D4313-03 - $49.20   BUY NOW

Standard Specification for General-Purpose, Heavy-Duty, and Extra-Heavy-Duty Crosslinked Chlorinated Polyethylene (CM) Jackets For Wire and Cable

ASTM Volume 10.02 Electrical Insulation (II): D2518-latest

D4313-03 Publication Description:

This specification covers crosslinked chlorinated polyethylene compounds intended for use as jacket materials (outer coverings) on electrical wires and cables for general-purpose, heavy-duty, and extra-heavy-duty service. The materials under this specification, however, are not recommended for applications with very low temperature service requirement. Physical tests shall be performed and shall conform to the physical property requirements specified such as tensile strength, tensile stress at elongation, elongation at rupture, and tension set. Per service requirement, additional tests for sunlight and weather resistance shall be performed as well, and shall conform to the tensile strength and elongation requirements specified.

International Classification for Standards (ICS)

ICS Classification Field ICS Field Sub-Group and Number
ICS-29-Electrical ICS Materials-Plastics/Rubber Insulating (29.035.20)

ICS Related Standards

Cart Document Number Document Title
$41.00 A717/A717M-12 Standard Test Method for Surface Insulation Resistivity of Single-Strip Specimens
$49.20 A717/A717M-06 Standard Test Method for Surface Insulation Resistivity of Single-Strip Specimens
$49.20 A717/A717M-01 Standard Test Method for Surface Insulation Resistivity of Single-Strip Specimens
$49.20 A717/A717M-95 Standard Test Method for Surface Insulation Resistivity of Single-Strip Specimens
$46.00 C1710-16 Standard Guide for Installation of Flexible Closed Cell Preformed Insulation in Tube and Sheet Form
$55.20 C1710-15 Standard Guide for Installation of Flexible Closed Cell Preformed Insulation in Tube and Sheet Form
$55.20 C1710-11 Standard Guide for Installation of Flexible Closed Cell Preformed Insulation in Tube and Sheet Form
$55.20 C1710-09 Standard Guide for Installation of Flexible Closed Cell Preformed Insulation in Tube and Sheet Form
$41.00 C1775-14 Standard Specification for Laminate Protective Jacket and Tape for Use over Thermal Insulation for Outdoor Applications
$49.20 C1775-13 Standard Specification for Laminate Protective Jacket and Tape for Use over Thermal Insulation for Outdoor Applications
$62.40 D1000-10 Standard Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications
$62.40 D1000-09 Standard Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications
$62.40 D1000-04e1 Standard Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications
$62.40 D1000-04 Standard Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications
$62.40 D1000-99 Standard Test Method for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications
$41.00 D1047-16 Standard Specification for Poly(Vinyl Chloride) Jacket for Wire and Cable
$49.20 D1047-11 Standard Specification for Poly(Vinyl Chloride) Jacket for Wire and Cable
$49.20 D1047-07 Standard Specification for Poly(Vinyl Chloride) Jacket for Wire and Cable
$49.20 D1047-95 Standard Specification for Poly(Vinyl Chloride) Jacket for Wire and Cable
$49.20 D1047-95(2001) Standard Specification for Poly(Vinyl Chloride) Jacket for Wire and Cable
$46.00 D1048-14 Standard Specification for Rubber Insulating Blankets
$55.20 D1048-12 Standard Specification for Rubber Insulating Blankets
$55.20 D1048-11 Standard Specification for Rubber Insulating Blankets
$55.20 D1048-05 Standard Specification for Rubber Insulating Blankets
$55.20 D1048-99 Standard Specification for Rubber Insulating Blankets
$55.20 D1048-93 Standard Specification for Rubber Insulating Blankets
$55.20 D1048-88ae1 Standard Specification for Rubber Insulating Blankets
