 F1365-91(2013) Standard Test Method for Water Infiltration Resistance of Plastic Underground Conduit Joints Which Use Flexible Elastomeric Seals
$49.20 F1365-91(2009) Standard Test Method for Water Infiltration Resistance of Plastic Underground Conduit Joints Which Use Flexible Elastomeric Seals
$49.20 F1365-91(2005) Standard Test Method for Water Infiltration Resistance of Plastic Underground Conduit Joints Which Use Flexible Elastomeric Seals
$49.20 F1365-91(1999)e1 Standard Test Method for Water Infiltration Resistance of Plastic Underground Conduit Joints Which Use Flexible Elastomeric Seals
$46.00 F1412-16 Standard Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems
$55.20 F1412-09 Standard Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems
$55.20 F1412-01e1 Standard Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems
$55.20 F1412-01 Standard Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems
$55.20 F1412-00 Standard Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems
$46.00 F1473-16 Standard Test Method for Notch Tensile Test to Measure the Resistance to Slow Crack Growth of Polyethylene Pipes and Resins
$55.20 F1473-13 Standard Test Method for Notch Tensile Test to Measure the Resistance to Slow Crack Growth of Polyethylene Pipes and Resins
$55.20 F1473-11 Standard Test Method for Notch Tensile Test to Measure the Resistance to Slow Crack Growth of Polyethylene Pipes and Resins
$55.20 F1473-07 Standard Test Method for Notch Tensile Test to Measure the Resistance to Slow Crack Growth of Polyethylene Pipes and Resins
$55.20 F1473-01e1 Standard Test Method for Notch Tensile Test to Measure the Resistance to Slow Crack Growth of Polyethylene Pipes and Resins
$55.20 F1473-01 Standard Test Method for Notch Tensile Test to Measure the Resistance to Slow Crack Growth of Polyethylene Pipes and Resins
$55.20 F1473-97e1 Standard Test Method for Notch Tensile Test to Measure the Resistance to Slow Crack Growth of Polyethylene Pipes and Resins
$49.20 F1474-98 Standard Test Method for Slow Crack Growth Resistance of Notched Polyethylene Plastic Pipe
$55.20 F1483-15 Standard Specification for Oriented Poly(Vinyl Chloride), PVCO, Pressure Pipe
$55.20 F1483-12 Standard Specification for Oriented Poly(Vinyl Chloride), PVCO, Pressure Pipe
$55.20 F1483-05 Standard Specification for Oriented Poly(Vinyl Chloride), PVCO, Pressure Pipe
$55.20 F1483-98 Standard Specification for Oriented Poly(Vinyl Chloride), PVCO, Pressure Pipe
$52.00 F1488-14 Standard Specification for Coextruded Composite Pipe
$62.40 F1488-09e1 Standard Specification for Coextruded Composite Pipe
$62.40 F1488-09 Standard Specification for Coextruded Composite Pipe
$62.40 F1488-03 Standard Specification for Coextruded Composite Pipe
$62.40 F1488-00e1 Standard Specification for Coextruded Composite Pipe
$62.40 F1488-00 Standard Specification for Coextruded Composite Pipe
$52.00 F1498-08(2012)e1 Standard Specification for Taper Pipe Threads 60° for Thermoplastic Pipe and Fittings
$62.40 F1498-08 Standard Specification for Taper Pipe Threads 60° for Thermoplastic Pipe and Fittings
$62.40 F1498-00e1 Standard Specification for Taper Pipe Threads 60° for Thermoplastic Pipe and Fittings
$46.00 F1504-14 Standard Specification for Folded Poly(Vinyl Chloride) (PVC) Pipe for Existing Sewer and Conduit Rehabilitation
$55.20 F1504-10 Standard Specification for Folded Poly(Vinyl Chloride) (PVC) Pipe for Existing Sewer and Conduit Rehabilitation
$55.20 F1504-97e2 Standard Specification for Folded Poly(Vinyl Chloride) (PVC) Pipe for Existing Sewer and Conduit Rehabilitation
$55.20 F1504-02 Standard Specification for Folded Poly(Vinyl Chloride) (PVC) Pipe for Existing Sewer and Conduit Rehabilitation
$55.20 F1504-97e1 Standard Specification for Folded Poly(Vinyl Chloride) (PVC) Pipe for Existing Sewer and Conduit Rehabilitation
$41.00 F1533-01(2009) Standard Specification for Deformed Polyethylene (PE) Liner
$49.20 F1533-01 Standard Specification for Deformed Polyethylene (PE) Liner
$49.20 F1533-97 Standard Specification for Deformed Polyethylene (PE) Liner
$41.00 F1563-01(2011) Standard Specification for Tools to Squeeze-off Polyethylene (PE) Gas Pipe or Tubing
$49.20 F1563-01(2007) Standard Specification for Tools to Squeeze-off Polyethylene (PE) Gas Pipe or Tubing
$49.20 F1563-01 Standard Specification for Tools to Squeeze-off Polyethylene (PE) Gas Pipe or Tubing
$49.20 F1563-94(2000) Standard Specification for Tools to Squeeze-off Polyethylene (PE) Gas Pipe or Tubing
$41.00 F1588-96(2015) Standard Test Method for Constant Tensile Load Joint Test (CTLJT)
$49.20 F1588-96(2011) Standard Test Method for Constant Tensile Load Joint Test (CTLJT)
$49.20 F1588-96(2007) Standard Test Method for Constant Tensile Load Joint Test (CTLJT)
$49.20 F1588-96(2002) Standard Test Method for Constant Tensile Load Joint Test (CTLJT)
$49.20 F1588-96 Standard Test Method for Constant Tensile Load Joint Test (CTLJT)
$49.20 F1589-95 Standard Test Method for Determination of the Critical Pressure for Rapid Crack Propagation in Plastic Pipe
$52.00 F1668-16 Standard Guide for Construction Procedures for Buried Plastic Pipe
$62.40 F1668-08 Standard Guide for Construction Procedures for Buried Plastic Pipe
$62.40 F1668-96 Standard Guide for Construction Procedures for Buried Plastic Pipe
$62.40 F1668-96(2002) Standard Guide for Construction Procedures for Buried Plastic Pipe
$49.20 F1675-13 Standard Practice for Life-Cycle Cost Analysis of Plastic Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits
$55.20 F1675-09 Standard Practice for Life-Cycle Cost Analysis of Plastic Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits
$55.20 F1675-03 Standard Practice for Life-Cycle Cost Analysis of Plastic Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits
$46.00 F1697-09(2015) Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduit
$55.20 F1697-09 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduit
$55.20 F1697-08e1 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduit
$55.20 F1697-08 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduit
$55.20 F1697-07 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduit
$55.20 F1697-01ae1 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduits
$55.20 F1697-02 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduits
$55.20 F1697-01a Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduits
$55.20 F1697-01 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduits
$55.20 F1697-96 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduits
$55.20 F1698-02(2015) Standard Practice for Installation of Poly(Vinyl Chloride)(PVC) Profile Strip Liner and Cementitious Grout for Rehabilitation of Existing Man-Entry Sewers and Conduits
$55.20 F1698-02(2008) Standard Practice for Installation of Poly(Vinyl Chloride)(PVC) Profile Strip Liner and Cementitious Grout for Rehabilitation of Existing Man-Entry Sewers and Conduits
$55.20 F1698-02 Standard Practice for Installation of Poly(Vinyl Chloride)(PVC) Profile Strip Liner and Cementitious Grout for Rehabilitation of Existing Man-Entry Sewers and Conduits
$55.20 F1698-96 Standard Practice for Installation of Poly(Vinyl Chloride)(PVC) Profile Strip Liner and Cementitious Grout for Rehabilitation of Existing Man-Entry Sewers and Conduits
$46.00 F1732-12 Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer and Drain Pipe Containing Recycled PVC Material
$55.20 F1732-96(2005) Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer and Drain Pipe Containing Recycled PVC Material
$49.20 F1732-96 Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer and Drain Pipe Containing Recycled PVC Material
$41.00 F1734-03(2009) Standard Practice for Qualification of a Combination of Squeeze Tool, Pipe, and Squeeze-Off Procedures to Avoid Long-Term Damage in Polyethylene (PE) Gas Pipe
$49.20 F1734-03 Standard Practice for Qualification of a Combination of Squeeze Tool, Pipe, and Squeeze-Off Procedures to Avoid Long-Term Damage in Polyethylene (PE) Gas Pipe
$49.20 F1734-96 Standard Practice for Qualification of a Combination of Squeeze Tool, Pipe, and Squeeze-Off Procedures to Avoid Long-Term Damage in Polyethylene (PE) Gas Pipe
$46.00 F1741-08(2016) Standard Practice for Installation of Machine Spiral Wound Poly (Vinyl Chloride) (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits
$55.20 F1741-08 Standard Practice for Installation of Machine Spiral Wound Poly (Vinyl Chloride) (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits
$55.20 F1741-07 Standard Practice for Installation of Machine Spiral Wound Poly (Vinyl Chloride) (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits
$55.20 F1741-05 Standard Practice for Installation of Machine Spiral Wound Poly (Vinyl Chloride) (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits
$55.20 F1741-02ae1 Standard Practice for Installation of Machine Spiral Wound Poly (Vinyl Chloride) (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits
$55.20 F1741-02a Standard Practice for Installation of Machine Spiral Wound Poly (Vinyl Chloride) (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits
$55.20 F1741-02 Standard Practice for Installation of Machine Spiral Wound Poly (Vinyl Chloride) (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits
$55.20 F1741-01e1 Standard Practice for Installation of Machine Spiral Wound Poly (Vinyl Chloride) (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits
$55.20 F1741-01 Standard Practice for Installation of Machine Spiral Wound Poly (Vinyl Chloride) (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits
$55.20 F1741-96 Standard Practice for Installation of Machine Spiral Wound Poly (Vinyl Chloride) (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits
$46.00 F1743-17 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP)
$55.20 F1743-08(2016) Standard Practice for Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP)
$55.20 F1743-08 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP)
$55.20 F1743-96(2003) Standard Practice for Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP)
$55.20 F1743-96 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP)
$46.00 F1760-16 Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content
$55.20 F1760-01(2011) Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content
$55.20 F1760-01(2005)e1 Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content
$55.20 F1760-01 Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content
$55.20 F1760-97 Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content
