F2362-03(2013) - $74.00   BUY NOW

Standard Specification for Temperature Monitoring Equipment

ASTM Volume 01.08 Fasteners, Rolling Element Bearings

F2362-03(2013) Publication Description:

This specification covers the requirements for temperature monitoring equipment for use in general applications. Such equipment shall be comprised of a temperature sensor in combination with a signal conditioner, a power supply, and a test device. Temperature sensors covered by this specification are divided into thermocouples, which measure direct or differential temperature, and resistance thermometers, which measure temperature changes based on changes in resistance of sensor element exposed to temperature. Each of these types of sensors may further be classified as follows. Thermocouples can be classified into three classes based on materials and temperature ranges: base metal, noble metal, and refractory metal. Resistance thermometers, on the other hand, can be classified according to the type of sensor element used: metal sensor element (resistance temperature detector or RTD) or semiconductor sensor element (thermistor). RTDs are available in various design configurations including averaging, annular, and combination RTD-thermocouple, while thermistors are classified based on the configuration of the semiconductor sensor element: bead, disc, washer, or rod. Qualification test shall be performed on the equipment and shall comply with the physical property and performance requirements specified.

International Classification for Standards (ICS)

ICS Classification Field ICS Field Sub-Group and Number
ICS-17-Metrology ICS Temperature-Measuring Instruments (17.200.20)

ICS Related Standards

Cart Document Number Document Title
$46.00 D6176-97(2015) Standard Practice for Measuring Surface Atmospheric Temperature with Electrical Resistance Temperature Sensors
$59.80 D6176-97(2008) Standard Practice for Measuring Surface Atmospheric Temperature with Electrical Resistance Temperature Sensors
$59.80 D6176-97(2003) Standard Practice for Measuring Surface Atmospheric Temperature with Electrical Resistance Temperature Sensors
$46.00 D6744-06(2017)e1 Standard Test Method for Determination of the Thermal Conductivity of Anode Carbons by the Guarded Heat Flow Meter Technique
$59.80 D6744-06(2011)e1 Standard Test Method for Determination of the Thermal Conductivity of Anode Carbons by the Guarded Heat Flow Meter Technique
$59.80 D6744-06(2011) Standard Test Method for Determination of the Thermal Conductivity of Anode Carbons by the Guarded Heat Flow Meter Technique
$59.80 D6744-06 Standard Test Method for Determination of the Thermal Conductivity of Anode Carbons by the Guarded Heat Flow Meter Technique
$59.80 D6744-01 Standard Test Method for Determination of the Thermal Conductivity of Anode Carbons by the Guarded Heat Flow Meter Technique
$55.35 D7962-16 Standard Practice for Determination of Minimum Immersion Depth and Assessment of Temperature Sensor Measurement Drift
$55.35 D7962-15a Standard Practice for Determination of Minimum Immersion Depth and Assessment of Temperature Sensor Measurement Drift
$55.35 D7962-15 Standard Practice for Determination of Minimum Immersion Depth and Assessment of Temperature Sensor Measurement Drift
$74.00 E1-14 Standard Specification for ASTM Liquid-in-Glass Thermometers
$88.80 E1-13 Standard Specification for ASTM Liquid-in-Glass Thermometers
$96.00 E1-07 Standard Specification for ASTM Liquid-in-Glass Thermometers
$96.00 E1-05 Standard Specification for ASTM Liquid-in-Glass Thermometers
$96.00 E1-03a Standard Specification for ASTM Liquid-in-Glass Thermometers
$96.00 E1-03 Standard Specification for ASTM Thermometers
$96.00 E1-01 Standard Specification for ASTM Thermometers
$96.00 E1-98e1 Standard Specification for ASTM Thermometers
$96.00 E1-98 Standard Specification for ASTM Thermometers