$46.00 D1049-98(2010) Standard Specification for Rubber Insulating Covers
$55.20 D1049-98(2002)e1 Standard Specification for Rubber Insulating Covers
$55.20 D1049-98(2002) Standard Specification for Rubber Insulating Covers
$55.20 D1049-98 Standard Specification for Rubber Insulating Covers
$55.20 D1049-93e1 Standard Specification for Rubber Insulating Covers
$55.20 D1049-88 Standard Specification for Rubber Insulating Covers
$46.00 D1051-14a Standard Specification for Rubber Insulating Sleeves
$55.20 D1051-14 Standard Specification for Rubber Insulating Sleeves
$55.20 D1051-08 Standard Specification for Rubber Insulating Sleeves
$55.20 D1051-07 Standard Specification for Rubber Insulating Sleeves
$55.20 D1051-06 Standard Specification for Rubber Insulating Sleeves
$55.20 D1051-02 Standard Specification for Rubber Insulating Sleeves
$55.20 D1051-95(2000) Standard Specification for Rubber Insulating Sleeves
$55.20 D1051-95 Standard Specification for Rubber Insulating Sleeves
$62.40 D1051-87 Standard Specification for Rubber Insulating Sleeves
$41.00 D1351-14 Standard Specification for Thermoplastic Polyethylene Insulation for Electrical Wire and Cable
$49.20 D1351-08 Standard Specification for Thermoplastic Polyethylene Insulation for Electrical Wire and Cable
$49.20 D1351-02 Standard Specification for Thermoplastic Polyethylene Insulation for Electrical Wire and Cable
$49.20 D1351-97 Standard Specification for Thermoplastic Polyethylene Insulation for Electrical Wire and Cable
$49.20 D1389-07 Standard Test Method for Proof-Voltage Testing of Thin Solid Electrical Insulating Materials (Withdrawn 2014)
$49.20 D1389-06 Standard Test Method for Proof-Voltage Testing of Thin Solid Electrical Insulating Materials
$49.20 D1389-97a(2004) Standard Test Method for Proof-Voltage Testing of Thin Solid Electrical Insulating Materials
$49.20 D1389-97a Standard Test Method for Proof-Voltage Testing of Thin Solid Electrical Insulating Materials
$49.20 D1523-00(2006) Standard Specification for Synthetic Rubber Insulation for Wire and Cable, 90°C Operation (Withdrawn 2011)
$49.20 D1523-00 Standard Specification for Synthetic Rubber Insulation for Wire and Cable, 90°C Operation
$46.00 D1675-03(2011) Standard Test Methods for Polytetrafluoroethylene Tubing
$55.20 D1675-03 Standard Test Methods for Polytetrafluoroethylene Tubing
$55.20 D1675-98 Standard Test Methods for Polytetrafluoroethylene Tubing
$49.20 D1679-02 Standard Specification for Synthetic Rubber Heat-and Moisture-Resisting Insulation for Wire and Cable, 75°C Operation (Withdrawn 2006)
$49.20 D1679-97 Standard Specification for Synthetic Rubber Heat- and Moisture-Resisting Insulation for Wire and Cable, 75°C Operation
$46.00 D178-01(2010) Standard Specification for Rubber Insulating Matting
$55.20 D178-01(2005) Standard Specification for Rubber Insulating Matting
$55.20 D178-01e2 Standard Specification for Rubber Insulating Matting
$55.20 D178-01e1 Standard Specification for Rubber Insulating Matting
$55.20 D178-01 Standard Specification for Rubber Insulating Matting
$55.20 D178-93(1998) Standard Specification for Rubber Insulating Matting
$55.20 D178-88 Standard Specification for Rubber Insulating Matting
$52.00 D1822-13 Standard Test Method for Tensile-Impact Energy to Break Plastics and Electrical Insulating Materials
$55.20 D1822-06 Standard Test Method for Tensile-Impact Energy to Break Plastics and Electrical Insulating Materials
$55.20 D1822-99 Standard Test Method for Tensile-Impact Energy to Break Plastics and Electrical Insulating Materials
$46.00 D2148-13 Standard Test Methods for Bondable Silicone Rubber Tapes Used for Electrical Insulation
$55.20 D2148-02(2008)e1 Standard Test Methods for Bondable Silicone Rubber Tapes Used for Electrical Insulation
$55.20 D2148-02e1 Standard Test Methods for Bondable Silicone Rubber Tapes Used for Electrical Insulation