$46.00 F1803-15 Standard Specification for Poly (Vinyl Chloride)(PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter 
$55.20 F1803-06 Standard Specification for Poly (Vinyl Chloride)(PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter (Withdrawn 2015)
$55.20 F1803-04 Standard Specification for Poly (Vinyl Chloride)(PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter
$55.20 F1803-97 Standard Specification for Poly (Vinyl Chloride)(PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter
$41.00 F1804-08(2016) Standard Practice for Determining Allowable Tensile Load for Polyethylene (PE) Gas Pipe During Pull-In Installation
$49.20 F1804-08(2012) Standard Practice for Determining Allowable Tensile Load for Polyethylene (PE) Gas Pipe During Pull-In Installation
$49.20 F1804-08 Standard Practice for Determining Allowable Tensile Load for Polyethylene (PE) Gas Pipe During Pull-In Installation
$49.20 F1804-03 Standard Practice for Determining Allowable Tensile Load for Polyethylene (PE) Gas Pipe During Pull-In Installation
$49.20 F1804-97 Standard Practice for Determining Allowable Tensile Load for Polyethylene (PE) Gas Pipe During Pull-In Installation
$46.00 F1867-06(2012) Standard Practice for Installation of Folded/Formed Poly (Vinyl Chloride) (PVC) Pipe Type A for Existing Sewer and Conduit Rehabilitation
$55.20 F1867-06 Standard Practice for Installation of Folded/Formed Poly (Vinyl Chloride) (PVC) Pipe Type A for Existing Sewer and Conduit Rehabilitation
$55.20 F1867-98(2004) Standard Practice for Installation of Folded/Formed Poly (Vinyl Chloride) (PVC) Pipe Type A for Existing Sewer and Conduit Rehabilitation
$46.00 F1871-11 Standard Specification for Folded/Formed Poly (Vinyl Chloride) Pipe Type A for Existing Sewer and Conduit Rehabilitation
$55.20 F1871-02e1 Standard Specification for Folded/Formed Poly (Vinyl Chloride) Pipe Type A for Existing Sewer and Conduit Rehabilitation (Withdrawn 2011)
$55.20 F1871-02 Standard Specification for Folder/Formed Poly (Vinyl Chloride) Pipe Type A for Existing Sewer and Conduit Rehabilitation
$55.20 F1871-98e2 Standard Specification for Folder/Formed Poly (Vinyl Chloride) Pipe Type A for Existing Sewer and Conduit Rehabilitation
$55.20 F1871-98e1 Standard Specification for Folder/Formed Poly (Vinyl Chloride) Pipe Type A for Existing Sewer and Conduit Rehabilitation
$46.00 F1947-10 Standard Practice for Installation of Folded Poly (Vinyl Chloride) (PVC) Pipe into Existing Sewers and Conduits
$55.20 F1947-04 Standard Practice for Installation of Folded Poly (Vinyl Chloride) (PVC) Pipe into Existing Sewers and Conduits
$55.20 F1947-98 Standard Practice for Installation of Folded Poly (Vinyl Chloride) (PVC) Pipe into Existing Sewers and Conduits
$46.00 F2019-11 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Pulled in Place Installation of Glass Reinforced Plastic (GRP) Cured-in-Place Thermosetting Resin Pipe (CIPP)
$55.20 F2019-03(2009) Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Pulled in Place Installation of Glass Reinforced Plastic (GRP) Cured-in-Place Thermosetting Resin Pipe (CIPP)
$55.20 F2019-03 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Pulled in Place Installation of Glass Reinforced Plastic (GRP) Cured-in-Place Thermosetting Resin Pipe (CIPP)
$55.20 F2019-00 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Pulled in Place Installation of Glass Reinforced Plastic (GRP) Cured-in-Place Thermosetting Resin Pipe (CIPP)
$46.00 F2023-15 Standard Test Method for Evaluating the Oxidative Resistance of Crosslinked Polyethylene (PEX) Pipe, Tubing and Systems to Hot Chlorinated Water
$55.20 F2023-13 Standard Test Method for Evaluating the Oxidative Resistance of Crosslinked Polyethylene (PEX) Tubing and Systems to Hot Chlorinated Water
$55.20 F2023-10 Standard Test Method for Evaluating the Oxidative Resistance of Crosslinked Polyethylene (PEX) Tubing and Systems to Hot Chlorinated Water
$55.20 F2023-09 Standard Test Method for Evaluating the Oxidative Resistance of Crosslinked Polyethylene (PEX) Tubing and Systems to Hot Chlorinated Water
$55.20 F2023-08 Standard Test Method for Evaluating the Oxidative Resistance of Crosslinked Polyethylene (PEX) Tubing and Systems to Hot Chlorinated Water
$55.20 F2023-05 Standard Test Method for Evaluating the Oxidative Resistance of Crosslinked Polyethylene (PEX) Tubing and Systems to Hot Chlorinated Water
$55.20 F2023-04 Standard Test Method for Evaluating the Oxidative Resistance of Crosslinked Polyethylene (PEX) Tubing and Systems to Hot Chlorinated Water
$55.20 F2023-03e1 Standard Test Method for Evaluating the Oxidative Resistance of Crosslinked Polyethylene (PEX) Tubing and Systems to Hot Chlorinated Water
$55.20 F2023-03 Standard Test Method for Evaluating the Oxidative Resistance of Crosslinked Polyethylene (PEX) Tubing and Systems to Hot Chlorinated Water
$55.20 F2023-00 Standard Test Method for Evaluating the Oxidative Resistance of Crosslinked Polyethylene (PEX) Tubing and Systems to Hot Chlorinated Water
$46.00 F2164-13 Standard Practice for Field Leak Testing of Polyethylene (PE) and Crosslinked Polyethylene (PEX) Pressure Piping Systems Using Hydrostatic Pressure
$55.20 F2164-10e1 Standard Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Hydrostatic Pressure
$55.20 F2164-10 Standard Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Hydrostatic Pressure
$55.20 F2164-02(2007) Standard Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Hydrostatic Pressure
$55.20 F2164-02 Standard Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Hydrostatic Pressure
$46.00 F2206-14 Standard Specification for Fabricated Fittings of Butt-Fused Polyethylene (PE)
$55.20 F2206-11 Standard Specification for Fabricated Fittings of Butt-Fused Polyethylene (PE) Plastic Pipe, Fittings, Sheet Stock, Plate Stock, or Block Stock
$55.20 F2206-02(2010) Standard Specification for Fabricated Fittings of Butt-Fused Polyethylene (PE) Plastic Pipe, Fittings, Sheet Stock, Plate Stock, or Block Stock
$55.20 F2206-02 Standard Specification for Fabricated Fittings of Butt-Fused Polyethylene (PE) Plastic Pipe, Fittings, Sheet Stock, Plate Stock, or Block Stock
$41.00 F2231-02(2013) Standard Test Method for Charpy Impact Test on Thin Specimens of Polyethylene Used in Pressurized Pipes
$49.20 F2231-02(2008) Standard Test Method for Charpy Impact Test on Thin Specimens of Polyethylene Used in Pressurized Pipes
$49.20 F2231-02e1 Standard Test Method for Charpy Impact Test on Thin Specimens of Polyethylene Used in Pressurized Pipes
$49.20 F2231-02 Standard Test Method for Charpy Impact Test on Thin Specimens of Polyethylene Used in Pressurized Pipes
$52.00 F2262-09 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Tubing OD Controlled SDR9
$55.20 F2262-05 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Tubing OD Controlled SDR9
$55.20 F2262-04 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Tubing OD Controlled SDR9
$55.20 F2262-03 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Tubing OD Controlled SDR9
$46.00 F2263-14 Standard Test Method for Evaluating the Oxidative Resistance of Polyethylene (PE) Pipe to Chlorinated Water
$55.20 F2263-07(2011) Standard Test Method for Evaluating the Oxidative Resistance of Polyethylene (PE) Pipe to Chlorinated Water
$55.20 F2263-07e1 Standard Test Method for Evaluating the Oxidative Resistance of Polyethylene (PE) Pipe to Chlorinated Water
$55.20 F2263-07 Standard Test Method for Evaluating the Oxidative Resistance of Polyethylene (PE) Pipe to Chlorinated Water
$55.20 F2263-05 Standard Test Method for Evaluating the Oxidative Resistance of Polyethylene (PE) Pipe to Chlorinated Water
$55.20 F2263-03 Standard Test Method for Evaluating the Oxidative Resistance of Polyethylene (PE) Pipe to Chlorinated Water
$55.20 F2307-03 Standard Specification for Series 10 Poly(Vinyl Chloride) (PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter (Withdrawn 2011)
$46.00 F2389-17a Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems
$55.20 F2389-17 Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems
$55.20 F2389-15 Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems
$55.20 F2389-10 Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems
$55.20 F2389-07e1 Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems
$55.20 F2389-07 Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems
$55.20 F2389-06 Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems
$55.20 F2389-05 Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems
$55.20 F2389-04 Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems
$55.20 F2390-12 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent (DWV) Pipe and Fittings Having Post-Industrial Recycle Content
$55.20 F2390-07 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent (DWV) Pipe and Fittings Having Post-Industrial Recycle Content
$46.00 F2433-05(2013) Standard Test Method for Determining Thermoplastic Pipe Wall Stiffness
$55.20 F2433-05(2009) Standard Test Method for Determining Thermoplastic Pipe Wall Stiffness
$55.20 F2433-05 Standard Test Method for Determining Thermoplastic Pipe Wall Stiffness
$46.00 F2435-15 Standard Specification for Steel Reinforced Polyethylene (PE) Corrugated Pipe
$55.20 F2435-12 Standard Specification for Steel Reinforced Polyethylene (PE) Corrugated Pipe
$55.20 F2435-07 Standard Specification for Steel Reinforced Polyethylene (PE) Corrugated Pipe
$55.20 F2435-05 Standard Specification for Steel Reinforced Polyethylene (PE) Corrugated Pipe
$49.20 F2487-13 Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Corrugated High Density Polyethylene and Polypropylene Pipelines
$49.20 F2487-06(2012) Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Corrugated High Density Polyethylene Pipelines
$49.20 F2487-06 Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Corrugated High Density Polyethylene Pipelines
$41.00 F2509-15 Standard Specification for Field-assembled Anodeless Riser Kits for Use on Outside Diameter Controlled Polyethylene and Polyamide-11 (PA11) Gas Distribution Pipe and Tubing
$49.20 F2509-12 Standard Specification for Field-assembled Anodeless Riser Kits for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing
$49.20 F2509-06(2012) Standard Specification for Field-assembled Anodeless Riser Kits for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing
$49.20 F2509-06 Standard Specification for Field-assembled Anodeless Riser Kits for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing
$46.00 F2618-15 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings for Chemical Waste Drainage Systems
$55.20 F2618-09(2014) Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings for Chemical Waste Drainage Systems
$55.20 F2618-09 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings for Chemical Waste Drainage Systems
$52.00 F2619/F2619M-13 Standard Specification for High-Density Polyethylene (PE) Line Pipe
$62.40 F2619/F2619M-07 Standard Specification for High-Density Polyethylene (PE) Line Pipe
$67.00 F2620-13 Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings
$80.40 F2620-12 Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings
$80.40 F2620-11e1 Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings
$80.40 F2620-11 Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings
$62.40 F2620-09e1 Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings
$62.40 F2620-09 Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings
$62.40 F2620-06 Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings
$46.00 F2623-14 Standard Specification for Polyethylene of Raised Temperature (PE-RT) SDR 9 Tubing
$55.20 F2623-08 Standard Specification for Polyethylene of Raised Temperature (PE-RT) SDR 9 Tubing
$55.20 F2623-07 Standard Specification for Polyethylene of Raised Temperature (PE-RT) SDR 9 Tubing
$46.00 F2657-07(2012) Standard Test Method for Outdoor Weathering Exposure of Crosslinked Polyethylene (PEX) Tubing
$55.20 F2657-07 Standard Test Method for Outdoor Weathering Exposure of Crosslinked Polyethylene (PEX) Tubing
$46.00 F2658-07(2013) Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) SDR 51 and SDR 64 Sewer Pipe and Fittings
$55.20 F2658-07 Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) SDR 51 and SDR 64 Sewer Pipe and Fittings
$46.00 F2686-14 Standard Specification for Glass Fiber Reinforced Thermoplastic Pipe
$55.20 F2686-10 Standard Specification for Glass Fiber Reinforced Thermoplastic Pipe
$55.20 F2720/F2720M-09 Standard Specification for Glass Fiber Reinforced Polyethylene (PE-GF) Spiral Wound Large Diameter Pipe (Withdrawn 2016)
$55.20 F2720/F2720M-08 Standard Specification for Glass Fiber Reinforced Polyethylene (PE-GF) Spiral Wound Large Diameter Pipe
$46.00 F2736-13e1 Standard Specification for 6 to 30 in. (152 To 762 mm) Polypropylene (PP) Corrugated Single Wall Pipe And Double Wall Pipe
$55.20 F2736-13 Standard Specification for 6 to 30 in. (152 To 762 mm) Polypropylene (PP) Corrugated Single Wall Pipe And Double Wall Pipe
$55.20 F2736-12 Standard Specification for 6 to 30 in. (152 To 762 mm) Polypropylene (PP) Corrugated Single Wall Pipe And Double Wall Pipe
$55.20 F2736-10 Standard Specification for 6 to 30 in. (152 To 762 mm) Polypropylene (PP) Corrugated Single Wall Pipe And Double Wall Pipe
$55.20 F2737-11 Standard Specification for Corrugated High Density Polyethylene (HDPE) Water Quality Units
$55.20 F2737-10a Standard Specification for Corrugated High Density Polyethylene (HDPE) Water Quality Units
$55.20 F2737-10 Standard Specification for Corrugated High Density Polyethylene (HDPE) Water Quality Units
$52.00 F2785-12 Standard Specification for Polyamide 12 Gas Pressure Pipe, Tubing, and Fittings
$62.40 F2785-10a Standard Specification for Polyamide 12 Gas Pressure Pipe, Tubing, and Fittings
$62.40 F2785-10 Standard Specification for Polyamide 12 Gas Pressure Pipe, Tubing, and Fittings
$62.40 F2785-09e1 Standard Specification for Polyamide 12 Gas Pressure Pipe, Tubing, and Fittings
$46.00 F2786-16 Standard Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Gaseous Testing Media Under Pressure (Pneumatic Leak Testing)
$55.20 F2786-10 Standard Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Gaseous Media Under Pressure (Pneumatic Leak Testing)
$46.00 F2806-10(2015) Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Metric SDR-PR)
$55.20 F2806-10e1 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Metric SDR-PR)
$55.20 F2806-10 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Metric SDR-PR)
$46.00 F2817-13 Standard Specification for Poly (Vinyl Chloride) (PVC) Gas Pressure Pipe and Fittings For Maintenance or Repair
$55.20 F2817-10 Standard Specification for Poly (Vinyl Chloride) (PVC) Gas Pressure Pipe and Fittings For Maintenance or Repair
$46.00 F2818-10(2014)e1 Standard Specification for Specification for Crosslinked Polyethylene (PEX) Material Gas Pressure Pipe and Tubing
$55.20 F2818-10(2014) Standard Specification for Specification for Crosslinked Polyethylene (PEX) Material Gas Pressure Pipe and Tubing
$55.20 F2818-10 Standard Specification for Specification for Crosslinked Polyethylene (PEX) Material Gas Pressure Pipe and Tubing
$49.20 F2830-11 Standard Specification for Manufacture and Joining of Polyethylene (PE) Gas Pressure Pipe With a Peelable Polypropylene (PP) Outer Layer
$46.00 F2855-12 Standard Specification for Chlorinated Poly(Vinyl Chloride)/Aluminum/Chlorinated Poly(Vinyl Chloride) (CPVC-AL-CPVC) Composite Pressure Tubing
$55.20 F2855-11 Standard Specification for Chlorinated Poly(Vinyl Chloride)/Aluminum/Chlorinated Poly(Vinyl Chloride) (CPVC-AL-CPVC) Composite Pressure Tubing
$46.00 F2881-11(2015) Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications
$55.20 F2881-11 Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications
$55.20 F2896-11 Standard Specification for Reinforced Polyethylene Composite Pipe For The Transport Of Oil And Gas And Hazardous Liquids
$52.00 F2945-15 Standard Specification for Polyamide 11 Gas Pressure Pipe, Tubing, and Fittings
$62.40 F2945-12a Standard Specification for Polyamide 11 Gas Pressure Pipe, Tubing, and Fittings
$62.40 F2945-12 Standard Specification for Polyamide 11 Gas Pressure Pipe, Tubing, and Fittings
$46.00 F2968/F2968M-14a Standard Specification for Black Crosslinked Polyethylene (PEX) Pipe, Fittings and Joints For Gas Distribution Applications
$55.20 F2968/F2968M-14 Standard Specification for Black Crosslinked Polyethylene (PEX) Pipe, Fittings and Joints For Gas Distribution Applications
$55.20 F2986-12 Standard Specification for Corrugated Polyethylene Pipe and Fittings for Mine Leachate Applications
$41.00 F402-05(2012) Standard Practice for Safe Handling of Solvent Cements, Primers, and Cleaners Used for Joining Thermoplastic Pipe and Fittings
$49.20 F402-05 Standard Practice for Safe Handling of Solvent Cements, Primers, and Cleaners Used for Joining Thermoplastic Pipe and Fittings
$49.20 F402-93(1999) Standard Practice for Safe Handling of Solvent Cements, Primers, and Cleaners Used for Joining Thermoplastic Pipe and Fittings
$55.20 F405-13 Standard Specification for Corrugated Polyethylene (PE) Pipe and Fittings (Withdrawn 2015)
$55.20 F405-05 Standard Specification for Corrugated Polyethylene (PE) Pipe and Fittings
$55.20 F405-97 Standard Specification for Corrugated Polyethylene (PE) Tubing and Fittings
$62.40 F409-12 Standard Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings
$62.40 F409-02(2008) Standard Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings
$62.40 F409-02 Standard Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings
$62.40 F409-99a Standard Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings
$62.40 F412-17 Standard Terminology Relating to Plastic Piping Systems
$62.40 F412-16a Standard Terminology Relating to Plastic Piping Systems
$62.40 F412-16 Standard Terminology Relating to Plastic Piping Systems
$62.40 F412-15 Standard Terminology Relating to Plastic Piping Systems
$62.40 F412-13 Standard Terminology Relating to Plastic Piping Systems
$62.40 F412-12 Standard Terminology Relating to Plastic Piping Systems
$62.40 F412-09 Standard Terminology Relating to Plastic Piping Systems
$62.40 F412-07 Standard Terminology Relating to Plastic Piping Systems
$62.40 F412-06 Standard Terminology Relating to Plastic Piping Systems
$62.40 F412-01ae1 Standard Terminology Relating to Plastic Piping Systems
$62.40 F412-01a Standard Terminology Relating to Plastic Piping Systems
$62.40 F412-01 Standard Terminology Relating to Plastic Piping Systems
$62.40 F412-00 Standard Terminology Relating to Plastic Piping Systems
$46.00 F441/F441M-15 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80
$55.20 F441/F441M-13e1 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80
$55.20 F441/F441M-13 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80
$55.20 F441/F441M-12 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80
$55.20 F441/F441M-09 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80
$55.20 F441/F441M-02 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80
$55.20 F441/F441M-99 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80
$55.20 F441/F441M-02(2008) Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80
$46.00 F442/F442M-13e1 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR–PR)
$55.20 F442/F442M-13 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR–PR)
$55.20 F442/F442M-12 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR–PR)
$55.20 F442/F442M-09 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDRPR)
$55.20 F442/F442M-99(2005)e1 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDRPR)
$55.20 F442/F442M-99(2005) Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR-PR)
$55.20 F442/F442M-99 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR-PR)
$46.00 F449-16 Standard Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control
$55.20 F449-02(2014) Standard Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control
$55.20 F449-02e1 Standard Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control
$55.20 F449-02 Standard Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control
$55.20 F449-97 Standard Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control
$67.00 F480-14 Standard Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80
$80.40 F480-12 Standard Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80
$80.40 F480-06be1 Standard Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80
$80.40 F480-06b Standard Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80
$80.40 F480-06a Standard Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80
$80.40 F480-02 Standard Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80
$41.00 F481-97(2014) Standard Practice for Installation of Thermoplastic Pipe and Corrugated Pipe in Septic Tank Leach Fields
$49.20 F481-97(2008) Standard Practice for Installation of Thermoplastic Pipe and Corrugated Pipe in Septic Tank Leach Fields
$49.20 F481-97 Standard Practice for Installation of Thermoplastic Pipe and Corrugated Pipe in Septic Tank Leach Fields