$41.00 E1061-01(2014) Standard Specification for Direct-Reading Liquid Crystal Forehead Thermometers
$55.35 E1061-01(2007) Standard Specification for Direct-Reading Liquid Crystal Forehead Thermometers
$55.35 E1061-01 Standard Specification for Direct-Reading Liquid Crystal Forehead Thermometers
$55.35 E1061-94(2000) Standard Specification for Direct-Reading Liquid Crystal Forehead Thermometers
$41.00 E1104-98(2016) Standard Specification for Clinical Thermometer Probe Covers and Sheaths
$55.35 E1104-98(2009) Standard Specification for Clinical Thermometer Probe Covers and Sheaths
$55.35 E1104-98(2003) Standard Specification for Clinical Thermometer Probe Covers and Sheaths
$55.35 E1104-98 Standard Specification for Clinical Thermometers Probe Covers and Sheaths
$46.00 E1129/E1129M-15 Standard Specification for Thermocouple Connectors
$59.80 E1129/E1129M-14 Standard Specification for Thermocouple Connectors
$59.80 E1129/E1129M-08e1 Standard Specification for Thermocouple Connectors
$59.80 E1129/E1129M-98(2002) Standard Specification for Thermocouple Connectors
$59.80 E1129/E1129M-98 Standard Specification for Thermocouple Connectors
$46.00 E1137/E1137M-08(2014) Standard Specification for Industrial Platinum Resistance Thermometers
$59.80 E1137/E1137M-08 Standard Specification for Industrial Platinum Resistance Thermometers
$59.80 E1137/E1137M-04 Standard Specification for Industrial Platinum Resistance Thermometers
$59.80 E1137-97 Standard Specification for Industrial Platinum Resistance Thermometers
$41.00 E1159-15 Standard Specification for Thermocouple Materials, Platinum-Rhodium Alloys, and Platinum
$55.35 E1159-98(2009) Standard Specification for Thermocouple Materials, Platinum-Rhodium Alloys, and Platinum
$55.35 E1159-98(2003) Standard Specification for Thermocouple Materials, Platinum-Rhodium Alloys, and Platinum
$55.35 E1159-98 Standard Specification for Thermocouple Materials, Platinum-Rhodium Alloys, and Platinum
$59.80 E1256-15 Standard Test Methods for Radiation Thermometers (Single Waveband Type)
$59.80 E1256-11a Standard Test Methods for Radiation Thermometers (Single Waveband Type)
$59.80 E1256-11 Standard Test Methods for Radiation Thermometers (Single Waveband Type)
$59.80 E1256-10 Standard Test Methods for Radiation Thermometers (Single Waveband Type)
$59.80 E1256-95(2007) Standard Test Methods for Radiation Thermometers (Single Waveband Type)
$59.80 E1256-95 Standard Test Methods for Radiation Thermometers (Single Waveband Type)
$59.80 E1256-95(2001) Standard Test Methods for Radiation Thermometers (Single Waveband Type)
$41.00 E1299-96(2016) Standard Specification for Reusable Phase-Change-Type Fever Thermometer for Intermittent Determination of Human Temperature
$55.35 E1299-96(2010) Standard Specification for Reusable Phase-Change-Type Fever Thermometer for Intermittent Determination of Human Temperature
$55.35 E1299-96 Standard Specification for Reusable Phase-Change-Type Fever Thermometer for Intermittent Determination of Human Temperature
$55.35 E1299-96(2002) Standard Specification for Reusable Phase-Change-Type Fever Thermometer for Intermittent Determination of Human Temperature
$46.00 E1350-13 Standard Guide for Testing Sheathed Thermocouples, Thermocouples Assemblies, and Connecting Wires Prior to, and After Installation or Service
$59.80 E1350-07 Standard Guide for Testing Sheathed Thermocouples, Thermocouples Assemblies, and Connecting Wires Prior to, and After Installation or Service
$59.80 E1350-97(2001) Standard Guide for Testing Sheathed Thermocouples Prior to, During, and After Installation
$59.80 E1350-97 Standard Test Methods for Testing Sheathed Thermocouples Prior to, During, and After Installation
$59.80 E1363-13 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
$59.80 E1363-08 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