$55.20 D2148-02 Standard Test Methods for Bondable Silicone Rubber Tapes Used for Electrical Insulation
$55.20 D2148-95 Standard Test Methods for Bondable Silicone Rubber Tapes Used for Electrical Insulation
$49.20 D2219-11 Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 60°C Operation
$49.20 D2219-02(2007)e1 Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 60 °C Operation
$49.20 D2219-02 Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 60°C Operation
$49.20 D2219-97 Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 60°C Operation
$49.20 D2220-11 Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 75°C Operation
$49.20 D2220-02(2007)e1 Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 75 °C Operation
$49.20 D2220-02 Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 75°C Operation
$49.20 D2220-97 Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 75°C Operation
$41.00 D2301-10(2017) Standard Specification for Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape
$49.20 D2301-10 Standard Specification for Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape
$49.20 D2301-99(2004) Standard Specification for Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape
$49.20 D2301-99 Standard Specification for Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape
$46.00 D2305-10 Standard Test Methods for Polymeric Films Used for Electrical Insulation
$55.20 D2305-02 Standard Test Methods for Polymeric Films Used for Electrical Insulation
$55.20 D2305-99 Standard Test Methods for Polymeric Films Used for Electrical Insulation
$41.00 D2308-07(2013) Standard Specification for Thermoplastic Polyethylene Jacket for Electrical Wire and Cable
$49.20 D2308-07 Standard Specification for Thermoplastic Polyethylene Jacket for Electrical Wire and Cable
$49.20 D2308-02 Standard Specification for Thermoplastic Polyethylene Jacket for Electrical Wire and Cable
$49.20 D2308-97 Standard Specification for Thermoplastic Polyethylene Jacket for Electrical Wire and Cable
$41.00 D2484-06(2012)e1 Standard Specification for Polyester Film Pressure-Sensitive Electrical Insulating Tape
$49.20 D2484-06 Standard Specification for Polyester Film Pressure-Sensitive Electrical Insulating Tape
$49.20 D2484-00 Standard Specification for Polyester Film Pressure-Sensitive Electrical Insulating Tape
$49.20 D2522-03(2008)e2 Standard Test Method for Chlorine Content of Polybutenes Used for Electrical Insulation (Withdrawn 2017)
$49.20 D2522-03(2008)e1 Standard Test Method for Chlorine Content of Polybutenes Used for Electrical Insulation
$49.20 D2522-03(2008) Standard Test Method for Chlorine Content of Polybutenes Used for Electrical Insulation
$49.20 D2522-03 Standard Test Method for Chlorine Content of Polybutenes Used for Electrical Insulation
$49.20 D2522-95 Standard Test Method for Chlorine Content of Polybutenes Used for Electrical Insulation
$49.20 D2526-02 Standard Specification for Ozone-Resisting Silicone Rubber Insulation for Wire and Cable (Withdrawn 2006)
$49.20 D2526-97 Standard Specification for Ozone-Resisting Silicone Rubber Insulation for Wire and Cable
$52.00 D256-10e1 Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
$62.40 D256-10 Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
$62.40 D256-06ae1 Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
$62.40 D256-06a Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
$62.40 D256-06 Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
$62.40 D256-05a Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
$62.40 D256-05 Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
$62.40 D256-04 Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
$62.40 D256-03 Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