$49.20 F481-97(2002) Standard Practice for Installation of Thermoplastic Pipe and Corrugated Pipe in Septic Tank Leach Fields
$55.20 F512-12 Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings for Underground Installation
$55.20 F512-06 Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings for Underground Installation
$55.20 F512-95(2001)e1 Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings for Underground Installation
$55.20 F512-95(2001) Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings for Underground Installation
$55.20 F512-95 Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings for Underground Installation
$46.00 F585-16 Standard Guide for Insertion of Flexible Polyethylene Pipe Into Existing Sewers
$55.20 F585-13 Standard Guide for Insertion of Flexible Polyethylene Pipe Into Existing Sewers
$55.20 F585-94(2007) Standard Practice for Insertion of Flexible Polyethylene Pipe Into Existing Sewers
$55.20 F585-94(2000) Standard Practice for Insertion of Flexible Polyethylene Pipe Into Existing Sewers
$46.00 F610/F610M-15 Standard Practice for Evaluating the Quality of Molded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings by the Heat Reversion Technique
$49.20 F610/F610M-10 Standard Test Method for Evaluating the Quality of Molded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings by the Heat Reversion Technique
$49.20 F610/F610M-00a(2009) Standard Test Method for Evaluating the Quality of Molded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings by the Heat Reversion Technique
$49.20 F610/F610M-00a(2005) Standard Test Method for Evaluating the Quality of Molded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings by the Heat Reversion Technique
$49.20 F610/F610M-00a Standard Test Method for Evaluating the Quality of Molded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings by the Heat Reversion Technique
$46.00 F628-12e2 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core
$55.20 F628-12e1 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core
$55.20 F628-12 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core
$55.20 F628-08 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core
$55.20 F628-06e1 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core
$55.20 F628-06 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core
$55.20 F628-01 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core
$55.20 F628-00 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core
$55.20 F628-91 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe with a Cellular Core
$62.40 F645-15 Standard Guide for Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems
$52.00 F645-15a Standard Guide for Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems
$62.40 F645-13 Standard Guide for Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems
$62.40 F645-12 Standard Guide for Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems
$55.20 F645-11 Standard Guide for Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems
$55.20 F645-04 Standard Guide for Selection, Design, and Installation of Thermoplastic Water-Pressure Piping Systems
$55.20 F645-02 Standard Guide for Selection, Design, and Installation of Thermoplastic Water-Pressure Piping Systems
$55.20 F645-95 Standard Guide for Selection, Design, and Installation of Thermoplastic Water Pressure Piping Systems
$41.00 F656-15 Standard Specification for Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings
$49.20 F656-10 Standard Specification for Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings
$49.20 F656-08 Standard Specification for Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings
$49.20 F656-02 Standard Specification for Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings
$49.20 F656-96a Standard Specification for Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings
$46.00 F667/F667M-16 Standard Specification for 3 through 24 in. Corrugated Polyethylene Pipe and Fittings
$55.20 F667/F667M-15 Standard Specification for 3 through 24 in. Corrugated Polyethylene Pipe and Fittings
$55.20 F667-12 Standard Specification for 3 through 24 in. Corrugated Polyethylene Pipe and Fittings
$55.20 F667-06 Standard Specification for Large Diameter Corrugated Polyethylene Pipe and Fittings
$49.20 F667-97 Standard Specification for Large Diameter Corrugated Polyethylene Pipe and Fittings
$46.00 F679-16 Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings
$55.20 F679-15 Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings
$55.20 F679-13a Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings
$55.20 F679-13 Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings
$55.20 F679-08 Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings
$55.20 F679-06a Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings
$55.20 F679-06 Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings
$55.20 F679-03 Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings
$55.20 F679-01 Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings
$55.20 F679-00a Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings
$49.20 F689-97(2011) Standard Practice for Determination of the Temperature of Above-Ground Plastic Gas Pressure Pipe Within Metallic Casings (Withdrawn 2017)
$49.20 F689-97(2004) Standard Practice for Determination of the Temperature of Above-Ground Plastic Gas Pressure Pipe Within Metallic Casings
$55.20 F690-86(2003)e2 Standard Practice for Underground Installation of Thermoplastic Pressure Piping Irrigation Systems (Withdrawn 2012)
$55.20 F690-86(2003)e1 Standard Practice for Underground Installation of Thermoplastic Pressure Piping Irrigation Systems
$55.20 F690-86(2003) Standard Practice for Underground Installation of Thermoplastic Pressure Piping Irrigation Systems
$55.20 F690-86(1994) Standard Practice for Underground Installation of Thermoplastic Pressure Piping Irrigation Systems
$49.20 F699-00e1 Standard Practice for Accelerated Conditioning of Polybutylene Pipe and Tubing for Subsequent Quality Control Testing (Withdrawn 2005)
$49.20 F699-00 Standard Practice for Accelerated Conditioning of Polybutylene Pipe and Tubing for Subsequent Quality Control Testing
$52.00 F714-13 Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter
$62.40 F714-12a Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter
$62.40 F714-12e1 Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter
$62.40 F714-12 Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter
$55.20 F714-10 Standard Specification for Polyethylene (PE) Plastic Pipe (SDR-PR) Based on Outside Diameter
$55.20 F714-08 Standard Specification for Polyethylene (PE) Plastic Pipe (SDR-PR) Based on Outside Diameter
$55.20 F714-06a Standard Specification for Polyethylene (PE) Plastic Pipe (SDR-PR) Based on Outside Diameter
$55.20 F714-06 Standard Specification for Polyethylene (PE) Plastic Pipe (SDR-PR) Based on Outside Diameter
$55.20 F714-05 Standard Specification for Polyethylene (PE) Plastic Pipe (SDR-PR) Based on Outside Diameter
$55.20 F714-03 Standard Specification for Polyethylene (PE) Plastic Pipe (SDR-PR) Based on Outside Diameter
$55.20 F714-01 Standard Specification for Polyethylene (PE) Plastic Pipe (SDR-PR) Based on Outside Diameter
$55.20 F714-00 Standard Specification for Polyethylene (PE) Plastic Pipe (SDR-PR) Based on Outside Diameter
$41.00 F725-03(2013) Standard Practice for Drafting Impact Test Requirements In Thermoplastic Pipe And Fittings Standards
$49.20 F725-03(2008)e1 Standard Practice for Drafting Impact Test Requirements In Thermoplastic Pipe And Fittings Standards
$49.20 F725-03e1 Standard Practice for Drafting Impact Test Requirements In Thermoplastic Pipe And Fittings Standards
$49.20 F725-03 Standard Practice for Drafting Impact Test Requirements In Thermoplastic Pipe And Fittings Standards
$49.20 F725-89(1996) Standard Practice for Drafting Impact Test Requirements In Thermoplastic Pipe And Fittings Standards
$46.00 F758-14 Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Plastic Underdrain Systems for Highway, Airport, and Similar Drainage
$55.20 F758-95(2007)e1 Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Plastic Underdrain Systems for Highway, Airport, and Similar Drainage
$55.20 F758-95(2000) Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Plastic Underdrain Systems for Highway, Airport, and Similar Drainage
$46.00 F794-03(2014) Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter
$55.20 F794-03(2009) Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter
$55.20 F794-03 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter
$55.20 F794-01 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter
$55.20 F794-99 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter
$41.00 F810-12 Standard Specification for Smoothwall Polyethylene (PE) Pipe for Use in Drainage and Waste Disposal Absorption Fields
$49.20 F810-07 Standard Specification for Smoothwall Polyethylene (PE) Pipe for Use in Drainage and Waste Disposal Absorption Fields
$49.20 F810-01 Standard Specification for Smoothwall Polyethylene (PE) Pipe for Use in Drainage and Waste Disposal Absorption Fields
$49.20 F810-99 Standard Specification for Smoothwall Polyethylene (PE) Pipe for Use in Drainage and Waste Disposal Absorption Fields
$62.40 F876-15a Standard Specification for Crosslinked Polyethylene (PEX) Tubing
$62.40 F876-15 Standard Specification for Crosslinked Polyethylene (PEX) Tubing
$62.40 F876-13a Standard Specification for Crosslinked Polyethylene (PEX) Tubing
$62.40 F876-13 Standard Specification for Crosslinked Polyethylene (PEX) Tubing
$62.40 F876-10e1 Standard Specification for Crosslinked Polyethylene (PEX) Tubing
$62.40 F876-10 Standard Specification for Crosslinked Polyethylene (PEX) Tubing
$62.40 F876-09 Standard Specification for Crosslinked Polyethylene (PEX) Tubing
$55.20 F876-08a Standard Specification for Crosslinked Polyethylene (PEX) Tubing
$55.20 F876-08 Standard Specification for Crosslinked Polyethylene (PEX) Tubing
$55.20 F876-07 Standard Specification for Crosslinked Polyethylene (PEX) Tubing
$55.20 F876-06 Standard Specification for Crosslinked Polyethylene (PEX) Tubing
$55.20 F876-05 Standard Specification for Crosslinked Polyethylene (PEX) Tubing
$55.20 F876-04 Standard Specification for Crosslinked Polyethylene (PEX) Tubing
$55.20 F876-03a Standard Specification for Crosslinked Polyethylene (PEX) Tubing
$55.20 F876-03 Standard Specification for Crosslinked Polyethylene (PEX) Tubing
