E2479-06 - $55.20   BUY NOW

Standard Practice for Measuring the Ultrasonic Velocity in Polyethylene Tank Walls Using Lateral Longitudinal (LCR) Waves

ASTM Volume 03.04 Nondestructive Testing (E2374 - latest)

E2479-06 Publication Description:

This practice covers a procedure for measuring the ultrasonic velocities in the outer wall of polyethylene storage tanks. The practice is intended for application to the outer surfaces of the wall of polyethylene tanks. An angle beam lateral longitudinal (LCR) wave is excited with wedges along a circumferential chord of the tank wall. A digital ultrasonic flaw detector is used with sending-receiving search units in through transmission mode. The observed velocity is temperature corrected and compared to the expected velocity for a new, unexposed sample of material, which is the same as the material being evaluated. The difference between the observed and temperature corrected velocities determines the degree of UV exposure of the tank.

International Classification for Standards (ICS)

ICS Classification Field ICS Field Sub-Group and Number
ICS-23-Fluid ICS Stationary Containers/Tanks (23.020.10)
ICS-83-Rubber ICS Plastics-General (83.080.01)

ICS Related Standards

Cart Document Number Document Title
$46.00 C1393-14 Standard Specification for Perpendicularly Oriented Mineral Fiber Roll and Sheet Thermal Insulation for Pipes and Tanks
$55.20 C1393-11 Standard Specification for Perpendicularly Oriented Mineral Fiber Roll and Sheet Thermal Insulation for Pipes and Tanks
$55.20 C1393-08 Standard Specification for Perpendicularly Oriented Mineral Fiber Roll and Sheet Thermal Insulation for Pipes and Tanks
$55.20 C1393-00a(2006)e1 Standard Specification for Perpendicularly Oriented Mineral Fiber Roll and Sheet Thermal Insulation for Pipes and Tanks
$55.20 C1393-00a(2006) Standard Specification for Perpendicularly Oriented Mineral Fiber Roll and Sheet Thermal Insulation for Pipes and Tanks
$55.20 C1393-00a Standard Specification for Perpendicularly Oriented Mineral Fiber Roll and Sheet Thermal Insulation for Pipes and Tanks
$55.20 C1393-00 Standard Specification for Perpendicularly Oriented Mineral Fiber Roll and Sheet Thermal Insulation for Pipes and Tanks
$46.00 D1998-15 Standard Specification for Polyethylene Upright Storage Tanks
$55.20 D1998-13 Standard Specification for Polyethylene Upright Storage Tanks
$55.20 D1998-06 Standard Specification for Polyethylene Upright Storage Tanks
$55.20 D1998-04 Standard Specification for Polyethylene Upright Storage Tanks
$55.20 D1998-97 Standard Specification for Polyethylene Upright Storage Tanks
$52.00 D3299-10 Standard Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
$62.40 D3299-00 Standard Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
$52.00 D4097-01(2010) Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
$62.40 D4097-01 Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
$62.40 D4097-95ae3 Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
$52.00 E1067/E1067M-11 Standard Practice for Acoustic Emission Examination of Fiberglass Reinforced Plastic Resin (FRP) Tanks/Vessels
$62.40 E1067-01 Standard Practice for Acoustic Emission Examination of Fiberglass Reinforced Plastic Resin (FRP) Tanks/Vessels
$62.40 E1067-96 Standard Practice for Acoustic Emission Examination of Fiberglass Reinforced Plastic Resin (FRP) Tanks/Vessels
$55.20 E1888/E1888M-12 Standard Practice for Acoustic Emission Examination of Pressurized Containers Made of Fiberglass Reinforced Plastic with Balsa Wood Cores
$55.20 E1888/E1888M-07 Standard Practice for Acoustic Emission Examination of Pressurized Containers Made of Fiberglass Reinforced Plastic with Balsa Wood Cores
$55.20 E1888/E1888M-02 Standard Test Method for Acoustic Emission Examination of Pressurized Containers Made of Fiberglass Reinforced Plastic with Balsa Wood Cores
$55.20 E1888-97 Standard Test Method for Acoustic Emission Testing of Pressurized Containers Made of Fiberglass Reinforced Plastic with Balsa Wood Cores
$62.40 E1930/E1930M-12 Standard Practice for Examination of Liquid-Filled Atmospheric and Low-Pressure Metal Storage Tanks Using Acoustic Emission
$62.40 E1930-07 Standard Practice for Examination of Liquid-Filled Atmospheric and Low-Pressure Metal Storage Tanks Using Acoustic Emission
$62.40 E1930-02 Standard Test Method for Examination of Liquid Filled Atmospheric and Low Pressure Metal Storage Tanks Using Acoustic Emission
$52.00 E1990-16 Standard Guide for Performing Evaluations of Underground Storage Tank Systems for Operational Conformance with 40 CFR, Part 280 Regulations
$62.40 E1990-14 Standard Guide for Performing Evaluations of Underground Storage Tank Systems for Operational Conformance with 40 CFR, Part 280 Regulations
$55.20 E1990-98(2005) Standard Guide for Performing Evaluations of Underground Storage Tank Systems for Operational Conformance with 40 CFR, Part 280 Regulations
$55.20 E1990-98 Standard Guide for Performing Evaluations of Underground Storage Tank Systems for Operational Conformance with 40 CFR, Part 280 Regulations
$46.00 E2479-16 Standard Practice for Measuring the Ultrasonic Velocity in Polyethylene Tank Walls Using Lateral Longitudinal (LCR) Waves
$55.20 E2479-11 Standard Practice for Measuring the Ultrasonic Velocity in Polyethylene Tank Walls Using Lateral Longitudinal (LCR) Waves
$49.20 F1437-06 Standard Practice for Inclined Cargo Tank Ladders (Withdraw 2010)
$49.20 F1437-01 Standard Practice for Inclined Cargo Tank Ladders
$49.20 F1437-92 Standard Practice for Inclined Cargo Tank Ladders
$41.00 F1657/F1657M-96(2012)e1 Standard Practice for Emergency Joining of Booms with Incompatible Connectors
$49.20 F1657-96(2007) Standard Practice for Emergency Joining of Booms with Incompatible Connectors
$49.20 F1657-96(2002) Standard Practice for Emergency Joining of Booms with Incompatible Connectors
$49.20 F1657-96 Standard Practice for Emergency Joining of Booms with Incompatible Connectors
$55.20 F2438-04(2010) Standard Specification for Oil Spill Response Boom Connection: Slide Connector
$55.20 F2438-04 Standard Specification for Oil Spill Response Boom Connection: Slide Connector
$49.20 F991M-12 Standard Specification for Docking/Drain Plug and Boss Assemblies [Metric] (Withdrawn 2013)
$49.20 F991M-04(2008) Standard Specification for Docking/Drain Plug and Boss Assemblies [Metric]