$62.40 D256-02e1 Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
$62.40 D256-02 Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
$52.00 D2633-13a Standard Test Methods for Thermoplastic Insulations and Jackets for Wire and Cable
$62.40 D2633-13 Standard Test Methods for Thermoplastic Insulations and Jackets for Wire and Cable
$62.40 D2633-12 Standard Test Methods for Thermoplastic Insulations and Jackets for Wire and Cable
$62.40 D2633-08 Standard Test Methods for Thermoplastic Insulations and Jackets for Wire and Cable
$62.40 D2633-02 Standard Test Methods for Thermoplastic Insulations and Jackets for Wire and Cable
$62.40 D2633-96 Standard Methods of Testing Thermoplastic Insulations and Jackets for Wire and Cable
$49.20 D2655-12 Standard Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 0 to 2000 V
$49.20 D2655-00(2006) Standard Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 0 to 2000 V
$49.20 D2655-00 Standard Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 0 to 2000 V
$41.00 D2656-13 Standard Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 2001 to 35 000 V
$49.20 D2656-06 Standard Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 2001 to 35 000 V
$49.20 D2656-00 Standard Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 2001 to 35 000 V
$41.00 D2686-06(2012) Standard Specification for Polytetrafluoroethylene-Backed Pressure-Sensitive Electrical Insulating Tape
$49.20 D2686-00 Standard Specification for Polytetrafluoroethylene-Backed Pressure-Sensitive Electrical Insulating Tape
$41.00 D2754-10(2016) Standard Specification for High-Temperature Glass Cloth Pressure-Sensitive Electrical Insulating Tape
$49.20 D2754-10 Standard Specification for High-Temperature Glass Cloth Pressure-Sensitive Electrical Insulating Tape
$49.20 D2754-99(2004) Standard Specification for High-Temperature Glass Cloth Pressure-Sensitive Electrical Insulating Tape
$49.20 D2754-99 Standard Specification for High-Temperature Glass Cloth Pressure-Sensitive Electrical Insulating Tape
$49.20 D2770-01 Standard Specification for Ozone-Resisting Ethylene-Propylene Rubber Integral Insulation and Jacket for Wire and Cable (Withdrawn 2007)
$49.20 D2770-93 Standard Specification for Ozone-Resisting Ethylene-Propylene Rubber Integral Insulation and Jacket for Wire and Cable
$41.00 D2802-14 Standard Specification for Ozone-Resistant Ethylene-Alkene Polymer Insulation for Wire and Cable
$49.20 D2802-03(2010) Standard Specification for Ozone-Resistant Ethylene-Alkene Polymer Insulation for Wire and Cable
$49.20 D2802-03 Standard Specification for Ozone-Resistant Ethylene-Alkene Polymer Insulation for Wire and Cable
$49.20 D2802-98 Standard Specification for Ozone-Resistant Ethylene-Alkene Polymer Insulation for Wire and Cable
$46.00 D2902-00(2013)e1 Standard Specification for Fluoropolymer Resin Heat-Shrinkable Tubing for Electrical Insulation
$55.20 D2902-00(2006) Standard Specification for Fluoropolymer Resin Heat-Shrinkable Tubing for Electrical Insulation
$55.20 D2902-00 Standard Specification for Fluoropolymer Resin Heat-Shrinkable Tubing for Electrical Insulation
$41.00 D2903-11 Standard Specification for Crosslinked Chlorinated Polyolefin Heat-Shrinkable Tubing for Electrical Insulation
$49.20 D2903-03 Standard Specification for Crosslinked Chlorinated Polyolefin Heat-Shrinkable Tubing for Electrical Insulation
$49.20 D2903-93(1998) Standard Specification for Crosslinked Chlorinated Polyolefin Heat-Shrinkable Tubing for Electrical Insulation
$41.00 D3005-17 Standard Specification for Low-Temperature Resistant Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape
$49.20 D3005-10 Standard Specification for Low-Temperature Resistant Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape
$49.20 D3005-99(2004) Standard Specification for Low-Temperature Resistant Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape
$49.20 D3005-99 Standard Specification for Low-Temperature Resistant Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape
$41.00 D3006-10(2017) Standard Specification for Polyethylene Plastic Pressure-Sensitive Electrical Insulating Tape
$49.20 D3006-10 Standard Specification for Polyethylene Plastic Pressure-Sensitive Electrical Insulating Tape
$49.20 D3006-99(2004) Standard Specification for Polyethylene Plastic Pressure-Sensitive Electrical Insulating Tape
$49.20 D3006-99 Standard Specification for Polyethylene Plastic Pressure-Sensitive Electrical Insulating Tape
$41.00 D3144-00(2013)e1 Standard Specification for Crosslinked Poly(Vinylidene Fluoride) Heat-Shrinkable Tubing for Electrical Insulation
$49.20 D3144-00(2006) Standard Specification for Crosslinked Poly(Vinylidene Fluoride) Heat-Shrinkable Tubing for Electrical Insulation
$49.20 D3144-00 Standard Specification for Crosslinked Poly(Vinylidene Fluoride) Heat-Shrinkable Tubing for Electrical Insulation
$41.00 D3149-06(2013) Standard Specification for Crosslinked Polyolefin Heat-Shrinkable Tubing for Electrical Insulation
$49.20 D3149-06 Standard Specification for Crosslinked Polyolefin Heat-Shrinkable Tubing for Electrical Insulation
$49.20 D3149-00 Standard Specification for Crosslinked Polyolefin Heat-Shrinkable Tubing for Electrical Insulation
$41.00 D3150-11 Standard Specification for Crosslinked and Noncrosslinked Poly(Vinyl Chloride) Heat-Shrinkable Tubing for Electrical Insulation
$49.20 D3150-00(2006) Standard Specification for Crosslinked and Noncrosslinked Poly(Vinyl Chloride) Heat-Shrinkable Tubing for Electrical Insulation
$49.20 D3150-00 Standard Specification for Crosslinked and Noncrosslinked Poly(Vinyl Chloride) Heat-Shrinkable Tubing for Electrical Insulation
$46.00 D350-13 Standard Test Methods for Flexible Treated Sleeving Used for Electrical Insulation
$55.20 D350-09 Standard Test Methods for Flexible Treated Sleeving Used for Electrical Insulation
$55.20 D350-08 Standard Test Methods for Flexible Treated Sleeving Used for Electrical Insulation
$55.20 D350-01 Standard Test Methods for Flexible Treated Sleeving Used for Electrical Insulation
$55.20 D350-96 Standard Test Methods for Flexible Treated Sleeving Used for Electrical Insulation
$41.00 D3554-07(2013) Standard Specification for Track-Resistant Black Thermoplastic High-Density Polyethylene Insulation for Wire and Cable, 75 °C Operation
$49.20 D3554-07 Standard Specification for Track-Resistant Black Thermoplastic High-Density Polyethylene Insulation for Wire and Cable, 75 °C Operation
$49.20 D3554-01 Standard Specification for Track-Resistant Black Thermoplastic High-Density Polyethylene Insulation for Wire and Cable, 75oC Operation
$49.20 D3554-98 Standard Specification for Track-Resistant Black Thermoplastic High-Density Polyethylene Insulation for Wire and Cable, 75oC Operation
$41.00 D3555-07(2013) Standard Specification for Track-Resistant Black Crosslinked Polyethylene Insulation for Wire and Cable, 90 °C Operation
$49.20 D3555-07 Standard Specification for Track-Resistant Black Crosslinked Polyethylene Insulation for Wire and Cable, 90°C Operation
$49.20 D3555-01 Standard Specification for Track-Resistant Black Crosslinked Polyethylene Insulation for Wire and Cable, 90oC Operation
$49.20 D3555-98 Standard Specification for Track-Resistant Black Crosslinked Polyethylene Insulation for Wire and Cable, 90oC Operation
$46.00 D3664-16 Standard Specification for Biaxially Oriented Polymeric Resin Film for Capacitors in Electrical Equipment
$55.20 D3664-04(2009) Standard Specification for Biaxially Oriented Polymeric Resin Film for Capacitors in Electrical Equipment
$55.20 D3664-04 Standard Specification for Biaxially Oriented Polymeric Resin Film for Capacitors in Electrical Equipment
$55.20 D3664-00 Standard Specification for Biaxially Oriented Polymeric Resin Film for Capacitors in Electrical Equipment
$49.20 D4244-95 Standard Specification for General-Purpose, Heavy-Duty, and Extra-Heavy-Duty Acrylonitrile-Butadiene/Poly(vinyl Chloride) (NBR/PVC) Jackets for Wire and Cable
$49.20 D4244-95(2001) Standard Specification for General-Purpose, Heavy-Duty, and Extra-Heavy-Duty Acrylonitrile-Butadiene/Poly(Vinyl Chloride) (NBR/PVC) Jackets for Wire and Cable (Withdrawn 2007)
$41.00 D4245-08(2013) Standard Specification for Ozone-Resistant Thermoplastic Elastomer Insulation For Wire and Cable, 90°C Dry/75°C Wet Operation
$49.20 D4245-08 Standard Specification for Ozone-Resistant Thermoplastic Elastomer Insulation For Wire and Cable, 90°C Dry/75°C Wet Operation
$49.20 D4245-02 Standard Specification for Ozone-Resistant Thermoplastic Elastomer Insulation For Wire and Cable, 90°C Dry/75°C Wet Operation
$49.20 D4245-97 Standard Specification for Ozone-Resistant Thermoplastic Elastomer Insulation For Wire and Cable, 90°C Dry/75°C Wet Operation
$41.00 D4246-14 Standard Specification for Ozone-Resistant Thermoplastic Elastomer Insulation For Wire and Cable, 90°C Operation
$49.20 D4246-02(2010) Standard Specification for Ozone-Resistant Thermoplastic Elastomer Insulation For Wire and Cable, 90°C Operation
$49.20 D4246-02 Standard Specification for Ozone-Resistant Thermoplastic Elastomer Insulation For Wire and Cable, 90°C Operation
$49.20 D4246-97 Standard Specification for Ozone-Resistant Thermoplastic Elastomer Insulation For Wire and Cable, 90°C Operation
$49.20 D4313-12 Standard Specification for General-Purpose, Heavy-Duty, and Extra-Heavy-Duty Crosslinked Chlorinated Polyethylene (CM) Jackets For Wire and Cable
$49.20 D4313-03(2010) Standard Specification for General-Purpose, Heavy-Duty, and Extra-Heavy-Duty Crosslinked Chlorinated Polyethylene (CM) Jackets For Wire and Cable
$49.20 D4314-12 Standard Specification for General-Purpose, Heavy-Duty, and Extra-Heavy-Duty Crosslinked Chlorosulfonated Polyethylene (CSM) Jackets For Wire and Cable (Withdrawn 2017)
$49.20 D4314-05 Standard Specification for General-Purpose, Heavy-Duty, and Extra-Heavy-Duty Crosslinked Chlorosulfonated Polyethylene (CSM) Jackets For Wire and Cable
$49.20 D4314-99 Standard Specification for General-Purpose, Heavy-Duty, and Extra-Heavy-Duty Crosslinked Chlorosulfonated Polyethylene (CSM) Jackets For Wire and Cable
$46.00 D4325-13 Standard Test Methods for Nonmetallic Semi-Conducting and Electrically Insulating Rubber Tapes
$55.20 D4325-08 Standard Test Methods for Nonmetallic Semi-Conducting and Electrically Insulating Rubber Tapes
$55.20 D4325-02 Standard Test Methods for Nonmetallic Semi-Conducting and Electrically Insulating Rubber Tapes
$55.20 D4325-97 Standard Test Methods for Nonmetallic Semi-Conducting and Electrically Insulating Rubber Tapes
$49.20 D4363-12 Standard Specification for Thermoplastic Chlorinated Polyethylene (CM) Jacket for Wire and Cable
$49.20 D4363-98(2010) Standard Specification for Thermoplastic Chlorinated Polyethylene (CM) Jacket for Wire and Cable
$49.20 D4363-98(2003) Standard Specification for Thermoplastic Chlorinated Polyethylene (CM) Jacket for Wire and Cable
$49.20 D4363-98 Standard Specification for Thermoplastic Chlorinated Polyethylene (CM) Jacket for Wire and Cable
$41.00 D4388-13 Standard Specification for Nonmetallic Semi-Conducting and Electrically Insulating Rubber Tapes
$49.20 D4388-08 Standard Specification for Nonmetallic Semi-Conducting and Electrically Insulating Rubber Tapes
$49.20 D4388-02 Standard Specification for Nonmetallic Semi-Conducting and Electrically Insulating Rubber Tapes
$49.20 D4388-97 Standard Specification for Nonmetallic Semi-Conducting and Electrically Insulating Rubber Tapes
$41.00 D4514-12 Standard Specification for Friction Tape
$49.20 D4514-06 Standard Specification for Friction Tape
$49.20 D4514-00 Standard Specification for Friction Tape
$46.00 D4568-13 Standard Test Methods for Evaluating Compatibility Between Cable Filling and Flooding Compounds And Polyolefin Wire and Cable Materials
$55.20 D4568-99(2009) Standard Test Methods for Evaluating Compatibility Between Cable Filling and Flooding Compounds And Polyolefin Wire and Cable Materials
$55.20 D4568-99(2004)e1 Standard Test Methods for Evaluating Compatibility Between Cable Filling and Flooding Compounds And Polyolefin Wire and Cable Materials
$55.20 D4568-86 Standard Test Methods for Evaluating Compatibility Between Cable Filling and Flooding Compounds and Polyolefin Cable Materials
$41.00 D4652-05(2012) Standard Specification for Silicone Fluid Used for Electrical Insulation
$49.20 D4652-05 Standard Specification for Silicone Fluid Used for Electrical Insulation
$49.20 D4652-92(1997) Standard Specification for Silicone Fluid Used for Electrical Insulation
$46.00 D5213-12 Standard Specification for Polymeric Resin Film for Electrical Insulation and Dielectric Applications
$55.20 D5213-04 Standard Specification for Polymeric Resin Film for Electrical Insulation and Dielectric Applications
$55.20 D5213-99 Standard Specification for Polymeric Resin Film for Electrical Insulation and Dielectric Applications
$49.20 D532-90 Specification for Natural Rubber Jacket for Wire and Cable (Withdrawn 1996)
$41.00 D6096-11(2016) Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 90°C Operation
$49.20 D6096-11 Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 90°C Operation
$49.20 D6096-07 Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 90 °C Operation
$49.20 D6096-02 Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 90°C Operation
$49.20 D6096-97 Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 90°C Operation
$46.00 D6097-16 Standard Test Method for Relative Resistance to Vented Water-Tree Growth in Solid Dielectric Insulating Materials
$55.20 D6097-01a(2008)e1 Standard Test Method for Relative Resistance to Vented Water-Tree Growth in Solid Dielectric Insulating Materials
$55.20 D6097-01a Standard Test Method for Relative Resistance to Vented Water-Tree Growth in Solid Dielectric Insulating Materials
$55.20 D6097-01 Standard Test Method for Relative Resistance to Vented Water-Tree Growth in Solid Dielectric Insulating Materials
$55.20 D6097-97a Standard Test Method for Relative Resistance to Vented Water-Tree Growth in Solid Dielectric Insulating Materials
$41.00 D618-13 Standard Practice for Conditioning Plastics for Testing
$49.20 D618-08 Standard Practice for Conditioning Plastics for Testing
$49.20 D618-05 Standard Practice for Conditioning Plastics for Testing
$49.20 D618-00 Standard Practice for Conditioning Plastics for Testing
$55.20 D6272-10 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
$55.20 D6272-02(2008)e1 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
$55.20 D6272-02 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
$55.20 D6272-00 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
$46.00 D69-12 Standard Test Methods for Friction Tapes
$55.20 D69-06 Standard Test Methods for Friction Tapes
$55.20 D69-01 Standard Test Methods for Friction Tapes
$55.20 D69-96 Standard Test Methods for Friction Tapes
$46.00 D710-13 Standard Specification for Vulcanized Fibre Sheets, Rods, and Tubes Used for Electrical Insulation
$55.20 D710-97(2009)e1 Standard Specification for Vulcanized Fibre Sheets, Rods, and Tubes Used for Electrical Insulation
$55.20 D710-97 Standard Specification for Vulcanized Fibre Sheets, Rods, and Tubes Used for Electrical Insulation
$55.20 D710-97(2002) Standard Specification for Vulcanized Fibre Sheets, Rods, and Tubes Used for Electrical Insulation
$62.40 D7793-16 Standard Specification for Insulated Vinyl Siding
$62.40 D7793-13 Standard Specification for Insulated Vinyl Siding
$62.40 D7793-12 Standard Specification for Insulated Vinyl Siding
$46.00 D785-08(2015) Standard Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials
$55.20 D785-08 Standard Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials
$55.20 D785-03 Standard Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials
$55.20 D785-98e1 Standard Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials
$62.40 D790-15e2 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
$62.40 D790-15e1 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
$62.40 D790-15 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
$62.40 D790-10 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
$62.40 D790-07e1 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
$62.40 D790-07 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
$62.40 D790-03 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
$55.20 D790-02 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
$55.20 D790-00 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
$52.00 D876-13 Standard Test Methods for Nonrigid Vinyl Chloride Polymer Tubing Used for Electrical Insulation
$62.40 D876-09 Standard Test Methods for Nonrigid Vinyl Chloride Polymer Tubing Used for Electrical Insulation
$62.40 D876-00(2007)e1 Standard Test Methods for Nonrigid Vinyl Chloride Polymer Tubing Used for Electrical Insulation
$62.40 D876-00 Standard Test Methods for Nonrigid Vinyl Chloride Polymer Tubing Used for Electrical Insulation
$41.00 D922-11 Standard Specification for Nonrigid Vinyl Chloride Polymer Tubing
$49.20 D922-00a(2006) Standard Specification for Nonrigid Vinyl Chloride Polymer Tubing
$49.20 D922-00a Standard Specification for Nonrigid Vinyl Chloride Polymer Tubing
$46.00 E2769-16 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
$55.20 E2769-15 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
$55.20 E2769-13 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
$55.20 E2769-11 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
$52.00 F1236-16 Standard Guide for Visual Inspection of Electrical Protective Rubber Products
$62.40 F1236-15 Standard Guide for Visual Inspection of Electrical Protective Rubber Products
$62.40 F1236-14 Standard Guide for Visual Inspection of Electrical Protective Rubber Products
$55.20 F1236-96(2012) Standard Guide for Visual Inspection of Electrical Protective Rubber Products
$62.40 F1236-96(2007) Standard Guide for Visual Inspection of Electrical Protective Rubber Products
$62.40 F1236-96(2001) Standard Guide for Visual Inspection of Electrical Protective Rubber Products
$46.00 F1837M-97(2012)e1 Standard Specification for Heat-Shrink Cable Entry Seals (Metric)
$55.20 F1837M-97(2007) Standard Specification for Heat-Shrink Cable Entry Seals (Metric)
$52.00 D1000-17 Standard Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications
$41.00 D2219-17 Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 60°C Operation
$41.00 D2220-17 Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 75°C Operation
$46.00 D6272-17 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
$52.00 D7793-17 Standard Specification for Insulated Vinyl Siding
$52.00 D790-17 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
$41.00 D4363-17 Standard Specification for Thermoplastic Chlorinated Polyethylene (CM) Jacket for Wire and Cable
$41.00 D2655-17 Standard Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 0 to 2000 V
$41.00 D4313-17 Standard Specification for General-Purpose, Heavy-Duty, and Extra-Heavy-Duty Crosslinked Chlorinated Polyethylene (CM) Jackets For Wire and Cable