$55.20 F876-02 Standard Specification for Crosslinked Polyethylene (PEX) Tubing
$55.20 F876-01e2 Standard Specification for Crosslinked Polyethylene (PEX) Tubing
$55.20 F876-01e1 Standard Specification for Crosslinked Polyethylene (PEX) Tubing
$55.20 F876-01 Standard Specification for Crosslinked Polyethylene (PEX) Tubing
$55.20 F876-00 Standard Specification for Crosslinked Polyethylene (PEX) Tubing
$46.00 F877-11a Standard Specification for Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution Systems
$55.20 F877-11 Standard Specification for Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution Systems
$55.20 F877-07 Standard Specification for Crosslinked Polyethylene (PEX) Plastic Hot- and Cold-Water Distribution Systems
$55.20 F877-05 Standard Specification for Crosslinked Polyethylene (PEX) Plastic Hot- and Cold-Water Distribution Systems
$55.20 F877-02a Standard Specification for Crosslinked Polyethylene (PEX) Plastic Hot- and Cold-Water Distribution Systems
$55.20 F877-02e1 Standard Specification for Crosslinked Polyethylene (PEX) Plastic Hot- and Cold-Water Distribution Systems
$55.20 F877-02 Standard Specification for Crosslinked Polyethylene (PEX) Plastic Hot- and Cold-Water Distribution Systems
$55.20 F877-01e1 Standard Specification for Crosslinked Polyethylene (PEX) Plastic Hot- and Cold-Water Distribution Systems
$55.20 F877-01 Standard Specification for Crosslinked Polyethylene (PEX) Plastic Hot- and Cold-Water Distribution Systems
$55.20 F877-00 Standard Specification for Crosslinked Polyethylene (PEX) Plastic Hot- and Cold-Water Distribution Systems
$46.00 F891-16 Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core
$55.20 F891-10 Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core
$55.20 F891-09 Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core
$55.20 F891-07 Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core
$55.20 F891-04 Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core
$55.20 F891-00e1 Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core
$55.20 F891-00 Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core
$46.00 F894-13 Standard Specification for Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe
$55.20 F894-06 Standard Specification for Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe
$55.20 F894-05 Standard Specification for Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe
$55.20 F894-98a Standard Specification for Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe
$46.00 F948-94(2011) Standard Test Method for Time-to-Failure of Plastic Piping Systems and Components Under Constant Internal Pressure With Flow
$55.20 F948-94(2006) Standard Test Method for Time-to-Failure of Plastic Piping Systems and Components Under Constant Internal Pressure With Flow
$55.20 F948-94(2001)e1 Standard Test Method for Time-to-Failure of Plastic Piping Systems and Components Under Constant Internal Pressure With Flow
$55.20 F948-94 Standard Test Method for Time-to-Failure of Plastic Piping Systems and Components Under Constant Internal Pressure With Flow
$55.20 F948-94(2001) Standard Test Method for Time-to-Failure of Plastic Piping Systems and Components Under Constant Internal Pressure With Flow
$52.00 F949-15 Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings
$55.20 F949-10 Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings
$55.20 F949-09 Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings
$55.20 F949-06a Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings
$55.20 F949-06 Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings
$55.20 F949-03 Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings
$55.20 F949-01a Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings
$55.20 F949-01 Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings
$55.20 F949-00 Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings
$62.40 D2846/D2846M-17 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems
$62.40 D2846/D2846-09a Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems
$46.00 D2996-17 Standard Specification for Filament-Wound “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
$46.00 D5677-17 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines
$46.00 F1057-17 Standard Practice for Estimating the Quality of Extruded Poly (Vinyl Chloride) (PVC) Pipe by the Heat Reversion Technique
$52.00 F1281-17 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe
$41.00 F1675-13(2017) Standard Practice for Life-Cycle Cost Analysis of Plastic Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits
$46.00 F1698-02(2015)e1 Standard Practice for Installation of Poly(Vinyl Chloride)(PVC) Profile Strip Liner and Cementitious Grout for Rehabilitation of Existing Man-Entry Sewers and Conduits
$52.00 F409-17 Standard Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings
$52.00 F412-17a Standard Terminology Relating to Plastic Piping Systems
$46.00 F512-12(2017) Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings for Underground Installation
$41.00 D2924-12(2017) Standard Test Method for External Pressure Resistance of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
$46.00 F2390-12(2017) Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent (DWV) Pipe and Fittings Having Post-Industrial Recycle Content
$46.00 F2737-11(2017) Standard Specification for Corrugated High Density Polyethylene (HDPE) Water Quality Units
$41.00 F2830-11(2017) Standard Specification for Manufacture and Joining of Polyethylene (PE) Gas Pressure Pipe With a Peelable Polypropylene (PP) Outer Layer
$46.00 F2896-11(2017) Standard Specification for Reinforced Polyethylene Composite Pipe For The Transport Of Oil And Gas And Hazardous Liquids
$46.00 F2986-12(2017) Standard Specification for Corrugated Polyethylene Pipe and Fittings for Mine Leachate Applications
$52.00 D2846/D2846M-17a Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems
$46.00 F1483-17 Standard Specification for Oriented Poly(Vinyl Chloride), PVCO, Pressure Pipe
$52.00 F876-17 Standard Specification for Crosslinked Polyethylene (PEX) Tubing
$62.40 ASTM-F876-2008B EDITION Standard Specification for Crosslinked Polyethylene (PEX) Tubing
$41.00 D3567-17 Standard Practice for Determining Dimensions of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings
$46.00 D2729-17 Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
$41.00 F2487-13(2017) Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Corrugated High Density Polyethylene and Polypropylene Pipelines
$41.00 D1599-14e1 Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings
$49.20 D1599-14 Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings
$49.20 D1599-99(2011) Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings
$49.20 D1599-99(2005) Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings
$49.20 D1599-99e1 Standard Test Method for Resistance to Short-Time Hydraulic Failure Pressure of Plastic Pipe, Tubing, and Fittings
$49.20 D1599-99 Standard Test Method for Resistance to Short-Time Hydraulic Failure Pressure of Plastic Pipe, Tubing, and Fittings
$46.00 D2122-16 Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
$55.20 D2122-15 Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
$55.20 D2122-98(2010) Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
$55.20 D2122-98(2004) Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
$55.20 D2122-98e1 Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
$55.20 D2122-98 Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
$41.00 D2152-13 Standard Test Method for Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion
$49.20 D2152-95(2010) Standard Test Method for Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion
$49.20 D2152-95(2003) Standard Test Method for Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion
$49.20 D2152-95 Standard Test Method for Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion
$46.00 D2444-99(2010) Standard Test Method for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)
$55.20 D2444-99(2005) Standard Test Method for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)
$55.20 D2444-99 Standard Test Method for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)
$55.20 D2466-15 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40
$55.20 D2466-13 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40
$55.20 D2466-06 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40
$55.20 D2466-05 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40
$55.20 D2466-02 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40
$55.20 D2466-01 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40
$55.20 D2466-99 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40
$46.00 D2467-15 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
$55.20 D2467-13a Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
$55.20 D2467-13 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
$55.20 D2467-06 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
$55.20 D2467-05 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
$55.20 D2467-04e1 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
$55.20 D2467-04 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
$55.20 D2467-02 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
$55.20 D2467-01 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
$55.20 D2467-99 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
$55.20 D2468-96a Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe Fittings, Schedule 40 (Withdrawn 2003)
$52.00 D2513-16a Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
$62.40 D2513-16 Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
$62.40 D2513-14e1 Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
$62.40 D2513-14 Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
$62.40 D2513-12ae1 Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
$62.40 D2513-12a Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
$62.40 D2513-12 Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
$62.40 D2513-11c Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
$62.40 D2513-11b Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
$62.40 D2513-11a Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
$62.40 D2513-11e1 Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
$62.40 D2513-11 Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
$62.40 D2513-09a Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
$80.40 D2513-09 Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
$80.40 D2513-08b Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