$49.20 F991M-04 Standard Specification for Docking/Drain Plug and Boss Assemblies [Metric]
$49.20 F991M-95 Standard Specification for Docking/Drain Plug and Boss Assemblies [Metric] (Withdrawn 2004)
$46.00 E1888/E1888M-17 Standard Practice for Acoustic Emission Examination of Pressurized Containers Made of Fiberglass Reinforced Plastic with Balsa Wood Cores
$52.00 E1930/E1930M-17 Standard Practice for Examination of Liquid-Filled Atmospheric and Low-Pressure Metal Storage Tanks Using Acoustic Emission
$46.00 F2438-04(2017) Standard Specification for Oil Spill Response Boom Connection: Slide Connector
$41.00 C1181-00(2012) Standard Test Methods for Compressive Creep of Chemical-Resistant Polymer Machinery Grouts
$49.20 C1181-00(2005) Standard Test Methods for Compressive Creep of Chemical-Resistant Polymer Machinery Grouts
$55.20 C1181-00 Standard Test Methods for Compressive Creep of Chemical-Resistant Polymer Machinery Grouts
$49.20 C1444-00 Standard Test Method for Measuring the Angle of Repose of Free-Flowing Mold Powders (Withdrawn 2005)
$46.00 C613-14 Standard Test Method for Constituent Content of Composite Prepreg by Soxhlet Extraction
$55.20 C613-97(2008)e2 Standard Test Method for Constituent Content of Composite Prepreg by Soxhlet Extraction
$55.20 C613M-97(2008)e1 Standard Test Method for Constituent Content of Composite Prepreg by Soxhlet Extraction
$55.20 C613/C613M-97(2008) Standard Test Method for Constituent Content of Composite Prepreg by Soxhlet Extraction
$55.20 C613/C613M-97(2003)e1 Standard Test Method for Constituent Content of Composite Prepreg by Soxhlet Extraction
$55.20 C613/C613M-97 Standard Test Method for Constituent Content of Composite Prepreg by Soxhlet Extraction
$49.20 D1042-12 Standard Test Method for Linear Dimensional Changes of Plastics Caused by Exposure to Heat and Moisture
$49.20 D1042-06 Standard Test Method for Linear Dimensional Changes of Plastics Under Accelerated Service Conditions
$49.20 D1042-01a Standard Test Method for Linear Dimensional Changes of Plastics Under Accelerated Service Conditions
$49.20 D1042-01 Standard Test Method for Linear Dimensional Changes of Plastics Under Accelerated Service Conditions
$49.20 D1042-93 Standard Test Method for Linear Dimensional Changes of Plastics Under Accelerated Service Conditions
$52.00 D1043-16 Standard Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test
$62.40 D1043-10 Standard Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test
$62.40 D1043-09 Standard Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test
$62.40 D1043-02 Standard Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test
$62.40 D1043-99 Standard Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test
$46.00 D1044-13 Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion
$55.20 D1044-08e1 Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion
$55.20 D1044-08 Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion
$55.20 D1044-05 Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion
$55.20 D1044-99 Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion
$41.00 D1203-16 Standard Test Methods for Volatile Loss From Plastics Using Activated Carbon Methods
$49.20 D1203-10 Standard Test Methods for Volatile Loss From Plastics Using Activated Carbon Methods
$49.20 D1203-94(2003) Standard Test Methods for Volatile Loss From Plastics Using Activated Carbon Methods
$49.20 D1203-94(1999)e1 Standard Test Methods for Volatile Loss From Plastics Using Activated Carbon Methods
$46.00 D1435-13 Standard Practice for Outdoor Weathering of Plastics
$55.20 D1435-05 Standard Practice for Outdoor Weathering of Plastics
$55.20 D1435-99 Standard Practice for Outdoor Weathering of Plastics
$55.20 D1435-94 Standard Practice for Outdoor Weathering of Plastics
$46.00 D1499-13 Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Plastics
$55.20 D1499-05 Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Plastics
$49.20 D1499-99 Standard Practice Filtered Open-Flame Carbon-Arc Type Exposures of Plastics
$46.00 D1505-10 Standard Test Method for Density of Plastics by the Density-Gradient Technique
$55.20 D1505-03 Standard Test Method for Density of Plastics by the Density-Gradient Technique
$55.20 D1505-98e1 Standard Test Method for Density of Plastics by the Density-Gradient Technique
$55.20 D1505-85(1990)e1 Standard Test Method for Density of Plastics by the Density-Gradient Technique
$55.20 D1525-09 Standard Test Method for Vicat Softening Temperature of Plastics
$55.20 D1525-07 Standard Test Method for Vicat Softening Temperature of Plastics
$55.20 D1525-06 Standard Test Method for Vicat Softening Temperature of Plastics
$55.20 D1525-00 Standard Test Method for Vicat Softening Temperature of Plastics
$49.20 D1525-87 Standard Test Method for Vicat Softening Temperature of Plastics
$52.00 D1600-14 Standard Terminology for Abbreviated Terms Relating to Plastics
$55.20 D1600-13 Standard Terminology for Abbreviated Terms Relating to Plastics
$55.20 D1600-08 Standard Terminology for Abbreviated Terms Relating to Plastics
$55.20 D1600-07 Standard Terminology for Abbreviated Terms Relating to Plastics
$55.20 D1600-99 Standard Terminology for Abbreviated Terms Relating to Plastics
$46.00 D1708-13 Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens
$55.20 D1708-10 Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens
$55.20 D1708-06a Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens
$55.20 D1708-06 Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens
$55.20 D1708-02a Standard Test Method for Tensile Properties of Plastics By Use of Microtensile Specimens
$49.20 D1708-96 Standard Test Method for Tensile Properties of Plastics By Use of Microtensile Specimens
$41.00 D1712-09(2014) Standard Practice for Resistance of Plastics to Sulfide Staining
$49.20 D1712-09 Standard Practice for Resistance of Plastics to Sulfide Staining
$49.20 D1712-03 Standard Practice for Resistance of Plastics to Sulfide Staining
$49.20 D1712-96 Standard Practice for Resistance of Plastics to Sulfide Staining
$41.00 D1823-16 Standard Test Method for Apparent Viscosity of Plastisols and Organosols at High Shear Rates by Extrusion Viscometer
$49.20 D1823-95(2009) Standard Test Method for Apparent Viscosity of Plastisols and Organosols at High Shear Rates by Extrusion Viscometer
$49.20 D1823-95(2001) Standard Test Method for Apparent Viscosity of Plastisols and Organosols at High Shear Rates by Extrusion Viscometer
$49.20 D1823-95 Standard Test Method for Apparent Viscosity of Plastisols and Organosols at High Shear Rates by Extrusion Viscometer
$41.00 D1824-16 Standard Test Method for Apparent Viscosity of Plastisols and Organosols at Low Shear Rates
$49.20 D1824-95(2010) Standard Test Method for Apparent Viscosity of Plastisols and Organosols at Low Shear Rates
$49.20 D1824-95(2002) Standard Test Method for Apparent Viscosity of Plastisols and Organosols at Low Shear Rates
$55.20 D1895-96(2010)e1 Standard Test Methods for Apparent Density, Bulk Factor, and Pourability of Plastic Materials
$55.20 D1895-96(2010) Standard Test Methods for Apparent Density, Bulk Factor, and Pourability of Plastic Materials
$55.20 D1895-96(2003) Standard Test Methods for Apparent Density, Bulk Factor, and Pourability of Plastic Materials
$55.20 D1895-96 Standard Test Methods for Apparent Density, Bulk Factor, and Pourability of Plastic Materials
$46.00 D1929-16 Standard Test Method for Determining Ignition Temperature of Plastics
$55.20 D1929-14 Standard Test Method for Determining Ignition Temperature of Plastics
$55.20 D1929-13a Standard Test Method for Determining Ignition Temperature of Plastics
$55.20 D1929-13 Standard Test Method for Determining Ignition Temperature of Plastics
$55.20 D1929-12 Standard Test Method for Determining Ignition Temperature of Plastics
$55.20 D1929-11 Standard Test Method for Determining Ignition Temperature of Plastics
$55.20 D1929-96(2001)e1 Standard Test Method for Determining Ignition Temperature of Plastics (Withdrawn 2010)
$55.20 D1929-96 Standard Test Method for Determining Ignition Temperature of Plastics
$55.20 D2117-82(1988)e1 Standard Test Method for Melting Point of Semicrystalline Polymers by the Hot Stage Microscopy Method (Withdrawn 1994)
$41.00 D2583-13a Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
$49.20 D2583-13 Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
$49.20 D2583-07 Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
$49.20 D2583-06 Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
$49.20 D2583-95(2001)e1 Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
$49.20 D2583-95 Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
$46.00 D2843-16 Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics
$55.20 D2843-10 Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics
$55.20 D2843-99(2004)e1 Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics
$55.20 D2843-99(2004) Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics
$55.20 D2843-99 Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics
$46.00 D2857-16 Standard Practice for Dilute Solution Viscosity of Polymers
$55.20 D2857-95(2007) Standard Practice for Dilute Solution Viscosity of Polymers (Withdrawn 2016)
$55.20 D2857-95(2001) Standard Practice for Dilute Solution Viscosity of Polymers
$62.40 D2863-13 Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)
$62.40 D2863-12e1 Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)
$62.40 D2863-12 Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)
$62.40 D2863-10 Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)
$62.40 D2863-09 Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)
$62.40 D2863-08 Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)
$62.40 D2863-06a Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)
$62.40 D2863-00 Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)
$55.20 D2863-95 Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-like Combustion of Plastics (Oxygen Index)
$62.40 D2990-09 Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics
$62.40 D2990-01 Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics
$62.40 D2990-95 Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics
$46.00 D3045-92(2010) Standard Practice for Heat Aging of Plastics Without Load
$55.20 D3045-92(2003) Standard Practice for Heat Aging of Plastics Without Load
$46.00 D3418-15 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
$55.20 D3418-12e1 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
$55.20 D3418-12 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
$55.20 D3418-08 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
$55.20 D3418-03 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
$55.20 D3418-99 Standard Test Method for Transition Temperatures of Polymers By Differential Scanning Calorimetry
$55.20 D3418-82(1988)e1 Standard Test Method for Transition Temperatures of Polymers By Thermal Analysis
$46.00 D3763-15 Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors
$55.20 D3763-14 Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors
$55.20 D3763-10e1 Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors
$55.20 D3763-10 Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors
$55.20 D3763-08 Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors
$55.20 D3763-06 Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors
$55.20 D3763-02 Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors
$55.20 D3763-00 Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors
$46.00 D3795-00a(2012) Standard Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting Materials by Torque Rheometer
$55.20 D3795-00a(2006) Standard Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting Materials by Torque Rheometer
$55.20 D3795-00a Standard Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting Materials by Torque Rheometer
$46.00 D3801-10 Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position
$55.20 D3801-06 Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position
$55.20 D3801-00 Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position
$55.20 D3801-96e1 Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position
$55.20 D3814-06 Standard Guide for Locating Combustion Test Methods for Polymeric Materials (Withdrawn 2012)
$55.20 D3814-99 Standard Guide for Locating Combustion Test Methods for Polymeric Materials
$46.00 D3929-03(2015) Standard Test Method for Evaluating Stress Cracking of Plastics by Adhesives Using the Bent-Beam Method
$49.20 D3929-03(2010)e1 Standard Test Method for Evaluating Stress Cracking of Plastics by Adhesives Using the Bent-Beam Method
$49.20 D3929-03 Standard Test Method for Evaluating Stress Cracking of Plastics by Adhesives Using the Bent-Beam Method
$49.20 D3929-96e1 Standard Test Method for Evaluating Stress Cracking of Plastics by Adhesives Using the Bent-Beam Method
$67.00 D4000-16 Standard Classification System for Specifying Plastic Materials
$80.40 D4000-13 Standard Classification System for Specifying Plastic Materials
$80.40 D4000-12 Standard Classification System for Specifying Plastic Materials
$80.40 D4000-11 Standard Classification System for Specifying Plastic Materials
$80.40 D4000-10a Standard Classification System for Specifying Plastic Materials
$80.40 D4000-09b Standard Classification System for Specifying Plastic Materials
$80.40 D4000-09a Standard Classification System for Specifying Plastic Materials
$62.40 D4000-08 Standard Classification System for Specifying Plastic Materials
$62.40 D4000-07 Standard Classification System for Specifying Plastic Materials
$62.40 D4000-04e1 Standard Classification System for Specifying Plastic Materials
$62.40 D4000-04 Standard Classification System for Specifying Plastic Materials
$62.40 D4000-03a Standard Classification System for Specifying Plastic Materials
$62.40 D4000-03 Standard Classification System for Specifying Plastic Materials
$62.40 D4000-01ae1 Standard Classification System for Specifying Plastic Materials
$62.40 D4000-01 Standard Classification System for Specifying Plastic Materials
$62.40 D4000-00a Standard Classification System for Specifying Plastic Materials
$62.40 D4000-00 Standard Classification System for Specifying Plastic Materials
$52.00 D4001-13 Standard Test Method for Determination of Weight-Average Molecular Weight of Polymers By Light Scattering
$62.40 D4001-93(2006) Standard Test Method for Determination of Weight-Average Molecular Weight of Polymers By Light Scattering
$62.40 D4001-93(1999) Standard Test Method for Determination of Weight-Average Molecular Weight of Polymers By Light Scattering
$46.00 D4065-12 Standard Practice for Plastics: Dynamic Mechanical Properties: Determination and Report of Procedures
$55.20 D4065-06 Standard Practice for Plastics: Dynamic Mechanical Properties: Determination and Report of Procedures
$55.20 D4065-01 Standard Practice for Plastics: Dynamic Mechanical Properties: Determination and Report of Procedures
$55.20 D4065-95 Standard Practice for Plastics: Dynamic Mechanical Properties: Determination and Report of Procedures
$41.00 D4092-07(2013) Standard Terminology for Plastics: Dynamic Mechanical Properties
$49.20 D4092-07 Standard Terminology: Plastics: Dynamic Mechanical Properties
$49.20 D4092-01 Standard Terminology: Plastics: Dynamic Mechanical Properties
$49.20 D4092-96 Standard Terminology: Plastics: Dynamic Mechanical Properties
$52.00 D4093-95(2014) Standard Test Method for Photoelastic Measurements of Birefringence and Residual Strains in Transparent or Translucent Plastic Materials
$62.40 D4093-95(2010) Standard Test Method for Photoelastic Measurements of Birefringence and Residual Strains in Transparent or Translucent Plastic Materials
$62.40 D4093-95(2005)e1 Standard Test Method for Photoelastic Measurements of Birefringence and Residual Strains in Transparent or Translucent Plastic Materials
$55.20 D4093-95(2001)e1 Standard Test Method for Photoelastic Measurements of Birefringence and Residual Strains in Transparent or Translucent Plastic Materials
$55.20 D4093-95 Standard Test Method for Photoelastic Measurements of Birefringence and Residual Strains in Transparent or Translucent Plastic Materials
$46.00 D4364-13 Standard Practice for Performing Outdoor Accelerated Weathering Tests of Plastics Using Concentrated Sunlight
$49.20 D4364-05 Standard Practice for Performing Outdoor Accelerated Weathering Tests of Plastics Using Concentrated Sunlight
$49.20 D4364-02 Standard Practice for Performing Outdoor Accelerated Weathering Tests of Plastics Using Concentrated Sunlight
$49.20 D4364-94 Standard Practice for Performing Outdoor Accelerated Weathering Tests of Plastics Using Concentrated Sunlight
$41.00 D4459-12 Standard Practice for Xenon-Arc Exposure of Plastics Intended for Indoor Applications
$49.20 D4459-06 Standard Practice for Xenon-Arc Exposure of Plastics Intended for Indoor Applications
$49.20 D4459-99 Standard Practice for Xenon-Arc Exposure of Plastics Intended for Indoor Applications
$55.20 D4508-10 Standard Test Method for Chip Impact Strength of Plastics (Withdrawn 2016)
$55.20 D4508-06 Standard Test Method for Chip Impact Strength of Plastics
$55.20 D4508-05 Standard Test Method for Chip Impact Strength of Plastics
$55.20 D4508-04a Standard Test Method for Chip Impact Strength of Plastics
$55.20 D4508-04 Standard Test Method for Chip Impact Strength of Plastics
$55.20 D4508-98 Standard Test Method for Chip Impact Strength of Plastics
$41.00 D4526-12 Standard Practice for Determination of Volatiles in Polymers by Static Headspace Gas Chromatography
$49.20 D4526-96(2007) Standard Practice for Determination of Volatiles in Polymers by Static Headspace Gas Chromatography
$49.20 D4526-96 Standard Practice for Determination of Volatiles in Polymers by Static Headspace Gas Chromatography
$49.20 D4526-96(2001)e1 Standard Practice for Determination of Volatiles in Polymers by Static Headspace Gas Chromatography
$46.00 D4674-02a(2010) Standard Practice for Accelerated Testing for Color Stability of Plastics Exposed to Indoor Office Environments
$55.20 D4674-02a Standard Practice for Accelerated Testing for Color Stability of Plastics Exposed to Indoor Office Environments
$55.20 D4674-02 Standard Test Method for Accelerated Testing for Color Stability of Plastics Exposed to Indoor Fluorescent Lighting and Window-Filtered Daylight
$46.00 D4754-11 Standard Test Method for Two-Sided Liquid Extraction of Plastic Materials Using FDA Migration Cell
$55.20 D4754-98(2003) Standard Test Method for Two-Sided Liquid Extraction of Plastic Materials Using FDA Migration Cell
$49.20 D4754-98 Standard Test Method for Two-Sided Liquid Extraction of Plastic Materials Using FDA Migration Cell
$41.00 D5023-15 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
$49.20 D5023-07 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
$49.20 D5023-01 Standard Test Method for Measuring the Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
$49.20 D5023-99 Standard Test Method for Measuring the Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
$41.00 D5024-15 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Compression
$49.20 D5024-07 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Compression
$49.20 D5024-01 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Compression
$49.20 D5024-95a Standard Test Method for Plastics: Dynamic Mechanical Properties: In Compression
$41.00 D5026-15 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Tension
$49.20 D5026-06(2014)e1 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Tension
$49.20 D5026-06 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Tension
$49.20 D5026-01 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Tension
$49.20 D5026-95a Standard Test Method for Plastics: Dynamic Mechanical Properties: In Tension
$46.00 D5045-14 Standard Test Methods for Plane-Strain Fracture Toughness and Strain Energy Release Rate of Plastic Materials
$55.20 D5045-99(2007)e1 Standard Test Methods for Plane-Strain Fracture Toughness and Strain Energy Release Rate of Plastic Materials
$55.20 D5045-99 Standard Test Methods for Plane-Strain Fracture Toughness and Strain Energy Release Rate of Plastic Materials
$46.00 D5048-14 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using a 125-mm Flame
$55.20 D5048-09 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using 125-mm Flame
$55.20 D5048-03 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using 125-mm Flame
$55.20 D5048-97 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using 125-mm Flame
$46.00 D5208-14 Standard Practice for Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics
$55.20 D5208-09 Standard Practice for Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics
$55.20 D5208-01 Standard Practice for Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics
$49.20 D5208-91 Standard Practice for Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics (Withdrawn 2000)
$46.00 D5226-16 Standard Practice for Dissolving Polymer Materials
$55.20 D5226-98(2010)e1 Standard Practice for Dissolving Polymer Materials
$55.20 D5226-98(2003) Standard Practice for Dissolving Polymer Materials
$55.20 D5226-98 Standard Practice for Dissolving Polymer Materials
$41.00 D5272-08(2013) Standard Practice for Outdoor Exposure Testing of Photodegradable Plastics
$49.20 D5272-08 Standard Practice for Outdoor Exposure Testing of Photodegradable Plastics
$49.20 D5272-92(1999) Standard Practice for Outdoor Exposure Testing of Photodegradable Plastics
$41.00 D5279-13 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Torsion
$49.20 D5279-08 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Torsion
$49.20 D5279-01 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Torsion
$49.20 D5279-99 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Torsion
$41.00 D542-14 Standard Test Method for Index of Refraction of Transparent Organic Plastics
$49.20 D542-13 Standard Test Method for Index of Refraction of Transparent Organic Plastics
$49.20 D542-00(2006) Standard Test Method for Index of Refraction of Transparent Organic Plastics
$49.20 D542-00 Standard Test Method for Index of Refraction of Transparent Organic Plastics
$46.00 D543-14 Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents
$55.20 D543-06 Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents
$55.20 D543-95(2001) Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents
$55.20 D543-95 Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents
$46.00 D5577-94(2010)e1 Standard Guide for Techniques to Separate and Identify Contaminants in Recycled Plastics
$55.20 D5577-94(2003) Standard Guide for Techniques to Separate and Identify Contaminants in Recycled Plastics
$55.20 D5577-94 Standard Guide for Techniques to Separate and Identify Contaminants in Recycled Plastics
$46.00 D5592-94(2010) Standard Guide for Material Properties Needed in Engineering Design Using Plastics
$55.20 D5592-94(2002)e1 Standard Guide for Material Properties Needed in Engineering Design Using Plastics
$55.20 D5592-94 Standard Guide for Material Properties Needed in Engineering Design Using Plastics
$41.00 D5675-13 Standard Classification for Low Molecular Weight PTFE and FEP Micronized Powders
$49.20 D5675-04(2010) Standard Specification for Fluoropolymer Micropowders
$49.20 D5675-04 Standard Specification for Fluoropolymer Micropowders
$49.20 D5675-99a Standard Specification for Fluoropolymer Micropowders
$41.00 D570-98(2010)e1 Standard Test Method for Water Absorption of Plastics
$49.20 D570-98(2005) Standard Test Method for Water Absorption of Plastics
$49.20 D570-98 Standard Test Method for Water Absorption of Plastics
$49.20 D570-95 Standard Test Method for Water Absorption of Plastics
$46.00 D5947-11 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens
$55.20 D5947-06 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens
$62.40 D5947-03 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens
$55.20 D5947-02 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens
$55.20 D5947-96 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens
$49.20 D5990-00 Standard Classification System for Polyketone Injection Molding and Extrusion Materials (PK) (Withdrawn 2007)
$55.20 D6002-96(2002)e1 Standard Guide for Assessing the Compostability of Environmentally Degradable Plastics (Withdrawn 2011)
$55.20 D6002-96 Standard Guide for Assessing the Compostability of Environmentally Degradable Plastics
$46.00 D6226-15 Standard Test Method for Open Cell Content of Rigid Cellular Plastics
$55.20 D6226-10 Standard Test Method for Open Cell Content of Rigid Cellular Plastics
$55.20 D6226-05 Standard Test Method for Open Cell Content of Rigid Cellular Plastics
$55.20 D6226-98e1 Standard Test Method for Open Cell Content of Rigid Cellular Plastics
$55.20 D6272-10 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
$55.20 D6272-02(2008)e1 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
$55.20 D6272-02 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
$55.20 D6272-00 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
$41.00 D6288-15 Standard Practice for Separation and Washing of Recycled Plastics Prior to Testing
$49.20 D6288-09 Standard Practice for Separation and Washing of Recycled Plastics Prior to Testing
$49.20 D6288-98(2003) Standard Practice for Separation and Washing of Recycled Plastics Prior to Testing
$49.20 D6288-98 Standard Practice for Separation and Washing of Recycled Plastics Prior to Testing
$46.00 D6290-13 Standard Test Method for Color Determination of Plastic Pellets
$55.20 D6290-05e1 Standard Test Method for Color Determination of Plastic Pellets
$55.20 D6290-05 Standard Test Method for Color Determination of Plastic Pellets
$55.20 D6290-98e1 Standard Test Method for Color Determination of Plastic Pellets
$46.00 D635-14 Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position
$55.20 D635-10 Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position
$55.20 D635-06 Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position
$55.20 D635-03 Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position
$55.20 D635-98 Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position
$55.20 D635-97 Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position
$46.00 D6360-15 Standard Practice for Enclosed Carbon-Arc Exposures of Plastics
$49.20 D6360-07 Standard Practice for Enclosed Carbon-Arc Exposures of Plastics
$49.20 D6360-99 Standard Practice for Enclosed Carbon-Arc Exposures of Plastics
$52.00 D638-14 Standard Test Method for Tensile Properties of Plastics
$62.40 D638-10 Standard Test Method for Tensile Properties of Plastics
$62.40 D638-08 Standard Test Method for Tensile Properties of Plastics
$62.40 D638-03 Standard Test Method for Tensile Properties of Plastics
$62.40 D638-02a Standard Test Method for Tensile Properties of Plastics
$62.40 D638-02 Standard Test Method for Tensile Properties of Plastics
$62.40 D638-01 Standard Test Method for Tensile Properties of Plastics
$62.40 D638-00 Standard Test Method for Tensile Properties of Plastics
$62.40 D638-99 Standard Test Method for Tensile Properties of Plastics
$55.20 D6395-10 Standard Test Method for Flatwise Flexural Impact Resistance of Rigid Plastics
$55.20 D6395-05 Standard Test Method for Flatwise Flexural Impact Resistance of Rigid Plastics
$55.20 D6395-99 Standard Test Method for Flatwise Flexural Impact Resistance of Rigid Plastics
$41.00 D6400-12 Standard Specification for Labeling of Plastics Designed to be Aerobically Composted in Municipal or Industrial Facilities
$49.20 D6400-04 Standard Specification for Compostable Plastics
$52.00 D648-16 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
$62.40 D648-07 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position (Withdrawn 2016)
$62.40 D648-06 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
$62.40 D648-04 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
$62.40 D648-01 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
$62.40 D648-00a Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
$49.20 D6692-01 Standard Test Method for Determining the Biodegradability of Radiolabeled Polymeric Plastic Materials in Seawater (Withdrawn 2010)
$46.00 D6701-16 Standard Test Method for Determining Water Vapor Transmission Rates Through Nonwoven and Plastic Barriers
$55.20 D6701-01 Standard Test Method for Determining Water Vapor Transmission Rates Through Nonwoven and Plastic Barriers (Withdrawn 2008)
$55.20 D6776-02 Standard Test Method for Determining Anaerobic Biodegradability of Radiolabeled Plastic Materials in a Laboratory-Scale Simulated Landfill Environment (Withdrawn 2011)
$41.00 D6869-03(2011) Standard Test Method for Coulometric and Volumetric Determination of Moisture in Plastics Using the Karl Fischer Reaction (the Reaction of Iodine with Water)
$49.20 D6869-03 Standard Test Method for Coulometric and Volumetric Determination of Moisture in Plastics Using the Karl Fischer Reaction (the Reaction of Iodine with Water)
$46.00 D695-15 Standard Test Method for Compressive Properties of Rigid Plastics
$55.20 D695-10 Standard Test Method for Compressive Properties of Rigid Plastics
$55.20 D695-08 Standard Test Method for Compressive Properties of Rigid Plastics
$55.20 D695-02a Standard Test Method for Compressive Properties of Rigid Plastics
$55.20 D695-02 Standard Test Method for Compressive Properties of Rigid Plastics
$55.20 D695-96 Standard Test Method for Compressive Properties of Rigid Plastics
$46.00 D696-16 Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between −30°C and 30°C with a Vitreous Silica Dilatometer
$55.20 D696-08e1 Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between −30°C and 30°C with a Vitreous Silica Dilatometer
$55.20 D696-08 Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between -30°C and 30°C With a Vitreous Silica Dilatometer
$55.20 D696-03 Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between -30°C and 30°C With a Vitreous Silica Dilatometer
$55.20 D696-98 Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between -30°C and 30°C With a Vitreous Silica Dilatometer
$55.20 D6980-12 Standard Test Method for Determination of Moisture in Plastics by Loss in Weight
$55.20 D6980-09 Test Method for Determination of Moisture in Plastics by Loss in Weight
$55.20 D6980-04 Test Method for Determination of Moisture in Plastics by Loss in Weight
$46.00 D7132-14 Standard Test Method for Determination of Retained Blowing Agent in Extruded Polystyrene Foam
$55.20 D7132-13 Standard Test Method for Determination of Retained Blowing Agent in Extruded Polystyrene Foam
$49.20 D7132-05 Standard Test Method for Determination of Retained Blowing Agent in Extruded Polystyrene Foam
$46.00 D7134-05(2012) Standard Test Method for Molecular Mass Averages and Molecular Mass Distribution of Atactic Polystyrene by Matrix Assisted Laser Desorption/Ionization (MALDI)-Time of Flight (TOF) Mass Spectrometry (MS)
$55.20 D7134-05 Standard Test Method for Molecular Mass Averages and Molecular Mass Distribution of Atactic Polystyrene by Matrix Assisted Laser Desorption/Ionization (MALDI)-Time of Flight (TOF) Mass Spectrometry (MS)
$41.00 D7191-10 Standard Test Method for Determination of Moisture in Plastics by Relative Humidity Sensor
$49.20 D7191-05 Standard Test Method for Determination of Moisture in Plastics by Relative Humidity Sensor
$41.00 D7210-13 Standard Practice for Extraction of Additives in Polyolefin Plastics
$49.20 D7210-06 Standard Practice for Extraction of Additives in Polyolefin Plastics
$46.00 D7251-11 Standard Specification for Color and Appearance Retention of Variegated Color Plastic Siding Products
$55.20 D7251-09 Standard Specification for Color and Appearance Retention of Variegated Color Plastic Siding Products
$55.20 D7251-06e1 Standard Specification for Color and Appearance Retention of Variegated Color Plastic Siding Products
$55.20 D7251-06 Standard Specification for Color and Appearance Retention of Variegated Color Plastic Siding Products
$52.00 D7309-13 Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry
$55.20 D7309-11 Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry
$55.20 D7309-07a Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry
$55.20 D7309-07 Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry
$49.20 D732-10 Standard Test Method for Shear Strength of Plastics by Punch Tool
$49.20 D732-09 Standard Test Method for Shear Strength of Plastics by Punch Tool
$49.20 D732-02 Standard Test Method for Shear Strength of Plastics by Punch Tool
$49.20 D732-99 Standard Test Method for Shear Strength of Plastics by Punch Tool
$46.00 D746-14 Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact
$55.20 D746-13 Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact
$55.20 D746-07 Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact
$55.20 D746-04 Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact
$55.20 D746-98e1 Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact
$46.00 D747-10 Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam
$55.20 D747-08 Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam
$55.20 D747-02 Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam
$55.20 D747-99 Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam
$49.20 D7474-08 Standard Practice for Determining Residual Stresses in Extruded or Molded Sulfone Plastic (SP) Parts by Immersion in Various Chemical Reagents
$49.20 D756-93 Practice for Determination of Weight and Shape Changes of Plastics Under Accelerated Service Conditions (Withdrawn 1998)
$41.00 D7711-11(2015) Standard Guide for Description of Polymer Pellet Defects
$49.20 D7711-11e1 Standard Guide for Description of Polymer Pellet Defects
$49.20 D7711-11 Standard Guide for Description of Polymer Pellets Including Defects
$55.20 D7774-12 Standard Test Method for Flexural Fatigue Properties of Plastics
$49.20 D7791-12 Standard Test Method for Uniaxial Fatigue Properties of Plastics
$46.00 D7856-15a Standard Specification for Color and Appearance Retention of Solid and Variegated Color Plastic Siding Products using CIELab Color Space
$55.20 D7856-15 Standard Specification for Color and Appearance Retention of Solid and Variegated Color Plastic Siding Products using CIELab Color Space
$55.20 D7856-14 Standard Specification for Color and Appearance Retention of Solid and Variegated Color Plastic Siding Products using CIELab Color Space
$46.00 D792-13 Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement
$55.20 D792-08 Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement
$55.20 D792-00 Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement
$55.20 D792-98 Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement
$62.40 D883-12e1 Standard Terminology Relating to Plastics
$62.40 D883-12 Standard Terminology Relating to Plastics
$62.40 D883-11 Standard Terminology Relating to Plastics
$62.40 D883-08 Standard Terminology Relating to Plastics
$62.40 D883-07 Standard Terminology Relating to Plastics
$62.40 D883-00 Standard Terminology Relating to Plastics
$46.00 D953-10 Standard Test Method for Bearing Strength of Plastics
$55.20 D953-09 Standard Test Method for Bearing Strength of Plastics
$55.20 D953-02 Standard Test Method for Bearing Strength of Plastics
$55.20 D953-95 Standard Test Method for Bearing Strength of Plastics
$41.00 E1428-15a Standard Test Method for Evaluating the Performance of Antimicrobials in or on Polymeric Solids Against Staining by Streptomyce species (A Pink Stain Organism)
$49.20 E1428-15 Standard Test Method for Evaluating the Performance of Antimicrobials in or on Polymeric Solids Against Staining by Streptomyce species (A Pink Stain Organism)
$49.20 E1428-99(2009) Standard Test Method for Evaluating the Performance of Antimicrobials in or on Polymeric Solids Against Staining by Streptoverticillium reticulum (A Pink Stain Organism)
$49.20 E1428-99(2004) Standard Test Method for Evaluating the Performance of Antimicrobials in or on Polymeric Solids Against Staining by Streptoverticillium reticulum (A Pink Stain Organism)
$49.20 E1428-99 Standard Test Method for Evaluating the Performance of Antimicrobials in or on Polymeric Solids Against Staining by Streptoverticillium Reticulum (A Pink Stain Organism)
$49.20 E2050-12a Standard Test Method for Determination of Total Carbon in Mold Powders by Combustion
$49.20 E2050-12 Standard Test Method for Determination of Total Carbon in Mold Powders by Combustion-Infrared Absorption Spectrometry
$49.20 E2050-99(2004) Standard Test Method for Determination of Total Carbon in Mold Powders by Combustion-Infrared Absorption Method
$49.20 E2050-99 Standard Test Method for Determination of Total Carbon in Mold Powders by Combustion-Infrared Absorption Method
$46.00 E2092-13 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
$55.20 E2092-09 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
$55.20 E2092-04 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
$55.20 E2092-03 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
$55.20 E2092-00 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
$46.00 E2113-13 Standard Test Method for Length Change Calibration of Thermomechanical Analyzers
$55.20 E2113-09 Standard Test Method for Length Change Calibration of Thermomechanical Analyzers
$55.20 E2113-04 Standard Test Method for Length Change Calibration of Thermomechanical Analyzers
$55.20 E2113-00 Standard Test Method for Length Change Calibration of Thermomechanical Analyzers
$46.00 E2347-16 Standard Test Method for Indentation Softening Temperature by Thermomechanical Analysis
$55.20 E2347-11 Standard Test Method for Indentation Softening Temperature by Thermomechanical Analysis
$55.20 E2347-05 Standard Test Method for Indentation Softening Temperature by Thermomechanical Analysis
$55.20 E2347-04 Standard Test Method for Indentation Softening Temperature by Thermomechanical Analysis
$46.00 E2479-16 Standard Practice for Measuring the Ultrasonic Velocity in Polyethylene Tank Walls Using Lateral Longitudinal (LCR) Waves
$55.20 E2479-11 Standard Practice for Measuring the Ultrasonic Velocity in Polyethylene Tank Walls Using Lateral Longitudinal (LCR) Waves
$41.00 F1164-97(2014) Standard Test Method for Evaluation of Transparent Plastics Exposed to Accelerated Weathering Combined with Biaxial Stress
$49.20 F1164-97(2009)e1 Standard Test Method for Evaluation of Transparent Plastics Exposed to Accelerated Weathering Combined with Biaxial Stress
$49.20 F1164-97 Standard Test Method for Evaluation of Transparent Plastics Exposed to Accelerated Weathering Combined with Biaxial Stress
$46.00 F1673-10(2016) Standard Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems
$55.20 F1673-10 Standard Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems
$55.20 F1673-04(2009) Standard Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems
$55.20 F1673-04 Standard Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems
$55.20 F1673-02 Standard Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems
$55.20 F1673-95 Standard Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems
$41.00 F2003-02(2015) Standard Practice for Accelerated Aging of Ultra-High Molecular Weight Polyethylene after Gamma Irradiation in Air
$49.20 F2003-02(2008) Standard Practice for Accelerated Aging of Ultra-High Molecular Weight Polyethylene after Gamma Irradiation in Air
$49.20 F2003-02 Standard Practice for Accelerated Aging of Ultra-High Molecular Weight Polyethylene after Gamma Irradiation in Air
$49.20 F2003-00 Standard Guide for Accelerated Aging of Ultra-High Molecular Weight Polyethylene
$46.00 F2018-00(2010) Standard Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens
$55.20 F2018-00(2006) Standard Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens
$55.20 F2018-00e1 Standard Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens
$55.20 F2018-00 Standard Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens
$46.00 F2214-16 Standard Test Method for In Situ Determination of Network Parameters of Crosslinked Ultra High Molecular Weight Polyethylene (UHMWPE)
$55.20 F2214-02(2008) Standard Test Method for In Situ Determination of Network Parameters of Crosslinked Ultra High Molecular Weight Polyethylene (UHMWPE)
$55.20 F2214-02 Standard Test Method forIn Situ Determination of Network Parameters of Crosslinked Ultra High Molecular Weight Polyethylene (UHMWPE)
$52.00 F2617-15 Standard Test Method for Identification and Quantification of Chromium, Bromine, Cadmium, Mercury, and Lead in Polymeric Material Using Energy Dispersive X-ray Spectrometry
$55.20 F2617-08e1 Standard Test Method for Identification and Quantification of Chromium, Bromine, Cadmium, Mercury, and Lead in Polymeric Material Using Energy Dispersive X-ray Spectrometry
$55.20 F2617-08 Standard Test Method for Identification and Quantification of Chromium, Bromine, Cadmium, Mercury, and Lead in Polymeric Material Using Energy Dispersive X-ray Spectrometry
$41.00 F619-14 Standard Practice for Extraction of Medical Plastics
$49.20 F619-03(2008) Standard Practice for Extraction of Medical Plastics
$49.20 F619-03 Standard Practice for Extraction of Medical Plastics
$49.20 F619-02 Standard Practice for Extraction of Medical Plastics
$49.20 F619-79(1997)e1 Standard Practice for Extraction of Medical Plastics
$41.00 F640-12 Standard Test Methods for Determining Radiopacity for Medical Use
$49.20 F640-07 Standard Test Methods for Determining Radiopacity for Medical Use
$49.20 F640-79(2000) Standard Test Methods for Radiopacity of Plastics for Medical Use
$46.00 F791-96(2013) Standard Test Method for Stress Crazing of Transparent Plastics
$55.20 F791-96(2008) Standard Test Method for Stress Crazing of Transparent Plastics
$55.20 F791-96(2002)e1 Standard Test Method for Stress Crazing of Transparent Plastics
$55.20 F791-96(2002) Standard Test Method for Stress Crazing of Transparent Plastics
$55.20 F791-96 Standard Test Method for Stress Crazing of Transparent Plastics
$55.20 G176-03(2009) Standard Test Method for Ranking Resistance of Plastics to Sliding Wear using Block-on-Ring Wear Test—Cumulative Wear Method
$55.20 G176-03 Standard Test Method for Ranking Resistance of Plastics to Sliding Wear using Block-on-Ring Wear Test—Cumulative Wear Method
$46.00 G21-15 Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi
$55.20 G21-13 Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi
$55.20 G21-09 Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi
$49.20 G21-96 Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi
$55.20 G21-96(2002) Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi
$49.20 G21-90 Standard Practice for Determining Resistance of Synthetic Polymetric Materials to Fungi
$41.00 D1042-12(2017) Standard Test Method for Linear Dimensional Changes of Plastics Caused by Exposure to Heat and Moisture
$62.40 D1525-17 Standard Test Method for Vicat Softening Temperature of Plastics
$52.00 D2863-17 Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)
$67.00 D2990-17 Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics
$46.00 D6272-17 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
$46.00 D6980-17 Standard Test Method for Determination of Moisture in Plastics by Loss in Weight
$41.00 D732-17 Standard Test Method for Shear Strength of Plastics by Punch Tool
$41.00 D7474-17 Standard Practice for Determining Residual Stresses in Extruded or Molded Sulfone Plastic (SP) Parts by Immersion in Various Chemical Reagents
$49.20 D7474-12 Standard Practice for Determining Residual Stresses in Extruded or Molded Sulfone Plastic (SP) Parts by Immersion in Various Chemical Reagents
$52.00 D883-17 Standard Terminology Relating to Plastics
$41.00 E2050-17 Standard Test Method for Determination of Total Carbon in Mold Powders by Combustion
$46.00 D7774-17 Standard Test Method for Flexural Fatigue Properties of Plastics
$46.00 D7791-17 Standard Test Method for Uniaxial Fatigue Properties of Plastics
$46.00 D8117-17 Standard Test Method for Oxidative Induction Time of Polyolefin Geosynthetics by Differential Scanning Calorimetry
$52.00 D1525-17e1 Standard Test Method for Vicat Softening Temperature of Plastics
$46.00 D1895-17 Standard Test Methods for Apparent Density, Bulk Factor, and Pourability of Plastic Materials
$46.00 G176-03(2017) Standard Test Method for Ranking Resistance of Plastics to Sliding Wear Using Block-on-Ring Wear Test—Cumulative Wear Method
$55.20 D1929-10 Standard Test Method for Determining Ignition Temperature of Plastics
$46.00 D6395-11 Standard Test Method for Flatwise Flexural Impact Resistance of Rigid Plastics