$59.80 E1363-03 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
$55.35 E1363-97e1 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
$52.00 E1502-16 Standard Guide for Use of Fixed-Point Cells for Reference Temperatures
$65.00 E1502-10 Standard Guide for Use of Fixed-Point Cells for Reference Temperatures
$59.80 E1502-98(2003)e1 Standard Guide for Use of Freezing-Point Cells for Reference Temperatures
$59.80 E1502-98 Standard Guide for Use of Freezing-Point Cells for Reference Temperatures
$41.00 E1543-14 Standard Practice for Noise Equivalent Temperature Difference of Thermal Imaging Systems
$55.35 E1543-00(2006) Standard Test Method for Noise Equivalent Temperature Difference of Thermal Imaging Systems
$55.35 E1543-00 Standard Test Method for Noise Equivalent Temperature Difference of Thermal Imaging Systems
$59.80 E1582-14 Standard Practice for Calibration of Temperature Scale for Thermogravimetry
$59.80 E1582-04 Standard Practice for Calibration of Temperature Scale for Thermogravimetry
$59.80 E1582-00 Standard Practice for Calibration of Temperature Scale for Thermogravimetry
$59.80 E1582-93 Standard Practice for Calibration of Temperature Scale for Thermogravimetry
$41.00 E1594-16 Standard Guide for Expression of Temperature
$55.35 E1594-11 Standard Guide for Expression of Temperature
$55.35 E1594-06 Standard Guide for Expression of Temperature
$55.35 E1594-99 Standard Guide for Expression of Temperature
$46.00 E1652-15 Standard Specification for Magnesium Oxide and Aluminum Oxide Powder and Crushable Insulators Used in the Manufacture of Base Metal Thermocouples, Metal-Sheathed Platinum Resistance Thermometers, and Noble Metal Thermocouples
$59.80 E1652-14a Standard Specification for Magnesium Oxide and Aluminum Oxide Powder and Crushable Insulators Used in the Manufacture of Base Metal Thermocouples, Metal-Sheathed Platinum Resistance Thermometers, and Noble Metal Thermocouples
$59.80 E1652-14 Standard Specification for Magnesium Oxide and Aluminum Oxide Powder and Crushable Insulators Used in the Manufacture of Base Metal Thermocouples, Metal-Sheathed Platinum Resistance Thermometers, and Noble Metal Thermocouples
$59.80 E1652-10 Standard Specification for Magnesium Oxide and Aluminum Oxide Powder and Crushable Insulators Used in the Manufacture of Metal-Sheathed Platinum Resistance Thermometers, Base Metal Thermocouples, and Noble Metal Thermocouples
$59.80 E1652-03 Standard Specification for Magnesium Oxide and Aluminum Oxide Powder and Crushable Insulators Used in the Manufacture of Metal-Sheathed Platinum Resistance Thermometers, Base Metal Thermocouples, and Noble Metal Thermocouples
$59.80 E1652-00 Standard Specification for Magnesium Oxide and Aluminum Oxide Powder and Crushable Insulators Used in the Manufacture of Metal-Sheathed Platinum Resistance Thermometers, Base Metal Thermocouples, and Noble Metal Thermocouples
$46.00 E1684/E1684M-15 Standard Specification for Miniature Thermocouple Connectors
$59.80 E1684-10 Standard Specification for Miniature Thermocouple Connectors
$55.35 E1684-05 Standard Specification for Miniature Thermocouple Connectors
$55.35 E1684-00 Standard Specification for Miniature Thermocouple Connectors
$46.00 E1750-10(2016) Standard Guide for Use of Water Triple Point Cells
$59.80 E1750-10 Standard Guide for Use of Water Triple Point Cells
$59.80 E1750-09 Standard Guide for Use of Water Triple Point Cells
$59.80 E1750-02 Standard Guide for Use of Water Triple Point Cells
$59.80 E1750-95 Standard Guide for Use of Water Triple Point Cells
$86.00 E1751/E1751M-15 Standard Guide for Temperature Electromotive Force (emf) Tables for Non-Letter Designated Thermocouple Combinations
$103.20 E1751/E1751M-09e1 Standard Guide for Temperature Electromotive Force (emf) Tables for Non-Letter Designated Thermocouple Combinations
$103.20 E1751-00 Standard Guide for Temperature Electromotive Force (emf) Tables for Non-Letter Designated Thermocouple Combinations (Withdrawn 2009)
$41.00 E1860-13 Standard Test Method for Elapsed Time Calibration of Thermal Analyzers
$55.35 E1860-07 Standard Test Method for Elapsed Time Calibration Thermal Analyzers
$55.35 E1860-02 Standard Test Method for Elapsed Time Calibration Thermal Analyzers
$55.35 E1860-97a Standard Test Method for Elapsed Time Calibration Thermal Analyzers
$46.00 E1867-16 Standard Test Methods for Temperature Calibration of Dynamic Mechanical Analyzers
$59.80 E1867-13 Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers
$59.80 E1867-12 Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers
$59.80 E1867-11 Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers
$59.80 E1867-06 Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers
$55.35 E1867-01 Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers
$55.35 E1867-97 Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers
$41.00 E1953-14 Standard Practice for Description of Thermal Analysis and Rheology Apparatus
$55.35 E1953-07(2013) Standard Practice for Description of Thermal Analysis and Rheology Apparatus
$55.35 E1953-07 Standard Practice for Description of Thermal Analysis and Rheology Apparatus
$55.35 E1953-05 Standard Practice for Description of Thermal Analysis Apparatus
$55.35 E1953-02 Standard Practice for Description of Thermal Analysis Apparatus
$55.35 E1953-98 Standard Practice for Description of Thermal Analysis Apparatus
$46.00 E2046-14 Standard Test Method for Reaction Induction Time by Thermal Analysis
$59.80 E2046-08 Standard Test Method for Reaction Induction Time by Thermal Analysis
$59.80 E2046-03 Standard Test Method for Reaction Induction Time by Thermal Analysis
$55.35 E2046-99 Standard Test Method for Reaction Induction Time by Thermal Analysis
$67.00 E2067-15 Standard Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests
$80.40 E2067-12 Standard Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests
$80.40 E2067-08 Standard Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests
$80.40 E2067-03 Standard Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests
$80.40 E2067-02 Standard Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests
$80.40 E2067-00a Standard Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests
$46.00 E207-08(2015)e1 Standard Test Method for Thermal EMF Test of Single Thermoelement Materials by Comparison with a Reference Thermoelement of Similar EMF-Temperature Properties
$59.80 E207-08(2015) Standard Test Method for Thermal EMF Test of Single Thermoelement Materials by Comparison with a Reference Thermoelement of Similar EMF-Temperature Properties
$59.80 E207-08 Standard Test Method for Thermal EMF Test of Single Thermoelement Materials by Comparison with a Reference Thermoelement of Similar EMF-Temperature Properties
$59.80 E207-00 Standard Test Method for Thermal EMF Test of Single Thermoelement Materials By Comparison with a Reference Thermoelement of Similar EMF-Temperature Properties
$52.00 E220-13 Standard Test Method for Calibration of Thermocouples By Comparison Techniques
$65.00 E220-07a Standard Test Method for Calibration of Thermocouples By Comparison Techniques
$65.00 E220-07e1 Standard Test Method for Calibration of Thermocouples By Comparison Techniques
$65.00 E220-07 Standard Test Method for Calibration of Thermocouples By Comparison Techniques
$65.00 E220-02 Standard Test Method for Calibration of Thermocouples By Comparison Techniques
$65.00 E220-86(1996)e1 Standard Test Method for Calibration of Thermocouples By Comparison Techniques
$52.00 E2251-14 Standard Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids
$65.00 E2251-11 Standard Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids
$65.00 E2251-10 Standard Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids
$65.00 E2251-07 Standard Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids
$65.00 E2251-03a Standard Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids
$65.00 E2251-03 Standard Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids
$116.40 E230/E230M-12 Standard Specification and Temperature-Electromotive Force (emf) Tables for Standardized Thermocouples
$116.40 E230/E230M-11e1 Standard Specification and Temperature-Electromotive Force (emf) Tables for Standardized Thermocouples
$116.40 E230/E230M-11 Standard Specification and Temperature-Electromotive Force (emf) Tables for Standardized Thermocouples
$116.40 E230-03 Standard Specification and Temperature-Electromotive Force (EMF) Tables for Standardized Thermocouples
$116.40 E230-98 Standard Specification and Temperature-Electromotive Force (EMF) Tables for Standardized Thermocouples
$46.00 E2488-09(2014) Standard Guide for the Preparation and Evaluation of Liquid Baths Used for Temperature Calibration by Comparison
$59.80 E2488-09 Standard Guide for the Preparation and Evaluation of Liquid Baths Used for Temperature Calibration by Comparison
$65.00 E2593-12 Standard Guide for Accuracy Verification of Industrial Platinum Resistance Thermometers
$65.00 E2593-11e1 Standard Guide for Accuracy Verification of Industrial Platinum Resistance Thermometers
$65.00 E2593-11 Standard Guide for Accuracy Verification of Industrial Platinum Resistance Thermometers
$65.00 E2593-07e1 Standard Guide for Accuracy Verification of Industrial Platinum Resistance Thermometers
$65.00 E2593-07 Standard Guide for Accuracy Verification of Industrial Platinum Resistance Thermometers
$52.00 E2623-14 Standard Practice for Reporting Thermometer Calibrations
$65.00 E2623-08e1 Standard Practice for Reporting Thermometer Calibrations
$46.00 E2730-10(2015)e2 Standard Practice for Calibration and Use of Thermocouple Reference Junction Probes in Evaluation of Electronic Reference Junction Compensation Circuits
$59.80 E2730-10(2015)e1 Standard Practice for Calibration and Use of Thermocouple Reference Junction Probes in Evaluation of Electronic Reference Junction Compensation Circuits
$59.80 E2730-10 Standard Practice for Calibration and Use of Thermocouple Reference Junction Probes in Evaluation of Electronic Reference Junction Compensation Circuits
$41.00 E2744-16 Standard Test Method for Pressure Calibration of Thermal Analyzers
$55.35 E2744-10(2015) Standard Test Method for Pressure Calibration of Thermal Analyzers
$52.00 E2758-15a Standard Guide for Selection and Use of Wideband, Low Temperature Infrared Thermometers
$65.00 E2758-15 Standard Guide for Selection and Use of Wideband, Low Temperature Infrared Thermometers
$65.00 E2758-10 Standard Guide for Selection and Use of Wideband, Low Temperature Infrared Thermometers
$46.00 E2820-13 Standard Test Method for Evaluating Thermal EMF Properties of Base-Metal Thermocouple Connectors
$59.80 E2820-11 Standard Test Method for Evaluating Thermal EMF Properties of Base-Metal Thermocouple Connectors
$67.00 E2846-14 Standard Guide for Thermocouple Verification
$80.40 E2846-11 Standard Guide for Thermocouple Verification
$52.00 E2847-14 Standard Test Method for Calibration and Accuracy Verification of Wideband Infrared Thermometers
$65.00 E2847-13e1 Standard Test Method for Calibration and Accuracy Verification of Wideband Infrared Thermometers
$65.00 E2847-13 Standard Practice for Calibration and Accuracy Verification of Wideband Infrared Thermometers
$65.00 E2847-11 Standard Practice for  Calibration and Accuracy Verification of Wideband Infrared Thermometers
$52.00 E344-16 Terminology Relating to Thermometry and Hydrometry
$65.00 E344-13 Terminology Relating to Thermometry and Hydrometry
$65.00 E344-12 Terminology Relating to Thermometry and Hydrometry
$65.00 E344-10 Terminology Relating to Thermometry and Hydrometry
$65.00 E344-07 Terminology Relating to Thermometry and Hydrometry
$65.00 E344-06 Terminology Relating to Thermometry and Hydrometry
$65.00 E344-02 Terminology Relating to Thermometry and Hydrometry
$65.00 E344-01a Terminology Relating to Thermometry and Hydrometry
$65.00 E344-01 Terminology Relating to Thermometry and Hydrometry
$65.00 E344-00 Terminology Relating to Thermometry and Hydrometry
$52.00 E452-02(2013) Standard Test Method for Calibration of Refractory Metal Thermocouples Using a Radiation Thermometer
$65.00 E452-02(2007) Standard Test Method for Calibration of Refractory Metal Thermocouples Using a Radiation Thermometer
$65.00 E452-02 Standard Test Method for Calibration of Refractory Metal Thermocouples Using a Radiation Thermometer
$65.00 E452-97 Standard Test Method for Calibration of Refractory Metal Thermocouples Using a Radiation Thermometer
$41.00 E574-13 Standard Specification for Duplex, Base Metal Thermocouple Wire With Glass Fiber or Silica Fiber Insulation
$55.35 E574-06 Standard Specification for Duplex, Base Metal Thermocouple Wire With Glass Fiber or Silica Fiber Insulation
$55.35 E574-00 Standard Specification for Duplex, Base Metal Thermocouple Wire With Glass Fiber or Silica Fiber Insulation
$46.00 E585/E585M-12 Standard Specification for Compacted Mineral-Insulated, Metal-Sheathed, Base Metal Thermocouple Cable
$59.80 E585/E585M-09 Standard Specification for Compacted Mineral-Insulated, Metal-Sheathed, Base Metal Thermocouple Cable
$59.80 E585/E585M-04 Standard Specification for Compacted Mineral-Insulated, Metal-Sheathed, Base Metal Thermocouple Cable
$59.80 E585/E585M-01a Standard Specification for Compacted Mineral-Insulated, Metal-Sheathed, Base Metal Thermocouple Cable
$59.80 E585/E585M-01 Standard Specification for Compacted Mineral-Insulated, Metal-Sheathed, Base Metal Thermocouple Cable
$46.00 E601-15 Standard Guide for Measuring Electromotive Force (emf) Stability of Base-Metal Thermoelement Materials with Time in Air
$59.80 E601-07a Standard Test Method for Measuring Electromotive Force (emf) Stability of Base-Metal Thermoelement Materials with Time in Air
$59.80 E601-07e1 Standard Test Method for Measuring Electromotive Force (emf) Stability of Base-Metal Thermoelement Materials with Time in Air
$55.35 E601-07 Standard Test Method for Measuring Electromotive Force (emf) Stability of Base-Metal Thermoelement Materials with Time in Air
$55.35 E601-81(1997) Standard Test Method for Comparing EMF Stability of Single-Element Base-Metal Thermocouple Materials in Air (Withdrawn 2006)
$46.00 E608/E608M-13 Standard Specification for Mineral-Insulated, Metal-Sheathed Base Metal Thermocouples
$59.80 E608/E608M-06 Standard Specification for Mineral-Insulated, Metal-Sheathed Base Metal Thermocouples
$59.80 E608/E608M-00(2004) Standard Specification for Mineral-Insulated, Metal-Sheathed Base Metal Thermocouples
$59.80 E608/E608M-00 Standard Specification for Mineral-Insulated, Metal-Sheathed Base-Metal Thermocouples
$46.00 E633-13 Standard Guide for Use of Thermocouples in Creep and Stress-Rupture Testing to 1800°F (1000°C) in Air
$59.80 E633-00(2005) Standard Guide for Use of Thermocouples in Creep and Stress-Rupture Testing to 1800°F (1000°C) in Air
$59.80 E633-00 Standard Guide for Use of Thermocouples in Creep and Stress-Rupture Testing to 1800°F (1000°C) in Air
$59.80 E639-78(1996)e1 Standard Test Method for Measuring Total-Radiance Temperature of Heated Surfaces Using a Radiation Pyrometer
$59.80 E639-78(2002) Standard Test Method for Measuring Total-Radiance Temperature of Heated Surfaces Using a Radiation Pyrometer (Withdrawn 2011)
$67.00 E644-11 Standard Test Methods for Testing Industrial Resistance Thermometers
$65.00 E644-09 Standard Test Methods for Testing Industrial Resistance Thermometers
$65.00 E644-06 Standard Test Methods for Testing Industrial Resistance Thermometers
$65.00 E644-04 Standard Test Methods for Testing Industrial Resistance Thermometers
$65.00 E644-02 Standard Test Methods for Testing Industrial Resistance Thermometers
$65.00 E644-98 Standard Test Methods for Testing Industrial Resistance Thermometers
$41.00 E696-07(2013) Standard Specification for Tungsten-Rhenium Alloy Thermocouple Wire
$55.35 E696-07 Standard Specification for Tungsten-Rhenium Alloy Thermocouple Wire
$55.35 E696-00 Standard Specification for Tungsten-Rhenium Alloy Thermocouple Wire
$65.00 E77-14 Standard Test Method for Inspection and Verification of Thermometers
$65.00 E77-07 Standard Test Method for Inspection and Verification of Thermometers
$65.00 E77-98(2003) Standard Test Method for Inspection and Verification of Thermometers
$65.00 E77-98 Standard Test Method for Inspection and Verification of Thermometers
$59.80 E780-06 Standard Test Method for Measuring the Insulation Resistance of Mineral-Insulated, Metal-Sheathed Thermocouples and Thermocouple Cable at Room Temperature
$55.35 E780-92(1998) Standard Test Method for Measuring the Insulation Resistance of Sheathed Thermocouple Material at Room Temperature
$41.00 E825-98(2016) Standard Specification for Phase Change-Type Disposable Fever Thermometer for Intermittent Determination of Human Temperature
$55.35 E825-98(2009) Standard Specification for Phase Change-Type Disposable Fever Thermometer for Intermittent Determination of Human Temperature
$55.35 E825-98(2003) Standard Specification for Phase Change-Type Disposable Fever Thermometer for Intermittent Determination of Human Temperature
$55.35 E825-98 Standard Specification for Phase Change-Type Disposable Fever Thermometer for Intermittent Determination of Human Temperature
$46.00 E879-12 Standard Specification for Thermistor Sensors for General Purpose and Laboratory Temperature Measurements
$59.80 E879-01(2007) Standard Specification for Thermistor Sensors for Clinical Laboratory Temperature Measurements
$59.80 E879-01 Standard Specification for Thermistor Sensors for Clinical Laboratory Temperature Measurements
$59.80 E879-93 Standard Specification for Thermistor Sensors for Clinical Laboratory Temperature Measurements
$80.40 E988-96 Standard Temperature-Electromotive Force (EMF) Tables for Tungsten-Rhenium Thermocouples
$80.40 E988-96(2002) Standard Temperature-Electromotive Force (EMF) Tables for Tungsten-Rhenium Thermocouples (Withdrawn 2011)
$88.80 F2362-03(2009) Standard Specification for Temperature Monitoring Equipment
$88.80 F2362-03 Standard Specification for Temperature Monitoring Equipment
$46.00 G179-04(2011) Standard Specification for Metal Black Panel and White Panel Temperature Devices for Natural Weathering Tests
$59.80 G179-04 Standard Specification for Metal Black Panel and White Panel Temperature Devices for Natural Weathering Tests
$41.00 D7962-17 Standard Practice for Determination of Minimum Immersion Depth and Assessment of Temperature Sensor Measurement Drift
$46.00 E1256-17 Standard Test Methods for Radiation Thermometers (Single Waveband Type)
$46.00 E1363-16 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
$46.00 E780-17 Standard Test Method for Measuring the Insulation Resistance of Mineral-Insulated, Metal-Sheathed Thermocouples and Mineral-Insulated, Metal-Sheathed Cable at Room Temperature
$59.80 E780-06(2011) Standard Test Method for Measuring the Insulation Resistance of Mineral-Insulated, Metal-Sheathed Thermocouples and Thermocouple Cable at Room Temperature
$46.00 E1582-17 Standard Test Method for Temperature Calibration of Thermogravimetric Analyzers
$52.00 E77-14e1 Standard Test Method for Inspection and Verification of Thermometers
$97.00 E230/E230M-17 Standard Specification for Temperature-Electromotive Force (emf) Tables for Standardized Thermocouples
$52.00 E2593-17 Standard Guide for Accuracy Verification of Industrial Platinum Resistance Thermometers