$80.40 D2513-08a Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
$80.40 D2513-08 Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
$80.40 D2513-07b Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
$80.40 D2513-07a Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
$80.40 D2513-07 Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
$80.40 D2513-06b Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
$80.40 D2513-06a Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
$80.40 D2513-06 Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
$80.40 D2513-05 Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
$80.40 D2513-04a Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
$80.40 D2513-04 Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
$80.40 D2513-03b Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
$80.40 D2513-03a Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
$80.40 D2513-03 Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
$80.40 D2513-01ae1 Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
$80.40 D2513-01 Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
$62.40 D2513-00 Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
$62.40 D2513-99 Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
$55.20 D2517-06 Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings
$55.20 D2517-05 Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings
$55.20 D2517-00e1 Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings
$55.20 D2517-00 Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings
$46.00 D2564-12 Standard Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems
$55.20 D2564-04(2009)e1 Standard Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems
$55.20 D2564-04e1 Standard Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems
$55.20 D2564-04 Standard Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems
$49.20 D2564-96a Standard Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems
$49.20 D2564-91a Standard Specification for Solvent Cements for Poly (Vinyl Chloride) (PVC) Plastic Piping Systems
$49.20 D2564-91 Standard Specification for Solvent Cements for Poly (Vinyl Chloride) (PVC) Plastic Piping Systems
$41.00 D2609-15 Standard Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe
$49.20 D2609-14 Standard Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe
$49.20 D2609-02(2008) Standard Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe
$49.20 D2609-02 Standard Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe
$49.20 D2609-00 Standard Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe
$46.00 D2683-14 Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing
$55.20 D2683-10e3 Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing
$55.20 D2683-10e2 Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing
$55.20 D2683-10e1 Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing
$55.20 D2683-10 Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing
$55.20 D2683-04 Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing
$55.20 D2683-98 Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing
$55.20 D2729-11 Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
$55.20 D2729-03 Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
$55.20 D2729-96a Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
$46.00 D2852-16 Standard Specification for Styrene-Rubber (SR) Plastic Drain Pipe and Fittings
$55.20 D2852-95(2008) Standard Specification for Styrene-Rubber (SR) Plastic Drain Pipe and Fittings
$55.20 D2852-95 Standard Specification for Styrene-Rubber (SR) Plastic Drain Pipe and Fittings
$55.20 D2852-95(2002) Standard Specification for Styrene-Rubber (SR) Plastic Drain Pipe and Fittings
$52.00 D2992-12 Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings
$62.40 D2992-06 Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings
$62.40 D2992-01 Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings
$62.40 D2992-96e1 Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings
$52.00 D3034-16 Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
$62.40 D3034-15e1 Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
$62.40 D3034-15 Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
$62.40 D3034-14a Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
$62.40 D3034-14 Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
$55.20 D3034-08 Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
$55.20 D3034-06 Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
$62.40 D3034-04a Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
$62.40 D3034-04 Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
$55.20 D3034-00 Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
$46.00 D3261-16 Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
$55.20 D3261-12e1 Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
$55.20 D3261-12 Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
$55.20 D3261-10a Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
$55.20 D3261-03 Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
$55.20 D3261-97 Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
$80.40 D3311-11(2016) Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns
$80.40 D3311-11 Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns
$80.40 D3311-09a Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns
$80.40 D3311-09 Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns
$80.40 D3311-08 Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns
$80.40 D3311-06a Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns
$80.40 D3311-06 Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns
$80.40 D3311-02e1 Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns
$62.40 D3311-94 Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns
$62.40 D3311-92 Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns
$46.00 D3350-14 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
$55.20 D3350-12e1 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
$55.20 D3350-12 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
$55.20 D3350-10a Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
$55.20 D3350-10 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
$55.20 D3350-08 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
$55.20 D3350-06 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
$55.20 D3350-05 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
$55.20 D3350-04 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
$55.20 D3350-02a Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
$55.20 D3350-02 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
$55.20 D3350-01 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
$55.20 D3350-00 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
$49.20 D3567-97(2006) Standard Practice for Determining Dimensions of Fiberglass (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings
$49.20 D3567-97(2002) Standard Practice for Determining Dimensions of Fiberglass (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings
$49.20 D3567-97 Standard Practice for Determining Dimensions of Fiberglass (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings
$46.00 D3840-14 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Fittings for Nonpressure Applications
$55.20 D3840-10 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Fittings for Nonpressure Applications
$55.20 D3840-01(2005) Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Fittings for Nonpressure Applications
$55.20 D3840-01 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Fittings for Nonpressure Applications
$55.20 D3840-99 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Fittings for Nonpressure Applications
$49.20 D3915-06 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Pressure Applications (Withdrawn 2015)
$49.20 D3915-99a(2004) Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Pressure Applications
$49.20 D3915-99ae1 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Pressure Applications
$41.00 D3965-16 Standard Classification System and Basis for Specifications for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings
$49.20 D3965-11 Standard Classification System and Basis for Specifications for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings
$49.20 D3965-05 Standard Specification for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings
$49.20 D3965-04 Standard Specification for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings
$49.20 D3965-99 Standard Specification for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings
$55.20 D5677-16 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines
$55.20 D5677-05(2010) Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines
$55.20 D5677-05 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines
$55.20 D5677-00 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines
$46.00 D5685-11 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings
$55.20 D5685-05 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings
$55.20 D5685-02 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings
$55.20 D5685-01 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings
$55.20 D5685-95 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings
$46.00 D6041-11 Standard Specification for Contact-Molded Fiberglass (Glass-Fiber-Reinforced Thermosetting Resin) Corrosion Resistant Pipe and Fittings
$55.20 D6041-97(2002) Standard Specification for Contact-Molded Fiberglass (Glass-Fiber-Reinforced Thermosetting Resin) Corrosion Resistant Pipe and Fittings (Withdrawn 2011)
$55.20 D6041-97 Standard Specification for Contact-Molded Fiberglass (Glass-Fiber-Reinforced Thermosetting Resin) Corrosion Resistant Pipe and Fittings
$41.00 F1201-88(2016) Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0°F
$49.20 F1201-88(2010) Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0°F
$49.20 F1201-88(2004) Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0°F
$62.40 F1335-04 Standard Specification for Pressure-Rated Composite Pipe and Fittings for Elevated Temperature Service (Withdrawn 2011)
$62.40 F1335-98e1 Standard Specification for Pressure-Rated Composite Pipe and Fittings for Elevated Temperature Service
$62.40 F1335-98 Standard Specification for Pressure-Rated Composite Pipe for Elevated Temperature Service
$46.00 F1336-15 Standard Specification for Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings
$55.20 F1336-07 Standard Specification for Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings
$55.20 F1336-02 Standard Specification for Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings
$55.20 F1336-00 Standard Specification for Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings
$46.00 F1733-13 Standard Specification for Butt Heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA) Plastic Pipe and Tubing
$55.20 F1733-07 Standard Specification for Butt Heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA) Plastic Pipe and Tubing
$55.20 F1733-96(2002) Standard Specification for Butt Heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA) Plastic Pipe and Tubing
$55.20 F1733-96e1 Standard Specification for Butt Heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA) Plastic Pipe and Tubing
$55.20 F1733-96 Standard Specification for Butt heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA) Plastic Pipe and Tubing
$46.00 F1735-09(2015) Standard Specification for Poly (Vinyl Chloride) (PVC) Profile Strip for PVC Liners for Rehabilitation of Existing Man-Entry Sewers and Conduits
$55.20 F1735-09 Standard Specification for Poly (Vinyl Chloride)(PVC) Profile Strip for PVC Liners for Rehabilitation of Existing Man-Entry Sewers and Conduits
$55.20 F1735-02(2008) Standard Specification for Poly (Vinyl Chloride)(PVC) Profile Strip for PVC Liners for Rehabilitation of Existing Man-Entry Sewers and Conduits
$55.20 F1735-02e1 Standard Specification for Poly (Vinyl Chloride) (PVC) Profile Strip for PVC Liners for Rehabilitation of Existing Man-Entry Sewers and Conduits
$55.20 F1735-02 Standard Specification for Poly (Vinyl Chloride) (PVC) Profile Strip for PVC Liners for Rehabilitation of Existing Man-Entry Sewers and Conduits
$55.20 F1735-96 Standard Specification for Poly (Vinyl Chloride) (PVC) Profile Strip for PVC Liners for Rehabilitation of Existing Man-Entry Sewers and Conduits
$46.00 F1865-09 Standard Specification for Mechanical Cold Expansion Insert Fitting With Compression Sleeve for Cross-linked Polyethylene (PEX) Tubing
$55.20 F1865-02a(2009) Standard Specification for Mechanical Cold Expansion Insert Fitting With Compression Sleeve for Cross-linked Polyethylene (PEX) Tubing
$49.20 F1865-02a Standard Specification for Mechanical Cold Expansion Insert Fitting With Compression Sleeve for Cross-linked Polyethylene (PEX) Tubing
$49.20 F1865-02e1 Standard Specification for Mechanical Cold Expansion Insert Fitting With Compression Sleeve for Cross-linked Polyethylene (PEX) Tubing
$55.20 F1865-02 Standard Specification for Mechanical Cold Expansion Insert Fitting With Compression Sleeve for Cross-linked Polyethylene (PEX) Tubing
$46.00 F1924-12 Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing
$49.20 F1924-05(2011) Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing
$49.20 F1924-05 Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing
$49.20 F1924-01e1 Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing
$49.20 F1924-01 Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing
$49.20 F1924-98 Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing
$46.00 F1960-15 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing
$55.20 F1960-14a Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing
$55.20 F1960-14 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing
$55.20 F1960-12 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing
$55.20 F1960-11e1 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing
$55.20 F1960-11 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing
$55.20 F1960-10 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing
$55.20 F1960-09a Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing
$55.20 F1960-09 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing
$55.20 F1960-08 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing
$55.20 F1960-07a Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene
$55.20 F1960-07 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing
$55.20 F1960-05 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing
$55.20 F1960-03 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing
$55.20 F1960-02b Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing
$55.20 F1960-02a Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing
$55.20 F1960-02 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing
$55.20 F1960-00e1 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing
$52.00 F1986-01(2011) Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems
$62.40 F1986-01(2006) Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems
$62.40 F1986-01 Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems
$52.00 F1987-01(2011) Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hydronic Heating Systems
$62.40 F1987-01(2006) Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hydronic Heating Systems
$62.40 F1987-01 Standard Specification for Multilayer Pipe Type 2 , Compression Fittings, and Compression Joints for Hydronic Heating Systems
$55.20 F1987-00a Standard Specification for Multilayer Pipe Type 2 , Compression Fittings, and Compression Joints for Hydronic Heating Systems
$55.20 F2135-01(2017) Standard Specification for Molded Drain, Waste, and Vent (DWV) Short-Pattern Plastic Fittings
$55.20 F2135-01(2012) Standard Specification for Molded Drain, Waste, and Vent (DWV) Short-Pattern Plastic Fittings
$55.20 F2135-01(2007) Standard Specification for Molded Drain, Waste, and Vent (DWV) Short-Pattern Plastic Fittings
$55.20 F2135-01 Standard Specification for Molded Drain, Waste, and Vent (DWV) Short-Pattern Plastic Fittings
$46.00 F2145-13 Standard Specification for Polyamide 11 (PA 11) and Polyamide 12 (PA12) Mechanical Fittings for Use on Outside Diameter Controlled Polyamide 11 and Polyamide 12 Pipe and Tubing
$49.20 F2145-09 Standard Specification for Polyamide 11 (PA 11) and Polyamide 12 (PA12) Mechanical Fittings for Use on Outside Diameter Controlled Polyamide 11 and Polyamide 12 Pipe and Tubing
$49.20 F2145-01(2007) Standard Specification for Polyamide 11 (PA 11) Mechanical Fittings for Use on Outside Diameter Controlled Polyamide 11 Pipe and Tubing
$49.20 F2145-01 Standard Specification for Polyamide 11 (PA 11) Mechanical Fittings for Use on Outside Diameter Controlled Polyamide 11 Pipe and Tubing
$46.00 F2159-14 Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
$55.20 F2159-11 Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
$55.20 F2159-10 Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
$55.20 F2159-09 Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing
$55.20 F2159-05 Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing
$55.20 F2159-03e1 Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing
$55.20 F2159-03 Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing
$55.20 F2159-02 Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing
$55.20 F2159-01 Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing
$46.00 F2206-14 Standard Specification for Fabricated Fittings of Butt-Fused Polyethylene (PE)
$55.20 F2206-11 Standard Specification for Fabricated Fittings of Butt-Fused Polyethylene (PE) Plastic Pipe, Fittings, Sheet Stock, Plate Stock, or Block Stock
$55.20 F2206-02(2010) Standard Specification for Fabricated Fittings of Butt-Fused Polyethylene (PE) Plastic Pipe, Fittings, Sheet Stock, Plate Stock, or Block Stock
$55.20 F2206-02 Standard Specification for Fabricated Fittings of Butt-Fused Polyethylene (PE) Plastic Pipe, Fittings, Sheet Stock, Plate Stock, or Block Stock
$41.00 F2261-06(2011) Standard Test Method for Pressure Rating Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40 and 80 Socket-Type
$49.20 F2261-06 Standard Test Method for Pressure Rating Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40 and 80 Socket-Type
$55.20 F2390-12 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent (DWV) Pipe and Fittings Having Post-Industrial Recycle Content
$55.20 F2390-07 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent (DWV) Pipe and Fittings Having Post-Industrial Recycle Content
$46.00 F2434-14 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Cross-linked Polyethylene/Aluminum/Cross-linked Polyethylene (PEX-AL-PEX) Tubing
$55.20 F2434-09 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Cross-linked Polyethylene/Aluminum/Cross-linked Polyethylene (PEX-AL-PEX) Tubing
$55.20 F2434-08 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Cross-linked Polyethylene/Aluminum/Cross-linked Polyethylene (PEX-AL-PEX) Tubing
$55.20 F2434-05 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Cross-linked Polyethylene/Aluminum/Cross-linked Polyethylene (PEX-AL-PEX) Tubing
$55.20 F2434-04 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Cross-linked Polyethylene/Aluminum/Cross-linked Polyethylene (PEX-AL-PEX) Tubing
$41.00 F2509-15 Standard Specification for Field-assembled Anodeless Riser Kits for Use on Outside Diameter Controlled Polyethylene and Polyamide-11 (PA11) Gas Distribution Pipe and Tubing
$49.20 F2509-12 Standard Specification for Field-assembled Anodeless Riser Kits for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing
$49.20 F2509-06(2012) Standard Specification for Field-assembled Anodeless Riser Kits for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing
$49.20 F2509-06 Standard Specification for Field-assembled Anodeless Riser Kits for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing
$46.00 F2600-09(2013) Standard Specification for Electrofusion Type Polyamide-11 Fittings for Outside Diameter Controlled Polyamide-11 Pipe and Tubing
$55.20 F2600-09 Standard Specification for Electrofusion Type Polyamide-11 Fittings for Outside Diameter Controlled Polyamide-11 Pipe and Tubing
$55.20 F2600-06 Standard Specification for Electrofusion Type Polyamide-11 Fittings for Outside Diameter Controlled Polyamide-11 Pipe and Tubing
$46.00 F2618-15 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings for Chemical Waste Drainage Systems
$55.20 F2618-09(2014) Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings for Chemical Waste Drainage Systems
$55.20 F2618-09 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings for Chemical Waste Drainage Systems
$67.00 F2620-13 Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings
$80.40 F2620-12 Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings
$80.40 F2620-11e1 Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings
$80.40 F2620-11 Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings
$62.40 F2620-09e1 Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings
$62.40 F2620-09 Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings
$62.40 F2620-06 Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings
$52.00 F2634-15 Standard Test Method for Laboratory Testing of Polyethylene (PE) Butt Fusion Joints using Tensile-Impact Method
$62.40 F2634-10 Standard Test Method for Laboratory Testing of Polyethylene (PE) Butt Fusion Joints using Tensile-Impact Method
$55.20 F2634-07 Standard Test Method for Laboratory Testing of Polyethylene (PE) Butt Fusion Joints using Tensile-Impact Method
$46.00 F2735-09(2016) Standard Specification for Plastic Insert Fittings For SDR9 Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing
$55.20 F2735-09 Standard Specification for Plastic Insert Fittings For SDR9 Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing
$55.20 F2735-08a Standard Specification for Plastic Insert Fittings For SDR9 Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing
$55.20 F2735-08 Standard Specification for Plastic Insert Fittings For SDR9 Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing
$46.00 F2767-12 Standard Specification for Electrofusion Type Polyamide-12 Fittings for Outside Diameter Controlled Polyamide-12 Pipe and Tubing for Gas Distribution
$55.20 F2767-09 Standard Specification for Electrofusion Type Polyamide-12 Fittings for Outside Diameter Controlled Polyamide-12 Pipe and Tubing for Gas Distribution
$52.00 F2785-12 Standard Specification for Polyamide 12 Gas Pressure Pipe, Tubing, and Fittings
$62.40 F2785-10a Standard Specification for Polyamide 12 Gas Pressure Pipe, Tubing, and Fittings
$62.40 F2785-10 Standard Specification for Polyamide 12 Gas Pressure Pipe, Tubing, and Fittings
$62.40 F2785-09e1 Standard Specification for Polyamide 12 Gas Pressure Pipe, Tubing, and Fittings
$46.00 F2817-13 Standard Specification for Poly (Vinyl Chloride) (PVC) Gas Pressure Pipe and Fittings For Maintenance or Repair
$55.20 F2817-10 Standard Specification for Poly (Vinyl Chloride) (PVC) Gas Pressure Pipe and Fittings For Maintenance or Repair
$41.00 F2854-10(2016) Standard Specification for Push-Fit Crosslinked Polyethylene (PEX) Mechanical Fittings for Crosslinked Polyethylene (PEX) Tubing
$49.20 F2854-10 Standard Specification for Push-Fit Crosslinked Polyethylene (PEX) Mechanical Fittings for Crosslinked Polyethylene (PEX) Tubing
$46.00 F2880-14 Standard Specification for Lap-Joint Type Flange Adapters for Polyethylene Pressure Pipe in Nominal Pipe Sizes 3/4 in. to 65 in.
$55.20 F2880-11a Standard Specification for Lap-Joint Type Flange Adapters for Polyethylene Pressure Pipe in Nominal Pipe Sizes ¾ in. to 65 in.
$46.00 F2881-11(2015) Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications
$55.20 F2881-11 Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications
$52.00 F2945-15 Standard Specification for Polyamide 11 Gas Pressure Pipe, Tubing, and Fittings
$62.40 F2945-12a Standard Specification for Polyamide 11 Gas Pressure Pipe, Tubing, and Fittings
$62.40 F2945-12 Standard Specification for Polyamide 11 Gas Pressure Pipe, Tubing, and Fittings
$41.00 F402-05(2012) Standard Practice for Safe Handling of Solvent Cements, Primers, and Cleaners Used for Joining Thermoplastic Pipe and Fittings
$49.20 F402-05 Standard Practice for Safe Handling of Solvent Cements, Primers, and Cleaners Used for Joining Thermoplastic Pipe and Fittings
$49.20 F402-93(1999) Standard Practice for Safe Handling of Solvent Cements, Primers, and Cleaners Used for Joining Thermoplastic Pipe and Fittings
$55.20 F405-13 Standard Specification for Corrugated Polyethylene (PE) Pipe and Fittings (Withdrawn 2015)
$55.20 F405-05 Standard Specification for Corrugated Polyethylene (PE) Pipe and Fittings
$55.20 F405-97 Standard Specification for Corrugated Polyethylene (PE) Tubing and Fittings
$62.40 F409-12 Standard Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings
$62.40 F409-02(2008) Standard Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings
$62.40 F409-02 Standard Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings
$62.40 F409-99a Standard Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings
$46.00 F437-15 Standard Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
$49.20 F437-09 Standard Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
$49.20 F437-06 Standard Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
$49.20 F437-99 Standard Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
$55.20 F438-15 Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40
$55.20 F438-09 Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40
$55.20 F438-04 Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40
$55.20 F438-02e1 Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40
$55.20 F438-02 Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40
$55.20 F438-01 Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40
$55.20 F438-99 Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40
$46.00 F439-13 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
$55.20 F439-12 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
$55.20 F439-11 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
$55.20 F439-09 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
$55.20 F439-06 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
$55.20 F439-05 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
$55.20 F439-02e1 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
$55.20 F439-02 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
$55.20 F439-01 Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
$55.20 F439-99a Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
$55.20 F512-12 Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings for Underground Installation
$55.20 F512-06 Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings for Underground Installation
$55.20 F512-95(2001)e1 Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings for Underground Installation
$55.20 F512-95(2001) Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings for Underground Installation
$55.20 F512-95 Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings for Underground Installation
$46.00 F610/F610M-15 Standard Practice for Evaluating the Quality of Molded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings by the Heat Reversion Technique
$49.20 F610/F610M-10 Standard Test Method for Evaluating the Quality of Molded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings by the Heat Reversion Technique
$49.20 F610/F610M-00a(2009) Standard Test Method for Evaluating the Quality of Molded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings by the Heat Reversion Technique
$49.20 F610/F610M-00a(2005) Standard Test Method for Evaluating the Quality of Molded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings by the Heat Reversion Technique
$49.20 F610/F610M-00a Standard Test Method for Evaluating the Quality of Molded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings by the Heat Reversion Technique
$41.00 F656-15 Standard Specification for Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings
$49.20 F656-10 Standard Specification for Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings
$49.20 F656-08 Standard Specification for Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings
$49.20 F656-02 Standard Specification for Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings
$49.20 F656-96a Standard Specification for Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings
$46.00 F667/F667M-16 Standard Specification for 3 through 24 in. Corrugated Polyethylene Pipe and Fittings
$55.20 F667/F667M-15 Standard Specification for 3 through 24 in. Corrugated Polyethylene Pipe and Fittings
$55.20 F667-12 Standard Specification for 3 through 24 in. Corrugated Polyethylene Pipe and Fittings
$55.20 F667-06 Standard Specification for Large Diameter Corrugated Polyethylene Pipe and Fittings
$49.20 F667-97 Standard Specification for Large Diameter Corrugated Polyethylene Pipe and Fittings
$41.00 F725-03(2013) Standard Practice for Drafting Impact Test Requirements In Thermoplastic Pipe And Fittings Standards
$49.20 F725-03(2008)e1 Standard Practice for Drafting Impact Test Requirements In Thermoplastic Pipe And Fittings Standards
$49.20 F725-03e1 Standard Practice for Drafting Impact Test Requirements In Thermoplastic Pipe And Fittings Standards
$49.20 F725-03 Standard Practice for Drafting Impact Test Requirements In Thermoplastic Pipe And Fittings Standards
$49.20 F725-89(1996) Standard Practice for Drafting Impact Test Requirements In Thermoplastic Pipe And Fittings Standards
$46.00 F794-03(2014) Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter
$55.20 F794-03(2009) Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter
$55.20 F794-03 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter
$55.20 F794-01 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter
$55.20 F794-99 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter
$52.00 F949-15 Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings
$55.20 F949-10 Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings
$55.20 F949-09 Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings
$55.20 F949-06a Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings
$55.20 F949-06 Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings
$55.20 F949-03 Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings
$55.20 F949-01a Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings
$55.20 F949-01 Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings
$55.20 F949-00 Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings
$46.00 D2466-17 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40
$67.00 D3311-17 Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns
$46.00 D5677-17 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines
$46.00 F2135-01(2017)e1 Standard Specification for Molded Drain, Waste, and Vent (DWV) Short-Pattern Plastic Fittings
$52.00 F409-17 Standard Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings
$46.00 F438-17 Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40
$46.00 F512-12(2017) Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings for Underground Installation
$46.00 F2390-12(2017) Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent (DWV) Pipe and Fittings Having Post-Industrial Recycle Content
$41.00 D3567-17 Standard Practice for Determining Dimensions of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings
$46.00 D2729-17 Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings